To measure the audio response of your transmitter, you can generate an audio file, transmit it, receive it, record it and compare the spectrograms between the original and the recorded audio. Adjusting filters, equalisers, gain and other transceiver settings will result in the spectrogram changing.
Note that I'm using a Raspberry Pi, an RTLSDR dongle, an antenna, a Yaesu FT-857d and a dummy load. This is NOT required. See below for alternative hardware details.
Some example spectrograms can be found on the project page.
The transmit hardware is a Yaesu FT-857d connected to a dummy load, using 5 Watts FM.
The receive hardware is a Raspberry Pi connected to an RTL SDR v3 dongle with a telescopic rabbit ear antenna (that came with the dongle).
This project will work just as well using alternative hardware. Although I'm using the specified hardware, the aim is to get an audio file to play on a transmitter and to record it off air from a receiver. If you have digital modes like FT8 or WSPR working, you're most of the way there.
You can even use simpler tools than that. For example, you can play the audio file with your mobile phone into the microphone of your radio and record it off air with your computer, or a handheld recorder.
This collection of bash scripts relies heavily on SoX which is a cross-platform (Windows, Linux, MacOS X, etc.) command line utility that can convert various formats of computer audio files in to other formats. It also has the ability to generate spectrograms.
The audio is received by a dongle using rtl_fm, but any tool that generates a WAV file will suffice.
- Generate the audio sweep files using
make_sweep. - Pick a transmitter frequency that both the transmitter and receiver can tune to. Pay attention to the bandplan in your country!
- Start recording with
record-fm- example:record-fm 146.450M 55 - Transmit audio with
auto_cq- example:auto_cq fm.double-sweep.48k.wav - Adjust your transmitter gain or any other setting you want to explore: TX filter, Clarifier, VOX-gain, etc.
- Experiment with receive settings, RX filter, etc.
- Stop
auto_cqusing Ctrl-C. - Stop
record-fmusing Ctrl-C. - Create spectrograms using
spectrogram- example:spectrogram *.wav - Compare the pictures.
- bash
- SoX
- rtl_fm (optional)
 |
|---|
| Single frequency sweep, 0 to 5 kHz, 5 seconds. |
 |
|---|
| Double frequency sweep, 0 to 5 kHz, 5 seconds. |
 |
|---|
| Double frequency sweep, 0 to 15 kHz, 5 seconds. |
Onno (VK6FLAB) cq@vk6flab.com