Is there a way to increase Memory overclock higher than +250?

[TheBestPessimist]

In afterburner, i have a stable overclock at +1550. In Ghelper on the other hand, max is +250.

I have tried to edit the config.json file, and set "gpu_memory_0": 1000, and "gpu_memory_2": 1000, (balanced and turbo), but it seems that setting is not applied, nor shown in the GUI.

[seerge]

Cause there is a check in the code that would prevent that :) i have deliberately limited ui to those offsets (same as AC does) , as otherwise average user from reddit will crank it up to max and come complaining that its crashing

[TheBestPessimist]

roger, so there is no way with Ghelper. thx for confirming. then i'll continue to use afterburner!

[TheBestPessimist]

sidenote: you have a superb response time. heck, i with my APIs would respond that fast <3

[seerge]

I have added 2 optional config params : max_gpu_core and max_gpu_memory that you can set. They will affect maximum slider / possible setting values (that default to +250)

GHelper.zip

[TheBestPessimist]

OH. lovely. thank you very much. I will test tomorrow and give feedback.

[ks76rice]

How do you edit these paramaters? Not sure where to find the config.json file that was mentioned.

[TheBestPessimist]

in appdata ghelper

[TheBestPessimist]

@seerge i can finally confirm it works as expected. Thanks!

[RahulVivekNair]

@seerge Are these params available in the master(v0.95.0.0)?, whenever I add max_gpu_memory or max_gpu_core to the config file and run the program, the file gets overwritten and these parameters disappear.

[seerge]

@RahulVivekNair then looks like you don't quit the app prior to editing / saving config.json. App reads config only on start.

Config params are live in 0.95 (and prior versions too)
https://github.com/seerge/g-helper/blob/main/app/Gpu/NVidia/NvidiaGpuControl.cs#L15

[RahulVivekNair]

Thanks,it worked after a reboot!

[TheBestPessimist]

@RahulVivekNair i can confirm they work in 0.95

[MrxSiN]

So now it confirms its not locked behind vbios. Because last time when i want to OC memory pass 250, i need to swap the vbios.
This is a nice features. Introduce a toggle to bypass the 250 limit.

[RahulVivekNair]

So now it confirms its not locked behind vbios. Because last time when i want to OC memory pass 250, i need to swap the vbios.
This is a nice features. Introduce a toggle to bypass the 250 limit.

It depends,my 95W 3060 would not oc beyond 300mhz on memory but flashing a 130W vbios did,no locks now.