Replies: 54 comments 35 replies
-
|
@metaljay Thanks for offering this service. I received my module in 6 days from UK to USA. As I said in my email to you, I'm up to my @$$ in alligators right now and I really appreciated you providing a pre-assembled module complete with firmware. I was able to get up and running quickly and can stay focused on the other things demanding my attention right now. Thanks again, |
Beta Was this translation helpful? Give feedback.
-
|
Hey, So you still have some of these boards avaialble? Regard |
Beta Was this translation helpful? Give feedback.
-
|
I do, drop me an email if you’re interested. You’ll need to confirm if your pump is 4 or 6 wire. |
Beta Was this translation helpful? Give feedback.
-
|
Ordered my board which arrived quickly. |
Beta Was this translation helpful? Give feedback.
-
|
I dropped a reply on another thread but I am interested in these if you still have one. |
Beta Was this translation helpful? Give feedback.
-
|
I do, send me an email above. |
Beta Was this translation helpful? Give feedback.
-
|
Still have some of these if anyone interested |
Beta Was this translation helpful? Give feedback.
-
|
Hi, also interested, I dropped you an email! |
Beta Was this translation helpful? Give feedback.
-
|
I received mine in NL and it worked great. First i had some trouble, but got all the support needed to get things going. If you are looking for this i can recommend getting it from him! :) |
Beta Was this translation helpful? Give feedback.
-
|
Dropping you an email now ;) |
Beta Was this translation helpful? Give feedback.
-
|
Received kit yesterday, will put together tomorrow. Watch this space :) |
Beta Was this translation helpful? Give feedback.
-
|
Kit went together without any issues, all flashed and connected to my wifi. Before I fit it to the pump I want to print the enclosure I designed this afternoon. Preview below:
|
Beta Was this translation helpful? Give feedback.
-
|
Would you be willing to share the print file for this? |
Beta Was this translation helpful? Give feedback.
-
|
Yes sure, I'd always planned to do so. Will sort either later today or tomorrow. |
Beta Was this translation helpful? Give feedback.
-
|
Did you ever share this somewhere? |
Beta Was this translation helpful? Give feedback.
-
|
Hi @robxbl69 , can we receive the print file (as you promised ;-) ) ? |
Beta Was this translation helpful? Give feedback.
-
|
Still got some? |
Beta Was this translation helpful? Give feedback.
-
|
I do, drop me an email. |
Beta Was this translation helpful? Give feedback.
-
|
Sent email |
Beta Was this translation helpful? Give feedback.
-
|
Received built and ready to install, thanks for help and support |
Beta Was this translation helpful? Give feedback.
-
|
Just got my kit yesterday and have it installed and working. Thanks for the quick shipping! |
Beta Was this translation helpful? Give feedback.
-
|
Add another happy customer here. Thanks! |
Beta Was this translation helpful? Give feedback.
-
|
I got my kit today, looking forward to install it asap! :) |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I am also interested. I just dropped you an email! thank you in advance. |
Beta Was this translation helpful? Give feedback.
-
|
Sent you an email. if you still have any 6 wire board ready i would like to prchase one. Thanks in advance. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks @metaljay , what a service 😄 |
Beta Was this translation helpful? Give feedback.
-
|
Wiring for S200102 will be the same? |
Beta Was this translation helpful? Give feedback.
-
|
You’ll have to open your pump to confirm if it’s 6 or 4 wire version to be 100% |
Beta Was this translation helpful? Give feedback.
-
|
@metaljay Thank you, the pcb works very good! Fast response to my questions. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks @metaljay Received super fast. Cheers! Getting the same issue as a few people here: #673 What pump do you have? |
Beta Was this translation helpful? Give feedback.
-
|
@metaljay do you know if you've had anyone get the S100102 pump working with the kit with the red LLC? Wondering if I should just buy another soldered by you to confirm it's not my soldering. |
Beta Was this translation helpful? Give feedback.
-
|
Could you take a few photos of your soldering? What pump config have you selected? my pump is 101 and I select 6 wire pre 2021 |
Beta Was this translation helpful? Give feedback.
-
|
6 wire pre 2021 same as you. Miami it says on the webpage. The tub is a Hollywood.
My soldering on the llc is not so great having had another look. |
Beta Was this translation helpful? Give feedback.
-
|
Hello ! The spa display dont work anymore since several days..., all is ok from wifi. Previously all works perfectly...On the spa display when I press buttons there is no longueur bip. And if I press a buttons on thé spa display nothing work. Maybe I have accidentaly tick something wrong in the menu ? Thanks by advance ! |
Beta Was this translation helpful? Give feedback.
-
|
Thanks a lot, I will check and reset if necessary, I will let you know, thx by advance. |
Beta Was this translation helpful? Give feedback.
-
|
Hello I have check this week end so,
|
Beta Was this translation helpful? Give feedback.
-
|
Sorry I didn’t get a notation for this, have you tried removing and replacing the red board whilst there is power to the main board? Are you able to connect via the web still? |
Beta Was this translation helpful? Give feedback.
-
|
Hello ! I have use your previous advice (removing and replacing the red board whilst there is power) and all works fine now, Thanks for your precious help ! |
Beta Was this translation helpful? Give feedback.
-
Glad it works, but this appears to show there is a problem with the LLC (red board) hopefully doesn’t occur again but might be worth checking the pins on it for any corrosion or damage. |
Beta Was this translation helpful? Give feedback.
-
|
Hello! |
Beta Was this translation helpful? Give feedback.
-
|
I got the assembled and preprogrammed kit (took almost 4 weeks for Romania post office to inform me about arrival from UK ... :-[ ) Other than that it all works fine. Just pluggen in, setup wifi, and all works, I'm printing these days an enclosure (might put inside a small silicagel bag to reduce the moisture). Currently I use the layzspa.local web page to control it, via port forwarding in router. In future maybe HomeAssistant will take over. Thanks for the kit @metaljay! |
Beta Was this translation helpful? Give feedback.
-
|
Just received a fully assembled kit from @metaljay. Work perfectly, as expected. Integration with HA works great. I have MAIAMI Model S100102 (6 wire, 2021 (air)) |
Beta Was this translation helpful? Give feedback.
-
|
Did you use the A ports or B ports? Did you shorten the wires? Do you have a photo?
About to disassemble mine for the third time and take some photos to work out what I’ve done wrong.
Thanks.
|
Beta Was this translation helpful? Give feedback.
-
|
Sorry I missed this question, I use the B ports and do not shorten the cables. I follow the guide directly 😁 |
Beta Was this translation helpful? Give feedback.
-
|
I got the 6 Wire assembled unit yesterday. Installed it and configured to my S100101 pump. Great service and quick in responding on the e-mails. If you don't want the hassle ordering everything apart from each other or even solder your own, I suggest taking one from here. |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
Hi . I am very interested in purchasing a kit . how do i know if my unit is four or six wires? |
Beta Was this translation helpful? Give feedback.
-
|
Open the pump up and take a look, it’s just 4 screws most pumps 2021+ are all 6 wire though |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I'm very interested in purchasing one of these, is there an option to set the heating and pump to a timer within the interface. |
Beta Was this translation helpful? Give feedback.
-
|
Yes, it’s worth reading the manual so you know the capabilities. Drop me an email |
Beta Was this translation helpful? Give feedback.
-
|
Done |
Beta Was this translation helpful? Give feedback.
-
|
Hi, are kits still available? :) |
Beta Was this translation helpful? Give feedback.
-
|
Yes, drop me an email if your interested |
Beta Was this translation helpful? Give feedback.
-
|
Just got mine and wired it up, thanks! |
Beta Was this translation helpful? Give feedback.
and others
-
I have kits still available!
There was surprisingly more interest than I expected from my previous post so decided to list again.
If you are struggling to solder or don’t want the hassle ordering all the small components and flashing.
Drop me an email if you are interested in purchasing. These are the latest V2B kits and have everything as per the guide.
I have both 4 and 6 wire kits available. Though for the 4 wire kits I am unable to test as I don’t have a 4 wire pump.
Mainland UK is £4 postage and usually next working day
USA/Canada is £10 (marked as gift to keep costs down) - usually 3-5 working days
Europe is £8 (marked as gift to keep costs down) - usually 6-7 working days
I can post tracked if you want, usually £3 or £4 more but gives you insurance if lost.
Happy for PayPal or bank transfer.
Drop me an email to discuss: warps_gazers_0j@icloud.com (iCloud hide my email address)
Its worth noting, I'm not a business - I'm just one guy so whilst I'm usually pretty quick it may be a week before I can make one up.
Thanks
A few photos of previous ones:
Beta Was this translation helpful? Give feedback.
All reactions