-
-
Notifications
You must be signed in to change notification settings - Fork 0
How to Setup Wallpaper
Bartholomew Ho edited this page May 27, 2024
·
5 revisions
If you haven't install OpenRGB, click here to download.
- Run OpenRGB, go to Settings tab, Click E1.31 Devices.
- Click Add button at bottom, Enter:
Name | Wallpaper1 | IP (Unicast) | 127.0.0.254 |
Start Universe | 1 | Start Channel | 1 |
Number of LEDs | 2304 | Type | Matrix |
Matrix Width | 64 | Matrix Height | 36 |
Matrix Order | Horizon Top Left | RGB Order | RGB |
Universe Size | 510 | Keepalive Time | 1000 |
- Save Settings, Click Rescan Devices or Restart OpenRGB.
- On OpenRGB, go to SDK Server, click Start Server.
- OpenRGB Wallpaper should now automatically connects to OpenRGB.
Note:
- The Device name on Wallpaper Engine properties must Identical with the name on E1.31.
- You are allow to change the Matrix Size, but make sure your LED count is matching the size, IE:
Width Height LEDs
16 x 9 = 144
32 x 18 = 576
64 x 36 = 2304
256 x 144 = 36864
- The higher the LED count, the higher the CPU usage used.