Grid: The grid can be used to quickly change the Pan and Tilt values. You will see the slider update as you move.
Pan: This will pan all selected heads. This also works as an offset to any other commands like Fan and a Path.
Tilt: This will tilt all selected heads. This also works as an offset to any other commands like Fan and a Path.
Fan Pan: This sets the number of degrees to fan each head in the pan direction.
Fan Tilt: This sets the number of degrees to fan each head in the tilt direction.
Groupings: Divides the selected heads into groups of 1 through 6. So if you have 8 heads with a grouping of 2 then the first
4 heads will fan and the second 4 heads will fan. Heads 1 and 5 will point the same direction and so on.
Cycles: Change the motion speed of a head.
Presets: Presets can be saved and an icon will be created to quickly recall those settings. It will try to draw a representation
of the angle the heads are pointing and their colors.
.png)
Draw paths the same way as the Sketch effect. I had to make some improvements to allow a path to close properly.
Scale: You can draw a circle and then use the Scale slider to make the head move in a smaller or larger circle.
Time Offset: This will stagger each selected head so they aren't all in the same position on the path.
Ignore Pan: Ignores the pan part of the path
Ignore Tilt: Ignores the tilt part of the path
Presets: Presets can be saved and an icon is generated that can be clicked to quickly recall the path settings.
.png)
Click anywhere in the color circle to select a color for all selected heads.
You can click and drag the circle around to change the color.
If you Shift-Left click you can define additional circles and a number appears inside the circle.
Multiple circles will cause the effect to do a colorwash through the selected colors.
Click a circle and press the delete key to remove one.
The color bar at the bottom can be used to dial down the brightness of the selected color.
.png)
.png)