I'm a hobbyist/amateur at best. So there may be things that aren't optimized. For example the routing on the PCB is a hot mess
and the spacers between the plate should be 3.4mm but there aren't any spacers that size. That being said I've had the files
in the gerbers/ directory manufactured at JLC with 1.6mm size and they work just fine with the code provided in the qmk/
directory. So if you decide to use this, then please be advised that I'm not providing any sort of liability and you should
exercise some caution.
| Quantity | Item | Comment |
|---|---|---|
| 2 | Waveshare RP2040-Zero | |
| 2 | IC-Sockets for MCU | Optional but recommended |
| 2 | TRRS Sockets | |
| 44 | 1N4148 SOD123 diodes | |
| 30 | MX Hotswap Sockets | |
| 6 | Choc Hotswap Sockets | |
| 2 | EC11 Encoders | |
| 6 | Omrom 6mm Tact switches | B3F-1002 |
| 30 | MX Switches + Keycaps | |
| 6 | Choc Switches + Keycaps | |
| 12 | M2 Screws, Nuts, Bolts and Spacers |
I'm always happy to hear your opinions about this and if you decide to build this board then please do send me a picture of it.