From cc10c5adae2a393e9c700735f5c889a14b8cb385 Mon Sep 17 00:00:00 2001 From: tee Date: Tue, 1 Nov 2016 23:22:34 +0100 Subject: [PATCH] updated README.hardware --- README.hardware | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/README.hardware b/README.hardware index 384992f..91a5daa 100644 --- a/README.hardware +++ b/README.hardware @@ -20,12 +20,13 @@ signal is fed into one analogue input of the arduino that sends it via usb. piezos/switches -> multiplexer -> arduino -> usb -> computer -the arduino sketch has some preprocessor directives for a mapping from any controller number to the desired values in pure data. the -connected hardware should be adjusted in ardrum.pde. +the arduino sketch has some preprocessor directives for a mapping from any controller number to the desired values in pure data. the connected hardware should be adjusted in ardrum.ino. +if the hardware is supposed to work with higher input voltages than 5V, extra circuitry would be necessary to protect the MCU/MUX inputs. +the arduino sketch was written when the .pde naming was hip, ymmv. -(c) 2011-2015 wotwot +(c) 2011-2038 wotwot license: cc-by-nc-sa parts (c) by others