32-bit MIPS processor written in Verilog while taking Digital Computer Architecture.
- Implements instructions from the MIPS instruction set.
- Five stage pipeline: Instruction Fetch (IF), Instruction Decode (ID), Execute (EX), Memory (MEM), and Write Back (WB).
- Data forwarding unit to eliminate data dependencies. Forwards from the MEM and WB stages to the EX stage.
- Hazard detection unit which stalls the pipelne to eliminate hazards such as the load-use hazard and inserts noops for branches and jumps.
- Separate instruction and data memories.
- Datapath with program counter, pipeline registers, register file, ALU, and other processor components.
- Main Controller and ALU Controller.
All simulation was done using ModelSim Starter Edition. The provided test benches in the simulation_files/ folder can be used to test the final datapath or individual components.
In order to run the simulations for the processor create a new project and add all of the files from the simulation_files/ and source_files/ folders. Compile and then go to Simulate -> Start Simulation and choose the appropriate testbench from the "work" directory. When simulating the datapath place the .hex files from the test programs/ folder in the root of the ModelSim project and change the file being read in rom.v from "data.hex" to the test to be run. Include signals from the UUT in the "sim" tab.
Included in the assembler_disassembler/ folder are a MIPS assembler and disassembler written in Python. The assembler can be used to generate a .mif file from a given assembly program. The disassembler can be used to turn machine code (from a .mif file) into an assembly file.