English | 简体中文 | 繁體中文 | 日本語 | Deutsch | 한국어
The MCP4725 is a low-power, high accuracy, single channel, 12-bit buffered voltage output Digital-to-Analog Convertor (DAC) with non-volatile memory (EEPROM). Its on-board precision output amplifier allows it to achieve rail-to-rail analog output swing. The DAC input and configuration data can be programmed to the non-volatile memory (EEPROM) by the user using I2C interface command. The non-volatile memory feature enables the DAC device to hold the DAC input code during power-off time, and the DAC output is available immediately after power-up. This feature is very useful when the DAC device is used as a supporting device for other devices in the network. The device includes a Power-On-Reset (POR) circuit to ensure reliable power-up and an on-board charge pump for the EEPROM programming voltage. The DAC reference is driven from VDD directly. In powerdown mode, the output amplifier can be configured to present a known low, medium, or high resistance output load.The MCP4725 has an external A0 address bit selection pin. This A0 pin can be tied to VDD or VSS of the user’s application board.The MCP4725 has a two-wire I2C. compatible serial interface for standard (100 kHz), fast (400 kHz), or high speed (3.4 MHz) mode. The MCP4725 is an ideal DAC device where design simplicity and small footprint is desired, and for applications requiring the DAC device settings to be saved during power-off time. The device is available in a small 6-pin SOT-23 package. MCP4725 is used in sensor calibration, closed-loop servo control, low-power portable instruments, PC peripherals and data acquisition system.
LibDriver MCP4725 is a full function MCP4725 driver launched by LibDriver.It provides DAC output and DAC output value reading function. LibDriver is MISRA compliant.
/src includes LibDriver MCP4725 source files.
/interface includes LibDriver MCP4725 IIC platform independent template。
/test includes LibDriver MCP4725 driver test code and this code can test the chip necessary function simply。
/example includes LibDriver MCP4725 sample code.
/doc includes LibDriver MCP4725 offline document.
/datasheet includes MCP4725 datasheet。
/project includes the common Linux and MCU development board sample code. All projects use the shell script to debug the driver and the detail instruction can be found in each project's README.md.
Reference /interface IIC platform independent template and finish your platform IIC driver.
Add /src, /interface and /example to your project.
uint8_t res;
res = mcp4725_basic_init(MCP4725_ADDR_A0_GND);
if (res != 0)
{
return 1;
}
...
res = mcp4725_basic_write(1.2f);
if (res != 0)
{
mcp4725_interface_debug_print("mcp4725: write failed.\n");
(void)mcp4725_basic_deinit();
...
return 1;
}
...
(void)mcp4725_basic_deinit();
return 0;
Online documents: https://www.libdriver.com/docs/mcp4725/index.html
Offline documents: /doc/html/index.html
Please sent an e-mail to lishifenging@outlook.com
Copyright (c) 2015 - present LibDriver All rights reserved
The MIT License (MIT)
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
Please sent an e-mail to lishifenging@outlook.com