Esp32 WT32-ETH01

[moshiko2312]

Hi how its possible to working with ESP32 WT32-ETH01
Its esp with LAN Cable.
I don't want working on WiFi
Thanks for all your job its the best way i see🙏

Just found this amazing item on AliExpress. Check it out! ₪37.61 67％ Off | WT32-ETH01 Embedded Serial Port Networking Ethernet Bluetooth-compatible WIFI Combo Gateway MCU ESP32 Wireless Module Board
https://a.aliexpress.com/_EvBJprt

[011V32]

Hi how its possible to working with ESP32 WT32-ETH01

Its esp with LAN Cable.

I don't want working on WiFi

Thanks for all your job its the best way i see🙏

Just found this amazing item on AliExpress. Check it out! ₪37.61 67％ Off | WT32-ETH01 Embedded Serial Port Networking Ethernet Bluetooth-compatible WIFI Combo Gateway MCU ESP32 Wireless Module Board

https://a.aliexpress.com/_EvBJprt

At the momement no LAN Support. But will come hopefully in near future. See other posts.

[moshiko2312]

Ok thanks Its working perfectly בתאריך יום ו׳, 31 במאי 2024 ב-14:56 מאת 011V32 ***@***.***>:

…

Hi how its possible to working with ESP32 WT32-ETH01 Its esp with LAN Cable. I don't want working on WiFi Thanks for all your job its the best way i see🙏 Just found this amazing item on AliExpress. Check it out! ₪37.61 67％ Off | WT32-ETH01 Embedded Serial Port Networking Ethernet Bluetooth-compatible WIFI Combo Gateway MCU ESP32 Wireless Module Board https://a.aliexpress.com/_EvBJprt At the momement no LAN Support. But will come hopefully in near future. See other posts. — Reply to this email directly, view it on GitHub <#60 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALPOXPO7HTHHRA4LKJTFHPLZFBQPDAVCNFSM6AAAAABISVO4JGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNBRHA4TINJRGA> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[moshiko2312]

I buy this one

https://shop.everythingsmart.io/products/est-poe-32-esp32-poe-development-board

[magic2910]

Is the board from aliexpress working?

[ChrisKoh83]

@moshiko2312
To get this working I guess you had to build your own code to make it work?

because the GPIOs used by the Ethernet module!?

[DP365]

yep, correct. you need to use the second hardware SPI bus (called HSPI) because the first one (VSPI) is used by the ethernet module. See also my post here #48 (comment)

[klim123123]

Its just works for me. Nothing special, i used random GPIOs.

spi:
  clk_pin: GPIO14
  miso_pin: GPIO4
  mosi_pin: GPIO2

pn532_spi:
  id: nfc_spi_module
  cs_pin: 12
  update_interval: 100ms

[drstil]

Its just works for me. Nothing special, i used random GPIOs.

spi:
  clk_pin: GPIO14
  miso_pin: GPIO4
  mosi_pin: GPIO2

pn532_spi:
  id: nfc_spi_module
  cs_pin: 12
  update_interval: 100ms

@klim123123 Thank you for this reply! How did you set those settings? config.h? How did you compile afterwards? Thank you very much!

[klim123123]

@klim123123 Thank you for this reply! How did you set those settings? config.h? How did you compile afterwards? Thank you very much!

Sorry, i'm confused with other project of rednblkx.
I'm using rednblkx/HAP-ESPHome
Same functionality but for ESPHome. It's just works.

[011V32]

Looks like things are going in the right direction now.
HomeSpan/HomeSpan#738 (comment)