0.11.0

• core
  • gap: do not add ADFlags to advertising data for AdvertisingTypeNonConnInd, to leave room for FindMy data
  • gap: make generic services function for HCI separate function
  • update to latest version of Bluetooth numbers database for latest services/characteristics
• linux
  • gap: add implementation for SetRandomAddress() function
  • gap: correct HCI implementation so it can Configure/Start/Stop advertising correctly. Needed to update ServiceData after Advertisment is already started.
  • gap: update implementation for GAP to allow for calling adv.Configure() followed by adv.Start() followed by adv.Stop() multiple times. This is required in order to update advertising ServiceData.
  • fix: close signal on Connect for Linux platform to address issues raised in #262
  • reconnect connect/disconnect handlers centrals
  • Allow users to choose between different adapters
  • Issue #311 Clean resources properly when disable notifications
• hci
  • add advertiser support for ManufacturerData and ServiceData
  • contains several corrections needed for HCI on both ninafw and cyw43439
  • implement set random MAC address
  • store local address as MACAddress
  • use current MAC address when Advertiser, allowing support for random advertiser addresses
  • when advertising, do not send ADFlags if we are using AdvertisingTypeNonConnInd
  • implement connect handler for Advertiser for HCI
  • fix bluetooth initialization on cyw43439
  • actually parse of ServiceData and ManufacturerData when scanning, and use existing GAP implementation to do it
  • correct parsing of ServiceData and ManufacturerData and add some helpful constants
  • correct race condition from connection params in HCI implementation. Basically it was responding by calling a function that retriggered asking to change the parameters yet again. Yet we are not actually doing anything about this request at present.
  • ensure HCI send/receive buffers for ATT are large enough for maximum MTU length
  • ensure that HCI advertising interval is set to a default value, otherwise different adverting types do not work correctly
  • reconnect connect/disconnect handlers for centrals
  • fix: set HCI default Advertising Interval to a more sensible default
  • enable setting MACAddr for cyw43439
• nordic semi
  • nrf51: add SetRandomAddress() function when Advertisment
  • nrf528xx: add SetRandomAddress() function when Advertiser
  • nrf528xx: correctly use the passed Advertising options type as the type passed into the SoftDevice struct for API call
    update the EnableNotifications Method, add the parameter to specifing… (#293)
• windows
  • gap/windows: add stubbed function for SetRandomAddress()
  • reconnect connect/disconnect handlers for centrals
• examples
  • add example showing how to create a peripheral using the Battery Service
  • add example showing how to create a peripheral using the Device Information Service
  • add example to broadcast advertising servicedata
  • improve heartrate examples by adding all of the required characteristics for it to fulfill the complete heart rate profile in the spec.
  • refactor tinyscan to use tinyterm/displays package and also add badger2040-w
• build
  • remove macOS 11 build since it has been removed, and run macOS 14 instead (#285)
  • remove macOS 12 runner
• docs
  • update README to include Windows CI badge and correctly updated info about current capabilities
  • update README with some links and clarifications
  • license: update year to 2025

0.10.0

• core
  • gap: fix ServiceDataElement.UUID comment
• docs
  • add mention of support for rp2040-W to README
  • Improve documentation of RSSI Fixes #272
• hci
  • cyw43439: HCI implementation
  • refactor to separate HCI transport implementation from interface to not always assume UART.
  • update for cyw43439 HCI functionality
• windows
  • Add Address field to Windows Device struct
  • Winrt full support (#266)
  • winrt-go: bump to latest
  • assign char handle write event (#274)
• test
  • add hci_uart based implementation to smoke tests

0.9.0

• build
  • add arduino-nano33 and pyportal to smoke tests
  • add nina-fw smoketest as peripheral
  • add some ninafw examples to smoketest
• core
  • add ServiceData advertising element (#243)
  • add RequestConnectionParams to request new connection parameters
  • change ManufacturerData from a map to a slice
  • don't use a pointer receiver for many method calls
  • make Device a value instead of a pointer
  • use 'debug' variable protected by build tags for debug logging
  • use Device instead of Address in SetConnectHandler
• docs
  • a small mention of the NINA BLE support
  • complete README info about nina-fw support
• linux
  • fix characteristic value
  • rewrite everything to use DBus directly
• macos
  • add Write command to the gattc implementation
• examples
  • tinyscan to replace clue-scanner, also works on pyportal and pybadge+airlift
  • update MCU central examples to use ldflags to pass the desired device to connect to
  • discover: add MTU
• hci
  • add check for poll buffer overflow
  • allow for both ninafw and pure hci uart adapter implementations
  • implement Characteristic WriteHandler
  • multiple connections
  • return service UUIDs with scan results
  • add l2cap signaling support
  • implement evtNumCompPkts to count in-flight packets
  • correct implementation for WriteWithoutReponse
  • speed up time waiting for hardware - corrections to MTU exchange
  • add support for software RTS/CTS flow control for boards where hardware support is not available
  • BLE central implementation on nina-fw co-processors
  • fix connection timeout
  • implement BLE peripheral support
  • implement GetMTU()
  • remove some pointer receivers from method calls
  • should support muliple connections as a central
  • correctly return from read requests instead of returning spurious error
  • move some steps previously being done during Configure() into Start() where they more correctly belonged.
  • use advertising display name as the correct default value for the generic access characteristic.
  • speed up the polling for new notifications for Centrals
  • use NINA settings from board file in main TinyGo repo
• nordic semi
  • replace unsafe.SliceData call with expression that is still supported in older Go versions
  • update to prepare for changes in the TinyGo CGo implementation
  • add address of connecting device
  • add support for connection timeout on connect
  • don't send a notify/indicate without a CCCD
  • fix connect timeout
  • fix writing to a characteristic
  • print connection parameters when debug is enabled
  • return an error on a connection timeout
• windows
  • Release AsyncOperationCompletedHandler (#208)
  • check for error when scanning
  • bump to latest winrt

0.8.0

• build
  • remove CGo dependencies for Windows cross-compiler tests
  • add Windows to GH actions build jobs
  • add macOS 12 to GH actions build jobs
• core
  • go 1.18 and remove old-style build tags
  • Noescape workaround
• docs
  • update README to remove CGo requirement for Windows
  • add documentation to heartrate-monitor
• linux
  • Added option to add ManufacturerData to Advertisement
• macos
  • enable support for duplicate chars by moving from a map to a slice
• examples
  • Include WriteWithoutResponse permission, for examples, where Write exists
• nordic semi
  • softdevice: added manufacturer data support
  • softdevice: test creation of raw BLE advertisement packets
• windows
  • update github.com/saltosystems/winrt-go to no longer require CGo

0.7.0

• build
  • switch to ghcr.io for docker container
  • update to actions/checkout@v3
  • work around for CVE-2022-24765
• core
  • gap: Set and SetRandom methods should have a pointer receiver
  • mtu-{darwin,linux,windows,sd}: add get mtu function
  • remove Addresser
  • update uuid generation
• docs
  • CONTRIBUTING: add note on new APIs
  • correct badge link for GH actions
  • README: add note on macOS Big Sur and iTerm2
• linux
  • do not randomize order of returned discovered services/chars
  • fix characteristic scan order
  • implement disconnect handling
• macos
  • implement disconnect handling
  • fix characteristic scan order
• examples
  • add examples/stop-advertisement
• nordic semi
  • nrf528xx: handle BLE_GAP_EVT_PHY_UPDATE_REQUEST and explicitly ignore some other events
  • softdevice: avoid a heap allocation in the SoftDevice event handler
• windows
  • Added Indicate support to Windows driver
  • gap/windows: Scan should set scanning mode to active to match other platforms
  • support empty manufacturer data
  • winrt-go: bump to latest

0.6.0

• core
  • unify UUID16 creation for all platforms
  • Improve UUID (#107)
  • gap: stop advertising
  • advertising: add manufacturer data field to advertisement payload
• linux
  • gap: workaround for muka/go-bluetooth#163
  • update to latest muka/go-bluetooth
• windows
  • add characteristic read, write and notify operations
  • add characteristic discovery
  • add service discovery
  • add device connection and disconnection
  • add winrt-go dependency and remove manually generated code
  • disable cache when reading characteristics
• macos
  • update to tinygo-org fork of cbgo v0.0.4
  • use the same UUID format as expected by other standard
• docs
  • update README with info on Windows support
• build
  • add Github Action based CI build (#108)

0.5.0

• core
  • update to drivers 0.20.0
  • Fix ParseMAC bug
  • Add //go:build lines for Go 1.18
• nordic semi
  • nrf: fix CGo errors after TinyGo update

0.4.0

• core
  • adapter: add host address function
• linux
  • fixes bluez 0.55 service registration
  • update muka/go-bluetooth to latest version
  • gattc/linux: DiscoverServices times out in 10s
• macos
  • make Adapter.Connect thread-safe
• nordic semi
  • nrf51: fix assertHandler function signature
  • nrf: add support for S113 SoftDevice
  • nrf: update s140v7 SoftDevice version to latest, 7.3.0
• examples
  • add scanner for Adafruit Clue
• build
  • circleci: update xcode in use to 10.3.0
  • modules: add tinyterm package for clue example

v0.3.0

• core
  • generate standard service and characteristic UUIDs from Nordic Semiconductor bluetooth numbers database
• linux
  • downgrade to older version of go-bluetooth that appears to work correctly with BlueZ 5.50
• macos
  • properly handle 16-bit UUIDs for service and characteristics in the unique format used by macOS
• docs
  • add a few details on some newly supported boards
• examples
  • use standard service and characteristic UUIDs
  • correct heart rate monitor data format

0.2.0

• core
  • gattc: DeviceCharacteristic Read() implementation
  • gap: add Disconnect() to Driver
  • gap: change signature for Addresser interface Set() function to accept string and then parse it as needed
• linux
  • update to latest version of go-bluetooth package for Linux
• macos
  • handle case when adapter enable sends notification before event delegate is set
  • Document async Disconnect behaviour
• examples
  • discover should only wait on startup on baremetal, since macOS does not like that