A GO wrapper library for Microchip MCP2210 USB-to-SPI bridge

A C++ class that uses libusb to interface with MCP2210 devices. It can be used to control the several aspects, such as NVRAM or volatile configurations, GPIO directions and states, or to perform SPI transfers.

MCP2210 Configurator (mcp2210-conf) is an application that allows you to fully configure MCP2210 devices, including VID, PID, and other descriptors, as well as pin functions and states.

This is an open source C/C++ library for Microchip's USB-to-SPI protocol converter chip MCP2210. It works under Linux.

Allegro MicroSystems A4963 Driver Software for MCP2210 and Atmega32u4

A library of device configuration files specific for MCP2210 Configurator. You can learn more about this project at https://github.com/bloguetronica/mcp2210-conf.

A C++ class that uses libusb to interface with MCP2210 devices. It can be used to control the several aspects, such as NVRAM or volatile configurations, GPIO directions and states, or to perform SPI transfers. Note that this is a class variant made specifically for Qt. If you wish to use the original, non-Qt variant, please refer to https://gith…