Build script to build a Debian 12 image for FriendlyELEC NanoPi RK3328 based boards, as well as all dependencies. This includes the following:
- Mainline Linux Kernel - linux-6.7.y
- Arm Trusted Firmware - arm-trusted-firmware/master branch
- Mainline U-Boot - v2024.04-rc3
Note that there are patches/modifications applied to the kernel and u-boot. The changes made can be seen in the ./patches and ./overlay directories. Also, a ./downloads directory is generated to store a copy of the toolchain during the first build.
Currently images for the following devices are generated:
- FriendlyELEC NanoPi Neo3
- FriendlyELEC NanoPi R2S
- The following packages below are required to use this build script. Note that this repo uses a Dockerfile to handle most of the heavy lifting, but some system requirements still exist.
docker-ce losetup wget sudo make qemu-user-static
Note that without qemu-user-static, debootstrap will fail!
- Just run
make. - Completed builds output to
./output - To cleanup and clear all builds, run
make clean
Other helpful commands:
- Have a build fail and have stale mounts?
make mountclean - Want to delete the download cache and do a 100% fresh build?
make distclean
- Take your completed image from
./outputand extract it with gunzip - Flash directly to an SD card. Example:
dd if=./neo3*.img of=/dev/mmcblk0 bs=4M conv=fdatasync
- You tell me. Bug reports and PRs welcome!
- This is a pet project that can change rapidly. Production use is not advised. Please only proceed if you know what you are doing!