Fix shared wall-inlet corner node for compressible

Common/src/CConfig.cpp

@@ -5589,16 +5589,16 @@ void CConfig::SetPostprocessing(SU2_COMPONENT val_software, unsigned short val_i
   /*--- Define some variables for flamelet model. ---*/
   if (Kind_Species_Model == SPECIES_MODEL::FLAMELET) {
     /*--- The controlling variables are progress variable, total enthalpy, and optionally mixture fraction ---*/
-    //n_control_vars = nSpecies - n_user_scalars;
     if (n_control_vars != (nSpecies - n_user_scalars))
-      SU2_MPI::Error("Number of initial species incompatbile with number of controlling variables and user scalars.", CURRENT_FUNCTION);
+      SU2_MPI::Error("Number of initial species incompatible with number of controlling variables and user scalars.", CURRENT_FUNCTION);
     /*--- We can have additional user defined transported scalars ---*/
     n_scalars = n_control_vars + n_user_scalars;
   }
 
   if (Kind_Regime == ENUM_REGIME::COMPRESSIBLE && GetBounded_Scalar()) {
     SU2_MPI::Error("BOUNDED_SCALAR discretization can only be used for incompressible problems.", CURRENT_FUNCTION);
   }
+
 }
 
 void CConfig::SetMarkers(SU2_COMPONENT val_software) {

SU2_CFD/src/solvers/CEulerSolver.cpp

@@ -6879,10 +6879,11 @@ void CEulerSolver::BC_Inlet(CGeometry *geometry, CSolver **solver_container,
                             CConfig *config, unsigned short val_marker) {
   unsigned short iDim;
   unsigned long iVertex, iPoint;
-  su2double P_Total, T_Total, Velocity[MAXNDIM], Velocity2, H_Total, Temperature, Riemann,
+  su2double P_Total, T_Total, Velocity[MAXNDIM], Velocity2, H_Total, Riemann,
   Pressure, Density, Energy, Flow_Dir[MAXNDIM], Mach2, SoundSpeed2, SoundSpeed_Total2, Vel_Mag,
   alpha, aa, bb, cc, dd, Area, UnitNormal[MAXNDIM], Normal[MAXNDIM];
   su2double *V_inlet, *V_domain;
+  su2double Temperature;
 
   const bool implicit = (config->GetKind_TimeIntScheme() == EULER_IMPLICIT);
   const su2double Two_Gamma_M1 = 2.0 / Gamma_Minus_One;
@@ -6920,7 +6921,7 @@ void CEulerSolver::BC_Inlet(CGeometry *geometry, CSolver **solver_container,
 
       V_domain = nodes->GetPrimitive(iPoint);
 
-      /*--- Build the fictitious intlet state based on characteristics ---*/
+      /*--- Build the fictitious inlet state based on characteristics ---*/
 
 
       /*--- Subsonic inflow: there is one outgoing characteristic (u-c),
@@ -7095,8 +7096,8 @@ void CEulerSolver::BC_Inlet(CGeometry *geometry, CSolver **solver_container,
           if (tkeNeeded) Energy += GetTke_Inf();
 
           /*--- Primitive variables, using the derived quantities ---*/
-
-          V_inlet[0] = Pressure / ( Gas_Constant * Density);
+          Temperature = Pressure / ( Gas_Constant * Density);
+          V_inlet[0] = Temperature;
           for (iDim = 0; iDim < nDim; iDim++)
             V_inlet[iDim+1] = Vel_Mag*Flow_Dir[iDim];
           V_inlet[nDim+1] = Pressure;
@@ -7110,6 +7111,68 @@ void CEulerSolver::BC_Inlet(CGeometry *geometry, CSolver **solver_container,
           break;
       }
 
+      /*--- Check if the inlet node is shared with a viscous wall. ---*/
+
+      if (geometry->nodes->GetViscousBoundary(iPoint)) {
+
+        switch (Kind_Inlet) {
+
+          /*--- Total properties have been specified at the inlet. ---*/
+
+          case INLET_TYPE::TOTAL_CONDITIONS: {
+
+            /*--- Impose the wall velocity from the interior wall node. ---*/
+
+            Velocity2 = 0.0;
+            for (iDim = 0; iDim < nDim; iDim++) {
+              V_inlet[iDim+1] = nodes->GetVelocity(iPoint,iDim);
+              Velocity2 += V_inlet[iDim+1] * V_inlet[iDim+1];
+            }
+
+            /*--- Match the pressure, density and energy at the wall. ---*/
+
+            Pressure = nodes->GetPressure(iPoint);
+            Density = Pressure / (Gas_Constant * Temperature);
+            Energy = Pressure / (Density*Gamma_Minus_One) + 0.5 * Velocity2;
+
+            if (tkeNeeded) Energy += GetTke_Inf();
+
+            V_inlet[nDim+1] = Pressure;
+            V_inlet[nDim+2] = Density;
+            V_inlet[nDim+3] = Energy + Pressure / Density;
+            break;
+          }
+
+          case INLET_TYPE::MASS_FLOW: {
+
+            /*--- Impose the wall velocity from the interior wall node. ---*/
+
+            Velocity2 = 0.0;
+            for (iDim = 0; iDim < nDim; iDim++) {
+              V_inlet[iDim+1] = nodes->GetVelocity(iPoint,iDim);
+              Velocity2 += V_inlet[iDim+1] * V_inlet[iDim+1];
+            }
+
+            Pressure = nodes->GetPressure(iPoint);
+            Density = nodes->GetDensity(iPoint);
+            Temperature = Pressure / ( Gas_Constant * Density);
+            Energy = Pressure / (Density * Gamma_Minus_One)  + 0.5 * Velocity2;
+            if (tkeNeeded) Energy += GetTke_Inf();
+
+            V_inlet[0] = Temperature;
+            V_inlet[nDim+1] = Pressure;
+            V_inlet[nDim+2] = Density;
+            V_inlet[nDim+3] = Energy + Pressure / Density;
+
+            break;
+          }
+
+          default:
+            SU2_MPI::Error("Unsupported INLET_TYPE.", CURRENT_FUNCTION);
+            break;
+
+        }
+      }
       /*--- Set various quantities in the solver class ---*/
 
       conv_numerics->SetPrimitive(V_domain, V_inlet);

TestCases/hybrid_regression.py

@@ -139,8 +139,8 @@ def main():
     poiseuille_profile.cfg_dir   = "navierstokes/poiseuille"
     poiseuille_profile.cfg_file  = "profile_poiseuille.cfg"
     poiseuille_profile.test_iter = 10
-    poiseuille_profile.test_vals         = [-12.485957, -7.612048, -0.000000, 2.085796]
-    poiseuille_profile.test_vals_aarch64 = [-12.485957, -7.612048, -0.000000, 2.085796]
+    poiseuille_profile.test_vals         = [-12.485991, -7.613038, -0.000000, 2.085796]
+    poiseuille_profile.test_vals_aarch64 = [-12.494717, -7.711274, -0.000000, 2.085796]
     test_list.append(poiseuille_profile)
 
     # 2D Rotational Periodic

TestCases/parallel_regression.py

@@ -311,7 +311,7 @@ def main():
     flatplate_udobj.cfg_dir   = "user_defined_functions"
     flatplate_udobj.cfg_file  = "lam_flatplate.cfg"
     flatplate_udobj.test_iter = 20
-    flatplate_udobj.test_vals = [-6.664134, -1.190073, -0.954366, 0.000641, -0.000633, 0.000548, -0.001181, 596.940000, 300.020000, 296.920000, 22.201000, 0.525750, 37.278000, 2.347900]
+    flatplate_udobj.test_vals = [-6.663514, -1.189436, -0.954938, 0.000644, -0.000635, 0.000549, -0.001183, 596.930000, 300.010000, 296.920000, 22.187000, 0.527090, 37.284000, 2.354200]
     test_list.append(flatplate_udobj)
 
     # Laminar cylinder (steady)
@@ -344,8 +344,8 @@ def main():
     poiseuille_profile.cfg_dir   = "navierstokes/poiseuille"
     poiseuille_profile.cfg_file  = "profile_poiseuille.cfg"
     poiseuille_profile.test_iter = 10
-    poiseuille_profile.test_vals         = [-12.483967, -7.577331, -0.000000, 2.085796]
-    poiseuille_profile.test_vals_aarch64 = [-12.483967, -7.577331, -0.000000, 2.085796]
+    poiseuille_profile.test_vals         = [-12.483988, -7.577838, -0.000000, 2.085796]
+    poiseuille_profile.test_vals_aarch64 = [-12.492864, -7.671632, -0.000000, 2.085796]
     test_list.append(poiseuille_profile)
 
     ##########################
@@ -1023,7 +1023,7 @@ def main():
     flatplate_unsteady.cfg_dir   = "navierstokes/flatplate"
     flatplate_unsteady.cfg_file  = "lam_flatplate_unst.cfg"
     flatplate_unsteady.test_iter = 3
-    flatplate_unsteady.test_vals = [0.000008, -8.876477, -8.249920, -6.294138, -5.468911, -3.398657, 0.002075, -0.324341]
+    flatplate_unsteady.test_vals = [-8.876870, -8.250064, -6.293918, -5.469416, -3.398952, 0.002075, -0.324126]
     flatplate_unsteady.unsteady  = True
     test_list.append(flatplate_unsteady)
 

TestCases/parallel_regression_AD.py

@@ -524,7 +524,7 @@ def main():
     pywrapper_wavy_wall_steady.cfg_dir = "py_wrapper/wavy_wall"
     pywrapper_wavy_wall_steady.cfg_file = "run_steady.py"
     pywrapper_wavy_wall_steady.test_iter = 100
-    pywrapper_wavy_wall_steady.test_vals = [-1.360044, 2.580709, -2.892473]
+    pywrapper_wavy_wall_steady.test_vals = [-1.359409, 2.580816, -2.892697]
     pywrapper_wavy_wall_steady.command = TestCase.Command("mpirun -n 2", "python", "run_steady.py")
     pywrapper_wavy_wall_steady.timeout = 1600
     pywrapper_wavy_wall_steady.tol = 0.00001

TestCases/serial_regression.py

@@ -198,8 +198,8 @@ def main():
     poiseuille_profile.cfg_dir   = "navierstokes/poiseuille"
     poiseuille_profile.cfg_file  = "profile_poiseuille.cfg"
     poiseuille_profile.test_iter = 10
-    poiseuille_profile.test_vals         = [-12.485974, -7.612341, -0.000000, 2.085796]
-    poiseuille_profile.test_vals_aarch64 = [-12.485974, -7.612341, -0.000000, 2.085796]
+    poiseuille_profile.test_vals         = [-12.485982, -7.613005, -0.000000, 2.085796]
+    poiseuille_profile.test_vals_aarch64 = [-12.494684, -7.711379, -0.000000, 2.085796] #last 4 columns
     test_list.append(poiseuille_profile)
 
     ##########################
@@ -1614,7 +1614,7 @@ def main():
     pywrapper_custom_inlet.cfg_dir = "py_wrapper/custom_inlet"
     pywrapper_custom_inlet.cfg_file = "lam_flatplate.cfg"
     pywrapper_custom_inlet.test_iter = 20
-    pywrapper_custom_inlet.test_vals = [-4.120494, -1.540195, -3.566114, 1.342509, -0.748827, 0.161349, -0.013214, 0.516000, -0.529220]
+    pywrapper_custom_inlet.test_vals = [-4.120437, -1.540129, -3.563086, 1.342567, -0.748783, 0.161976, -0.012959, 0.516320, -0.529280]
     pywrapper_custom_inlet.command = TestCase.Command(exec = "python", param = "run.py")
     pywrapper_custom_inlet.timeout = 1600
     pywrapper_custom_inlet.tol = 0.0001