Here are some example snippets to help you get started creating a container.
docker-compose (recommended)
Compatible with docker-compose v2 schemas.
----
version: "2.1"
services:
jellyfin:
image: linuxserver/jellyfin
container_name: jellyfin
environment:
- PUID=1000
- PGID=1000
- TZ=Europe/London
- UMASK_SET=<022> #optional
volumes:
- /path/to/library:/config
- /path/to/tvseries:/data/tvshows
- /path/to/movies:/data/movies
- /opt/vc/lib:/opt/vc/lib #optional
ports:
- 8096:8096
- 8920:8920 #optional
- 7359:7359/udp #optional
- 1900:1900/udp #optional
devices:
- /dev/dri:/dev/dri #optional
- /dev/vcsm:/dev/vcsm #optional
- /dev/vchiq:/dev/vchiq #optional
- /dev/video10:/dev/video10 #optional
- /dev/video11:/dev/video11 #optional
- /dev/video12:/dev/video12 #optional
restart: unless-stoppeddocker run -d \
--name=jellyfin \
-e PUID=1000 \
-e PGID=1000 \
-e TZ=Europe/London \
-e UMASK_SET=<022> `#optional` \
-p 8096:8096 \
-p 8920:8920 `#optional` \
-p 7359:7359/udp `#optional` \
-p 1900:1900/udp `#optional` \
-v /path/to/library:/config \
-v /path/to/tvseries:/data/tvshows \
-v /path/to/movies:/data/movies \
-v /opt/vc/lib:/opt/vc/lib `#optional` \
--device /dev/dri:/dev/dri `#optional` \
--device /dev/vcsm:/dev/vcsm `#optional` \
--device /dev/vchiq:/dev/vchiq `#optional` \
--device /dev/video10:/dev/video10 `#optional` \
--device /dev/video11:/dev/video11 `#optional` \
--device /dev/video12:/dev/video12 `#optional` \
--restart unless-stopped \
linuxserver/jellyfin
Container images are configured using parameters passed at runtime (such as those above). These parameters are separated by a colon and indicate <external>:<internal> respectively. For example, -p 8080:80 would expose port 80 from inside the container to be accessible from the host's IP on port 8080 outside the container.
| Parameter | Function |
|---|---|
-p 8096 |
Http webUI. |
-p 8920 |
Optional - Https webUI (you need to set up your own certificate). |
-p 7359/udp |
Optional - Allows clients to discover Jellyfin on the local network. |
-p 1900/udp |
Optional - Service discovery used by DNLA and clients. |
-e PUID=1000 |
for UserID - see below for explanation |
-e PGID=1000 |
for GroupID - see below for explanation |
-e TZ=Europe/London |
Specify a timezone to use EG Europe/London |
-e UMASK_SET=<022> |
for umask setting of Emby, default if left unset is 022. |
-v /config |
Jellyfin data storage location. This can grow very large, 50gb+ is likely for a large collection. |
-v /data/tvshows |
Media goes here. Add as many as needed e.g. /data/movies, /data/tv, etc. |
-v /data/movies |
Media goes here. Add as many as needed e.g. /data/movies, /data/tv, etc. |
-v /opt/vc/lib |
Path for Raspberry Pi OpenMAX libs optional. |
--device /dev/dri |
Only needed if you want to use your Intel GPU for hardware accelerated video encoding (vaapi). |
--device /dev/vcsm |
Only needed if you want to use your Raspberry Pi MMAL video decoding (Enabled as OpenMax H264 decode in gui settings). |
--device /dev/vchiq |
Only needed if you want to use your Raspberry Pi OpenMax video encoding. |
--device /dev/video10 |
Only needed if you want to use your Raspberry Pi V4L2 video encoding. |
--device /dev/video11 |
Only needed if you want to use your Raspberry Pi V4L2 video encoding. |
--device /dev/video12 |
Only needed if you want to use your Raspberry Pi V4L2 video encoding. |
You can set any environment variable from a file by using a special prepend FILE__.
As an example:
-e FILE__PASSWORD=/run/secrets/mysecretpassword
Will set the environment variable PASSWORD based on the contents of the /run/secrets/mysecretpassword file.
For all of our images we provide the ability to override the default umask settings for services started within the containers using the optional -e UMASK=022 setting.
Keep in mind umask is not chmod it subtracts from permissions based on it's value it does not add. Please read up here before asking for support.
The official documentation for ports has additional ports that can provide auto discovery.
Service Discovery (1900/udp) - Since client auto-discover would break if this option were configurable, you cannot change this in the settings at this time. DLNA also uses this port and is required to be in the local subnet.
Client Discovery (7359/udp) - Allows clients to discover Jellyfin on the local network. A broadcast message to this port with "Who is Jellyfin Server?" will get a JSON response that includes the server address, ID, and name.
-p 7359:7359/udp \
-p 1900:1900/udp \
When using volumes (-v flags) permissions issues can arise between the host OS and the container, we avoid this issue by allowing you to specify the user PUID and group PGID.
Ensure any volume directories on the host are owned by the same user you specify and any permissions issues will vanish like magic.
In this instance PUID=1000 and PGID=1000, to find yours use id user as below:
$ id username
uid=1000(dockeruser) gid=1000(dockergroup) groups=1000(dockergroup)
Webui can be found at http://<your-ip>:8096
More information can be found in their official documentation here .
Hardware acceleration users for Intel Quicksync will need to mount their /dev/dri video device inside of the container by passing the following command when running or creating the container:
--device=/dev/dri:/dev/dri
We will automatically ensure the abc user inside of the container has the proper permissions to access this device.
Hardware acceleration users for Nvidia will need to install the container runtime provided by Nvidia on their host, instructions can be found here:
https://github.com/NVIDIA/nvidia-docker
We automatically add the necessary environment variable that will utilise all the features available on a GPU on the host. Once nvidia-docker is installed on your host you will need to re/create the docker container with the nvidia container runtime --runtime=nvidia and add an environment variable -e NVIDIA_VISIBLE_DEVICES=all (can also be set to a specific gpu's UUID, this can be discovered by running nvidia-smi --query-gpu=gpu_name,gpu_uuid --format=csv ). NVIDIA automatically mounts the GPU and drivers from your host into the jellyfin docker container.
Hardware acceleration users for Raspberry Pi MMAL/OpenMAX will need to mount their /dev/vcsm and /dev/vchiq video devices inside of the container and their system OpenMax libs by passing the following options when running or creating the container:
--device=/dev/vcsm:/dev/vcsm
--device=/dev/vchiq:/dev/vchiq
-v /opt/vc/lib:/opt/vc/lib
Hardware acceleration users for Raspberry Pi V4L2 will need to mount their /dev/video1X devices inside of the container by passing the following options when running or creating the container:
--device=/dev/video10:/dev/video10
--device=/dev/video11:/dev/video11
--device=/dev/video12:/dev/video12
We publish various Docker Mods to enable additional functionality within the containers. The list of Mods available for this image (if any) as well as universal mods that can be applied to any one of our images can be accessed via the dynamic badges above.
- Shell access whilst the container is running:
docker exec -it jellyfin /bin/bash - To monitor the logs of the container in realtime:
docker logs -f jellyfin - container version number
docker inspect -f '{{ index .Config.Labels "build_version" }}' jellyfin
- image version number
docker inspect -f '{{ index .Config.Labels "build_version" }}' linuxserver/jellyfin
Most of our images are static, versioned, and require an image update and container recreation to update the app inside. With some exceptions (ie. nextcloud, plex), we do not recommend or support updating apps inside the container. Please consult the Application Setup section above to see if it is recommended for the image.
Below are the instructions for updating containers:
- Update all images:
docker-compose pull- or update a single image:
docker-compose pull jellyfin
- or update a single image:
- Let compose update all containers as necessary:
docker-compose up -d- or update a single container:
docker-compose up -d jellyfin
- or update a single container:
- You can also remove the old dangling images:
docker image prune
- Update the image:
docker pull linuxserver/jellyfin - Stop the running container:
docker stop jellyfin - Delete the container:
docker rm jellyfin - Recreate a new container with the same docker run parameters as instructed above (if mapped correctly to a host folder, your
/configfolder and settings will be preserved) - You can also remove the old dangling images:
docker image prune
- Pull the latest image at its tag and replace it with the same env variables in one run:
docker run --rm \ -v /var/run/docker.sock:/var/run/docker.sock \ containrrr/watchtower \ --run-once jellyfin - You can also remove the old dangling images:
docker image prune
Note: We do not endorse the use of Watchtower as a solution to automated updates of existing Docker containers. In fact we generally discourage automated updates. However, this is a useful tool for one-time manual updates of containers where you have forgotten the original parameters. In the long term, we highly recommend using Docker Compose.
- We recommend Diun for update notifications. Other tools that automatically update containers unattended are not recommended or supported.
If you want to make local modifications to these images for development purposes or just to customize the logic:
git clone https://github.com/linuxserver/docker-jellyfin.git
cd docker-jellyfin
docker build \
--no-cache \
--pull \
-t linuxserver/jellyfin:latest .
The ARM variants can be built on x86_64 hardware using multiarch/qemu-user-static
docker run --rm --privileged multiarch/qemu-user-static:register --reset
Once registered you can define the dockerfile to use with -f Dockerfile.aarch64.
- 22.07.20: - Ingest releases from Jellyfin repo.
- 28.04.20: - Replace MMAL/OMX dependency device
/dev/vc-memwith/dev/vcsmas the former was not sufficient for raspbian. - 11.04.20: - Enable hw decode (mmal) on Raspberry Pi, update readme instructions, add donation info, create missing default transcodes folder.
- 11.03.20: - Add Pi V4L2 support, remove optional transcode mapping (location is selected in the gui, defaults to path under
/config). - 30.01.20: - Add nightly tag.
- 09.01.20: - Add Pi OpenMax support.
- 02.10.19: - Improve permission fixing for render & dvb devices.
- 31.07.19: - Add AMD drivers for vaapi support on x86.
- 13.06.19: - Add Intel drivers for vaapi support on x86.
- 07.06.19: - Initial release.