vivado -mode batch -source fpga_project.tcl
Utils call various ioctls to the video-sniffer driver.
The most important might be mode_tmds, as by default, the sniffer streams data decoded to RGB.
The default mode can be changed in the linux driver.
When the system is up, to check if everything worked, get_res util can be used. For RGB mode it should print the actual image resolution, for TMDS mode it should output 1970x3300.
The data can be acquired using dd utility, e.g.:
dd if=/dev/video0 of=dump count=1 bs=`echo 1970*3300*10 | bc`
The dump can be analyzed and decoded using tmds2rgb util.
This util does not support InfoFrames at the moment.