Project Lighthouse Yocto Images

Repository contains various Yocto images for the Project Lighthouse.

Latest release: v0.0.7

Instructions

To save space, network bandwidth and accommodate all possible SD Card sizes main partition is only 1GB by default. During the first boot partition will be expanded automatically.

Example:

1. Download and unpack image-va.b.c.zip;
2. Write image to your SD Card as described here;
3. [OPTIONAL] If you'd like to configure bootstrap sequence or change Lighthouse parameters then mount SD Card boot partition on your laptop and edit lighthouse/boot.cfg or lighthouse/bootstrap.sh script;
4. Insert SD card to the RPi2, make sure that it's connected to the LAN with Internet access and turn it on;
5. First boot can take up to 4 minutes, depending on your SD Card size, performance and quality of internet connection;
6. Enjoy!

Once your RPi is ready you can also do the following:

• Establish SSH session:
  • $ ssh root@lighthouse.local
• Enable Samba (once your established SSH session):
  • $ smbpasswd -a root
  • Choose password you want to use for your Samba share
  • Access/mount shared drive using root user and password you set at the previous step
• Enter into Service Mode
  • Boot device with button pressed until you hear "Release the button" hint;
  • Here you can change speaker/mic volume and reboot device to apply changes. Please follow audio hints.