Merge tag 'v4.4.248' of https://git.kernel.org/pub/scm/linux/kernel/g…

…it/stable/linux-stable into kernel-hmp

This is the 4.4.248 stable release

Signed-off-by: Shashank Baghel <theradcolor@gmail.com>

Documentation/devicetree/bindings/net/nfc/nxp-nci.txt

@@ -27,7 +27,7 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2):
 		clock-frequency = <100000>;
 
 		interrupt-parent = <&gpio1>;
-		interrupts = <29 GPIO_ACTIVE_HIGH>;
+		interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
 
 		enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 		firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;

Documentation/devicetree/bindings/net/nfc/pn544.txt

@@ -27,7 +27,7 @@ Example (for ARM-based BeagleBone with PN544 on I2C2):
 		clock-frequency = <400000>;
 
 		interrupt-parent = <&gpio1>;
-		interrupts = <17 GPIO_ACTIVE_HIGH>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
 
 		enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;

Makefile

@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 4
-SUBLEVEL = 247
+SUBLEVEL = 248
 EXTRAVERSION =
 NAME = Blurry Fish Butt
 

arch/arm64/include/asm/assembler.h

@@ -189,22 +189,25 @@ lr	.req	x30		// link register
 
 /*
  * Pseudo-ops for PC-relative adr/ldr/str <reg>, <symbol> where
- * <symbol> is within the range +/- 4 GB of the PC.
+ * <symbol> is within the range +/- 4 GB of the PC when running
+ * in core kernel context. In module context, a movz/movk sequence
+ * is used, since modules may be loaded far away from the kernel
+ * when KASLR is in effect.
  */
 	/*
 	 * @dst: destination register (64 bit wide)
 	 * @sym: name of the symbol
-	 * @tmp: optional scratch register to be used if <dst> == sp, which
-	 *       is not allowed in an adrp instruction
 	 */
-	.macro	adr_l, dst, sym, tmp=
-	.ifb	\tmp
+	.macro	adr_l, dst, sym
+#ifndef MODULE
 	adrp	\dst, \sym
 	add	\dst, \dst, :lo12:\sym
-	.else
-	adrp	\tmp, \sym
-	add	\dst, \tmp, :lo12:\sym
-	.endif
+#else
+	movz	\dst, #:abs_g3:\sym
+	movk	\dst, #:abs_g2_nc:\sym
+	movk	\dst, #:abs_g1_nc:\sym
+	movk	\dst, #:abs_g0_nc:\sym
+#endif
 	.endm
 
 	/*
@@ -215,13 +218,23 @@ lr	.req	x30		// link register
 	 *       the address
 	 */
 	.macro	ldr_l, dst, sym, tmp=
+#ifndef MODULE
 	.ifb	\tmp
 	adrp	\dst, \sym
 	ldr	\dst, [\dst, :lo12:\sym]
 	.else
 	adrp	\tmp, \sym
 	ldr	\dst, [\tmp, :lo12:\sym]
 	.endif
+#else
+	.ifb	\tmp
+	adr_l	\dst, \sym
+	ldr	\dst, [\dst]
+	.else
+	adr_l	\tmp, \sym
+	ldr	\dst, [\tmp]
+	.endif
+#endif
 	.endm
 
 	/*
@@ -231,8 +244,13 @@ lr	.req	x30		// link register
 	 *       while <src> needs to be preserved.
 	 */
 	.macro	str_l, src, sym, tmp
+#ifndef MODULE
 	adrp	\tmp, \sym
 	str	\src, [\tmp, :lo12:\sym]
+#else
+	adr_l	\tmp, \sym
+	str	\src, [\tmp]
+#endif
 	.endm
 
 	/*

arch/powerpc/lib/ppc_ksyms.c

@@ -24,7 +24,6 @@ EXPORT_SYMBOL(csum_tcpudp_magic);
 #endif
 
 EXPORT_SYMBOL(__copy_tofrom_user);
-EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(copy_page);
 
 #ifdef CONFIG_PPC64

arch/x86/include/asm/insn.h

@@ -198,6 +198,21 @@ static inline int insn_offset_immediate(struct insn *insn)
 	return insn_offset_displacement(insn) + insn->displacement.nbytes;
 }
 
+/**
+ * for_each_insn_prefix() -- Iterate prefixes in the instruction
+ * @insn: Pointer to struct insn.
+ * @idx:  Index storage.
+ * @prefix: Prefix byte.
+ *
+ * Iterate prefix bytes of given @insn. Each prefix byte is stored in @prefix
+ * and the index is stored in @idx (note that this @idx is just for a cursor,
+ * do not change it.)
+ * Since prefixes.nbytes can be bigger than 4 if some prefixes
+ * are repeated, it cannot be used for looping over the prefixes.
+ */
+#define for_each_insn_prefix(insn, idx, prefix)	\
+	for (idx = 0; idx < ARRAY_SIZE(insn->prefixes.bytes) && (prefix = insn->prefixes.bytes[idx]) != 0; idx++)
+
 #define POP_SS_OPCODE 0x1f
 #define MOV_SREG_OPCODE 0x8e
 

arch/x86/kernel/uprobes.c

@@ -268,10 +268,11 @@ static volatile u32 good_2byte_insns[256 / 32] = {
 
 static bool is_prefix_bad(struct insn *insn)
 {
+	insn_byte_t p;
 	int i;
 
-	for (i = 0; i < insn->prefixes.nbytes; i++) {
-		switch (insn->prefixes.bytes[i]) {
+	for_each_insn_prefix(insn, i, p) {
+		switch (p) {
 		case 0x26:	/* INAT_PFX_ES   */
 		case 0x2E:	/* INAT_PFX_CS   */
 		case 0x36:	/* INAT_PFX_DS   */
@@ -711,6 +712,7 @@ static struct uprobe_xol_ops branch_xol_ops = {
 static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
 {
 	u8 opc1 = OPCODE1(insn);
+	insn_byte_t p;
 	int i;
 
 	switch (opc1) {
@@ -741,8 +743,8 @@ static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
 	 * Intel and AMD behavior differ in 64-bit mode: Intel ignores 66 prefix.
 	 * No one uses these insns, reject any branch insns with such prefix.
 	 */
-	for (i = 0; i < insn->prefixes.nbytes; i++) {
-		if (insn->prefixes.bytes[i] == 0x66)
+	for_each_insn_prefix(insn, i, p) {
+		if (p == 0x66)
 			return -ENOTSUPP;
 	}
 

drivers/i2c/busses/i2c-imx.c

@@ -420,6 +420,19 @@ static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx)
 /** Functions for IMX I2C adapter driver ***************************************
 *******************************************************************************/
 
+static void i2c_imx_clear_irq(struct imx_i2c_struct *i2c_imx, unsigned int bits)
+{
+	unsigned int temp;
+
+	/*
+	 * i2sr_clr_opcode is the value to clear all interrupts. Here we want to
+	 * clear only <bits>, so we write ~i2sr_clr_opcode with just <bits>
+	 * toggled. This is required because i.MX needs W0C and Vybrid uses W1C.
+	 */
+	temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ bits;
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+}
+
 static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
 {
 	unsigned long orig_jiffies = jiffies;
@@ -432,8 +445,7 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
 
 		/* check for arbitration lost */
 		if (temp & I2SR_IAL) {
-			temp &= ~I2SR_IAL;
-			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+			i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
 			return -EAGAIN;
 		}
 
@@ -460,6 +472,16 @@ static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx)
 		dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
 		return -ETIMEDOUT;
 	}
+
+	/* check for arbitration lost */
+	if (i2c_imx->i2csr & I2SR_IAL) {
+		dev_dbg(&i2c_imx->adapter.dev, "<%s> Arbitration lost\n", __func__);
+		i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
+
+		i2c_imx->i2csr = 0;
+		return -EAGAIN;
+	}
+
 	dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__);
 	i2c_imx->i2csr = 0;
 	return 0;
@@ -595,9 +617,7 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
 	if (temp & I2SR_IIF) {
 		/* save status register */
 		i2c_imx->i2csr = temp;
-		temp &= ~I2SR_IIF;
-		temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
-		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+		i2c_imx_clear_irq(i2c_imx, I2SR_IIF);
 		wake_up(&i2c_imx->queue);
 		return IRQ_HANDLED;
 	}

drivers/input/joystick/xpad.c

@@ -258,6 +258,7 @@ static const struct xpad_device {
 	{ 0x1038, 0x1430, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
 	{ 0x1038, 0x1431, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
 	{ 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
+	{ 0x1209, 0x2882, "Ardwiino Controller", 0, XTYPE_XBOX360 },
 	{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 },
 	{ 0x12ab, 0x0303, "Mortal Kombat Klassic FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
@@ -435,6 +436,7 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOXONE_VENDOR(0x0f0d),		/* Hori Controllers */
 	XPAD_XBOX360_VENDOR(0x1038),		/* SteelSeries Controllers */
 	XPAD_XBOX360_VENDOR(0x11c9),		/* Nacon GC100XF */
+	XPAD_XBOX360_VENDOR(0x1209),		/* Ardwiino Controllers */
 	XPAD_XBOX360_VENDOR(0x12ab),		/* X-Box 360 dance pads */
 	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x146b),		/* BigBen Interactive Controllers */

drivers/input/serio/i8042-x86ia64io.h

@@ -223,6 +223,10 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = {
 			DMI_MATCH(DMI_SYS_VENDOR, "PEGATRON CORPORATION"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "C15B"),
 		},
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ByteSpeed LLC"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ByteSpeed Laptop C15B"),
+		},
 	},
 	{ }
 };

drivers/input/serio/i8042.c

@@ -1456,7 +1456,8 @@ static int __init i8042_setup_aux(void)
 	if (error)
 		goto err_free_ports;
 
-	if (aux_enable())
+	error = aux_enable();
+	if (error)
 		goto err_free_irq;
 
 	i8042_aux_irq_registered = true;

drivers/iommu/amd_iommu.c

@@ -3625,7 +3625,7 @@ static struct irq_chip amd_ir_chip;
 
 #define DTE_IRQ_PHYS_ADDR_MASK	(((1ULL << 45)-1) << 6)
 #define DTE_IRQ_REMAP_INTCTL    (2ULL << 60)
-#define DTE_IRQ_TABLE_LEN       (8ULL << 1)
+#define DTE_IRQ_TABLE_LEN       (9ULL << 1)
 #define DTE_IRQ_REMAP_ENABLE    1ULL
 
 static void set_dte_irq_entry(u16 devid, struct irq_remap_table *table)

drivers/net/bonding/bond_main.c

@@ -1225,19 +1225,57 @@ static void bond_upper_dev_unlink(struct net_device *bond_dev,
 	rtmsg_ifinfo(RTM_NEWLINK, slave_dev, IFF_SLAVE, GFP_KERNEL);
 }
 
-static struct slave *bond_alloc_slave(struct bonding *bond)
+static void slave_kobj_release(struct kobject *kobj)
+{
+	struct slave *slave = to_slave(kobj);
+	struct bonding *bond = bond_get_bond_by_slave(slave);
+
+	cancel_delayed_work_sync(&slave->notify_work);
+	if (BOND_MODE(bond) == BOND_MODE_8023AD)
+		kfree(SLAVE_AD_INFO(slave));
+
+	kfree(slave);
+}
+
+static struct kobj_type slave_ktype = {
+	.release = slave_kobj_release,
+#ifdef CONFIG_SYSFS
+	.sysfs_ops = &slave_sysfs_ops,
+#endif
+};
+
+static int bond_kobj_init(struct slave *slave)
+{
+	int err;
+
+	err = kobject_init_and_add(&slave->kobj, &slave_ktype,
+				   &(slave->dev->dev.kobj), "bonding_slave");
+	if (err)
+		kobject_put(&slave->kobj);
+
+	return err;
+}
+
+static struct slave *bond_alloc_slave(struct bonding *bond,
+				      struct net_device *slave_dev)
 {
 	struct slave *slave = NULL;
 
 	slave = kzalloc(sizeof(struct slave), GFP_KERNEL);
 	if (!slave)
 		return NULL;
 
+	slave->bond = bond;
+	slave->dev = slave_dev;
+
+	if (bond_kobj_init(slave))
+		return NULL;
+
 	if (BOND_MODE(bond) == BOND_MODE_8023AD) {
 		SLAVE_AD_INFO(slave) = kzalloc(sizeof(struct ad_slave_info),
 					       GFP_KERNEL);
 		if (!SLAVE_AD_INFO(slave)) {
-			kfree(slave);
+			kobject_put(&slave->kobj);
 			return NULL;
 		}
 	}
@@ -1246,17 +1284,6 @@ static struct slave *bond_alloc_slave(struct bonding *bond)
 	return slave;
 }
 
-static void bond_free_slave(struct slave *slave)
-{
-	struct bonding *bond = bond_get_bond_by_slave(slave);
-
-	cancel_delayed_work_sync(&slave->notify_work);
-	if (BOND_MODE(bond) == BOND_MODE_8023AD)
-		kfree(SLAVE_AD_INFO(slave));
-
-	kfree(slave);
-}
-
 static void bond_fill_ifbond(struct bonding *bond, struct ifbond *info)
 {
 	info->bond_mode = BOND_MODE(bond);
@@ -1420,14 +1447,12 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	    bond->dev->addr_assign_type == NET_ADDR_RANDOM)
 		bond_set_dev_addr(bond->dev, slave_dev);
 
-	new_slave = bond_alloc_slave(bond);
+	new_slave = bond_alloc_slave(bond, slave_dev);
 	if (!new_slave) {
 		res = -ENOMEM;
 		goto err_undo_flags;
 	}
 
-	new_slave->bond = bond;
-	new_slave->dev = slave_dev;
 	/* Set the new_slave's queue_id to be zero.  Queue ID mapping
 	 * is set via sysfs or module option if desired.
 	 */
@@ -1741,7 +1766,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	dev_set_mtu(slave_dev, new_slave->original_mtu);
 
 err_free:
-	bond_free_slave(new_slave);
+	kobject_put(&new_slave->kobj);
 
 err_undo_flags:
 	/* Enslave of first slave has failed and we need to fix master's mac */
@@ -1920,7 +1945,7 @@ static int __bond_release_one(struct net_device *bond_dev,
 	if (!netif_is_bond_master(slave_dev))
 		slave_dev->priv_flags &= ~IFF_BONDING;
 
-	bond_free_slave(slave);
+	kobject_put(&slave->kobj);
 
 	return 0;
 }