diff --git a/content/documentation/Clusterboard/Further_information/Specifications.adoc b/content/documentation/Clusterboard/Further_information/Specifications.md similarity index 60% rename from content/documentation/Clusterboard/Further_information/Specifications.adoc rename to content/documentation/Clusterboard/Further_information/Specifications.md index 4d0c8788..aca0cf68 100644 --- a/content/documentation/Clusterboard/Further_information/Specifications.adoc +++ b/content/documentation/Clusterboard/Further_information/Specifications.md @@ -12,8 +12,8 @@ menu: These are the Clusterboard specifications: * Standard mITX form-factor (167 mm x 170 mm) -* Built-in eight-port Gigabit Ethernet switch, using RTL8370N ASIC; the switch is unmanaged although the ASIC provides management functions, see https://forum.pine64.org/showthread.php?tid=13181[this forum thread] for further information -* Seven internal Gigabit Ethernet ports, one for each SOPINE module, connected to the built-in switch using https://datasheet.lcsc.com/szlcsc/Realtek-Semicon-RTL8211EG-VB-CG_C69264.pdf[RTL8211E] PHYs +* Built-in eight-port Gigabit Ethernet switch, using RTL8370N ASIC; the switch is unmanaged although the ASIC provides management functions, see [this forum thread](https://forum.pine64.org/showthread.php?tid=13181) for further information +* Seven internal Gigabit Ethernet ports, one for each SOPINE module, connected to the built-in switch using [RTL8211E](https://datasheet.lcsc.com/szlcsc/Realtek-Semicon-RTL8211EG-VB-CG_C69264.pdf) PHYs * One connector for an eMMC module, for the first SOPINE module * Seven USB 2.0 ports, one for each SOPINE module * GPIO pins exposed for each SOPINE module, including the UARTs @@ -24,5 +24,5 @@ These are the Clusterboard specifications: Please note than only one power input may be used at once. The barrel-style jack is additionally protected by a built-in 15 A polyfuse. -NOTE: No batteries for RTC backup should be installed unless certain hardware modifications are applied to the Clusterboard. Internal circuitry of the Clusterboard and SOPINE modules will eventually attempt to charge the batteries, which will result in damage to the batteries and the Clusterboard. Keep in mind that rechargeable batteries cannot be used because there is no charging circuitry for them on the Clusterboard. Please see https://forum.pine64.org/showthread.php?tid=5849&page=2[this forum thread] and https://ericdraken.com/a64-reset-problem/[this article] for further information. - +**📌 NOTE**\ +No batteries for RTC backup should be installed unless certain hardware modifications are applied to the Clusterboard. Internal circuitry of the Clusterboard and SOPINE modules will eventually attempt to charge the batteries, which will result in damage to the batteries and the Clusterboard. Keep in mind that rechargeable batteries cannot be used because there is no charging circuitry for them on the Clusterboard. Please see [this forum thread](https://forum.pine64.org/showthread.php?tid=5849&page=2) and [this article](https://ericdraken.com/a64-reset-problem/) for further information. diff --git a/content/documentation/Clusterboard/Schematics.adoc b/content/documentation/Clusterboard/Schematics.adoc deleted file mode 100644 index 0b933bf9..00000000 --- a/content/documentation/Clusterboard/Schematics.adoc +++ /dev/null @@ -1,20 +0,0 @@ ---- -title: "Schematics" -draft: false -menu: - docs: - title: - parent: "Clusterboard" - identifier: "Clusterboard/Schematics" - weight: ---- - -* https://files.pine64.org/doc/clusterboard/PINE64%20CLUSTER%20BOARD_2_2.DSN[Clusterboard version 2.2 Schematic Capture source file] -* https://files.pine64.org/doc/clusterboard/PINE64%20CLUSTER%20BOARD_2_2_Schematic.pdf[Clusterboard version 2.2 Schematic Capture PDF file] -* https://files.pine64.org/doc/clusterboard/PINE64%20CLUSTER%20BOARD_2_2.brd[Clusterboard version 2.2 PCB Job source file] -* https://files.pine64.org/doc/clusterboard/PINE64%20CLUSTER%20BOARD%20V2.2-gerber.rar[Clusterboard version 2.2 PCB Gerber file] -* https://files.pine64.org/doc/clusterboard/PINE64%20CLUSTER%20BOARD_2_2_PCB.pdf[Clusterboard version 2.2 PCB Layout PDF file] -* https://files.pine64.org/doc/clusterboard/clusterboard_20pins_header.jpg[Clusterboard 20pins header definition] -* https://myhub.autodesk360.com/ue2b2f72e/g/shares/SH56a43QTfd62c1cd96840f4ec37c60bcf12[Clusterboard 3D drawing in Fusion360] -* https://myhub.autodesk360.com/ue2b2f72e/g/shares/SH56a43QTfd62c1cd968cd6bc203ac753401?viewState=NoIgbgDAdAjCA0ICGBmARgEwGZIOwGMBaDFADgFNCAWfAJi2o1IFZDmlTSIA2DW8-FTQgAukA[Clusterboard PDF drawing] - diff --git a/content/documentation/Clusterboard/Schematics.md b/content/documentation/Clusterboard/Schematics.md new file mode 100644 index 00000000..7e7d9bfa --- /dev/null +++ b/content/documentation/Clusterboard/Schematics.md @@ -0,0 +1,19 @@ +--- +title: "Schematics" +draft: false +menu: + docs: + title: + parent: "Clusterboard" + identifier: "Clusterboard/Schematics" + weight: +--- + +* [Clusterboard version 2.2 Schematic Capture source file](https://files.pine64.org/doc/clusterboard/PINE64%20CLUSTER%20BOARD_2_2.DSN) +* [Clusterboard version 2.2 Schematic Capture PDF file](https://files.pine64.org/doc/clusterboard/PINE64%20CLUSTER%20BOARD_2_2_Schematic.pdf) +* [Clusterboard version 2.2 PCB Job source file](https://files.pine64.org/doc/clusterboard/PINE64%20CLUSTER%20BOARD_2_2.brd) +* [Clusterboard version 2.2 PCB Gerber file](https://files.pine64.org/doc/clusterboard/PINE64%20CLUSTER%20BOARD%20V2.2-gerber.rar) +* [Clusterboard version 2.2 PCB Layout PDF file](https://files.pine64.org/doc/clusterboard/PINE64%20CLUSTER%20BOARD_2_2_PCB.pdf) +* [Clusterboard 20pins header definition](https://files.pine64.org/doc/clusterboard/clusterboard_20pins_header.jpg) +* [Clusterboard 3D drawing in Fusion360](https://myhub.autodesk360.com/ue2b2f72e/g/shares/SH56a43QTfd62c1cd96840f4ec37c60bcf12) +* [Clusterboard PDF drawing](https://myhub.autodesk360.com/ue2b2f72e/g/shares/SH56a43QTfd62c1cd968cd6bc203ac753401?viewState=NoIgbgDAdAjCA0ICGBmARgEwGZIOwGMBaDFADgFNCAWfAJi2o1IFZDmlTSIA2DW8-FTQgAukA) diff --git a/content/documentation/Ox64/Development_Efforts.adoc b/content/documentation/Ox64/Development_Efforts.adoc deleted file mode 100644 index ffdf2a1e..00000000 --- a/content/documentation/Ox64/Development_Efforts.adoc +++ /dev/null @@ -1,15 +0,0 @@ ---- -title: "Development Efforts" -draft: false -menu: - docs: - title: - parent: "Ox64" - identifier: "Ox64/Development_Efforts" - weight: 3 ---- - -* https://twitter.com/gamelaster/status/1583916501400068096[Ox64 boots Linux successfully] -* https://twitter.com/btashton/status/1586381334439923713?t=w5xRRUR74HGK2O1Zg_aFyw&s=19[Brennan Ashton is porting Apache NuttX RTOS and OpenAMP (Asymmetric Multiprocessing) to BL808] -* https://twitter.com/thanos_engine/status/1585153938092761093[Phone Concept for BL808] - diff --git a/content/documentation/Ox64/Development_Efforts.md b/content/documentation/Ox64/Development_Efforts.md new file mode 100644 index 00000000..58144fca --- /dev/null +++ b/content/documentation/Ox64/Development_Efforts.md @@ -0,0 +1,14 @@ +--- +title: "Development Efforts" +draft: false +menu: + docs: + title: + parent: "Ox64" + identifier: "Ox64/Development_Efforts" + weight: 3 +--- + +* [Ox64 boots Linux successfully](https://twitter.com/gamelaster/status/1583916501400068096) +* [Brennan Ashton is porting Apache NuttX RTOS and OpenAMP (Asymmetric Multiprocessing) to BL808](https://twitter.com/btashton/status/1586381334439923713?t=w5xRRUR74HGK2O1Zg_aFyw&s=19) +* [Phone Concept for BL808](https://twitter.com/thanos_engine/status/1585153938092761093) diff --git a/content/documentation/Ox64/Features.adoc b/content/documentation/Ox64/Features.md similarity index 92% rename from content/documentation/Ox64/Features.adoc rename to content/documentation/Ox64/Features.md index 4c450b33..248ad2a9 100644 --- a/content/documentation/Ox64/Features.adoc +++ b/content/documentation/Ox64/Features.md @@ -9,26 +9,25 @@ menu: weight: 1 --- -== Network +## Network * 2.4 GHz 1T1R WiFi 802.11 b/g/n * Bluetooth 5.2 * Zigbee * 10/100 Mbit/s Ethernet (optional, on expansion board) -== Storage +## Storage * On-board 16 Mbit (2 MB) or 128 Mbit (16 MB) XSPI NOR flash memory * MicroSD - supports SDHC and SDXC (only on the 128 Mb version) -== Expansion Ports +## Expansion Ports * USB 2.0 OTG port * 26 GPIO pins, including SPI, I~2~C and UART functionality, possible I~2~S and GMII expansion * Dual-lane MiPi CSI port, located at USB-C port, for camera module -== Audio +## Audio * Microphone (optional, on the camera module) * Speaker (optional, on the camera module) - diff --git a/content/documentation/Ox64/Further_information/Compatible_UARTs.adoc b/content/documentation/Ox64/Further_information/Compatible_UARTs.md similarity index 65% rename from content/documentation/Ox64/Further_information/Compatible_UARTs.adoc rename to content/documentation/Ox64/Further_information/Compatible_UARTs.md index 50e9cb1c..f4214102 100644 --- a/content/documentation/Ox64/Further_information/Compatible_UARTs.adoc +++ b/content/documentation/Ox64/Further_information/Compatible_UARTs.md @@ -13,12 +13,12 @@ When the Ox64 is in bootloader mode, some UARTs are unable to communicate with i The below devices have been tested and verified as working: -* Raspberry Pi Pico - running the following https://github.com/sanjay900/ox64-uart/releases/tag/v1.1[UART firmware] (GP4 and GP5 are used for port 0, GP12 and GP13 for port 1) -* Compiled binary for Pi Pico and connectivity diagram is https://github.com/Kris-Sekula/Pine64_Ox64_SBC/tree/main/uart[here] -* ESP32 with CP210x - bridge the EN pin to ground to disable the ESP32 itself, and then connect the TX on the esp32 to 14 on the Ox64 and RX to pin 15. Note that only baud rate 115200 works, and this doesn't seem to work for everyone) +* Raspberry Pi Pico - running the following [UART firmware](https://github.com/sanjay900/ox64-uart/releases/tag/v1.1) (GP4 and GP5 are used for port 0, GP12 and GP13 for port 1) +* Compiled binary for Pi Pico and connectivity diagram is [here](https://github.com/Kris-Sekula/Pine64_Ox64_SBC/tree/main/uart) +* ESP32 with CP210x - bridge the EN pin to ground to disable the ESP32 itself, and then connect the TX on the esp32 to 14 on the Ox64 and RX to pin 15. Note that only baud rate 115200 works, and this doesn’t seem to work for everyone) * Stand-alone CP2102 dongle works at 115200 baud. Brand used was HiLetgo. * STM32F401 BlackPill - running the Black Magic Debug firmware * STM32F103C8T6 BluePill - running Black Magic Debug. -* STM32F103C8T6 BluePill - running link:/documentation/Ox64/Software/Flashing/#optional_preparing_serial_uart_adapter_stm32f103c8t6[BluePill Serial Monster] +* STM32F103C8T6 BluePill - running [BluePill Serial Monster](/documentation/Ox64/Software/Flashing/#optional_preparing_serial_uart_adapter_stm32f103c8t6) * Some UART adapters based on the FT232H (note that the FT232RL does not work, and neither does the Pine 64 JTAG) -* Some CH340G based adapters work and some don't. \ No newline at end of file +* Some CH340G based adapters work and some don’t. diff --git a/content/documentation/Ox64/Further_information/Datasheets.adoc b/content/documentation/Ox64/Further_information/Datasheets.adoc deleted file mode 100644 index ff965803..00000000 --- a/content/documentation/Ox64/Further_information/Datasheets.adoc +++ /dev/null @@ -1,30 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "Ox64/Further_information" - identifier: "Ox64/Further_information/Datasheets" - weight: ---- - -Bouffalo BL808 SoC information: - -* https://raw.githubusercontent.com/bouffalolab/bl_docs/main/BL808_DS/en/BL808_DS_1.2_en.pdf[Bouffalo Lab BL808 SoC Datasheet] -* https://files.pine64.org/doc/datasheet/ox64/BL808_RM_en_1.0(open).pdf[Bouffalo Lab BL808 SoC Reference Manual] - -SPI NOR Flash information: - -* https://files.pine64.org/doc/datasheet/ox64/gd25lq16e_rev1.2_20210108.pdf[GigaDevice 16Mb XSPI-Flash Datasheet] -* https://files.pine64.org/doc/datasheet/star64/gd25lq128e_rev1.0_20210513.pdf[GigaDevice 128Mb XSPI-Flash Datasheet] -* https://wiki.pine64.org/images/5/5d/W25Q128JW_RevB_11042019-1761358.pdf[Winbond 128Mb QSPI-Flash Datasheet] (W25Q128JWSQ) - -Power Regulator information: - -* https://files.pine64.org/doc/datasheet/ox64/IA2014-03.pdf[Innovation Analog Tech IA2014 Step_down Converter Datasheet] - -MicroSD socket information: - -* https://files.pine64.org/doc/datasheet/ox64/TF%20PUSH%20type%20socket%20specification.pdf[Push type microSD socket specification] - diff --git a/content/documentation/Ox64/Further_information/Datasheets.md b/content/documentation/Ox64/Further_information/Datasheets.md new file mode 100644 index 00000000..bc05027a --- /dev/null +++ b/content/documentation/Ox64/Further_information/Datasheets.md @@ -0,0 +1,29 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "Ox64/Further_information" + identifier: "Ox64/Further_information/Datasheets" + weight: +--- + +Bouffalo BL808 SoC information: + +* [Bouffalo Lab BL808 SoC Datasheet](https://raw.githubusercontent.com/bouffalolab/bl_docs/main/BL808_DS/en/BL808_DS_1.2_en.pdf) +* [Bouffalo Lab BL808 SoC Reference Manual](https://files.pine64.org/doc/datasheet/ox64/BL808_RM_en_1.0(open).pdf) + +SPI NOR Flash information: + +* [GigaDevice 16Mb XSPI-Flash Datasheet](https://files.pine64.org/doc/datasheet/ox64/gd25lq16e_rev1.2_20210108.pdf) +* [GigaDevice 128Mb XSPI-Flash Datasheet](https://files.pine64.org/doc/datasheet/star64/gd25lq128e_rev1.0_20210513.pdf) +* [Winbond 128Mb QSPI-Flash Datasheet](https://wiki.pine64.org/images/5/5d/W25Q128JW_RevB_11042019-1761358.pdf) (W25Q128JWSQ) + +Power Regulator information: + +* [Innovation Analog Tech IA2014 Step_down Converter Datasheet](https://files.pine64.org/doc/datasheet/ox64/IA2014-03.pdf) + +MicroSD socket information: + +* [Push type microSD socket specification](https://files.pine64.org/doc/datasheet/ox64/TF%20PUSH%20type%20socket%20specification.pdf) diff --git a/content/documentation/Ox64/Further_information/Resources.adoc b/content/documentation/Ox64/Further_information/Resources.adoc deleted file mode 100644 index 8d1a7fd9..00000000 --- a/content/documentation/Ox64/Further_information/Resources.adoc +++ /dev/null @@ -1,41 +0,0 @@ ---- -title: "Resources" -draft: false -menu: - docs: - title: - parent: "Ox64/Further_information" - identifier: "Ox64/Further_information/Resources" - weight: ---- - -* https://www.youtube.com/watch?v=czRtF-UNiEY[Ox64 SBC - Connecting, Flashing and Booting Linux! ($8 from Pine64)]: A short video on how to connect to the Ox64, flash and boot -* https://www.youtube.com/watch?v=vPAk5sq_Ilc[#24.5 Ox64 Pine64 $8 Risc-V SBC - Programming and Booting Linux]: Another video that covers soldering pins, connecting via Pi Pico and flashing Linux and U-Boot -* https://gist.github.com/lupyuen/7a0c697b89abccda8e38b33dfe5ebaff[First batch of Ox64 won't appear as USB serial port] -* https://gist.github.com/lupyuen/2087e9b3fb40aab5e0795bb02a265a3b[First batch of Ox64 tested OK with CH340C/G] -* https://www.robertlipe.com/bl808-not-symmetric/ [First thoughts on the (a)symmetry of Bouffalo Labs BL808 as in Pine64 Ox64] -* https://thelittleengineerthatcould.blogspot.com/2022/12/the-8-linux-computer-part-2.html[The $8 linux computer (with picoprobe-rp2040 programming instructions)] -* https://github.com/p4ddy1/pine_ox64/blob/main/build_toolchain_macos.md[Building the Xuantie GNU Toolchain for Ox64 on macOS and Apple Silicon] - -Ox64 BL808 RISC-V SBC articles by https://lupyuen.codeberg.page/[Lup Yuen LEE]: - -* https://lupyuen.codeberg.page/articles/ox64.html[Booting Linux and (maybe) Apache NuttX RTOS] -* https://lupyuen.codeberg.page/articles/ox2.html[Starting Apache NuttX real-time operating system] -* https://lupyuen.codeberg.page/articles/mmu.html[Sv39 Memory Management Unit] -* https://lupyuen.codeberg.page/articles/app.html[NuttX Apps and Initial RAM Disk] -* https://lupyuen.codeberg.page/articles/plic2.html[UART Interrupt and Platform-Level Interrupt Controller (PLIC)] -* https://lupyuen.codeberg.page/articles/plic3.html[Fixing the UART Interrupt and Platform-Level Interrupt Controller] -* https://www.hackster.io/lupyuen/8-risc-v-sbc-on-a-real-time-operating-system-ox64-nuttx-474358[$8 RISC-V SBC on a Real-Time Operating System: Ox64 + NuttX] -* https://lupyuen.codeberg.page/articles/nim.html[Nim on a Real-Time Operating System: Apache NuttX RTOS + Ox64 BL808 SBC] -* https://lupyuen.codeberg.page/articles/tinyemu2.html[Emulate Ox64 BL808 in the Web Browser: Experiments with TinyEMU RISC-V Emulator and Apache NuttX RTOS] -* https://lupyuen.codeberg.page/articles/tinyemu3.html[Automated Testing with Ox64 BL808 Emulator (Apache NuttX RTOS)] -* https://lupyuen.codeberg.page/articles/quickjs.html[QuickJS JavaScript Engine on a Real-Time Operating System (Apache NuttX RTOS)] -* https://lupyuen.codeberg.page/articles/quickjs2.html[Coding Ox64 BL808 SBC the Drag-n-Drop Way] -* https://lupyuen.codeberg.page/articles/rust5.html[Rust Apps on Ox64 BL808 RISC-V SBC and Apache NuttX RTOS] -* https://youtu.be/Eoy-X4ouuLI[Adventures of Ox64 BL808 RISC-V SBC with Apache NuttX RTOS] - -Git repositories: - -* https://github.com/bouffalolab/bl808-pac[Official Bouffalo BL-808 site] -* https://github.com/sfranzyshen/arduino-bl808[Community made Arduino Core specifically for the Bouffalo Labs BL808 RISC-V MCU] (initial development has been postponed until further notice.) - diff --git a/content/documentation/Ox64/Further_information/Resources.md b/content/documentation/Ox64/Further_information/Resources.md new file mode 100644 index 00000000..209bfd7d --- /dev/null +++ b/content/documentation/Ox64/Further_information/Resources.md @@ -0,0 +1,40 @@ +--- +title: "Resources" +draft: false +menu: + docs: + title: + parent: "Ox64/Further_information" + identifier: "Ox64/Further_information/Resources" + weight: +--- + +* [Ox64 SBC - Connecting, Flashing and Booting Linux! ($8 from Pine64)](https://www.youtube.com/watch?v=czRtF-UNiEY): A short video on how to connect to the Ox64, flash and boot +* [#24.5 Ox64 Pine64 $8 Risc-V SBC - Programming and Booting Linux](https://www.youtube.com/watch?v=vPAk5sq_Ilc): Another video that covers soldering pins, connecting via Pi Pico and flashing Linux and U-Boot +* [First batch of Ox64 won’t appear as USB serial port](https://gist.github.com/lupyuen/7a0c697b89abccda8e38b33dfe5ebaff) +* [First batch of Ox64 tested OK with CH340C/G](https://gist.github.com/lupyuen/2087e9b3fb40aab5e0795bb02a265a3b) +* [https://www.robertlipe.com/bl808-not-symmetric/(First thoughts on the (a)symmetry of Bouffalo Labs BL808 as in Pine64 Ox64) +* [The $8 linux computer (with picoprobe-rp2040 programming instructions)](https://thelittleengineerthatcould.blogspot.com/2022/12/the-8-linux-computer-part-2.html) +* [Building the Xuantie GNU Toolchain for Ox64 on macOS and Apple Silicon](https://github.com/p4ddy1/pine_ox64/blob/main/build_toolchain_macos.md) + +Ox64 BL808 RISC-V SBC articles by [Lup Yuen LEE](https://lupyuen.codeberg.page/): + +* [Booting Linux and (maybe) Apache NuttX RTOS](https://lupyuen.codeberg.page/articles/ox64.html) +* [Starting Apache NuttX real-time operating system](https://lupyuen.codeberg.page/articles/ox2.html) +* [Sv39 Memory Management Unit](https://lupyuen.codeberg.page/articles/mmu.html) +* [NuttX Apps and Initial RAM Disk](https://lupyuen.codeberg.page/articles/app.html) +* [UART Interrupt and Platform-Level Interrupt Controller (PLIC)](https://lupyuen.codeberg.page/articles/plic2.html) +* [Fixing the UART Interrupt and Platform-Level Interrupt Controller](https://lupyuen.codeberg.page/articles/plic3.html) +* [$8 RISC-V SBC on a Real-Time Operating System: Ox64 + NuttX](https://www.hackster.io/lupyuen/8-risc-v-sbc-on-a-real-time-operating-system-ox64-nuttx-474358) +* [Nim on a Real-Time Operating System: Apache NuttX RTOS + Ox64 BL808 SBC](https://lupyuen.codeberg.page/articles/nim.html) +* [Emulate Ox64 BL808 in the Web Browser: Experiments with TinyEMU RISC-V Emulator and Apache NuttX RTOS](https://lupyuen.codeberg.page/articles/tinyemu2.html) +* [Automated Testing with Ox64 BL808 Emulator (Apache NuttX RTOS)](https://lupyuen.codeberg.page/articles/tinyemu3.html) +* [QuickJS JavaScript Engine on a Real-Time Operating System (Apache NuttX RTOS)](https://lupyuen.codeberg.page/articles/quickjs.html) +* [Coding Ox64 BL808 SBC the Drag-n-Drop Way](https://lupyuen.codeberg.page/articles/quickjs2.html) +* [Rust Apps on Ox64 BL808 RISC-V SBC and Apache NuttX RTOS](https://lupyuen.codeberg.page/articles/rust5.html) +* [Adventures of Ox64 BL808 RISC-V SBC with Apache NuttX RTOS](https://youtu.be/Eoy-X4ouuLI) + +Git repositories: + +* [Official Bouffalo BL-808 site](https://github.com/bouffalolab/bl808-pac) +* [Community made Arduino Core specifically for the Bouffalo Labs BL808 RISC-V MCU](https://github.com/sfranzyshen/arduino-bl808) (initial development has been postponed until further notice.) diff --git a/content/documentation/Ox64/Further_information/Schematics_and_certifications.adoc b/content/documentation/Ox64/Further_information/Schematics_and_certifications.adoc deleted file mode 100644 index 2d02a95d..00000000 --- a/content/documentation/Ox64/Further_information/Schematics_and_certifications.adoc +++ /dev/null @@ -1,31 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "Ox64/Further_information" - identifier: "Ox64/Further_information/Schematics_and_certifications" - weight: ---- - -image:/documentation/Ox64/images/ox64_ethphy.png[Pinout for wiring ethernet PHY to EMAC,title="Pinout for wiring ethernet PHY to EMAC", 320,float="right"] - -* Baseboard dimensions: 51 mm x 21 mm x 19 mm x 3.5 mm (breadboard-friendly) -* Input power: 5 V, 0.5 A through the microUSB or USB-C ports - -Production version schematic: - -* https://files.pine64.org/doc/ox64/PINE64_Ox64-Schematic-202221018.pdf[Ox64 Schematic 20221018 v1.1] -* https://files.pine64.org/doc/ox64/PINE64_Ox64_PCB_Placement-Top-20221018.pdf[Ox64 PCB Component placement(ToP) 20221018 v1.1] -* https://files.pine64.org/doc/ox64/PINE64_Ox64_PCB_Placement-Bottom-20221018.pdf[Ox64 PCB Component placement(Bottom) 20221018 v1.1] - -Prototype (dispatched to developers) schematic: - -* https://files.pine64.org/doc/ox64/PINE64_Ox64-Schematic-202221007.pdf[Ox64 Schematic 20221007 v1.0] -* https://files.pine64.org/doc/ox64/PINE64_Ox64_PCB_Placement-Top-20221007.pdf[Ox64 PCB Component placement(ToP) 20221007 v1.0] -* https://files.pine64.org/doc/ox64/PINE64_Ox64_PCB_Placement-Bottom-20221007.pdf[Ox64 PCB Component placement(Bottom) 20221007 v1.0] - -Certifications: - -* Not available yet \ No newline at end of file diff --git a/content/documentation/Ox64/Further_information/Schematics_and_certifications.md b/content/documentation/Ox64/Further_information/Schematics_and_certifications.md new file mode 100644 index 00000000..8a89a64f --- /dev/null +++ b/content/documentation/Ox64/Further_information/Schematics_and_certifications.md @@ -0,0 +1,31 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "Ox64/Further_information" + identifier: "Ox64/Further_information/Schematics_and_certifications" + weight: +--- + +{{< figure src="/documentation/Ox64/images/ox64_ethphy.png" title="Pinout for wiring ethernet PHY to EMAC" width="300">}} + +* Baseboard dimensions: 51 mm x 21 mm x 19 mm x 3.5 mm (breadboard-friendly) +* Input power: 5 V, 0.5 A through the microUSB or USB-C ports + +Production version schematic: + +* [Ox64 Schematic 20221018 v1.1](https://files.pine64.org/doc/ox64/PINE64_Ox64-Schematic-202221018.pdf) +* [Ox64 PCB Component placement(ToP) 20221018 v1.1](https://files.pine64.org/doc/ox64/PINE64_Ox64_PCB_Placement-Top-20221018.pdf) +* [Ox64 PCB Component placement(Bottom) 20221018 v1.1](https://files.pine64.org/doc/ox64/PINE64_Ox64_PCB_Placement-Bottom-20221018.pdf) + +Prototype (dispatched to developers) schematic: + +* [Ox64 Schematic 20221007 v1.0](https://files.pine64.org/doc/ox64/PINE64_Ox64-Schematic-202221007.pdf) +* [Ox64 PCB Component placement(ToP) 20221007 v1.0](https://files.pine64.org/doc/ox64/PINE64_Ox64_PCB_Placement-Top-20221007.pdf) +* [Ox64 PCB Component placement(Bottom) 20221007 v1.0](https://files.pine64.org/doc/ox64/PINE64_Ox64_PCB_Placement-Bottom-20221007.pdf) + +Certifications: + +* Not available yet diff --git a/content/documentation/Ox64/Further_information/SoC_and_Memory_Specification.adoc b/content/documentation/Ox64/Further_information/SoC_and_Memory_Specification.md similarity index 81% rename from content/documentation/Ox64/Further_information/SoC_and_Memory_Specification.adoc rename to content/documentation/Ox64/Further_information/SoC_and_Memory_Specification.md index 3a74ebca..1aea96a6 100644 --- a/content/documentation/Ox64/Further_information/SoC_and_Memory_Specification.adoc +++ b/content/documentation/Ox64/Further_information/SoC_and_Memory_Specification.md @@ -9,11 +9,11 @@ menu: weight: --- -Based on the https://en.bouffalolab.com/product/[Bouffalo Lab BL808] +Based on the [Bouffalo Lab BL808](https://en.bouffalolab.com/product/) -image:/documentation/Ox64/images/BL808_Block_Diagram.jpg[width=500] +{{< figure src="/documentation/Ox64/images/BL808_Block_Diagram.jpg" width="500">}} -== CPU Architecture +## CPU Architecture T-Head C906 480 MHz 64-bit RISC-V CPU: @@ -28,7 +28,7 @@ T-Head C906 480 MHz 64-bit RISC-V CPU: * Supports BHT (8K) and BTB * Compatible with RISC-V PMP, 8 configurable areas * Supports hardware performance monitor (HPM) units -* See https://www.t-head.cn/product/c906?lang=en[here] +* See [here](https://www.t-head.cn/product/c906?lang=en) T-Head E907 320 MHz 32-bit RISC-V CPU: @@ -40,13 +40,12 @@ T-Head E907 320 MHz 32-bit RISC-V CPU: * Supports AXI 4.0 main device interface and AHB 5.0 peripheral interface * 32K instruction cache, two-way set associative structure * 16K data cache, two-way set associative structure -* See https://www.t-head.cn/product/e907?lang=en[here] +* See [here](https://www.t-head.cn/product/e907?lang=en) T-Head E902 150 MHz 32-bit RISC-V CPU: -* See https://www.t-head.cn/product/e902?lang=en[here] +* See [here](https://www.t-head.cn/product/e902?lang=en) -== System Memory +## System Memory * Embedded 64MB PSRAM - diff --git a/content/documentation/Ox64/Software/Releases.adoc b/content/documentation/Ox64/Software/Releases.adoc deleted file mode 100644 index ccc1db79..00000000 --- a/content/documentation/Ox64/Software/Releases.adoc +++ /dev/null @@ -1,43 +0,0 @@ ---- -title: "Releases" -draft: false -menu: - docs: - title: - parent: "Ox64/Software" - identifier: "Ox64/Software/Releases" - weight: 1 ---- - -== Quick Links to the Source of OS Images Build - -There is a community effort to bring updated kernels, peripherals and buildroot - Lots of communication happening in the #ox64-nutcracker channel. - -* https://github.com/openbouffalo/buildroot_bouffalo[buildroot] bringing all the work below together with a bootable kernel and updated filesystem images for SD cards -* https://github.com/smaeul/u-boot/tree/bl808[U-Boot] and https://github.com/smaeul/opensbi/tree/bl808[OpenSBI] work by Smauel -* https://github.com/arm000/linux-bl808/tree/linux-next/mboxic[Kernel] IRQChip, SDCard, and (WIP) USB by arm000, Alexander Horner and others -* https://github.com/openbouffalo/OBLFR[OpenBouffalo Firmware] low_load drivers by Fishwaldo and others - -Original Linux Images provided by Bouffalo - Very basic *alpha build* which are only fit for board bring up and testing purposes. - -* https://github.com/bouffalolab/bl808_linux[Linux for BL808] -* https://wiki.pine64.org/wiki/File:Linux_BL808.pdf[Installation Instructions for Linux on BL808 (Chinese)] -* https://wiki.pine64.org/wiki/File:Linux_BL808_en.pdf[Installation Instructions for Linux on BL808 (machine-translated to English)] - -Toolchain: - -* elf_newlib_toolchain/bin/riscv64-unknown-elf-gcc (Xuantie-900 elf newlib gcc Toolchain V2.2.5 B-20220323) 10.2.0 -* linux_toolchain/bin/riscv64-unknown-linux-gnu-gcc (Xuantie-900 linux-5.10.4 glibc gcc Toolchain V2.2.4 B-20211227) 10.2.0 -* cmake version 3.19.3 - -== Software Development Kits - -* https://github.com/bouffalolab/bl_mcu_sdk[BL808 MCU SDK] -* https://dev.bouffalolab.com/download[BLDevCube Flashing Tool for Windows, macOS and Ubuntu x64] -* https://wiki.pine64.org/wiki/File:Ox64_BL808UART_connect.pdf[Ox64 UART Flashing Guide], see the https://gist.github.com/lupyuen/7a0c697b89abccda8e38b33dfe5ebaff[notes] -* https://github.com/lupyuen/lupyuen.github.io/releases/download/ox64/bl808_demo_event.bin[BL808 Demo Firmware: bl808_demo_event.bin], see the https://gist.github.com/lupyuen/7a0c697b89abccda8e38b33dfe5ebaff[notes] -* https://github.com/lupyuen/lupyuen.github.io/releases/download/ox64/whole_flash_data.bin[BL808 UART Log Firmware: whole_flash_data.bin], see the https://gist.github.com/lupyuen/7a0c697b89abccda8e38b33dfe5ebaff[notes] -* https://github.com/lupyuen/lupyuen.github.io/releases/download/ox64/BL808.DVK.Quick.Start.pdf[BL808 DVK Quick Start] -* https://github.com/bouffalolab/bl808_linux/tree/main/opensbi-0.6-808[OpenSBI for BL808] -* https://github.com/bouffalolab/bl-pac/tree/main/bl808[Rust Peripheral Access Crate (PAC) for BL808] -* https://github.com/bouffalolab/bl-pac/blob/main/bl808/bl808.svd[System View Description (SVD) for BL808] \ No newline at end of file diff --git a/content/documentation/Ox64/Software/Releases.md b/content/documentation/Ox64/Software/Releases.md new file mode 100644 index 00000000..a17c6652 --- /dev/null +++ b/content/documentation/Ox64/Software/Releases.md @@ -0,0 +1,43 @@ +--- +title: "Releases" +draft: false +menu: + docs: + title: + parent: "Ox64/Software" + identifier: "Ox64/Software/Releases" + weight: 1 +--- + +## Quick Links to the Source of OS Images Build + +There is a community effort to bring updated kernels, peripherals and buildroot - Lots of communication happening in the #ox64-nutcracker channel. + +* [buildroot](https://github.com/openbouffalo/buildroot_bouffalo) bringing all the work below together with a bootable kernel and updated filesystem images for SD cards +* [U-Boot](https://github.com/smaeul/u-boot/tree/bl808) and [OpenSBI](https://github.com/smaeul/opensbi/tree/bl808) work by Smauel +* [Kernel](https://github.com/arm000/linux-bl808/tree/linux-next/mboxic) IRQChip, SDCard, and (WIP) USB by arm000, Alexander Horner and others +* [OpenBouffalo Firmware](https://github.com/openbouffalo/OBLFR) low_load drivers by Fishwaldo and others + +Original Linux Images provided by Bouffalo - Very basic **alpha build** which are only fit for board bring up and testing purposes. + +* [Linux for BL808](https://github.com/bouffalolab/bl808_linux) +* [Installation Instructions for Linux on BL808 (Chinese)](https://wiki.pine64.org/wiki/File:Linux_BL808.pdf) +* [Installation Instructions for Linux on BL808 (machine-translated to English)](https://wiki.pine64.org/wiki/File:Linux_BL808_en.pdf) + +Toolchain: + +* elf_newlib_toolchain/bin/riscv64-unknown-elf-gcc (Xuantie-900 elf newlib gcc Toolchain V2.2.5 B-20220323) 10.2.0 +* linux_toolchain/bin/riscv64-unknown-linux-gnu-gcc (Xuantie-900 linux-5.10.4 glibc gcc Toolchain V2.2.4 B-20211227) 10.2.0 +* cmake version 3.19.3 + +## Software Development Kits + +* [BL808 MCU SDK](https://github.com/bouffalolab/bl_mcu_sdk) +* [BLDevCube Flashing Tool for Windows, macOS and Ubuntu x64](https://dev.bouffalolab.com/download) +* [Ox64 UART Flashing Guide](https://wiki.pine64.org/wiki/File:Ox64_BL808UART_connect.pdf), see the [notes](https://gist.github.com/lupyuen/7a0c697b89abccda8e38b33dfe5ebaff) +* [BL808 Demo Firmware: bl808_demo_event.bin](https://github.com/lupyuen/lupyuen.github.io/releases/download/ox64/bl808_demo_event.bin), see the [notes](https://gist.github.com/lupyuen/7a0c697b89abccda8e38b33dfe5ebaff) +* [BL808 UART Log Firmware: whole_flash_data.bin](https://github.com/lupyuen/lupyuen.github.io/releases/download/ox64/whole_flash_data.bin), see the [notes](https://gist.github.com/lupyuen/7a0c697b89abccda8e38b33dfe5ebaff) +* [BL808 DVK Quick Start](https://github.com/lupyuen/lupyuen.github.io/releases/download/ox64/BL808.DVK.Quick.Start.pdf) +* [OpenSBI for BL808](https://github.com/bouffalolab/bl808_linux/tree/main/opensbi-0.6-808) +* [Rust Peripheral Access Crate (PAC) for BL808](https://github.com/bouffalolab/bl-pac/tree/main/bl808) +* [System View Description (SVD) for BL808](https://github.com/bouffalolab/bl-pac/blob/main/bl808/bl808.svd) diff --git a/content/documentation/Ox64/_index.adoc b/content/documentation/Ox64/_index.adoc deleted file mode 100644 index 223cced2..00000000 --- a/content/documentation/Ox64/_index.adoc +++ /dev/null @@ -1,16 +0,0 @@ ---- -title: "Ox64" -draft: false -menu: - docs: - title: - parent: "" - identifier: "Ox64" - weight: ---- - -The *Ox64* is a RISC-V based single-board computer based on the Bouffalo Lab BL808 RISC-V SoC with C906 64-bit and E907/E902 32-bit CPU cores supported by 64 MB of embedded PSRAM memory, and with built-in WiFi, Bluetooth and Zigbee radio interfaces. The Ox64 comes in a breadboard-friendly form-factor, has a microSD card slot, a USB 2.0 Type-C port, and many other peripheral interfaces for makers to integrate with sensors and other devices. - -image:/documentation/Ox64/images/Ox64_board.jpg[The Ox64,title="The Ox64", 100] - -image:/documentation/Ox64/images/ox64_pinout.png[Pinout of the production version,title="Pinout of the production version", 300] \ No newline at end of file diff --git a/content/documentation/Ox64/_index.md b/content/documentation/Ox64/_index.md new file mode 100644 index 00000000..8378c4b4 --- /dev/null +++ b/content/documentation/Ox64/_index.md @@ -0,0 +1,16 @@ +--- +title: "Ox64" +draft: false +menu: + docs: + title: + parent: "" + identifier: "Ox64" + weight: +--- + +The **Ox64** is a RISC-V based single-board computer based on the Bouffalo Lab BL808 RISC-V SoC with C906 64-bit and E907/E902 32-bit CPU cores supported by 64 MB of embedded PSRAM memory, and with built-in WiFi, Bluetooth and Zigbee radio interfaces. The Ox64 comes in a breadboard-friendly form-factor, has a microSD card slot, a USB 2.0 Type-C port, and many other peripheral interfaces for makers to integrate with sensors and other devices. + +{{< figure src="/documentation/Ox64/images/Ox64_board.jpg" title="The Ox64" width="300">}} + +{{< figure src="/documentation/Ox64/images/ox64_pinout.png" title="Pinout of the production version" width="300">}} diff --git a/content/documentation/Oz64/Building.adoc b/content/documentation/Oz64/Building.md similarity index 54% rename from content/documentation/Oz64/Building.adoc rename to content/documentation/Oz64/Building.md index c20571ed..5500e032 100644 --- a/content/documentation/Oz64/Building.adoc +++ b/content/documentation/Oz64/Building.md @@ -9,4 +9,4 @@ menu: weight: 3 --- -See link:https://lupyuen.github.io/articles/sg2000#appendix-build-nuttx-for-sg2000[Nuttx Build] by Lup Yuen +See [Nuttx Build](https://lupyuen.github.io/articles/sg2000#appendix-build-nuttx-for-sg2000) by Lup Yuen diff --git a/content/documentation/Oz64/Certifications.adoc b/content/documentation/Oz64/Certifications.md similarity index 92% rename from content/documentation/Oz64/Certifications.adoc rename to content/documentation/Oz64/Certifications.md index 655569ca..5cccc196 100644 --- a/content/documentation/Oz64/Certifications.adoc +++ b/content/documentation/Oz64/Certifications.md @@ -10,4 +10,4 @@ menu: --- * Disclaimer: Please note that PINE64 SBC is not a "final" product and in general certification is not necessary. -* Not yet available \ No newline at end of file +* Not yet available diff --git a/content/documentation/Oz64/Datasheets.adoc b/content/documentation/Oz64/Datasheets.adoc deleted file mode 100644 index 8823fad7..00000000 --- a/content/documentation/Oz64/Datasheets.adoc +++ /dev/null @@ -1,30 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "Oz64" - identifier: "Oz64/Datasheets" - weight: 99 ---- - -== Datasheets for Components and Peripherals - -Sophgo SG2000 SoC information: - -* https://github.com/sophgo/sophgo-doc/releases/download/sg2000-trm-v1.0/sg2000_trm_en.pdf[Sophgo SG2000 SoC Technical Reference Manual] - -Wi-Fi and Bluetooth information: - -* https://files.pine64.org/doc/datasheet/oz64/AIC8800DC%20Datasheet%20v1.0.pdf[AIC Semi AIC8800DC Datasheet] - -Power Regulator information: - -* https://files.pine64.org/doc/datasheet/oz64/ETA3414_V1.6.pdf[Empower ETA3414 1.5A 3MHz Step_down Converter Datasheet] -* https://files.pine64.org/doc/datasheet/oz64/ETA3418_V1.4.pdf[Empower ETA3418 2.5A 3MHz Step_down Converter Datasheet] -* https://files.pine64.org/doc/datasheet/oz64/ETA5050_V2.4.pdf[Empower ETA5050 500mA Low Noise, High PSRR, Fast Transient Response LDO Datasheet] - -MicroSD socket information: - -* https://files.pine64.org/doc/datasheet/ox64/TF%20PUSH%20type%20socket%20specification.pdf[Push type microSD socket specification] diff --git a/content/documentation/Oz64/Datasheets.md b/content/documentation/Oz64/Datasheets.md new file mode 100644 index 00000000..11e18f1b --- /dev/null +++ b/content/documentation/Oz64/Datasheets.md @@ -0,0 +1,30 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "Oz64" + identifier: "Oz64/Datasheets" + weight: 99 +--- + +## Datasheets for Components and Peripherals + +Sophgo SG2000 SoC information: + +* [Sophgo SG2000 SoC Technical Reference Manual](https://github.com/sophgo/sophgo-doc/releases/download/sg2000-trm-v1.0/sg2000_trm_en.pdf) + +Wi-Fi and Bluetooth information: + +* [AIC Semi AIC8800DC Datasheet](https://files.pine64.org/doc/datasheet/oz64/AIC8800DC%20Datasheet%20v1.0.pdf) + +Power Regulator information: + +* [Empower ETA3414 1.5A 3MHz Step_down Converter Datasheet](https://files.pine64.org/doc/datasheet/oz64/ETA3414_V1.6.pdf) +* [Empower ETA3418 2.5A 3MHz Step_down Converter Datasheet](https://files.pine64.org/doc/datasheet/oz64/ETA3418_V1.4.pdf) +* [Empower ETA5050 500mA Low Noise, High PSRR, Fast Transient Response LDO Datasheet](https://files.pine64.org/doc/datasheet/oz64/ETA5050_V2.4.pdf) + +MicroSD socket information: + +* [Push type microSD socket specification](https://files.pine64.org/doc/datasheet/ox64/TF%20PUSH%20type%20socket%20specification.pdf) diff --git a/content/documentation/Oz64/Releases.adoc b/content/documentation/Oz64/Releases.md similarity index 56% rename from content/documentation/Oz64/Releases.adoc rename to content/documentation/Oz64/Releases.md index bdb9b24c..f330805b 100644 --- a/content/documentation/Oz64/Releases.adoc +++ b/content/documentation/Oz64/Releases.md @@ -9,11 +9,11 @@ menu: weight: 2 --- -== Sources +## Sources -There is a community effort to bring updated kernels, peripherals and buildroot - Lots of communication happening in the #ox64-nutcracker channel, see link:/community/[Community]. +There is a community effort to bring updated kernels, peripherals and buildroot - Lots of communication happening in the #ox64-nutcracker channel, see [Community](/community/). -* https://github.com/lupyuen2/wip-nuttx/releases/download/sg2000-1/Image[Nuttx Released Image] by Lup Yuen +* [Nuttx Released Image](https://github.com/lupyuen2/wip-nuttx/releases/download/sg2000-1/Image) by Lup Yuen Toolchain: @@ -21,7 +21,7 @@ Toolchain: * linux_toolchain/bin/riscv64-unknown-linux-gnu-gcc (Xuantie-900 linux-5.10.4 glibc gcc Toolchain V2.2.4 B-20211227) 10.2.0 * cmake version 3.19.3 -== Software Development Kits -* https://github.com/sophgo/tdl_models[SG200x NPU TDL SDK] -* https://github.com/Fishwaldo/sophgo-sg200x-debian/releases[Fishwaldo SG200x Debian] -* https://github.com/lupyuen/nuttx-sg2000[Lup Yuen Apache NuttX RTOS] +## Software Development Kits +* [SG200x NPU TDL SDK](https://github.com/sophgo/tdl_models) +* [Fishwaldo SG200x Debian](https://github.com/Fishwaldo/sophgo-sg200x-debian/releases) +* [Lup Yuen Apache NuttX RTOS](https://github.com/lupyuen/nuttx-sg2000) diff --git a/content/documentation/Oz64/Schematics.adoc b/content/documentation/Oz64/Schematics.adoc deleted file mode 100644 index 37a2af8e..00000000 --- a/content/documentation/Oz64/Schematics.adoc +++ /dev/null @@ -1,16 +0,0 @@ ---- -title: "Schematics" -draft: false -menu: - docs: - title: - parent: "Oz64" - identifier: "Oz64/Schematics" - weight: 97 ---- - -Pre-Production version schematic: - -* https://files.pine64.org/doc/oz64/PINE64_Oz64_Schematic-20240517.pdf[Oz64 Schematic 20240517 v1.0.0] -* https://files.pine64.org/doc/oz64/PINE64_Oz64_PCB_Placement-Top-20240517.pdf[Oz64 PCB Component placement(ToP) 20240517 v1.0.0] -* https://files.pine64.org/doc/oz64/PINE64_Oz64_PCB_Placement-Bottom-20240517.pdf[Oz64 PCB Component placement(Bottom) 20240517 v1.0.0] \ No newline at end of file diff --git a/content/documentation/Oz64/Schematics.md b/content/documentation/Oz64/Schematics.md new file mode 100644 index 00000000..b0cbf44d --- /dev/null +++ b/content/documentation/Oz64/Schematics.md @@ -0,0 +1,16 @@ +--- +title: "Schematics" +draft: false +menu: + docs: + title: + parent: "Oz64" + identifier: "Oz64/Schematics" + weight: 97 +--- + +Pre-Production version schematic: + +* [Oz64 Schematic 20240517 v1.0.0](https://files.pine64.org/doc/oz64/PINE64_Oz64_Schematic-20240517.pdf) +* [Oz64 PCB Component placement(ToP) 20240517 v1.0.0](https://files.pine64.org/doc/oz64/PINE64_Oz64_PCB_Placement-Top-20240517.pdf) +* [Oz64 PCB Component placement(Bottom) 20240517 v1.0.0](https://files.pine64.org/doc/oz64/PINE64_Oz64_PCB_Placement-Bottom-20240517.pdf) diff --git a/content/documentation/PINE_H64_Model_A/Further_information/Datasheets.adoc b/content/documentation/PINE_H64_Model_A/Further_information/Datasheets.adoc deleted file mode 100644 index aba2c71e..00000000 --- a/content/documentation/PINE_H64_Model_A/Further_information/Datasheets.adoc +++ /dev/null @@ -1,64 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "PINE_H64_Model_A/Further_information" - identifier: "PINE_H64_Model_A/Further_information/Datasheets" - weight: 1 ---- - -Allwinner H6 SoC information: - -* https://files.pine64.org/doc/datasheet/pine-h64/Allwinner-H6-Brief_V1.0.pdf[Allwinner H6 SoC Brief Introduction] -* https://files.pine64.org/doc/datasheet/pine-h64/Allwinner_H6%20V200_Datasheet_V1.1.pdf[Allwinner H6 SoC Data Sheet V1.1 (Official Released Version)] -* https://files.pine64.org/doc/datasheet/pine-h64/Allwinner_H6%20V200_User_Manual_V1.1.pdf[Allwinner H6 SoC User Manual V1.0 (Official Release Version)] - -X-Powers AXP805 PMU (Power Management Unit) information: - -* https://files.pine64.org/doc/datasheet/pine-h64/AXP805_Datasheet_V1.0_en.pdf[X-Powers AXP805 Data Sheet V1.0 (Official Release Version)] - -LPDDR3 (178 Balls) SDRAM: - -* https://files.pine64.org/doc/rock64/H9CCNNNCLTMLAR(Rev1.2).pdf[Hynix LPDDR3 Datasheet V1.2] -* https://files.pine64.org/doc/rock64/K4E8E324EB-EGCF000_DRAM_178F_11x11.5_Ver.1.00.00.pdf[Samsung LPDDR3 Datasheet V1.00.00] -* https://files.pine64.org/doc/rock64/SPECTEK_178B_32GB_V91M_MOBILE_LPDDR3.pdf[Spectek LPDDR3 Datasheet] - -eMMC information: - -* https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf[PINE64 eMMC module schematic] -* https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf[PINE64 USB adapter for eMMC module V2 schematic] -* https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar[PINE64 USB adapter for eMMC module PCB in JPEG] -* https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf[SanDisk eMMC Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/H26M64003DQR%20Datasheet.pdf[Hynix eMMC Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/FORESEE_eMMC_NCEMBSF9-xxG%20SPEC%20A0%2020150730.pdf[Foresee eMMC Datasheet] - -SPI NOR Flash information: - -* https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf[WinBond 128Mb SPI Flash Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf[GigaDevice 128Mb SPI Flash Datasheet] - -Ethernet PHY information: - -* https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf[Realtek RTL8211 10/100/1000M Ethernet Transceiver for PINE H64 Board] - -Wifi/BT module information: - -* https://files.pine64.org/doc/datasheet/pine-h64/AP6356_datasheet_V1.0_07252014.pdf[AMPAK AP6356 2x2WiFi with BT 4.1 SDIO] -* https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf[Realtek RTL8723BS 1x1 WiFi with BT 4.0 SDIO] - -miniPCIe SATA module information: - -* https://files.pine64.org/doc/datasheet/pine-h64/miniPCIe%20connector.jpg[Molex miniPCie Socket information] -* https://files.pine64.org/doc/datasheet/pine-h64/ASM1061_Data%20Sheet_R1_8.pdf[ASmedia ASM1061 2x2WiFi with BT 4.1 SDIO] - -Enclosure information: - -* https://files.pine64.org/doc/datasheet/case/ABS_enclosure_20160426.stp[ABS Enclosure 3D file] -* https://files.pine64.org/doc/datasheet/case/pine64%20Die%20Cast%20casing-final.jpg[Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing] - -Remote control button mapping - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg[Official Remote Control for the PINE H64 Button Mapping] - diff --git a/content/documentation/PINE_H64_Model_A/Further_information/Datasheets.md b/content/documentation/PINE_H64_Model_A/Further_information/Datasheets.md new file mode 100644 index 00000000..894e49fb --- /dev/null +++ b/content/documentation/PINE_H64_Model_A/Further_information/Datasheets.md @@ -0,0 +1,63 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "PINE_H64_Model_A/Further_information" + identifier: "PINE_H64_Model_A/Further_information/Datasheets" + weight: 1 +--- + +Allwinner H6 SoC information: + +* [Allwinner H6 SoC Brief Introduction](https://files.pine64.org/doc/datasheet/pine-h64/Allwinner-H6-Brief_V1.0.pdf) +* [Allwinner H6 SoC Data Sheet V1.1 (Official Released Version)](https://files.pine64.org/doc/datasheet/pine-h64/Allwinner_H6%20V200_Datasheet_V1.1.pdf) +* [Allwinner H6 SoC User Manual V1.0 (Official Release Version)](https://files.pine64.org/doc/datasheet/pine-h64/Allwinner_H6%20V200_User_Manual_V1.1.pdf) + +X-Powers AXP805 PMU (Power Management Unit) information: + +* [X-Powers AXP805 Data Sheet V1.0 (Official Release Version)](https://files.pine64.org/doc/datasheet/pine-h64/AXP805_Datasheet_V1.0_en.pdf) + +LPDDR3 (178 Balls) SDRAM: + +* [Hynix LPDDR3 Datasheet V1.2](https://files.pine64.org/doc/rock64/H9CCNNNCLTMLAR(Rev1.2).pdf) +* [Samsung LPDDR3 Datasheet V1.00.00](https://files.pine64.org/doc/rock64/K4E8E324EB-EGCF000_DRAM_178F_11x11.5_Ver.1.00.00.pdf) +* [Spectek LPDDR3 Datasheet](https://files.pine64.org/doc/rock64/SPECTEK_178B_32GB_V91M_MOBILE_LPDDR3.pdf) + +eMMC information: + +* [PINE64 eMMC module schematic](https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf) +* [PINE64 USB adapter for eMMC module V2 schematic](https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf) +* [PINE64 USB adapter for eMMC module PCB in JPEG](https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar) +* [SanDisk eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf) +* [Hynix eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/H26M64003DQR%20Datasheet.pdf) +* [Foresee eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/FORESEE_eMMC_NCEMBSF9-xxG%20SPEC%20A0%2020150730.pdf) + +SPI NOR Flash information: + +* [WinBond 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf) +* [GigaDevice 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf) + +Ethernet PHY information: + +* [Realtek RTL8211 10/100/1000M Ethernet Transceiver for PINE H64 Board](https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf) + +Wifi/BT module information: + +* [AMPAK AP6356 2x2WiFi with BT 4.1 SDIO](https://files.pine64.org/doc/datasheet/pine-h64/AP6356_datasheet_V1.0_07252014.pdf) +* [Realtek RTL8723BS 1x1 WiFi with BT 4.0 SDIO](https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf) + +miniPCIe SATA module information: + +* [Molex miniPCie Socket information](https://files.pine64.org/doc/datasheet/pine-h64/miniPCIe%20connector.jpg) +* [ASmedia ASM1061 2x2WiFi with BT 4.1 SDIO](https://files.pine64.org/doc/datasheet/pine-h64/ASM1061_Data%20Sheet_R1_8.pdf) + +Enclosure information: + +* [ABS Enclosure 3D file](https://files.pine64.org/doc/datasheet/case/ABS_enclosure_20160426.stp) +* [Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing](https://files.pine64.org/doc/datasheet/case/pine64%20Die%20Cast%20casing-final.jpg) + +Remote control button mapping + +* [Official Remote Control for the PINE H64 Button Mapping](https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg) diff --git a/content/documentation/PINE_H64_Model_A/Further_information/Schematics_and_Certifications.adoc b/content/documentation/PINE_H64_Model_A/Further_information/Schematics_and_Certifications.md similarity index 54% rename from content/documentation/PINE_H64_Model_A/Further_information/Schematics_and_Certifications.adoc rename to content/documentation/PINE_H64_Model_A/Further_information/Schematics_and_Certifications.md index 2a805622..20cdb80b 100644 --- a/content/documentation/PINE_H64_Model_A/Further_information/Schematics_and_Certifications.adoc +++ b/content/documentation/PINE_H64_Model_A/Further_information/Schematics_and_Certifications.md @@ -9,13 +9,12 @@ menu: weight: 2 --- -* https://files.pine64.org/doc/Pine%20H64/Pine%20H64%20Port%20Assignment%20rev1.0.pdf[PINE H64 Pi-2/Euler/Ext Bus Connector Pin Assignment] +* [PINE H64 Pi-2/Euler/Ext Bus Connector Pin Assignment](https://files.pine64.org/doc/Pine%20H64/Pine%20H64%20Port%20Assignment%20rev1.0.pdf) PINE H64 Board Schematic: -* https://files.pine64.org/doc/Pine%20H64/Pine%20H64%20Ver1.1-20180104.pdf[PINE H64 1GB/2GB/3GB Rev 1.1 Board Schematic] +* [PINE H64 1GB/2GB/3GB Rev 1.1 Board Schematic](https://files.pine64.org/doc/Pine%20H64/Pine%20H64%20Ver1.1-20180104.pdf) PINE H64 Certification: * [Not yet available] - diff --git a/content/documentation/PINE_H64_Model_B/Further_information/Datasheets.adoc b/content/documentation/PINE_H64_Model_B/Further_information/Datasheets.adoc deleted file mode 100644 index ed7ebee5..00000000 --- a/content/documentation/PINE_H64_Model_B/Further_information/Datasheets.adoc +++ /dev/null @@ -1,52 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "PINE_H64_Model_B/Further_information" - identifier: "PINE_H64_Model_B/Further_information/Datasheets" - weight: 1 ---- - -Allwinner H6 SoC information: - -* https://files.pine64.org/doc/datasheet/pine-h64/Allwinner-H6-Brief_V1.0.pdf[Allwinner H6 SoC Brief Introduction] -* https://files.pine64.org/doc/datasheet/pine-h64/Allwinner_H6%20V200_Datasheet_V1.1.pdf[Allwinner H6 SoC Data Sheet V1.1 (Official Released Version)] -* https://files.pine64.org/doc/datasheet/pine-h64/Allwinner_H6%20V200_User_Manual_V1.1.pdf[Allwinner H6 SoC User Manual V1.0 (Official Release Version)] - -X-Powers AXP805 PMU (Power Management Unit) information: - -* https://files.pine64.org/doc/datasheet/pine-h64/AXP805_Datasheet_V1.0_en.pdf[X-Powers AXP805 Data Sheet V1.0 (Official Release Version)] - -LPDDR3 (178 Balls) SDRAM: - -* https://files.pine64.org/doc/rock64/H9CCNNNCLTMLAR(Rev1.2).pdf[Hynix LPDDR3 Datasheet V1.2] -* https://files.pine64.org/doc/rock64/K4E8E324EB-EGCF000_DRAM_178F_11x11.5_Ver.1.00.00.pdf[Samsung LPDDR3 Datasheet V1.00.00] -* https://files.pine64.org/doc/rock64/SPECTEK_178B_32GB_V91M_MOBILE_LPDDR3.pdf[Spectek LPDDR3 Datasheet] - -eMMC information: - -* https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf[PINE64 eMMC module schematic] -* https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf[PINE64 USB adapter for eMMC module V2 schematic] -* https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar[PINE64 USB adapter for eMMC module PCB in JPEG] -* https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf[16GB Foresee eMMC Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf[32GB/64GB/128GB SanDisk eMMC Datasheet] - -SPI NOR Flash information: - -* https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf[WinBond 128Mb SPI Flash Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf[GigaDevice 128Mb SPI Flash Datasheet] - -Ethernet PHY information: - -* https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf[Realtek RTL8211 10/100/1000M Ethernet Transceiver for PINE H64 Board] - -Wifi/BT module information: - -* https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf[Realtek RTL8723BS WiFi with BT SDIO] - -Remote control button mapping: - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg[Official Remote Control for the PINE H64 Button Mapping] - diff --git a/content/documentation/PINE_H64_Model_B/Further_information/Datasheets.md b/content/documentation/PINE_H64_Model_B/Further_information/Datasheets.md new file mode 100644 index 00000000..2b87ff0d --- /dev/null +++ b/content/documentation/PINE_H64_Model_B/Further_information/Datasheets.md @@ -0,0 +1,51 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "PINE_H64_Model_B/Further_information" + identifier: "PINE_H64_Model_B/Further_information/Datasheets" + weight: 1 +--- + +Allwinner H6 SoC information: + +* [Allwinner H6 SoC Brief Introduction](https://files.pine64.org/doc/datasheet/pine-h64/Allwinner-H6-Brief_V1.0.pdf) +* [Allwinner H6 SoC Data Sheet V1.1 (Official Released Version)](https://files.pine64.org/doc/datasheet/pine-h64/Allwinner_H6%20V200_Datasheet_V1.1.pdf) +* [Allwinner H6 SoC User Manual V1.0 (Official Release Version)](https://files.pine64.org/doc/datasheet/pine-h64/Allwinner_H6%20V200_User_Manual_V1.1.pdf) + +X-Powers AXP805 PMU (Power Management Unit) information: + +* [X-Powers AXP805 Data Sheet V1.0 (Official Release Version)](https://files.pine64.org/doc/datasheet/pine-h64/AXP805_Datasheet_V1.0_en.pdf) + +LPDDR3 (178 Balls) SDRAM: + +* [Hynix LPDDR3 Datasheet V1.2](https://files.pine64.org/doc/rock64/H9CCNNNCLTMLAR(Rev1.2).pdf) +* [Samsung LPDDR3 Datasheet V1.00.00](https://files.pine64.org/doc/rock64/K4E8E324EB-EGCF000_DRAM_178F_11x11.5_Ver.1.00.00.pdf) +* [Spectek LPDDR3 Datasheet](https://files.pine64.org/doc/rock64/SPECTEK_178B_32GB_V91M_MOBILE_LPDDR3.pdf) + +eMMC information: + +* [PINE64 eMMC module schematic](https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf) +* [PINE64 USB adapter for eMMC module V2 schematic](https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf) +* [PINE64 USB adapter for eMMC module PCB in JPEG](https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar) +* [16GB Foresee eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf) +* [32GB/64GB/128GB SanDisk eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf) + +SPI NOR Flash information: + +* [WinBond 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf) +* [GigaDevice 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf) + +Ethernet PHY information: + +* [Realtek RTL8211 10/100/1000M Ethernet Transceiver for PINE H64 Board](https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf) + +Wifi/BT module information: + +* [Realtek RTL8723BS WiFi with BT SDIO](https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf) + +Remote control button mapping: + +* [Official Remote Control for the PINE H64 Button Mapping](https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg) diff --git a/content/documentation/PINE_H64_Model_B/Further_information/Schematics_and_Certifications.adoc b/content/documentation/PINE_H64_Model_B/Further_information/Schematics_and_Certifications.adoc deleted file mode 100644 index a30ef932..00000000 --- a/content/documentation/PINE_H64_Model_B/Further_information/Schematics_and_Certifications.adoc +++ /dev/null @@ -1,22 +0,0 @@ ---- -title: "Schematics and Certifications" -draft: false -menu: - docs: - title: - parent: "PINE_H64_Model_B/Further_information" - identifier: "PINE_H64_Model_B/Further_information/Schematics_and_Certifications" - weight: 2 ---- - -* https://files.pine64.org/doc/Pine%20H64/Pine%20H64%20model%20B%20Port%20Assignment%20rev2.0.pdf[PINE H64 Model B Pi-2 Bus and EXP Bus Connector Pin Assignment] - -PINE H64 board schematics: - -* https://files.pine64.org/doc/Pine%20H64/PINE-H6-model-B-20181212-schematic.pdf[PINE H64 Model B 1GB/2GB/3GB Rev 1.2 Board Schematic] - -PINE H64 Model B certification: - -* https://files.pine64.org/doc/cert/PINE-H64B%20FCC%20S19041102001001%20Certificate.pdf[PINE-H64 Model-B FCC Certificate] -* https://files.pine64.org/doc/cert/PINE-H64B%20CE-EMC%20S19041102001001%20Certificate.pdf[PINE-H64 Model-B CE Certificate]] - diff --git a/content/documentation/PINE_H64_Model_B/Further_information/Schematics_and_Certifications.md b/content/documentation/PINE_H64_Model_B/Further_information/Schematics_and_Certifications.md new file mode 100644 index 00000000..89c8c1c2 --- /dev/null +++ b/content/documentation/PINE_H64_Model_B/Further_information/Schematics_and_Certifications.md @@ -0,0 +1,21 @@ +--- +title: "Schematics and Certifications" +draft: false +menu: + docs: + title: + parent: "PINE_H64_Model_B/Further_information" + identifier: "PINE_H64_Model_B/Further_information/Schematics_and_Certifications" + weight: 2 +--- + +* [PINE H64 Model B Pi-2 Bus and EXP Bus Connector Pin Assignment](https://files.pine64.org/doc/Pine%20H64/Pine%20H64%20model%20B%20Port%20Assignment%20rev2.0.pdf) + +PINE H64 board schematics: + +* [PINE H64 Model B 1GB/2GB/3GB Rev 1.2 Board Schematic](https://files.pine64.org/doc/Pine%20H64/PINE-H6-model-B-20181212-schematic.pdf) + +PINE H64 Model B certification: + +* [PINE-H64 Model-B FCC Certificate](https://files.pine64.org/doc/cert/PINE-H64B%20FCC%20S19041102001001%20Certificate.pdf) +* [PINE-H64 Model-B CE Certificate](https://files.pine64.org/doc/cert/PINE-H64B%20CE-EMC%20S19041102001001%20Certificate.pdf)] diff --git a/content/documentation/Phone_Accessories/Cases.adoc b/content/documentation/Phone_Accessories/Cases.adoc deleted file mode 100644 index 269d5afb..00000000 --- a/content/documentation/Phone_Accessories/Cases.adoc +++ /dev/null @@ -1,25 +0,0 @@ ---- -title: "Cases" -draft: false -menu: - docs: - title: - parent: "Phone_Accessories" - identifier: "Phone_Accessories/Cases" - weight: 1 ---- - -The Pine store has official cases: - -* https://pine64.com/?product=pinephone-hard-protective-case&v=0446c16e2e66[PinePhone Hard Protective Case] -* https://pine64.com/product/pinephone-soft-tpu-protective-case[PinePhone Soft TPU Protective Case] - -Tight-fit cases of other phones can't be used with the PinePhone because most times the proportions and/or camera notch won't fit. The phone can however be used with most "phone sleeves", such as those from fitBAG. The sleeve from fitBAG for the Xiaomi Redmi Note 8 Pro fits the PinePhone tightly. - -The OtterBox uniVERSE Case for Samsung Galaxy XCover Pro is https://forum.pine64.org/showthread.php?tid=17580&pid=114227[reported to fit the PinePhone well] without much modification. - -The following accessory is made by the community: - -* https://www.thingiverse.com/thing:4658870[PinePhone Hard Case by _The3DmaN_ at Thingverse] -* https://www.thingiverse.com/thing:5238124[PinePhone TPU Case by _The3DmaN_ at Thingverse] -* https://www.thingiverse.com/thing:4651177[PinePhone Hard Case by blitzaxt at Thingverse] \ No newline at end of file diff --git a/content/documentation/Phone_Accessories/Cases.md b/content/documentation/Phone_Accessories/Cases.md new file mode 100644 index 00000000..899ad475 --- /dev/null +++ b/content/documentation/Phone_Accessories/Cases.md @@ -0,0 +1,25 @@ +--- +title: "Cases" +draft: false +menu: + docs: + title: + parent: "Phone_Accessories" + identifier: "Phone_Accessories/Cases" + weight: 1 +--- + +The Pine store has official cases: + +* [PinePhone Hard Protective Case](https://pine64.com/?product=pinephone-hard-protective-case&v=0446c16e2e66) +* [PinePhone Soft TPU Protective Case](https://pine64.com/product/pinephone-soft-tpu-protective-case) + +Tight-fit cases of other phones can’t be used with the PinePhone because most times the proportions and/or camera notch won’t fit. The phone can however be used with most "phone sleeves", such as those from fitBAG. The sleeve from fitBAG for the Xiaomi Redmi Note 8 Pro fits the PinePhone tightly. + +The OtterBox uniVERSE Case for Samsung Galaxy XCover Pro is [reported to fit the PinePhone well](https://forum.pine64.org/showthread.php?tid=17580&pid=114227) without much modification. + +The following accessory is made by the community: + +* [PinePhone Hard Case by _The3DmaN_ at Thingverse](https://www.thingiverse.com/thing:4658870) +* [PinePhone TPU Case by _The3DmaN_ at Thingverse](https://www.thingiverse.com/thing:5238124) +* [PinePhone Hard Case by blitzaxt at Thingverse](https://www.thingiverse.com/thing:4651177) diff --git a/content/documentation/Phone_Accessories/Screen_protectors.adoc b/content/documentation/Phone_Accessories/Screen_protectors.md similarity index 66% rename from content/documentation/Phone_Accessories/Screen_protectors.adoc rename to content/documentation/Phone_Accessories/Screen_protectors.md index b1682d22..f16f89ad 100644 --- a/content/documentation/Phone_Accessories/Screen_protectors.adoc +++ b/content/documentation/Phone_Accessories/Screen_protectors.md @@ -9,6 +9,6 @@ menu: weight: 2 --- -The official screen protector can be found in the Pine64 store under https://pine64.com/product/pinephone-tempered-glass-screen-protector/?v=0446c16e2e66[PinePhone Tempered Glass Screen Protector]. +The official screen protector can be found in the Pine64 store under [PinePhone Tempered Glass Screen Protector](https://pine64.com/product/pinephone-tempered-glass-screen-protector/?v=0446c16e2e66). -Most screen protectors for the iPhone 11 Pro Max, iPhone XS Max and Huawei Y7 (2018) fit the PinePhone if the top notch is not obscured by a black foil or a similar obstruction. \ No newline at end of file +Most screen protectors for the iPhone 11 Pro Max, iPhone XS Max and Huawei Y7 (2018) fit the PinePhone if the top notch is not obscured by a black foil or a similar obstruction. diff --git a/content/documentation/Phone_Accessories/_index.adoc b/content/documentation/Phone_Accessories/_index.md similarity index 57% rename from content/documentation/Phone_Accessories/_index.adoc rename to content/documentation/Phone_Accessories/_index.md index 6404ef50..766040ba 100644 --- a/content/documentation/Phone_Accessories/_index.adoc +++ b/content/documentation/Phone_Accessories/_index.md @@ -11,26 +11,26 @@ menu: The following add-ons are available: -* link:Keyboard[Keyboard] -* link:Fingerprint_reader[Fingerprint Reader Add-on] -* link:Qi_wireless_charging[Qi Wireless Charging Add-on] -* link:LoRa[LoRa Add-on] +* [Keyboard](Keyboard) +* [Fingerprint Reader Add-on](Fingerprint_reader) +* [Qi Wireless Charging Add-on](Qi_wireless_charging) +* [LoRa Add-on](LoRa) -== Protection +## Protection The compatible cases can be found under: -* link:Cases[Cases] +* [Cases](Cases) The compatible screen protectors can be found under: -* link:Screen_protectors[Screen protectors] +* [Screen protectors](Screen_protectors) -== Stands +## Stands The following accessory is made by the community: -* https://www.thingiverse.com/thing:4654013[PinePhone Development Stand at Thingverse] +* [PinePhone Development Stand at Thingverse](https://www.thingiverse.com/thing:4654013) -== Hubs -USB hubs do not require a custom driver and are therefore expected to be compatible with the PinePhone, as long as they are within the USB specification. On revisions the PinePhone mainboard revisions v1.1 and v1.2 the VCONN fix is required, on v1.2a and later the USB hub should work out of the box, see link:/documentation/PinePhone/Revisions[PinePhone]. \ No newline at end of file +## Hubs +USB hubs do not require a custom driver and are therefore expected to be compatible with the PinePhone, as long as they are within the USB specification. On revisions the PinePhone mainboard revisions v1.1 and v1.2 the VCONN fix is required, on v1.2a and later the USB hub should work out of the box, see [PinePhone](/documentation/PinePhone/Revisions). diff --git a/content/documentation/PineBuds_Pro/Further_information/Datasheets.adoc b/content/documentation/PineBuds_Pro/Further_information/Datasheets.adoc deleted file mode 100644 index 24c478f1..00000000 --- a/content/documentation/PineBuds_Pro/Further_information/Datasheets.adoc +++ /dev/null @@ -1,28 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "PineBuds_Pro/Further_information" - identifier: "PineBuds_Pro/Further_information/Datasheets" - weight: 1 ---- - -BES 2300YP SoC information: - -* https://files.pine64.org/doc/datasheet/PineBudsPro/BES2300-YP_Datasheet_v1.0.pdf[BES 2300-YP Datasheet V1.0] - -Charging case: - -* https://files.pine64.org/doc/datasheet/PineBudsPro/SY8821_SPEC_V1_2_2.pdf[ThinkPlus Semi SY8821 Datasheet in Chinese] -* https://files.pine64.org/doc/datasheet/PineBudsPro/CH342DS1.PDF[WCH Tech CH342DS USB to Dual Serial ports chip Datasheet] -* https://files.pine64.org/doc/datasheet/PineBudsPro/COPO%20CP2021%202.5W%20Qi%20Wire%20Power%20Receiver.pdf[COPO CP2021 2.5W Qi Wire Power Receiver Datasheet (Unpopulated)] - -EarBuds: - -* https://files.pine64.org/doc/datasheet/PineBudsPro/CE3156-EN-01.pdf[ChiPower Tech CE3156 Single Cell Charger Datasheet] -* https://files.pine64.org/doc/datasheet/PineBudsPro/LP3992-33B5F.pdf[LowPower Semi LP3992 LDO Regulator Datasheet] -* https://files.pine64.org/doc/datasheet/PineBudsPro/HLW-YHX190_20190810.pdf[HLW Semi HLW-YHX190 OTP micro Datasheet in Chinese (noted: for power-on and reset control)] -* https://files.pine64.org/doc/datasheet/PineBudsPro/TTP233D-SB6_V1.0_EN.pdf[Tontek TTP-233D one key touch pad detect IC Datasheet] - diff --git a/content/documentation/PineBuds_Pro/Further_information/Datasheets.md b/content/documentation/PineBuds_Pro/Further_information/Datasheets.md new file mode 100644 index 00000000..19cb586c --- /dev/null +++ b/content/documentation/PineBuds_Pro/Further_information/Datasheets.md @@ -0,0 +1,27 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "PineBuds_Pro/Further_information" + identifier: "PineBuds_Pro/Further_information/Datasheets" + weight: 1 +--- + +BES 2300YP SoC information: + +* [BES 2300-YP Datasheet V1.0](https://files.pine64.org/doc/datasheet/PineBudsPro/BES2300-YP_Datasheet_v1.0.pdf) + +Charging case: + +* [ThinkPlus Semi SY8821 Datasheet in Chinese](https://files.pine64.org/doc/datasheet/PineBudsPro/SY8821_SPEC_V1_2_2.pdf) +* [WCH Tech CH342DS USB to Dual Serial ports chip Datasheet](https://files.pine64.org/doc/datasheet/PineBudsPro/CH342DS1.PDF) +* [COPO CP2021 2.5W Qi Wire Power Receiver Datasheet (Unpopulated)](https://files.pine64.org/doc/datasheet/PineBudsPro/COPO%20CP2021%202.5W%20Qi%20Wire%20Power%20Receiver.pdf) + +EarBuds: + +* [ChiPower Tech CE3156 Single Cell Charger Datasheet](https://files.pine64.org/doc/datasheet/PineBudsPro/CE3156-EN-01.pdf) +* [LowPower Semi LP3992 LDO Regulator Datasheet](https://files.pine64.org/doc/datasheet/PineBudsPro/LP3992-33B5F.pdf) +* [HLW Semi HLW-YHX190 OTP micro Datasheet in Chinese (noted: for power-on and reset control)](https://files.pine64.org/doc/datasheet/PineBudsPro/HLW-YHX190_20190810.pdf) +* [Tontek TTP-233D one key touch pad detect IC Datasheet](https://files.pine64.org/doc/datasheet/PineBudsPro/TTP233D-SB6_V1.0_EN.pdf) diff --git a/content/documentation/PineBuds_Pro/Further_information/Schematics_and_Certifications.adoc b/content/documentation/PineBuds_Pro/Further_information/Schematics_and_Certifications.adoc deleted file mode 100644 index b56ff689..00000000 --- a/content/documentation/PineBuds_Pro/Further_information/Schematics_and_Certifications.adoc +++ /dev/null @@ -1,27 +0,0 @@ ---- -title: "Schematics and Certifications" -draft: false -menu: - docs: - title: - parent: "PineBuds_Pro/Further_information" - identifier: "PineBuds_Pro/Further_information/Schematics_and_Certifications" - weight: 2 ---- - -Documents: - -* https://files.pine64.org/doc/PineBudsPro/PineBuds%20Pro%20User%20manual-20220920-8pages-20221116.pdf[PineBuds Pro User Manual] - -Schematics: - -* https://files.pine64.org/doc/PineBudsPro/PineBuds%20Pro%20mainboard%20schematic-20220817.pdf[PineBuds Pro Earbuds Schematic 20220817] -* https://files.pine64.org/doc/PineBudsPro/PineBuds%20Pro%20charging%20cradle%20schematic-20220915.pdf[PineBuds Pro Charging Case Schematic 20220915] - -Certifications: - -* https://files.pine64.org/doc/cert/PineBuds%20Pro%20CE%20EMC%20Certificate-LCSA090522058E.pdf[PineBuds Pro CE EMC Certificate] -* https://files.pine64.org/doc/cert/PineBuds%20Pro%20CE%20RED%20Certificate-LCSA090522057E.pdf[PineBuds Pro CE RED Certificate] -* https://files.pine64.org/doc/cert/PineBuds%20Pro%20FCC%20SDOC%20Certificate-LCSA090522056E.pdf[PineBuds Pro FCC Certificate] -* https://files.pine64.org/doc/cert/PineBuds%20Pro%20ROHS%20Report-LCSA090522054R.pdf[PineBuds Pro ROHS Report] - diff --git a/content/documentation/PineBuds_Pro/Further_information/Schematics_and_Certifications.md b/content/documentation/PineBuds_Pro/Further_information/Schematics_and_Certifications.md new file mode 100644 index 00000000..aed71fdd --- /dev/null +++ b/content/documentation/PineBuds_Pro/Further_information/Schematics_and_Certifications.md @@ -0,0 +1,26 @@ +--- +title: "Schematics and Certifications" +draft: false +menu: + docs: + title: + parent: "PineBuds_Pro/Further_information" + identifier: "PineBuds_Pro/Further_information/Schematics_and_Certifications" + weight: 2 +--- + +Documents: + +* [PineBuds Pro User Manual](https://files.pine64.org/doc/PineBudsPro/PineBuds%20Pro%20User%20manual-20220920-8pages-20221116.pdf) + +Schematics: + +* [PineBuds Pro Earbuds Schematic 20220817](https://files.pine64.org/doc/PineBudsPro/PineBuds%20Pro%20mainboard%20schematic-20220817.pdf) +* [PineBuds Pro Charging Case Schematic 20220915](https://files.pine64.org/doc/PineBudsPro/PineBuds%20Pro%20charging%20cradle%20schematic-20220915.pdf) + +Certifications: + +* [PineBuds Pro CE EMC Certificate](https://files.pine64.org/doc/cert/PineBuds%20Pro%20CE%20EMC%20Certificate-LCSA090522058E.pdf) +* [PineBuds Pro CE RED Certificate](https://files.pine64.org/doc/cert/PineBuds%20Pro%20CE%20RED%20Certificate-LCSA090522057E.pdf) +* [PineBuds Pro FCC Certificate](https://files.pine64.org/doc/cert/PineBuds%20Pro%20FCC%20SDOC%20Certificate-LCSA090522056E.pdf) +* [PineBuds Pro ROHS Report](https://files.pine64.org/doc/cert/PineBuds%20Pro%20ROHS%20Report-LCSA090522054R.pdf) diff --git a/content/documentation/PineCone/Further_information/Datasheets.adoc b/content/documentation/PineCone/Further_information/Datasheets.adoc deleted file mode 100644 index 689018ac..00000000 --- a/content/documentation/PineCone/Further_information/Datasheets.adoc +++ /dev/null @@ -1,20 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "PineCone/Further_information" - identifier: "PineCone/Further_information/Datasheets" - weight: ---- - -Bouffalo BL-602 SoC information: - -* https://github.com/bouffalolab/bl_docs[Bouffalo Lab's official bl_docs repository]: should always contain the latest SoC documentation available, in PDF, HTML, and reStructuredText source forms. -* https://github.com/pine64/bl602-docs/tree/main/mirrored[PINE64's bl602-docs repository]: contains an archive of all historical datasheets and reference manual PDFs but may lag behind Bouffalo's official repository. If you notice that it is, please submit a pull request! - -USB/Serial adapter: - -* https://cdn.sparkfun.com/datasheets/Dev/Arduino/Other/CH340DS1.PDF[CH340 serial converter] - diff --git a/content/documentation/PineCone/Further_information/Datasheets.md b/content/documentation/PineCone/Further_information/Datasheets.md new file mode 100644 index 00000000..04ea7072 --- /dev/null +++ b/content/documentation/PineCone/Further_information/Datasheets.md @@ -0,0 +1,19 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "PineCone/Further_information" + identifier: "PineCone/Further_information/Datasheets" + weight: +--- + +Bouffalo BL-602 SoC information: + +* [Bouffalo Lab’s official bl_docs repository](https://github.com/bouffalolab/bl_docs): should always contain the latest SoC documentation available, in PDF, HTML, and reStructuredText source forms. +* [PINE64’s bl602-docs repository](https://github.com/pine64/bl602-docs/tree/main/mirrored): contains an archive of all historical datasheets and reference manual PDFs but may lag behind Bouffalo’s official repository. If you notice that it is, please submit a pull request! + +USB/Serial adapter: + +* [CH340 serial converter](https://cdn.sparkfun.com/datasheets/Dev/Arduino/Other/CH340DS1.PDF) diff --git a/content/documentation/PineCone/Further_information/Pine64_USB_JTAG_Adapter_information_and_schematics.adoc b/content/documentation/PineCone/Further_information/Pine64_USB_JTAG_Adapter_information_and_schematics.adoc deleted file mode 100644 index 21aaa56d..00000000 --- a/content/documentation/PineCone/Further_information/Pine64_USB_JTAG_Adapter_information_and_schematics.adoc +++ /dev/null @@ -1,14 +0,0 @@ ---- -title: "Pine64 USB JTAG Adapter information and schematics" -draft: false -menu: - docs: - title: - parent: "PineCone/Further_information" - identifier: "PineCone/Further_information/Pine64_USB_JTAG_Adapter_information_and_schematics" - weight: ---- - -* https://files.pine64.org/doc/Pinenut/PINE64%20USB%20JTAG%20Adapter%20Schematic-20201215.pdf[PINE64 USB JTAG Adapter Schematic-20201215.pdf (pine64_ft232hl_board-2020-12-14)] -* https://wiki.pine64.org/wiki/File:PINE64_USB_JTAG_Adapter_Schematic_ver_1.0a-20210109.pdf[PINE64 USB JTAG Adapter schematic 20210109 1.0a] - diff --git a/content/documentation/PineCone/Further_information/Pine64_USB_JTAG_Adapter_information_and_schematics.md b/content/documentation/PineCone/Further_information/Pine64_USB_JTAG_Adapter_information_and_schematics.md new file mode 100644 index 00000000..13f8e651 --- /dev/null +++ b/content/documentation/PineCone/Further_information/Pine64_USB_JTAG_Adapter_information_and_schematics.md @@ -0,0 +1,13 @@ +--- +title: "Pine64 USB JTAG Adapter information and schematics" +draft: false +menu: + docs: + title: + parent: "PineCone/Further_information" + identifier: "PineCone/Further_information/Pine64_USB_JTAG_Adapter_information_and_schematics" + weight: +--- + +* [PINE64 USB JTAG Adapter Schematic-20201215.pdf (pine64_ft232hl_board-2020-12-14)](https://files.pine64.org/doc/Pinenut/PINE64%20USB%20JTAG%20Adapter%20Schematic-20201215.pdf) +* [PINE64 USB JTAG Adapter schematic 20210109 1.0a](https://wiki.pine64.org/wiki/File:PINE64_USB_JTAG_Adapter_Schematic_ver_1.0a-20210109.pdf) diff --git a/content/documentation/PineCone/Further_information/PineCone_BL602_EVB_information_and_schematics.adoc b/content/documentation/PineCone/Further_information/PineCone_BL602_EVB_information_and_schematics.md similarity index 61% rename from content/documentation/PineCone/Further_information/PineCone_BL602_EVB_information_and_schematics.adoc rename to content/documentation/PineCone/Further_information/PineCone_BL602_EVB_information_and_schematics.md index 6a3a500c..0358c4bd 100644 --- a/content/documentation/PineCone/Further_information/PineCone_BL602_EVB_information_and_schematics.adoc +++ b/content/documentation/PineCone/Further_information/PineCone_BL602_EVB_information_and_schematics.md @@ -9,15 +9,14 @@ menu: weight: --- -image:/documentation/images/PADI-II_EVB.png[width=120] +![width=120](/documentation/images/PADI-II_EVB.png) The approximate dimensions are 26mm x 43mm. -Schematics: https://files.pine64.org/doc/Pinenut/Pine64%20BL602%20EVB%20Schematic%20ver%201.1.pdf[PineCone BL602 EVB schematic ver 1.1] +Schematics: [PineCone BL602 EVB schematic ver 1.1](https://files.pine64.org/doc/Pinenut/Pine64%20BL602%20EVB%20Schematic%20ver%201.1.pdf) -Note: In the PineCone revision 1.1 ("BL62B_EVB V1.1" silkscreened on back of board), CC1 and CC2 share one 5.1KΩ resistor. This means the board will fail to power when you use an e-marked USB-C cable like the one that comes with Apple chargers. See https://medium.com/@leung.benson/how-to-design-a-proper-usb-c-power-sink-hint-not-the-way-raspberry-pi-4-did-it-f470d7a5910[this article] for details of why this happens. The next schematic design will give each line its own 5.1KΩ resistor as per the USB-C specification. +Note: In the PineCone revision 1.1 ("BL62B_EVB V1.1" silkscreened on back of board), CC1 and CC2 share one 5.1KΩ resistor. This means the board will fail to power when you use an e-marked USB-C cable like the one that comes with Apple chargers. See [this article](https://medium.com/@leung.benson/how-to-design-a-proper-usb-c-power-sink-hint-not-the-way-raspberry-pi-4-did-it-f470d7a5910) for details of why this happens. The next schematic design will give each line its own 5.1KΩ resistor as per the USB-C specification. The board uses a CH340 Serial/USB adapter. This chip is commonly used in Arduino-class development boards. It is a full speed (12Mbps) USB interface and has vendor ID 0x1a86 with product ID 0x7523. The GPIO pins (11, 12, 14, 17) plus the nearby RESET, POWER, and GND pins are all located on one side of the board, on J1 to provide JTAG connection. - diff --git a/content/documentation/PineCone/Further_information/Pinenut-01S_Module_information_and_schematics.adoc b/content/documentation/PineCone/Further_information/Pinenut-01S_Module_information_and_schematics.adoc deleted file mode 100644 index a7eef0fe..00000000 --- a/content/documentation/PineCone/Further_information/Pinenut-01S_Module_information_and_schematics.adoc +++ /dev/null @@ -1,26 +0,0 @@ ---- -title: "Pinenut-01S Module information and schematics" -draft: false -menu: - docs: - title: - parent: "PineCone/Further_information" - identifier: "PineCone/Further_information/Pinenut-01S_Module_information_and_schematics" - weight: ---- - -image:/documentation/images/Pinenut-01S_PCB-Front.png[width=200] -image:/documentation/images/Pinenut-01S_PCB-Back.png[width=200] - -Schematics and GPIO definitions: - -* https://files.pine64.org/doc/Pinenut/Pinenut-01S%20V1.01%20SCH.pdf[Pinenut-01S schematic ver 1.01] -* https://wiki.pine64.org/images/6/6b/PineNut-01S_v1.01_KiCad.zip[PineNut-01S KiCad schematic ver 1.01] -* https://files.pine64.org/doc/Pinenut/NUT-01S%20GPIO%20Definition%20ver%201.0.pdf[Pinenut-01S GPIO Definition ver 1.0] -* https://files.pine64.org/doc/Pinenut/USB%20Adapter%20for%20Pinenut-01S%20Schematic%20V1.0.pdf[USB Programmer adapter for Pinenut-01S schematic ver 1.0] - -The default firmware runs the UART at 2000000 bps. It will accept input whilst regularly outputting: - - proc_hellow_entry: RISC-V rv32imafc - cur key status:1 - diff --git a/content/documentation/PineCone/Further_information/Pinenut-01S_Module_information_and_schematics.md b/content/documentation/PineCone/Further_information/Pinenut-01S_Module_information_and_schematics.md new file mode 100644 index 00000000..180936f3 --- /dev/null +++ b/content/documentation/PineCone/Further_information/Pinenut-01S_Module_information_and_schematics.md @@ -0,0 +1,25 @@ +--- +title: "Pinenut-01S Module information and schematics" +draft: false +menu: + docs: + title: + parent: "PineCone/Further_information" + identifier: "PineCone/Further_information/Pinenut-01S_Module_information_and_schematics" + weight: +--- + +![width=200](/documentation/images/Pinenut-01S_PCB-Front.png) +![width=200](/documentation/images/Pinenut-01S_PCB-Back.png) + +Schematics and GPIO definitions: + +* [Pinenut-01S schematic ver 1.01](https://files.pine64.org/doc/Pinenut/Pinenut-01S%20V1.01%20SCH.pdf) +* [PineNut-01S KiCad schematic ver 1.01](https://wiki.pine64.org/images/6/6b/PineNut-01S_v1.01_KiCad.zip) +* [Pinenut-01S GPIO Definition ver 1.0](https://files.pine64.org/doc/Pinenut/NUT-01S%20GPIO%20Definition%20ver%201.0.pdf) +* [USB Programmer adapter for Pinenut-01S schematic ver 1.0](https://files.pine64.org/doc/Pinenut/USB%20Adapter%20for%20Pinenut-01S%20Schematic%20V1.0.pdf) + +The default firmware runs the UART at 2000000 bps. It will accept input whilst regularly outputting: + + proc_hellow_entry: RISC-V rv32imafc + cur key status:1 diff --git a/content/documentation/PineCube/Further_information/Datasheets.adoc b/content/documentation/PineCube/Further_information/Datasheets.adoc deleted file mode 100644 index 52cc9a4e..00000000 --- a/content/documentation/PineCube/Further_information/Datasheets.adoc +++ /dev/null @@ -1,32 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "PineCube/Further_information" - identifier: "PineCube/Further_information/Datasheets" - weight: 2 ---- - -Allwinner (Sochip) S3 SoC information: - -* https://files.pine64.org/doc/datasheet/pinecube/S3_Datasheet_V1.1-20180123.pdf[Sochip S3 SoC Data Sheet V1.1] - -X-Powers AXP209 PMU (Power Management Unit) information: - -* https://files.pine64.org/doc/datasheet/pinecube/AXP209_Datasheet_v1.0en.pdf[AXP209 PMIC datasheet] - -CMOS camera module information: - -* https://files.pine64.org/doc/datasheet/pinecube/CH-5A-DV-V2.0%20Specification.pdf[PineCube Camera Module Specification] -* https://files.pine64.org/doc/datasheet/pinephone/OV5640_datasheet.pdf[OV5640 5MP CMOS Image Sensor SoC datasheet] - -LCD touch screen panel information: - -Lithium battery information: - -WiFi/BT module information: - -* https://files.pine64.org/doc/datasheet/pinecube/rtl8189es.pdf[RTL8189ES specification] - diff --git a/content/documentation/PineCube/Further_information/Datasheets.md b/content/documentation/PineCube/Further_information/Datasheets.md new file mode 100644 index 00000000..f92ebc2e --- /dev/null +++ b/content/documentation/PineCube/Further_information/Datasheets.md @@ -0,0 +1,31 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "PineCube/Further_information" + identifier: "PineCube/Further_information/Datasheets" + weight: 2 +--- + +Allwinner (Sochip) S3 SoC information: + +* [Sochip S3 SoC Data Sheet V1.1](https://files.pine64.org/doc/datasheet/pinecube/S3_Datasheet_V1.1-20180123.pdf) + +X-Powers AXP209 PMU (Power Management Unit) information: + +* [AXP209 PMIC datasheet](https://files.pine64.org/doc/datasheet/pinecube/AXP209_Datasheet_v1.0en.pdf) + +CMOS camera module information: + +* [PineCube Camera Module Specification](https://files.pine64.org/doc/datasheet/pinecube/CH-5A-DV-V2.0%20Specification.pdf) +* [OV5640 5MP CMOS Image Sensor SoC datasheet](https://files.pine64.org/doc/datasheet/pinephone/OV5640_datasheet.pdf) + +LCD touch screen panel information: + +Lithium battery information: + +WiFi/BT module information: + +* [RTL8189ES specification](https://files.pine64.org/doc/datasheet/pinecube/rtl8189es.pdf) diff --git a/content/documentation/PineCube/Further_information/Schematics_and_certifications.adoc b/content/documentation/PineCube/Further_information/Schematics_and_certifications.adoc deleted file mode 100644 index cc691f42..00000000 --- a/content/documentation/PineCube/Further_information/Schematics_and_certifications.adoc +++ /dev/null @@ -1,25 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "PineCube/Further_information" - identifier: "PineCube/Further_information/Schematics_and_certifications" - weight: 3 ---- - -PineCube mainboard schematic: - -* https://files.pine64.org/doc/PineCube/PineCube%20MainBoard%20Schematic%20ver%201.0-20200727.pdf[PineCube mainboard Released Schematic ver 1.0] - -PineCube faceboard schematic: - -* https://files.pine64.org/doc/PineCube/PineCube%20FaceBoard%20Schematic%20ver%201.0-20200727.pdf[PineCube faceboard Released Schematic ver 1.0] - -PineCube certifications: - -* https://files.pine64.org/doc/cert/PineCube-FCC-SDOC%20certification%20S20072502302001.pdf[PineCube FCC Certificate] -* https://files.pine64.org/doc/cert/PineCube-CE-EMC%20certification%20S20072502301001.pdf[PineCube CE RED Certificate] -* https://files.pine64.org/doc/cert/PineCube-ROHS%20Test%20Report.pdf[PineCube ROHS Test Report] - diff --git a/content/documentation/PineCube/Further_information/Schematics_and_certifications.md b/content/documentation/PineCube/Further_information/Schematics_and_certifications.md new file mode 100644 index 00000000..d6c868ef --- /dev/null +++ b/content/documentation/PineCube/Further_information/Schematics_and_certifications.md @@ -0,0 +1,24 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "PineCube/Further_information" + identifier: "PineCube/Further_information/Schematics_and_certifications" + weight: 3 +--- + +PineCube mainboard schematic: + +* [PineCube mainboard Released Schematic ver 1.0](https://files.pine64.org/doc/PineCube/PineCube%20MainBoard%20Schematic%20ver%201.0-20200727.pdf) + +PineCube faceboard schematic: + +* [PineCube faceboard Released Schematic ver 1.0](https://files.pine64.org/doc/PineCube/PineCube%20FaceBoard%20Schematic%20ver%201.0-20200727.pdf) + +PineCube certifications: + +* [PineCube FCC Certificate](https://files.pine64.org/doc/cert/PineCube-FCC-SDOC%20certification%20S20072502302001.pdf) +* [PineCube CE RED Certificate](https://files.pine64.org/doc/cert/PineCube-CE-EMC%20certification%20S20072502301001.pdf) +* [PineCube ROHS Test Report](https://files.pine64.org/doc/cert/PineCube-ROHS%20Test%20Report.pdf) diff --git a/content/documentation/PineCube/Further_information/Specifications.adoc b/content/documentation/PineCube/Further_information/Specifications.adoc deleted file mode 100644 index 25358273..00000000 --- a/content/documentation/PineCube/Further_information/Specifications.adoc +++ /dev/null @@ -1,46 +0,0 @@ ---- -title: "Specifications" -draft: false -menu: - docs: - title: - parent: "PineCube/Further_information" - identifier: "PineCube/Further_information/Specifications" - weight: 1 ---- - -* *Dimensions:* 55mm x 51mm x 51.5mm -* *Weight:* 55g -* *Storage:* -** MicroSD slot, bootable -** 128Mb SPI Nor Flash, bootable -* *Cameras:* OV5640, 5Mpx -* *CPU:* Allwinner(Sochip) ARM Cortex-A7 MPCore, 800MHz -* *RAM:* 128MB DDR3 -* *I/O:* -** 10/100Mbps Ethernet with passive PoE (_4-18V!_) -** USB 2.0 A host -** 26 pins GPIO port -*** 2x 3.3V Ouptut -*** 2x 5V Output -*** 1x I2C -*** 2x UART (3.3V) -*** 2x PWM -*** 1x SPI -*** 1x eMMC/SDIO/SD (8-bit) -*** 6x Interrupts -*** *Note: Interfaces are multiplexed, so they can't be all used at same time* -** Internal microphone -* *Network:* -** WiFi -* *Screen:* optional 4.5" RGB LCD screen ( RB043H40T03A-IPS or DFC-XS4300240 V01 ) -* *Misc. features:* -** Volume and home buttons -** Speakers and Microphone -** IR LEDs for night vision -** Passive infrared sensor -* *Power DC in:* -** 5V 1A from MicroUSB Port or GPIO port -** 4V-18V from Ethernet passive PoE -* *Battery:* optional 950-1600mAh model: 903048 Lithium Polymer Ion Battery Pack, can be purchase at https://www.amazon.com/AKZYTUE-1200mAh-Battery-Rechargeable-Connector/dp/B07TWHHCNK/[Amazon.com] - diff --git a/content/documentation/PineCube/Further_information/Specifications.md b/content/documentation/PineCube/Further_information/Specifications.md new file mode 100644 index 00000000..90939d12 --- /dev/null +++ b/content/documentation/PineCube/Further_information/Specifications.md @@ -0,0 +1,45 @@ +--- +title: "Specifications" +draft: false +menu: + docs: + title: + parent: "PineCube/Further_information" + identifier: "PineCube/Further_information/Specifications" + weight: 1 +--- + +* **Dimensions:** 55mm x 51mm x 51.5mm +* **Weight:** 55g +* **Storage:** + * MicroSD slot, bootable + * 128Mb SPI Nor Flash, bootable +* **Cameras:** OV5640, 5Mpx +* **CPU:** Allwinner(Sochip) ARM Cortex-A7 MPCore, 800MHz +* **RAM:** 128MB DDR3 +* **I/O:** + * 10/100Mbps Ethernet with passive PoE (_4-18V!_) + * USB 2.0 A host + * 26 pins GPIO port + * 2x 3.3V Ouptut + * 2x 5V Output + * 1x I2C + * 2x UART (3.3V) + * 2x PWM + * 1x SPI + * 1x eMMC/SDIO/SD (8-bit) + * 6x Interrupts + * **Note: Interfaces are multiplexed, so they can’t be all used at same time** + * Internal microphone +* **Network:** + * WiFi +* **Screen:** optional 4.5" RGB LCD screen ( RB043H40T03A-IPS or DFC-XS4300240 V01 ) +* **Misc. features:** + * Volume and home buttons + * Speakers and Microphone + * IR LEDs for night vision + * Passive infrared sensor +* **Power DC in:** + * 5V 1A from MicroUSB Port or GPIO port + * 4V-18V from Ethernet passive PoE +* **Battery:** optional 950-1600mAh model: 903048 Lithium Polymer Ion Battery Pack, can be purchase at [Amazon.com](https://www.amazon.com/AKZYTUE-1200mAh-Battery-Rechargeable-Connector/dp/B07TWHHCNK/) diff --git a/content/documentation/PineNote/Further_information/Datasheets.adoc b/content/documentation/PineNote/Further_information/Datasheets.adoc deleted file mode 100644 index 7c9f2015..00000000 --- a/content/documentation/PineNote/Further_information/Datasheets.adoc +++ /dev/null @@ -1,49 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "PineNote/Further_information" - identifier: "PineNote/Further_information/Datasheets" - weight: 4 ---- - -Rockchip RK3566 SoC information: - -* https://files.pine64.org/doc/quartz64/Rockchip%20RK3566%20Datasheet%20V1.0-20201210.pdf[Rockchip RK3566 ver 1.0 datasheet, release permission from Rockchip] - -Rockchip RK817 PMU (Power Management Unit) Information: - -* https://www.rockchip.fr/RK817%20datasheet%20V1.01.pdf[Rockchip RK817 version 1.01 datasheet] - -LPDDR4 (200 Balls) SDRAM: - -* --- - -eMMC information: - -* https://en.biwin.com.cn/product/detail/6[Biwin 128GB eMMC model: BWCTASC41P128G] - -E-ink Panel information: - -* https://files.pine64.org/doc/quartz64/Eink%20P-511-828-V1_ED103TC2%20Formal%20Spec%20V1.0_20190514.pdf[E-Ink 10.3" 1872x1404 ED103TC2 Glass Panel Specification] -* https://files.pine64.org/doc/datasheet/PineNote/TI%20PMU-TPS651851.pdf[TPS65185x PMIC for E-Ink Enabled Electronic Paper Display Datasheet] - -Touch Screen information: - -* https://files.pine64.org/doc/datasheet/PineNote/CYTMA448_Summary_RevC_5-26-16.pdf[Cypress CYTMA448 multi-Point Capacitive Touch Controller Datasheet] -* Wacom Pen Digitizer Unit Model: SUDE-10S15MI-01X for 10.3" Display Module - -WiFi/BT module information: - -* https://files.pine64.org/doc/datasheet/rockpro64/AW-CM256SM_DS_DF_V1.9_STD.pdf[Azurewave CM256SM 11AC WiFi + Bluetooth5.0 Datasheet]] - -G Sensor information: - -* http://www.silan.com.cn/en/product/details/47.html#app01[Silan SC7A20 3-Axis MEMS Accelerometer] - -Audio Amplifier information: - -* https://files.pine64.org/doc/datasheet/PineNote/Awinic%20AW87318%20Class-K%20Audio%20Amp%20Datasheet.pdf[Awinic AW87318 Class-K Audio Amp Datasheet] - diff --git a/content/documentation/PineNote/Further_information/Datasheets.md b/content/documentation/PineNote/Further_information/Datasheets.md new file mode 100644 index 00000000..31d7ecdf --- /dev/null +++ b/content/documentation/PineNote/Further_information/Datasheets.md @@ -0,0 +1,48 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "PineNote/Further_information" + identifier: "PineNote/Further_information/Datasheets" + weight: 4 +--- + +Rockchip RK3566 SoC information: + +* [Rockchip RK3566 ver 1.0 datasheet, release permission from Rockchip](https://files.pine64.org/doc/quartz64/Rockchip%20RK3566%20Datasheet%20V1.0-20201210.pdf) + +Rockchip RK817 PMU (Power Management Unit) Information: + +* [Rockchip RK817 version 1.01 datasheet](https://www.rockchip.fr/RK817%20datasheet%20V1.01.pdf) + +LPDDR4 (200 Balls) SDRAM: + +* --- + +eMMC information: + +* [Biwin 128GB eMMC model: BWCTASC41P128G](https://en.biwin.com.cn/product/detail/6) + +E-ink Panel information: + +* [E-Ink 10.3" 1872x1404 ED103TC2 Glass Panel Specification](https://files.pine64.org/doc/quartz64/Eink%20P-511-828-V1_ED103TC2%20Formal%20Spec%20V1.0_20190514.pdf) +* [TPS65185x PMIC for E-Ink Enabled Electronic Paper Display Datasheet](https://files.pine64.org/doc/datasheet/PineNote/TI%20PMU-TPS651851.pdf) + +Touch Screen information: + +* [Cypress CYTMA448 multi-Point Capacitive Touch Controller Datasheet](https://files.pine64.org/doc/datasheet/PineNote/CYTMA448_Summary_RevC_5-26-16.pdf) +* Wacom Pen Digitizer Unit Model: SUDE-10S15MI-01X for 10.3" Display Module + +WiFi/BT module information: + +* [Azurewave CM256SM 11AC WiFi + Bluetooth5.0 Datasheet](https://files.pine64.org/doc/datasheet/rockpro64/AW-CM256SM_DS_DF_V1.9_STD.pdf)] + +G Sensor information: + +* [Silan SC7A20 3-Axis MEMS Accelerometer](http://www.silan.com.cn/en/product/details/47.html#app01) + +Audio Amplifier information: + +* [Awinic AW87318 Class-K Audio Amp Datasheet](https://files.pine64.org/doc/datasheet/PineNote/Awinic%20AW87318%20Class-K%20Audio%20Amp%20Datasheet.pdf) diff --git a/content/documentation/PineNote/Further_information/Schematics_and_certifications.adoc b/content/documentation/PineNote/Further_information/Schematics_and_certifications.adoc deleted file mode 100644 index b566f2df..00000000 --- a/content/documentation/PineNote/Further_information/Schematics_and_certifications.adoc +++ /dev/null @@ -1,31 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "PineNote/Further_information" - identifier: "PineNote/Further_information/Schematics_and_certifications" - weight: 3 ---- - -== PineNote Developer kit version - -Version v1.2 is the PineNote production version that was sold through the Pines64 store - -* https://files.pine64.org/doc/PineNote/PINENOTE_MAIN-V1R2%20-%20Schematic-20210824.pdf[PineNote Mainboard Schematic ver 1.2 20210824 PDF file] -* https://files.pine64.org/doc/PineNote/PINENOTE_USB-C-Board-V1.0-sch.pdf[PineNote USB-C Daughter Board Schematic ver 1.0 PDF file] -* https://files.pine64.org/doc/PineNote/PineNote_USB-C_Console_UART_breakout_board_schematic_v1.0_20210903.pdf[PineNote USB-C Console UART Breakout Board Schematic ver 1.0 PDF file] Note: When building USB-C console breakout board, please be aware 10k CC pin pull-up is too weak to pull CC to logically high level. Replacing it to lower resistance, such as 1k is recommended. - -The v1.1 is early release schematic just for reference only and used by developers who received the prototype. - -* https://files.pine64.org/doc/PineNote/PINENOTE_MAIN-V1R1%20-%20Schematic-20210726.pdf[PineNote early released Schematic ver 1.1 20210726 PDF file] -* https://files.pine64.org/doc/PineNote/PINENOTE_MAIN-V1R1-REF-TOP-20210726.pdf[PineNote early released ver 1.1 20210726 PCB Connector placement PDF file] - -Certifications: - -* https://files.pine64.org/doc/cert/PineNote%20FCC15C%20Certificate%20DTS-TC561262.pdf[PineNote FCC-15C Certificate] -* https://files.pine64.org/doc/cert/PineNote%20FCC15E%20Certificate%20NII-TC973072.pdf[PineNote FCC-15E Certificate] -* https://files.pine64.org/doc/cert/PineNote%20CE%20RED%20Certicate%20ET-21090682EC.pdf[PineNote CE RED Certificate] -* https://files.pine64.org/doc/cert/PineNote%20RoHS%20Certificate%20ET-210900082C.pdf[PineNote ROHS Certificate] - diff --git a/content/documentation/PineNote/Further_information/Schematics_and_certifications.md b/content/documentation/PineNote/Further_information/Schematics_and_certifications.md new file mode 100644 index 00000000..80fb1542 --- /dev/null +++ b/content/documentation/PineNote/Further_information/Schematics_and_certifications.md @@ -0,0 +1,30 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "PineNote/Further_information" + identifier: "PineNote/Further_information/Schematics_and_certifications" + weight: 3 +--- + +## PineNote Developer kit version + +Version v1.2 is the PineNote production version that was sold through the Pines64 store + +* [PineNote Mainboard Schematic ver 1.2 20210824 PDF file](https://files.pine64.org/doc/PineNote/PINENOTE_MAIN-V1R2%20-%20Schematic-20210824.pdf) +* [PineNote USB-C Daughter Board Schematic ver 1.0 PDF file](https://files.pine64.org/doc/PineNote/PINENOTE_USB-C-Board-V1.0-sch.pdf) +* [PineNote USB-C Console UART Breakout Board Schematic ver 1.0 PDF file](https://files.pine64.org/doc/PineNote/PineNote_USB-C_Console_UART_breakout_board_schematic_v1.0_20210903.pdf) Note: When building USB-C console breakout board, please be aware 10k CC pin pull-up is too weak to pull CC to logically high level. Replacing it to lower resistance, such as 1k is recommended. + +The v1.1 is early release schematic just for reference only and used by developers who received the prototype. + +* [PineNote early released Schematic ver 1.1 20210726 PDF file](https://files.pine64.org/doc/PineNote/PINENOTE_MAIN-V1R1%20-%20Schematic-20210726.pdf) +* [PineNote early released ver 1.1 20210726 PCB Connector placement PDF file](https://files.pine64.org/doc/PineNote/PINENOTE_MAIN-V1R1-REF-TOP-20210726.pdf) + +Certifications: + +* [PineNote FCC-15C Certificate](https://files.pine64.org/doc/cert/PineNote%20FCC15C%20Certificate%20DTS-TC561262.pdf) +* [PineNote FCC-15E Certificate](https://files.pine64.org/doc/cert/PineNote%20FCC15E%20Certificate%20NII-TC973072.pdf) +* [PineNote CE RED Certificate](https://files.pine64.org/doc/cert/PineNote%20CE%20RED%20Certicate%20ET-21090682EC.pdf) +* [PineNote ROHS Certificate](https://files.pine64.org/doc/cert/PineNote%20RoHS%20Certificate%20ET-210900082C.pdf) diff --git a/content/documentation/PinePhone/Further_information/Datasheets.adoc b/content/documentation/PinePhone/Further_information/Datasheets.adoc deleted file mode 100644 index 80f21ec7..00000000 --- a/content/documentation/PinePhone/Further_information/Datasheets.adoc +++ /dev/null @@ -1,80 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "PinePhone/Further_information" - identifier: "PinePhone/Further_information/Datasheets" - weight: ---- - -Allwinner A64 SoC information: - -* https://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf[Allwinner A64 SoC brief introduction] -* https://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf[Allwinner A64 SoC Data Sheet V1.1 (Official Released Version)] -* https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf[Allwinner A64 SoC User Manual V1.0 (Official Release Version)] - -X-Powers AXP803 PMIC (Power Management IC) information: - -* https://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf[AXP803 PMIC datasheet] - -LPDDR3 (178 Balls) SDRAM: - -* https://files.pine64.org/doc/datasheet/pinephone/ATL3A1632H12A_mobile_lpddr3_11x11.5_v1.0_1600.pdf[Artmem LPDDR3 datasheet] - -eMMC information: - -* https://files.pine64.org/doc/datasheet/pinephone/Kimtigo_fbga153_16_32_64_eMMC_datasheet_v1.3.pdf[Kimtigo eMMC datasheet] - -CMOS camera module information: - -* https://files.pine64.org/doc/datasheet/pinephone/QZ01-rear-2019-0717(HW)%20Model.pdf[PinePhone 5M Pixel Real CMOS Image Sensor Module] -* https://files.pine64.org/doc/datasheet/pinephone/OV5640_datasheet.pdf[OV5640 5MP CMOS Image Sensor SoC for Rear Module datasheet] -* https://usermanual.wiki/Document/OV5640FirmwareUserGuideV10.952852672.pdf[OV5640 Embedded Firmware User Guide – VCM AF Module] -* https://files.pine64.org/doc/datasheet/pinephone/QZ01-front-2019-0717(HW)%20Model.pdf[PinePhone 2M Pixel Front CMOS Image Sensor Module] -* https://files.pine64.org/doc/datasheet/pinephone/GC2145%20CSP%20DataSheet%20release%20V1.0_20131201.pdf[GC2145 2MP CMOS Image Sensor SoC for Front Module datasheet] - -LCD touch screen panel information: - -* https://files.pine64.org/doc/datasheet/pinephone/PinePhone%20LCD-QZ01.pdf[5.99" 1440x720 LCD IPS Panel specification] -* https://files.pine64.org/doc/datasheet/pinephone/ST7703_DS_v01_20160128.pdf[ST7703 LCD Controller datasheet] -* https://files.pine64.org/doc/datasheet/pinephone/GT917S-Datasheet.pdf[GOODiX GT917S Capacitive Touch Controller datasheet] - -Lithium battery information: - -* https://files.pine64.org/doc/datasheet/pinephone/PinePhone%20QZ01%20Battery%20Specification.pdf[PinePhone Lithium Battery specification] -* https://files.pine64.org/doc/datasheet/pinephone/PinePhone%20QZ01%20Battery%20ZCV%20Curve%20Chart.xlsx[PinePhone Lithium Battery ZCV curve chart] -* https://cad.onshape.com/documents/5194d6303f021e6f300b70a0/w/7b63ac4c32ed63dfd78c7840/e/5d43c0ce5b665bae10082a08[PinePhone Lithium Battery 3D onshape drawing] - -WiFi/BT module information: - -* https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf[RTL8723BS/RTL8723CS specification] - -LTE module information: - -* https://wiki.pine64.org/wiki/File:Quectel_EG25-G_LTE_Standard_Specification_V1.3.pdf -* https://wiki.pine64.org/wiki/File:Quectel_EG25-G_Hardware_Design_V1.4.pdf -* https://wiki.pine64.org/wiki/File:Quectel_EC2x&EG9x&EG2x-G&EM05_Series_AT_Commands_Manual_V2.0.pdf -* https://wiki.pine64.org/wiki/File:Quectel_EC2xEG25-GEG9xEM05_FILE_AT_Commands_Manual_V1.0.pdf -* https://wiki.pine64.org/wiki/File:Quectel_EC2x&EG9x&EG2x-G&EM05_Series_GNSS_Application_Note_V1.3.pdf - -Sensors: - -* https://www.st.com/en/mems-and-sensors/lis3mdl.html[ST LIS3MDL 3-axis Magnetometer Datasheet] -* https://www.invensense.com/products/motion-tracking/6-axis/mpu-6050/[InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS datasheet] -* https://www.sensortek.com.tw/en/product/Proximity_Sensor_with_ALS.html[SensorTek STK3335 Ambient Light Sensor and Proximity Sensor] - -Digital video to USB-C bridge: - -* https://www.analogix.com/en/system/files/AA-002281-PB-6-ANX7688_Product_Brief.pdf[ANX7688 product brief] - -Case information: - -* https://files.pine64.org/doc/datasheet/pinephone/PinePhone%20Exploded%20Diagram%20ver%201.0.pdf[PinePhone case exploded diagram] -* https://files.pine64.org/doc/datasheet/pinephone/PinePhone%20Back%20Cover.stp[PinePhone back cover 3D file] - -Other components: - -* See the link:/documentation/PinePhone/Further_information/Components[Component List] - diff --git a/content/documentation/PinePhone/Further_information/Datasheets.md b/content/documentation/PinePhone/Further_information/Datasheets.md new file mode 100644 index 00000000..4e6e9860 --- /dev/null +++ b/content/documentation/PinePhone/Further_information/Datasheets.md @@ -0,0 +1,79 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "PinePhone/Further_information" + identifier: "PinePhone/Further_information/Datasheets" + weight: +--- + +Allwinner A64 SoC information: + +* [Allwinner A64 SoC brief introduction](https://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf) +* [Allwinner A64 SoC Data Sheet V1.1 (Official Released Version)](https://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf) +* [Allwinner A64 SoC User Manual V1.0 (Official Release Version)](https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf) + +X-Powers AXP803 PMIC (Power Management IC) information: + +* [AXP803 PMIC datasheet](https://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf) + +LPDDR3 (178 Balls) SDRAM: + +* [Artmem LPDDR3 datasheet](https://files.pine64.org/doc/datasheet/pinephone/ATL3A1632H12A_mobile_lpddr3_11x11.5_v1.0_1600.pdf) + +eMMC information: + +* [Kimtigo eMMC datasheet](https://files.pine64.org/doc/datasheet/pinephone/Kimtigo_fbga153_16_32_64_eMMC_datasheet_v1.3.pdf) + +CMOS camera module information: + +* [PinePhone 5M Pixel Real CMOS Image Sensor Module](https://files.pine64.org/doc/datasheet/pinephone/QZ01-rear-2019-0717(HW)%20Model.pdf) +* [OV5640 5MP CMOS Image Sensor SoC for Rear Module datasheet](https://files.pine64.org/doc/datasheet/pinephone/OV5640_datasheet.pdf) +* [OV5640 Embedded Firmware User Guide – VCM AF Module](https://usermanual.wiki/Document/OV5640FirmwareUserGuideV10.952852672.pdf) +* [PinePhone 2M Pixel Front CMOS Image Sensor Module](https://files.pine64.org/doc/datasheet/pinephone/QZ01-front-2019-0717(HW)%20Model.pdf) +* [GC2145 2MP CMOS Image Sensor SoC for Front Module datasheet](https://files.pine64.org/doc/datasheet/pinephone/GC2145%20CSP%20DataSheet%20release%20V1.0_20131201.pdf) + +LCD touch screen panel information: + +* [5.99" 1440x720 LCD IPS Panel specification](https://files.pine64.org/doc/datasheet/pinephone/PinePhone%20LCD-QZ01.pdf) +* [ST7703 LCD Controller datasheet](https://files.pine64.org/doc/datasheet/pinephone/ST7703_DS_v01_20160128.pdf) +* [GOODiX GT917S Capacitive Touch Controller datasheet](https://files.pine64.org/doc/datasheet/pinephone/GT917S-Datasheet.pdf) + +Lithium battery information: + +* [PinePhone Lithium Battery specification](https://files.pine64.org/doc/datasheet/pinephone/PinePhone%20QZ01%20Battery%20Specification.pdf) +* [PinePhone Lithium Battery ZCV curve chart](https://files.pine64.org/doc/datasheet/pinephone/PinePhone%20QZ01%20Battery%20ZCV%20Curve%20Chart.xlsx) +* [PinePhone Lithium Battery 3D onshape drawing](https://cad.onshape.com/documents/5194d6303f021e6f300b70a0/w/7b63ac4c32ed63dfd78c7840/e/5d43c0ce5b665bae10082a08) + +WiFi/BT module information: + +* [RTL8723BS/RTL8723CS specification](https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf) + +LTE module information: + +* https://wiki.pine64.org/wiki/File:Quectel_EG25-G_LTE_Standard_Specification_V1.3.pdf +* https://wiki.pine64.org/wiki/File:Quectel_EG25-G_Hardware_Design_V1.4.pdf +* https://wiki.pine64.org/wiki/File:Quectel_EC2x&EG9x&EG2x-G&EM05_Series_AT_Commands_Manual_V2.0.pdf +* https://wiki.pine64.org/wiki/File:Quectel_EC2xEG25-GEG9xEM05_FILE_AT_Commands_Manual_V1.0.pdf +* https://wiki.pine64.org/wiki/File:Quectel_EC2x&EG9x&EG2x-G&EM05_Series_GNSS_Application_Note_V1.3.pdf + +Sensors: + +* [ST LIS3MDL 3-axis Magnetometer Datasheet](https://www.st.com/en/mems-and-sensors/lis3mdl.html) +* [InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS datasheet](https://www.invensense.com/products/motion-tracking/6-axis/mpu-6050/) +* [SensorTek STK3335 Ambient Light Sensor and Proximity Sensor](https://www.sensortek.com.tw/en/product/Proximity_Sensor_with_ALS.html) + +Digital video to USB-C bridge: + +* [ANX7688 product brief](https://www.analogix.com/en/system/files/AA-002281-PB-6-ANX7688_Product_Brief.pdf) + +Case information: + +* [PinePhone case exploded diagram](https://files.pine64.org/doc/datasheet/pinephone/PinePhone%20Exploded%20Diagram%20ver%201.0.pdf) +* [PinePhone back cover 3D file](https://files.pine64.org/doc/datasheet/pinephone/PinePhone%20Back%20Cover.stp) + +Other components: + +* See the [Component List](/documentation/PinePhone/Further_information/Components) diff --git a/content/documentation/PinePhone/Further_information/Resources.adoc b/content/documentation/PinePhone/Further_information/Resources.adoc deleted file mode 100644 index 126a15d7..00000000 --- a/content/documentation/PinePhone/Further_information/Resources.adoc +++ /dev/null @@ -1,19 +0,0 @@ ---- -title: "Resources" -draft: false -menu: - docs: - title: - parent: "PinePhone/Further_information" - identifier: "PinePhone/Further_information/Resources" - weight: ---- - -The following resources have been made available by Ondřej Jirman, a developer for the Pinephone: - -* https://xnux.eu/howtos/pine64-pinephone-getting-started.html[Getting started with PinePhone Hardware] -* https://xnux.eu/devices/pine64-pinephone.html[State of development progress] -* https://xnux.eu/log/[Development log] -* https://xnux.eu/news.html[PinePhone Technical News and Update, also applies to other Allwinner devices including PINE A64 SBC] -* https://xnux.eu/contribute.html[Contributions to the kernel development] - diff --git a/content/documentation/PinePhone/Further_information/Resources.md b/content/documentation/PinePhone/Further_information/Resources.md new file mode 100644 index 00000000..2f9dae68 --- /dev/null +++ b/content/documentation/PinePhone/Further_information/Resources.md @@ -0,0 +1,18 @@ +--- +title: "Resources" +draft: false +menu: + docs: + title: + parent: "PinePhone/Further_information" + identifier: "PinePhone/Further_information/Resources" + weight: +--- + +The following resources have been made available by Ondřej Jirman, a developer for the Pinephone: + +* [Getting started with PinePhone Hardware](https://xnux.eu/howtos/pine64-pinephone-getting-started.html) +* [State of development progress](https://xnux.eu/devices/pine64-pinephone.html) +* [Development log](https://xnux.eu/log/) +* [PinePhone Technical News and Update, also applies to other Allwinner devices including PINE A64 SBC](https://xnux.eu/news.html) +* [Contributions to the kernel development](https://xnux.eu/contribute.html) diff --git a/content/documentation/PinePhone/Further_information/Schematics_and_certifications.adoc b/content/documentation/PinePhone/Further_information/Schematics_and_certifications.adoc deleted file mode 100644 index 37ebf8c4..00000000 --- a/content/documentation/PinePhone/Further_information/Schematics_and_certifications.adoc +++ /dev/null @@ -1,36 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "PinePhone/Further_information" - identifier: "PinePhone/Further_information/Schematics_and_certifications" - weight: ---- - -PinePhone mainboard schematic: - -* https://files.pine64.org/doc/PinePhone/PinePhone%20v1.2b%20Released%20Schematic.pdf[PinePhone mainboard Released Schematic ver 1.2b] -* https://files.pine64.org/doc/PinePhone/PinePhone%20v1.2a%20Released%20Schematic.pdf[PinePhone mainboard Released Schematic ver 1.2a] -* https://files.pine64.org/doc/PinePhone/PinePhone%20v1.2%20Released%20Schematic.pdf[PinePhone mainboard Released Schematic ver 1.2] -* link:/documentation/PinePhone/Revisions/PinePhone_v1.2[PinePhone schematic ver 1.2 change list] -* https://files.pine64.org/doc/PinePhone/PinePhone%20Schematic%20v1.1%2020191031.pdf["Braveheart" PinePhone mainboard Schematic ver 1.1] -* https://files.pine64.org/doc/PinePhone/PinePhone%20mainboard%20top%20placement%20v1.1%2020191031.pdf["Braveheart" PinePhone mainboard component top placement drawing ver 1.1] -* https://files.pine64.org/doc/PinePhone/PinePhone%20mainboard%20bottom%20placement%20v1.1%2020191031.pdf["Braveheart" PinePhone mainboard component bottom placement drawing ver 1.1] -* link:/documentation/PinePhone/Further_information/Components[Components list] - -PinePhone USB-C small board schematic: - -* https://files.pine64.org/doc/PinePhone/PinePhone%20USB-C%20small%20board%20schematic%20v1.0%2020190730.pdf[PinePhone USB-C small board Schematic ver 1.0] -* https://files.pine64.org/doc/PinePhone/PinePhone%20USB-C%20small%20board%20top%20placement%20v1.0%2020190730.pdf[PinePhone USB-C small board component top placement drawing ver 1.0] -* https://files.pine64.org/doc/PinePhone/PinePhone%20USB-C%20small%20board%20bottom%20placement%20v1.0%2020190730.pdf[PinePhone USB-C small board component bottom placement drawing ver 1.0] - -PinePhone certifications: - -* https://files.pine64.org/doc/cert/PinePhone%20FCC%20SDOC%20Certificate-S19112602605001.pdf[PinePhone FCC Certificate] -* https://fcc.report/FCC-ID/2AWAG-PINEPHONE[RF Exposure SAR Information from FCC ID site] -* https://files.pine64.org/doc/cert/PinePhone%20CE%20RED%20Certificate-S19112602602.pdf[PinePhone CE RED Certificate] -* https://files.pine64.org/doc/cert/PinePhone%20ROHS%20Report.pdf[PinePhone ROHS Report] -* Note: PinePhone's Type Allocation Code (TAC) is _86769804_ - diff --git a/content/documentation/PinePhone/Further_information/Schematics_and_certifications.md b/content/documentation/PinePhone/Further_information/Schematics_and_certifications.md new file mode 100644 index 00000000..04f40854 --- /dev/null +++ b/content/documentation/PinePhone/Further_information/Schematics_and_certifications.md @@ -0,0 +1,35 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "PinePhone/Further_information" + identifier: "PinePhone/Further_information/Schematics_and_certifications" + weight: +--- + +PinePhone mainboard schematic: + +* [PinePhone mainboard Released Schematic ver 1.2b](https://files.pine64.org/doc/PinePhone/PinePhone%20v1.2b%20Released%20Schematic.pdf) +* [PinePhone mainboard Released Schematic ver 1.2a](https://files.pine64.org/doc/PinePhone/PinePhone%20v1.2a%20Released%20Schematic.pdf) +* [PinePhone mainboard Released Schematic ver 1.2](https://files.pine64.org/doc/PinePhone/PinePhone%20v1.2%20Released%20Schematic.pdf) +* [PinePhone schematic ver 1.2 change list](/documentation/PinePhone/Revisions/PinePhone_v1.2) +* ["Braveheart" PinePhone mainboard Schematic ver 1.1](https://files.pine64.org/doc/PinePhone/PinePhone%20Schematic%20v1.1%2020191031.pdf) +* ["Braveheart" PinePhone mainboard component top placement drawing ver 1.1](https://files.pine64.org/doc/PinePhone/PinePhone%20mainboard%20top%20placement%20v1.1%2020191031.pdf) +* ["Braveheart" PinePhone mainboard component bottom placement drawing ver 1.1](https://files.pine64.org/doc/PinePhone/PinePhone%20mainboard%20bottom%20placement%20v1.1%2020191031.pdf) +* [Components list](/documentation/PinePhone/Further_information/Components) + +PinePhone USB-C small board schematic: + +* [PinePhone USB-C small board Schematic ver 1.0](https://files.pine64.org/doc/PinePhone/PinePhone%20USB-C%20small%20board%20schematic%20v1.0%2020190730.pdf) +* [PinePhone USB-C small board component top placement drawing ver 1.0](https://files.pine64.org/doc/PinePhone/PinePhone%20USB-C%20small%20board%20top%20placement%20v1.0%2020190730.pdf) +* [PinePhone USB-C small board component bottom placement drawing ver 1.0](https://files.pine64.org/doc/PinePhone/PinePhone%20USB-C%20small%20board%20bottom%20placement%20v1.0%2020190730.pdf) + +PinePhone certifications: + +* [PinePhone FCC Certificate](https://files.pine64.org/doc/cert/PinePhone%20FCC%20SDOC%20Certificate-S19112602605001.pdf) +* [RF Exposure SAR Information from FCC ID site](https://fcc.report/FCC-ID/2AWAG-PINEPHONE) +* [PinePhone CE RED Certificate](https://files.pine64.org/doc/cert/PinePhone%20CE%20RED%20Certificate-S19112602602.pdf) +* [PinePhone ROHS Report](https://files.pine64.org/doc/cert/PinePhone%20ROHS%20Report.pdf) +* Note: PinePhone’s Type Allocation Code (TAC) is _86769804_ diff --git a/content/documentation/PinePhone/Further_information/Specifications.adoc b/content/documentation/PinePhone/Further_information/Specifications.adoc deleted file mode 100644 index ac5d05f1..00000000 --- a/content/documentation/PinePhone/Further_information/Specifications.adoc +++ /dev/null @@ -1,38 +0,0 @@ ---- -title: "Specifications" -draft: false -menu: - docs: - title: - parent: "PinePhone/Further_information" - identifier: "PinePhone/Further_information/Specifications" - weight: ---- - -* *Dimensions:* 160.5 x 76.6 x 9.2mm -* *Weight:* Between 180 ~ 200 grams -* *SIM Card:* Micro-SIM -* *Display:* -** *Size:* 5.95 inches (151mm) diagonal -** *Type:* HD IPS capacitive touchscreen, 16M colors -** *Resolution:* 1440x720, 18:9 ratio -* *System on Chip:* https://linux-sunxi.org/A64[Allwinner A64] -* *RAM:* 2GB or 3GB LPDDR3 SDRAM -* *Internal Storage:* 16GB or 32GB eMMC, extendable up to 2TB via microSD, supports SDHC and SDXC -* *Back Camera:* Single 5MP, 1/4", LED Flash -* *Front Camera:* Single 2MP, f/2.8, 1/5" -* *Sound:* Loudspeaker, 3.5mm jack & mic (jack doubles as hardware UART if hardware switch 6 is deactivated) -* *Communication:* -** *Modem:* https://www.quectel.com/product/lte-eg25-g/[Quectel EG25-G] -** *LTE-FDD*: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28 -** *LTE-TDD*: B38, B39, B40, B41 -** *WCDMA*: B1, B2, B4, B5, B6, B8, B19 -** *GSM*: B2, B3, B5, B8 (850, 900, 1800, 1900 MHz) -** *WLAN:* Wi-Fi 802.11 b/g/n, single-band, hotspot -** *Bluetooth:* 4.0, A2DP -** *GNSS:* GPS/GLONASS/BeiDou/Galileo/QZSS, with A-GPS -* *Sensors:* Accelerometer, gyroscope, proximity, ambient light, compass -* *Privacy switches:* Modem, WiFi & Bluetooth, Microphone, Cameras -* *Battery:* Lithium-ion, rated capacity 2800mAh (10.64Wh), typical capacity 3000mAh (11.40Wh) (nominally replaceable with any Samsung J7 form-factor battery) -* *I/O:* USB Type-C, USB Host, DisplayPort Alternate Mode output, 15W 5V 3A Quick Charge, follows USB PD specification - diff --git a/content/documentation/PinePhone/Further_information/Specifications.md b/content/documentation/PinePhone/Further_information/Specifications.md new file mode 100644 index 00000000..e8d0ab0f --- /dev/null +++ b/content/documentation/PinePhone/Further_information/Specifications.md @@ -0,0 +1,37 @@ +--- +title: "Specifications" +draft: false +menu: + docs: + title: + parent: "PinePhone/Further_information" + identifier: "PinePhone/Further_information/Specifications" + weight: +--- + +* **Dimensions:** 160.5 x 76.6 x 9.2mm +* **Weight:** Between 180 ~ 200 grams +* **SIM Card:** Micro-SIM +* **Display:** + * **Size:** 5.95 inches (151mm) diagonal + * **Type:** HD IPS capacitive touchscreen, 16M colors + * **Resolution:** 1440x720, 18:9 ratio +* **System on Chip:** [Allwinner A64](https://linux-sunxi.org/A64) +* **RAM:** 2GB or 3GB LPDDR3 SDRAM +* **Internal Storage:** 16GB or 32GB eMMC, extendable up to 2TB via microSD, supports SDHC and SDXC +* **Back Camera:** Single 5MP, 1/4", LED Flash +* **Front Camera:** Single 2MP, f/2.8, 1/5" +* **Sound:** Loudspeaker, 3.5mm jack & mic (jack doubles as hardware UART if hardware switch 6 is deactivated) +* **Communication:** + * **Modem:** [Quectel EG25-G](https://www.quectel.com/product/lte-eg25-g/) + * **LTE-FDD**: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28 + * **LTE-TDD**: B38, B39, B40, B41 + * **WCDMA**: B1, B2, B4, B5, B6, B8, B19 + * **GSM**: B2, B3, B5, B8 (850, 900, 1800, 1900 MHz) + * **WLAN:** Wi-Fi 802.11 b/g/n, single-band, hotspot + * **Bluetooth:** 4.0, A2DP + * **GNSS:** GPS/GLONASS/BeiDou/Galileo/QZSS, with A-GPS +* **Sensors:** Accelerometer, gyroscope, proximity, ambient light, compass +* **Privacy switches:** Modem, WiFi & Bluetooth, Microphone, Cameras +* **Battery:** Lithium-ion, rated capacity 2800mAh (10.64Wh), typical capacity 3000mAh (11.40Wh) (nominally replaceable with any Samsung J7 form-factor battery) +* **I/O:** USB Type-C, USB Host, DisplayPort Alternate Mode output, 15W 5V 3A Quick Charge, follows USB PD specification diff --git a/content/documentation/PinePhone_Pro/Further_information/Datasheets,_schematics_and_certifications.adoc b/content/documentation/PinePhone_Pro/Further_information/Datasheets,_schematics_and_certifications.adoc deleted file mode 100644 index 956dfe06..00000000 --- a/content/documentation/PinePhone_Pro/Further_information/Datasheets,_schematics_and_certifications.adoc +++ /dev/null @@ -1,28 +0,0 @@ ---- -title: "Datasheets, schematics and certifications" -draft: false -menu: - docs: - title: - parent: "PinePhone_Pro/Further_information" - identifier: "PinePhone_Pro/Further_information/Datasheets,_schematics_and_certifications" - weight: ---- - -PinePhone Pro mainboard schematic: - -* https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf[PinePhone Pro mainboard Explorer Edition Released Schematic ver 1.0 20211127] -* https://files.pine64.org/doc/PinePhonePro/PinephonePro_PCB_Component_Placement-V02_20211127-top.pdf[PinePhone Pro mainboard Explorer Edition component top placement ver 1.0 20211127] -* https://files.pine64.org/doc/PinePhonePro/PinephonePro_PCB_Component_Placement-V02_20211127-bottom.pdf[PinePhone Pro mainboard Explorer Edition component bottom placement ver 1.0 20211127] - -PinePhone Pro USB-C small board schematic: - -* TBD - -Certifications: - -* https://files.pine64.org/doc/cert/PinePhone%20Pro%20FCC%20Certificate-S21101902805001.pdf[PinePhone Pro FCC Certificate] -* https://files.pine64.org/doc/cert/PinePhonePro%20SAR%20Evaluation%20Report-S21101902806001.pdf[PinePhone Pro SAR Evaluation Report] -* https://files.pine64.org/doc/cert/PinePhone%20Pro%20CE%20RED%20Certificate-S21101902802-R1.pdf[PinePhone Pro CE RED Certificate] -* https://files.pine64.org/doc/cert/PinePhonePro%20RoHS%20Test%20Report.pdf[PinePhone Pro ROHS Test Report] - diff --git a/content/documentation/PinePhone_Pro/Further_information/Datasheets,_schematics_and_certifications.md b/content/documentation/PinePhone_Pro/Further_information/Datasheets,_schematics_and_certifications.md new file mode 100644 index 00000000..15867299 --- /dev/null +++ b/content/documentation/PinePhone_Pro/Further_information/Datasheets,_schematics_and_certifications.md @@ -0,0 +1,27 @@ +--- +title: "Datasheets, schematics and certifications" +draft: false +menu: + docs: + title: + parent: "PinePhone_Pro/Further_information" + identifier: "PinePhone_Pro/Further_information/Datasheets,_schematics_and_certifications" + weight: +--- + +PinePhone Pro mainboard schematic: + +* [PinePhone Pro mainboard Explorer Edition Released Schematic ver 1.0 20211127](https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf) +* [PinePhone Pro mainboard Explorer Edition component top placement ver 1.0 20211127](https://files.pine64.org/doc/PinePhonePro/PinephonePro_PCB_Component_Placement-V02_20211127-top.pdf) +* [PinePhone Pro mainboard Explorer Edition component bottom placement ver 1.0 20211127](https://files.pine64.org/doc/PinePhonePro/PinephonePro_PCB_Component_Placement-V02_20211127-bottom.pdf) + +PinePhone Pro USB-C small board schematic: + +* TBD + +Certifications: + +* [PinePhone Pro FCC Certificate](https://files.pine64.org/doc/cert/PinePhone%20Pro%20FCC%20Certificate-S21101902805001.pdf) +* [PinePhone Pro SAR Evaluation Report](https://files.pine64.org/doc/cert/PinePhonePro%20SAR%20Evaluation%20Report-S21101902806001.pdf) +* [PinePhone Pro CE RED Certificate](https://files.pine64.org/doc/cert/PinePhone%20Pro%20CE%20RED%20Certificate-S21101902802-R1.pdf) +* [PinePhone Pro ROHS Test Report](https://files.pine64.org/doc/cert/PinePhonePro%20RoHS%20Test%20Report.pdf) diff --git a/content/documentation/PinePhone_Pro/Further_information/Specifications.adoc b/content/documentation/PinePhone_Pro/Further_information/Specifications.adoc deleted file mode 100644 index b822543c..00000000 --- a/content/documentation/PinePhone_Pro/Further_information/Specifications.adoc +++ /dev/null @@ -1,38 +0,0 @@ ---- -title: "Specifications" -draft: false -menu: - docs: - title: - parent: "PinePhone_Pro/Further_information" - identifier: "PinePhone_Pro/Further_information/Specifications" - weight: ---- - -* *Dimensions:* 160.8 x 76.6 x 11.1mm -* *Weight:* Approx. 220g -* *SIM Card:* Nano-SIM (Micro-SIM before 07/2022) -* *Display:* -** *Size:* 6 inches (151mm) diagonal -** *Type:* 1440 x 720 in-cell IPS with Gorilla Glass 4™ -** *Resolution:* 1440x720, 18:9 ratio -* *System on Chip:* Rockchip RK3399S 64bit SoC – 2x A72 and 4x A53 CPU cores @ 1.5GHz -* *RAM:* 4GB LPDDR4 @ 800MHz -* *Internal Storage:* 128GB eMMC, extendable up to 2TB via microSD, supports SDHC and SDXC -* *NOR Flash:* Listed as [GigaDevices] GD25LQ128EWIGR, but physical inspection found a SiliconKaiser SK25LP128. -* *Back Camera:* 13MP Sony IMX258 with Gorilla Glass 4™ protective layer, LED Flash -* *Front Camera:* 8MP, OmniVision OV8858 front-facing camera -* *Sound:* Loudspeaker, 3.5mm jack & mic (jack doubles as hardware UART if hardware switch 6 is deactivated) -* *Communication:* -** *Modem* Quectel EG25-G -** *LTE-FDD*: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28 -** *LTE-TDD*: B38, B39, B40, B41 -** *WCDMA*: B1, B2, B4, B5, B6, B8, B19 -** *GSM*: B2, B3, B5, B8 (850, 900, 1800, 1900 MHz) -** *WLAN & Bluetooth:* Wi-Fi 802.11AC, hotspot capable + Bluetooth V5.0 -** *GNSS:* GPS/GLONASS/BeiDou/Galileo/QZSS, with A-GPS -* *Sensors:* Accelerometer, gyroscope, proximity, ambient light, compass -* *Privacy switches:* Modem, WiFi & Bluetooth, Microphone, Cameras -* *Battery:* Lithium-ion, rated capacity 2800mAh (10.64Wh), typical capacity 3000mAh (11.40Wh) (nominally replaceable with any Samsung J7 form-factor battery; unglue bottom black plastic with your nail from Samsung battery before installation in order to match the dimensions) -* *I/O:* USB Type-C, USB Host, DisplayPort Alternate Mode output, 15W 5V 3A Quick Charge, follows USB PD specification - diff --git a/content/documentation/PinePhone_Pro/Further_information/Specifications.md b/content/documentation/PinePhone_Pro/Further_information/Specifications.md new file mode 100644 index 00000000..7aedba4a --- /dev/null +++ b/content/documentation/PinePhone_Pro/Further_information/Specifications.md @@ -0,0 +1,37 @@ +--- +title: "Specifications" +draft: false +menu: + docs: + title: + parent: "PinePhone_Pro/Further_information" + identifier: "PinePhone_Pro/Further_information/Specifications" + weight: +--- + +* **Dimensions:** 160.8 x 76.6 x 11.1mm +* **Weight:** Approx. 220g +* **SIM Card:** Nano-SIM (Micro-SIM before 07/2022) +* **Display:** + * **Size:** 6 inches (151mm) diagonal + * **Type:** 1440 x 720 in-cell IPS with Gorilla Glass 4™ + * **Resolution:** 1440x720, 18:9 ratio +* **System on Chip:** Rockchip RK3399S 64bit SoC – 2x A72 and 4x A53 CPU cores @ 1.5GHz +* **RAM:** 4GB LPDDR4 @ 800MHz +* **Internal Storage:** 128GB eMMC, extendable up to 2TB via microSD, supports SDHC and SDXC +* **NOR Flash:** Listed as [GigaDevices] GD25LQ128EWIGR, but physical inspection found a SiliconKaiser SK25LP128. +* **Back Camera:** 13MP Sony IMX258 with Gorilla Glass 4™ protective layer, LED Flash +* **Front Camera:** 8MP, OmniVision OV8858 front-facing camera +* **Sound:** Loudspeaker, 3.5mm jack & mic (jack doubles as hardware UART if hardware switch 6 is deactivated) +* **Communication:** + * **Modem** Quectel EG25-G + * **LTE-FDD**: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28 + * **LTE-TDD**: B38, B39, B40, B41 + * **WCDMA**: B1, B2, B4, B5, B6, B8, B19 + * **GSM**: B2, B3, B5, B8 (850, 900, 1800, 1900 MHz) + * **WLAN & Bluetooth:** Wi-Fi 802.11AC, hotspot capable + Bluetooth V5.0 + * **GNSS:** GPS/GLONASS/BeiDou/Galileo/QZSS, with A-GPS +* **Sensors:** Accelerometer, gyroscope, proximity, ambient light, compass +* **Privacy switches:** Modem, WiFi & Bluetooth, Microphone, Cameras +* **Battery:** Lithium-ion, rated capacity 2800mAh (10.64Wh), typical capacity 3000mAh (11.40Wh) (nominally replaceable with any Samsung J7 form-factor battery; unglue bottom black plastic with your nail from Samsung battery before installation in order to match the dimensions) +* **I/O:** USB Type-C, USB Host, DisplayPort Alternate Mode output, 15W 5V 3A Quick Charge, follows USB PD specification diff --git a/content/documentation/PinePower/External_links.adoc b/content/documentation/PinePower/External_links.adoc deleted file mode 100644 index 55e1e839..00000000 --- a/content/documentation/PinePower/External_links.adoc +++ /dev/null @@ -1,16 +0,0 @@ ---- -title: "External links" -draft: false -menu: - docs: - title: - parent: "PinePower" - identifier: "PinePower/External_links" - weight: 3 ---- - -* https://www.pine64.org/2020/12/15/december-update-the-longest-one-yet/[Pine blog, containing news about the PinePower products] -* https://pine64.com/product/pinepower-65w-gan-2c1a-charger-with-international-plugs/[PinePower 65W on the official Pine store] -* https://pine64.com/product/pinepower-120w-desktop-power-supply-eu-version/[PinePower 120W EU version on the official Pine store] -* https://pine64.com/product/pinepower-120w-desktop-power-supply-us-version/[PinePower 120W US version on the official Pine store] - diff --git a/content/documentation/PinePower/External_links.md b/content/documentation/PinePower/External_links.md new file mode 100644 index 00000000..37e1dc91 --- /dev/null +++ b/content/documentation/PinePower/External_links.md @@ -0,0 +1,15 @@ +--- +title: "External links" +draft: false +menu: + docs: + title: + parent: "PinePower" + identifier: "PinePower/External_links" + weight: 3 +--- + +* [Pine blog, containing news about the PinePower products](https://www.pine64.org/2020/12/15/december-update-the-longest-one-yet/) +* [PinePower 65W on the official Pine store](https://pine64.com/product/pinepower-65w-gan-2c1a-charger-with-international-plugs/) +* [PinePower 120W EU version on the official Pine store](https://pine64.com/product/pinepower-120w-desktop-power-supply-eu-version/) +* [PinePower 120W US version on the official Pine store](https://pine64.com/product/pinepower-120w-desktop-power-supply-us-version/) diff --git a/content/documentation/PineTab-V/Frequently_asked_questions.adoc b/content/documentation/PineTab-V/Frequently_asked_questions.md similarity index 58% rename from content/documentation/PineTab-V/Frequently_asked_questions.adoc rename to content/documentation/PineTab-V/Frequently_asked_questions.md index 4eee267a..943f7761 100644 --- a/content/documentation/PineTab-V/Frequently_asked_questions.adoc +++ b/content/documentation/PineTab-V/Frequently_asked_questions.md @@ -11,4 +11,4 @@ menu: _What is the Performance of the PineTab2 compared to the PineTab-V?_ -The PineTab2 is notably faster than the PineTab-V. You can see this by https://github.com/ThomasKaiser/sbc-bench/blob/master/Results.md[comparing the Quartz64 sbc-bench results to the Star64 ones]. Performance should not be a factor of consideration when purchasing a PineTab-V. \ No newline at end of file +The PineTab2 is notably faster than the PineTab-V. You can see this by [comparing the Quartz64 sbc-bench results to the Star64 ones](https://github.com/ThomasKaiser/sbc-bench/blob/master/Results.md). Performance should not be a factor of consideration when purchasing a PineTab-V. diff --git a/content/documentation/PineTab-V/Further_information/Certifications.adoc b/content/documentation/PineTab-V/Further_information/Certifications.adoc deleted file mode 100644 index 6b6cf078..00000000 --- a/content/documentation/PineTab-V/Further_information/Certifications.adoc +++ /dev/null @@ -1,18 +0,0 @@ ---- -title: "Certifications" -draft: false -menu: - docs: - title: - parent: "PineTab-V/Further_information" - identifier: "PineTab-V/Further_information/Certifications" - weight: ---- - -PineTab-V certifications: - -* https://files.pine64.org/doc/cert/Pinetab-V%20FCC-SDOC%20Certificate-LCSA08013059E.pdf[PineTab-V FCC Certificate] -* https://files.pine64.org/doc/cert/Pinetab-V%20CE%20RED%20Certificate-LCSA08013058E.pdf[PineTab-V CE RED Certificate] -* https://files.pine64.org/doc/cert/PineTab-V%20CE%20EMC%20Certificate-LCSA08013057E.pdf[PineTab-V CE EMC Certificate] -* https://files.pine64.org/doc/cert/PineTab-V%20ROHS%20Report-LCSA08013061R.pdf[PineTab-V ROHS Test Report] -* https://files.pine64.org/doc/cert/PineTab2%20Keyboard%20CE%20EMC%20Certificate-LCSA062623001E.pdf[PineTab2/PineTab-V Detached Keyboard CE EMMC Certificate] \ No newline at end of file diff --git a/content/documentation/PineTab-V/Further_information/Certifications.md b/content/documentation/PineTab-V/Further_information/Certifications.md new file mode 100644 index 00000000..7f9999b3 --- /dev/null +++ b/content/documentation/PineTab-V/Further_information/Certifications.md @@ -0,0 +1,18 @@ +--- +title: "Certifications" +draft: false +menu: + docs: + title: + parent: "PineTab-V/Further_information" + identifier: "PineTab-V/Further_information/Certifications" + weight: +--- + +PineTab-V certifications: + +* [PineTab-V FCC Certificate](https://files.pine64.org/doc/cert/Pinetab-V%20FCC-SDOC%20Certificate-LCSA08013059E.pdf) +* [PineTab-V CE RED Certificate](https://files.pine64.org/doc/cert/Pinetab-V%20CE%20RED%20Certificate-LCSA08013058E.pdf) +* [PineTab-V CE EMC Certificate](https://files.pine64.org/doc/cert/PineTab-V%20CE%20EMC%20Certificate-LCSA08013057E.pdf) +* [PineTab-V ROHS Test Report](https://files.pine64.org/doc/cert/PineTab-V%20ROHS%20Report-LCSA08013061R.pdf) +* [PineTab2/PineTab-V Detached Keyboard CE EMMC Certificate](https://files.pine64.org/doc/cert/PineTab2%20Keyboard%20CE%20EMC%20Certificate-LCSA062623001E.pdf) diff --git a/content/documentation/PineTab-V/Further_information/Schematics.adoc b/content/documentation/PineTab-V/Further_information/Schematics.adoc deleted file mode 100644 index f16290ee..00000000 --- a/content/documentation/PineTab-V/Further_information/Schematics.adoc +++ /dev/null @@ -1,19 +0,0 @@ ---- -title: "Schematics" -draft: false -menu: - docs: - title: - parent: "PineTab-V/Further_information" - identifier: "PineTab-V/Further_information/Schematics" - weight: ---- - -image:/documentation/PineTab-V/images/PineTab-V-PCB.jpg[PineTab-V board,title="PineTab-V board",width=450] - -PineTab-V mainboard schematic: - -* https://files.pine64.org/doc/PineTab/PineTab-V_Schematic_Ver1-20230614.pdf[PineTab-V mainboard Released Schematic-20230614 ver 1.0] -* https://files.pine64.org/doc/PineTab/PineTab-V_comp_ref_top-20230614.pdf[PineTab-V PCB Component Reference location v1.0 (top layer)] -* https://files.pine64.org/doc/PineTab/PineTab-V_comp_ref_bottom-20230614.pdf[PineTab-V PCB Component Reference location v1.0 (bottom layer)] -* https://files.pine64.org/doc/PineTab/pinetab2-V_uart_console_schematic-20221107.pdf[PineTab2/PineTab-V UART Dongle Schematic-20221107] \ No newline at end of file diff --git a/content/documentation/PineTab-V/Further_information/Schematics.md b/content/documentation/PineTab-V/Further_information/Schematics.md new file mode 100644 index 00000000..ea9925a3 --- /dev/null +++ b/content/documentation/PineTab-V/Further_information/Schematics.md @@ -0,0 +1,19 @@ +--- +title: "Schematics" +draft: false +menu: + docs: + title: + parent: "PineTab-V/Further_information" + identifier: "PineTab-V/Further_information/Schematics" + weight: +--- + +![PineTab-V board](/documentation/PineTab-V/images/PineTab-V-PCB.jpg) + +PineTab-V mainboard schematic: + +* [PineTab-V mainboard Released Schematic-20230614 ver 1.0](https://files.pine64.org/doc/PineTab/PineTab-V_Schematic_Ver1-20230614.pdf) +* [PineTab-V PCB Component Reference location v1.0 (top layer)](https://files.pine64.org/doc/PineTab/PineTab-V_comp_ref_top-20230614.pdf) +* [PineTab-V PCB Component Reference location v1.0 (bottom layer)](https://files.pine64.org/doc/PineTab/PineTab-V_comp_ref_bottom-20230614.pdf) +* [PineTab2/PineTab-V UART Dongle Schematic-20221107](https://files.pine64.org/doc/PineTab/pinetab2-V_uart_console_schematic-20221107.pdf) diff --git a/content/documentation/PineTab-V/Variants.adoc b/content/documentation/PineTab-V/Variants.md similarity index 83% rename from content/documentation/PineTab-V/Variants.adoc rename to content/documentation/PineTab-V/Variants.md index 401d101b..4d5ec286 100644 --- a/content/documentation/PineTab-V/Variants.adoc +++ b/content/documentation/PineTab-V/Variants.md @@ -12,4 +12,4 @@ menu: There are currently two variants of the PineTab-V: * PineTab-V – 4GB RAM and 64GB eMMC storage -* PineTab-V – 8GB RAM and 128GB eMMC storage \ No newline at end of file +* PineTab-V – 8GB RAM and 128GB eMMC storage diff --git a/content/documentation/PineTab-V/_index.adoc b/content/documentation/PineTab-V/_index.adoc index 25190f19..5e91f9ee 100644 --- a/content/documentation/PineTab-V/_index.adoc +++ b/content/documentation/PineTab-V/_index.adoc @@ -14,4 +14,5 @@ image:/documentation/PineTab-V/images/Pinetabv_1.jpg[The PineTab-V with the deta The _PineTab-V_ is _PINE64's_ first RISC-V tablet. It is based on the JH7110 64-bit RISC-V SoC. == Introduction + In late 2022, PINE64 announced plans to help grow the RISC-V hardware ecosystem alongside the existing ARM-based device line-up. The PineTab-V is an experimental device, which ships without an OS and without any promises. The JH7110 RISC-V SoC, and the RISC-V architecture in more general, is currently best described as having limited Linux support. You can think of it as a convenient development platform targeted at those of you interested in bringing Linux support to JH7110 and, by extension, the entire RISC-V ecosystem. \ No newline at end of file diff --git a/content/documentation/PineTab/Assembly_and_disassembly.adoc b/content/documentation/PineTab/Assembly_and_disassembly.md similarity index 88% rename from content/documentation/PineTab/Assembly_and_disassembly.adoc rename to content/documentation/PineTab/Assembly_and_disassembly.md index 5efa0fe4..eb67473d 100644 --- a/content/documentation/PineTab/Assembly_and_disassembly.adoc +++ b/content/documentation/PineTab/Assembly_and_disassembly.md @@ -14,11 +14,10 @@ Special care should be directed to AVOID anything that may appear to cause a "be Gently use fingernails (or if you have one, plastic pry), starting in the very middle location for each side (saving keyboard connector latch over area (bottom side) for the very last removal step). -Work your way from the inner middle on each side, slowly. Slide gently towards the direction of each corner (saving the lifting of actual corners themselves for the second to last step)). Careful not to break thin speaker wires that line the outside of the inner case. +Work your way from the inner middle on each side, slowly. Slide gently towards the direction of each corner (saving the lifting of actual corners themselves for the second to last step). Careful not to break thin speaker wires that line the outside of the inner case. The very last opening piece should be the "latch over" (where the keyboard pins connect). KEEP IN MIND: The main key here is to avoid any potential "bend" of the screen. We save the corners until after working on the middle of each side to reduce pressure on the screen. Do not force anything. If it is not coming off with gentle effort, you are likely doing something wrong (try another side middle). - diff --git a/content/documentation/PineTab/Further_information/Datasheets.adoc b/content/documentation/PineTab/Further_information/Datasheets.adoc deleted file mode 100644 index 27a58c86..00000000 --- a/content/documentation/PineTab/Further_information/Datasheets.adoc +++ /dev/null @@ -1,50 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "PineTab/Further_information" - identifier: "PineTab/Further_information/Datasheets" - weight: ---- - -Allwinner A64 SoC information: - -* https://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf[Allwinner A64 SoC brief introduction] -* https://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf[Allwinner A64 SoC Data Sheet V1.1 (Official Released Version)] -* https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf[Allwinner A64 SoC User Manual V1.0 (Official Release Version)] - -X-Powers AXP803 PMU (Power Management Unit) information: - -* https://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf[AXP803 PMIC datasheet] - -LPDDR3 (178 Balls) SDRAM: - -* https://files.pine64.org/doc/datasheet/pinephone/ATL3A1632H12A_mobile_lpddr3_11x11.5_v1.0_1600.pdf[Artmem LPDDR3 datasheet] - -eMMC information: - -* https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf[PINE64 eMMC module schematic] -* https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf[PINE64 USB adapter for eMMC module V2 schematic] -* https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar[PINE64 USB adapter for eMMC module PCB in JPEG] -* https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf[64GB SanDisk eMMC Datasheet] - -CMOS camera module information: - -* https://files.pine64.org/doc/datasheet/pinephone/OV5640_datasheet.pdf[OV5640 5MP CMOS Image Sensor SoC for Rear Module datasheet] -* https://files.pine64.org/doc/datasheet/pinephone/GC2145%20CSP%20DataSheet%20release%20V1.0_20131201.pdf[GC2145 2MP CMOS Image Sensor SoC for Front Module datasheet] - -LCD touch screen panel information: - -* https://files.pine64.org/doc/datasheet/pinetab/GT9271.pdf[GOODiX GT9271 Capacitive Touch Controller datasheet] -* https://files.pine64.org/doc/datasheet/pinetab/GT9271_Config_20200818_142030_V66.cfg[PineTab GT9271 Capacitive Touch Controller configuration file] - -Lithium battery information: - -* N/A - -WiFi/BT module information: - -* https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf[RTL8723BS/RTL8723CS specification] - diff --git a/content/documentation/PineTab/Further_information/Datasheets.md b/content/documentation/PineTab/Further_information/Datasheets.md new file mode 100644 index 00000000..97321ec3 --- /dev/null +++ b/content/documentation/PineTab/Further_information/Datasheets.md @@ -0,0 +1,49 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "PineTab/Further_information" + identifier: "PineTab/Further_information/Datasheets" + weight: +--- + +Allwinner A64 SoC information: + +* [Allwinner A64 SoC brief introduction](https://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf) +* [Allwinner A64 SoC Data Sheet V1.1 (Official Released Version)](https://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf) +* [Allwinner A64 SoC User Manual V1.0 (Official Release Version)](https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf) + +X-Powers AXP803 PMU (Power Management Unit) information: + +* [AXP803 PMIC datasheet](https://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf) + +LPDDR3 (178 Balls) SDRAM: + +* [Artmem LPDDR3 datasheet](https://files.pine64.org/doc/datasheet/pinephone/ATL3A1632H12A_mobile_lpddr3_11x11.5_v1.0_1600.pdf) + +eMMC information: + +* [PINE64 eMMC module schematic](https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf) +* [PINE64 USB adapter for eMMC module V2 schematic](https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf) +* [PINE64 USB adapter for eMMC module PCB in JPEG](https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar) +* [64GB SanDisk eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf) + +CMOS camera module information: + +* [OV5640 5MP CMOS Image Sensor SoC for Rear Module datasheet](https://files.pine64.org/doc/datasheet/pinephone/OV5640_datasheet.pdf) +* [GC2145 2MP CMOS Image Sensor SoC for Front Module datasheet](https://files.pine64.org/doc/datasheet/pinephone/GC2145%20CSP%20DataSheet%20release%20V1.0_20131201.pdf) + +LCD touch screen panel information: + +* [GOODiX GT9271 Capacitive Touch Controller datasheet](https://files.pine64.org/doc/datasheet/pinetab/GT9271.pdf) +* [PineTab GT9271 Capacitive Touch Controller configuration file](https://files.pine64.org/doc/datasheet/pinetab/GT9271_Config_20200818_142030_V66.cfg) + +Lithium battery information: + +* N/A + +WiFi/BT module information: + +* [RTL8723BS/RTL8723CS specification](https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf) diff --git a/content/documentation/PineTab/Further_information/External_Links.adoc b/content/documentation/PineTab/Further_information/External_Links.adoc deleted file mode 100644 index 9935867f..00000000 --- a/content/documentation/PineTab/Further_information/External_Links.adoc +++ /dev/null @@ -1,16 +0,0 @@ ---- -title: "External Links" -draft: false -menu: - docs: - title: - parent: "PineTab/Further_information" - identifier: "PineTab/Further_information/External_Links" - weight: ---- - -* https://pine64.com/product/pinetab-10-1-linux-tablet/[The PineTab on the Pine64 store] -* https://forum.pine64.org/forumdisplay.php?fid=140[The PineTab section of the Pine64 forums] -* https://forum.pine64.org/showthread.php?tid=11401[Comments on back cover removal on forums] -* https://forum.pine64.org/showthread.php?tid=13118[Demonstration Video: Pinetab back cover removal on forums] - diff --git a/content/documentation/PineTab/Further_information/External_Links.md b/content/documentation/PineTab/Further_information/External_Links.md new file mode 100644 index 00000000..e4350acc --- /dev/null +++ b/content/documentation/PineTab/Further_information/External_Links.md @@ -0,0 +1,15 @@ +--- +title: "External Links" +draft: false +menu: + docs: + title: + parent: "PineTab/Further_information" + identifier: "PineTab/Further_information/External_Links" + weight: +--- + +* [The PineTab on the Pine64 store](https://pine64.com/product/pinetab-10-1-linux-tablet/) +* [The PineTab section of the Pine64 forums](https://forum.pine64.org/forumdisplay.php?fid=140) +* [Comments on back cover removal on forums](https://forum.pine64.org/showthread.php?tid=11401) +* [Demonstration Video: Pinetab back cover removal on forums](https://forum.pine64.org/showthread.php?tid=13118) diff --git a/content/documentation/PineTab/Further_information/Schematics_and_certifications.adoc b/content/documentation/PineTab/Further_information/Schematics_and_certifications.adoc deleted file mode 100644 index 9c8357a9..00000000 --- a/content/documentation/PineTab/Further_information/Schematics_and_certifications.adoc +++ /dev/null @@ -1,30 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "PineTab/Further_information" - identifier: "PineTab/Further_information/Schematics_and_certifications" - weight: ---- - -PineTab mainboard schematic: - -* https://files.pine64.org/doc/PineTab/PineTab%20Schematic%20v1.2-20191125.pdf[PineTab mainboard Released Schematic ver 1.2] -* https://files.pine64.org/doc/PineTab/PineTab%20Board%20View%20v1.2-20191201-top.pdf[PineTab mainboard component placement ver 1.2 - Top View] -* https://files.pine64.org/doc/PineTab/PineTab%20Board%20View%20v1.2-20191201-bottom.pdf[PineTab mainboard component placement ver 1.2 - Bottom View] - -PineTab keyboard schematic: - -* PineTab keyboard and Pinebook (Pro) keyboard using same controller and from same engineering source -* https://files.pine64.org/doc/PineTab/Pinetab%20HB092A%20Keyboard%20Schematic.pdf[PineTab Keyboard Schematic] -* https://files.pine64.org/doc/PineTab/HB092_0884232458_Hynitron_PTP_20200514_662905_Linux_US_BackLight_CRC_175057F5.hex[PineTab keyboard firmware code] -* https://files.pine64.org/doc/PineTab/SH68F83V2.0.pdf[PineTab Keyboard Controller Datasheet] - -PineTab certifications: - -* https://files.pine64.org/doc/cert/PineTab%20FCC-SDOC%20Certificate-S20060600404001.pdf[PineTab FCC Certificate] -* https://files.pine64.org/doc/cert/PineTab%20CE-RED%20Certificate-S20060600403.pdf[PineTab CE RED Certificate] -* https://files.pine64.org/doc/cert/PINETAB%20ROHS%20TEST%20REPORT.pdf[PineTab ROHS Test Report] - diff --git a/content/documentation/PineTab/Further_information/Schematics_and_certifications.md b/content/documentation/PineTab/Further_information/Schematics_and_certifications.md new file mode 100644 index 00000000..9bdeb390 --- /dev/null +++ b/content/documentation/PineTab/Further_information/Schematics_and_certifications.md @@ -0,0 +1,29 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "PineTab/Further_information" + identifier: "PineTab/Further_information/Schematics_and_certifications" + weight: +--- + +PineTab mainboard schematic: + +* [PineTab mainboard Released Schematic ver 1.2](https://files.pine64.org/doc/PineTab/PineTab%20Schematic%20v1.2-20191125.pdf) +* [PineTab mainboard component placement ver 1.2 - Top View](https://files.pine64.org/doc/PineTab/PineTab%20Board%20View%20v1.2-20191201-top.pdf) +* [PineTab mainboard component placement ver 1.2 - Bottom View](https://files.pine64.org/doc/PineTab/PineTab%20Board%20View%20v1.2-20191201-bottom.pdf) + +PineTab keyboard schematic: + +* PineTab keyboard and Pinebook (Pro) keyboard using same controller and from same engineering source +* [PineTab Keyboard Schematic](https://files.pine64.org/doc/PineTab/Pinetab%20HB092A%20Keyboard%20Schematic.pdf) +* [PineTab keyboard firmware code](https://files.pine64.org/doc/PineTab/HB092_0884232458_Hynitron_PTP_20200514_662905_Linux_US_BackLight_CRC_175057F5.hex) +* [PineTab Keyboard Controller Datasheet](https://files.pine64.org/doc/PineTab/SH68F83V2.0.pdf) + +PineTab certifications: + +* [PineTab FCC Certificate](https://files.pine64.org/doc/cert/PineTab%20FCC-SDOC%20Certificate-S20060600404001.pdf) +* [PineTab CE RED Certificate](https://files.pine64.org/doc/cert/PineTab%20CE-RED%20Certificate-S20060600403.pdf) +* [PineTab ROHS Test Report](https://files.pine64.org/doc/cert/PINETAB%20ROHS%20TEST%20REPORT.pdf) diff --git a/content/documentation/PineTab/Further_information/Specifications.adoc b/content/documentation/PineTab/Further_information/Specifications.adoc deleted file mode 100644 index f6e31dec..00000000 --- a/content/documentation/PineTab/Further_information/Specifications.adoc +++ /dev/null @@ -1,39 +0,0 @@ ---- -title: "Specifications" -draft: false -menu: - docs: - title: - parent: "PineTab/Further_information" - identifier: "PineTab/Further_information/Specifications" - weight: ---- - -* *Dimensions:* 11mm x 175mm x 260mm (Thickness, Width, Height) -* *Weight:* 575g (Tablet alone) -* *Build:* Plastic -* *Storage:* -** 64GB of internal eMMC storage -** MicroSD slot, bootable -** M.2 SSD slot, supports SATA and USB devices only, not NVME (optional) -* *Cameras:* 2Mpx Front, 5Mpx Rear -* *SOC:* Allwinner A64 Quad Core -* *CPU:* 4x ARM A53 1.152GHz -* *GPU:* Mali 400 MP2 -* *RAM:* 2GB LPDDR3 -* *I/O:* HD Video Out (Mini HDMI), Micro USB 2.0 OTG, USB 2.0 A host, 3.5mm Headphone/Mic combo, -* *Network:* -** WiFi (802.11b/g/n, 2.4GHz only) -** Bluetooth 2.1 -** M.2 LTE / Cell MODEM card, (optional, and takes place of optional M.2 SSD) -* *Display:* -** *Size:* 10.1 inches (257mm) diagonal -** *Type:* HD IPS capacitive touchscreen, 16M colors -** *Resolution:* 1280x800, 16:10 ratio -* *Attachments/Accessories:* Magnetically attached keyboard (optional) -* *Battery:* 6000MAh (6Ah) -* *Misc. features:* -** Volume rocker -** Speakers and Microphone -** 2.5mm OD 0.7mm ID DC Jack Power (5V 2A) Port - diff --git a/content/documentation/PineTab/Further_information/Specifications.md b/content/documentation/PineTab/Further_information/Specifications.md new file mode 100644 index 00000000..954a833d --- /dev/null +++ b/content/documentation/PineTab/Further_information/Specifications.md @@ -0,0 +1,38 @@ +--- +title: "Specifications" +draft: false +menu: + docs: + title: + parent: "PineTab/Further_information" + identifier: "PineTab/Further_information/Specifications" + weight: +--- + +* **Dimensions:** 11mm x 175mm x 260mm (Thickness, Width, Height) +* **Weight:** 575g (Tablet alone) +* **Build:** Plastic +* **Storage:** + * 64GB of internal eMMC storage + * MicroSD slot, bootable + * M.2 SSD slot, supports SATA and USB devices only, not NVME (optional) +* **Cameras:** 2Mpx Front, 5Mpx Rear +* **SOC:** Allwinner A64 Quad Core +* **CPU:** 4x ARM A53 1.152GHz +* **GPU:** Mali 400 MP2 +* **RAM:** 2GB LPDDR3 +* **I/O:** HD Video Out (Mini HDMI), Micro USB 2.0 OTG, USB 2.0 A host, 3.5mm Headphone/Mic combo, +* **Network:** + * WiFi (802.11b/g/n, 2.4GHz only) + * Bluetooth 2.1 + * M.2 LTE / Cell MODEM card, (optional, and takes place of optional M.2 SSD) +* **Display:** + * **Size:** 10.1 inches (257mm) diagonal + * **Type:** HD IPS capacitive touchscreen, 16M colors + * **Resolution:** 1280x800, 16:10 ratio +* **Attachments/Accessories:** Magnetically attached keyboard (optional) +* **Battery:** 6000MAh (6Ah) +* **Misc. features:** + * Volume rocker + * Speakers and Microphone + * 2.5mm OD 0.7mm ID DC Jack Power (5V 2A) Port diff --git a/content/documentation/PineTab/Installation_instructions.adoc b/content/documentation/PineTab/Installation_instructions.adoc deleted file mode 100644 index 0a305a99..00000000 --- a/content/documentation/PineTab/Installation_instructions.adoc +++ /dev/null @@ -1,12 +0,0 @@ ---- -title: "Installation instructions" -draft: false -menu: - docs: - title: - parent: "PineTab" - identifier: "PineTab/Installation_instructions" - weight: 1 ---- - -For instructions on how to install the operating systems to the eMMC or microSD card see link:/documentation/PinePhone/Installation_instructions[Installation instructions]. The information is almost the same for the PineTab, as it is a very similar device. Do not try to use the PinePhone images though, use the PineTab images linked above. \ No newline at end of file diff --git a/content/documentation/PineTab/Installation_instructions.md b/content/documentation/PineTab/Installation_instructions.md new file mode 100644 index 00000000..10dd0d5a --- /dev/null +++ b/content/documentation/PineTab/Installation_instructions.md @@ -0,0 +1,12 @@ +--- +title: "Installation instructions" +draft: false +menu: + docs: + title: + parent: "PineTab" + identifier: "PineTab/Installation_instructions" + weight: 2 +--- + +For instructions on how to install the operating systems to the eMMC or microSD card see [Installation instructions](/documentation/PinePhone/Installation_instructions). The information is almost the same for the PineTab, as it is a very similar device. Do not try to use the PinePhone images though, use the PineTab images linked above. diff --git a/content/documentation/PineTab/Keyboard.adoc b/content/documentation/PineTab/Keyboard.adoc deleted file mode 100644 index daff71ee..00000000 --- a/content/documentation/PineTab/Keyboard.adoc +++ /dev/null @@ -1,15 +0,0 @@ ---- -title: "Keyboard" -draft: false -menu: - docs: - title: - parent: "PineTab" - identifier: "PineTab/Keyboard" - weight: 3 ---- - -*Overview:* The PineTab detachable keyboard features a full function row, FN key functionality, meta key (where the Windows key would be) and all of the keys you need for daily use. - -*FN keys:* Pause/play (F2), Stop (F3), Previous(F4), Next(F5), Music (F6), Mail (F7), Home (F8), Mute (F9), Vol- (F10), Vol+ (F11), Disable touchpad (F12), NumLock (Insert), Scroll Lock (Delete), PgUp (Up Arrow), PgDn (Down Arrow), Home (Left Arrow), End (Right Arrow), Digital Numpad (7,8,9,0,U,I,O,P,J,K,L,;,M,.,/) - diff --git a/content/documentation/PineTab/Keyboard.md b/content/documentation/PineTab/Keyboard.md new file mode 100644 index 00000000..dcbac94f --- /dev/null +++ b/content/documentation/PineTab/Keyboard.md @@ -0,0 +1,14 @@ +--- +title: "Keyboard" +draft: false +menu: + docs: + title: + parent: "PineTab" + identifier: "PineTab/Keyboard" + weight: 3 +--- + +**Overview:** The PineTab detachable keyboard features a full function row, FN key functionality, meta key (where the Windows key would be) and all of the keys you need for daily use. + +**FN keys:** Pause/play (F2), Stop (F3), Previous(F4), Next(F5), Music (F6), Mail (F7), Home (F8), Mute (F9), Vol- (F10), Vol+ (F11), Disable touchpad (F12), NumLock (Insert), Scroll Lock (Delete), PgUp (Up Arrow), PgDn (Down Arrow), Home (Left Arrow), End (Right Arrow), Digital Numpad (7,8,9,0,U,I,O,P,J,K,L,;,M,.,/) diff --git a/content/documentation/PineTab/Operating_systems.adoc b/content/documentation/PineTab/Operating_systems.adoc index 83922301..71e47fbe 100644 --- a/content/documentation/PineTab/Operating_systems.adoc +++ b/content/documentation/PineTab/Operating_systems.adoc @@ -6,7 +6,7 @@ menu: title: parent: "PineTab" identifier: "PineTab/Operating_systems" - weight: 2 + weight: 1 --- The PineTab will automatically boot from microSD if a bootable card is inserted. Although it is technically possible to use any ARM distro (because the PineTab uses the mainline kernel), only few of them will actually be usable on Early Adopters PineTab, due to specifics of working with LCD panel. Among those listed all except for postmarketOS have working builds. diff --git a/content/documentation/PineTab/Revisions/Early_adopters.adoc b/content/documentation/PineTab/Revisions/Early_adopter_edition.adoc similarity index 90% rename from content/documentation/PineTab/Revisions/Early_adopters.adoc rename to content/documentation/PineTab/Revisions/Early_adopter_edition.adoc index 9746ee13..dab18b28 100644 --- a/content/documentation/PineTab/Revisions/Early_adopters.adoc +++ b/content/documentation/PineTab/Revisions/Early_adopter_edition.adoc @@ -1,15 +1,17 @@ --- -title: "PineTab/Early-Adopter" +title: "Early Adopter Edition" draft: false +aliases: + - Early_adopters menu: docs: title: parent: "PineTab/Revisions" - identifier: "PineTab/Revisions/Early_adopters" + identifier: "PineTab/Revisions/Early_adopter_edition" weight: --- -The PineTab Early Adopter edition was the first hardware revision of the PineTab which shipped to customers. Shipping began on September 6, 2020. +The _Early Adopter Edition_ was the first hardware revision of the PineTab which shipped to customers. Shipping began on September 6, 2020. == Software @@ -69,15 +71,16 @@ If output is two lines with red word *disabled* under word *WIFI* - rejoice, sin nmcli radio wifi on -=== Wifi missing if started with keyboard attached +=== Wi-Fi missing if started with keyboard attached -UT [OS version: RC#6 (2020-W37)] +Operating system: Ubuntu Touch (OS version: RC#6 (2020-W37)) -symptom: if you started with keyboard attached wifi will not come up +Symptom: if you started with keyboard attached wifi will not come up -reason: the service urfkill is not running +Reason: the service urfkill is not running + +Fix: -fix: sudo service urfkill restart === Wifi radio reception is very weak diff --git a/content/documentation/PineTab/Tips_and_tricks.adoc b/content/documentation/PineTab/Tips_and_tricks.md similarity index 59% rename from content/documentation/PineTab/Tips_and_tricks.adoc rename to content/documentation/PineTab/Tips_and_tricks.md index 9db33955..acda7694 100644 --- a/content/documentation/PineTab/Tips_and_tricks.adoc +++ b/content/documentation/PineTab/Tips_and_tricks.md @@ -9,19 +9,18 @@ menu: weight: 4 --- -=== Reset +## Reset -If your PineTab is in unknown state or doesn't want to start: Press power button for 7-8s. It makes a sound and you know it's totally off. 3 seconds after, power button again for 2-3s and it will start to boot. +If your PineTab is in unknown state or doesn’t want to start: Press power button for 7-8s. It makes a sound and you know it’s totally off. 3 seconds after, power button again for 2-3s and it will start to boot. -=== Power Off While Charging +## Power Off While Charging When plugging your Pinetab into a charger, it automatically powers on. Use the above "Reset" instruction (holding the power button in for several seconds) to turn it off. This will allow your Pinetab to charge without being powered on. -=== Display rotated 90° on Arch ARM +## Display rotated 90° on Arch ARM With the following command you can turn the display to landscape: - echo 1 | sudo tee /sys/class/graphics/fbcon/rotate + echo 1 | sudo tee /sys/class/graphics/fbcon/rotate This command does not persist a reboot. - diff --git a/content/documentation/PineTab2/Further_information/Certifications.adoc b/content/documentation/PineTab2/Further_information/Certifications.adoc deleted file mode 100644 index 7bc487f0..00000000 --- a/content/documentation/PineTab2/Further_information/Certifications.adoc +++ /dev/null @@ -1,18 +0,0 @@ ---- -title: "Certifications" -draft: false -menu: - docs: - title: - parent: "PineTab2/Further_information" - identifier: "PineTab2/Further_information/Certifications" - weight: ---- - -PineTab2 certifications: - -* https://files.pine64.org/doc/cert/Pinetab2%20FCC-SDOC%20Certificate-LCSA040323223E.pdf[PineTab2 FCC Certificate] -* https://files.pine64.org/doc/cert/Pinetab2%20CE%20RED%20Certificate-LCSA040323224E.pdf[PineTab2 CE RED Certificate] -* https://files.pine64.org/doc/cert/PineTab2%20CE%20EMC%20Certificate-LCSA040323225E.pdf[PineTab2 CE EMC Certificate] -* https://files.pine64.org/doc/cert/PineTab2%20ROHS%20Report-LCSA040323221R.pdf[PineTab2 ROHS Test Report] -* https://files.pine64.org/doc/cert/PineTab2%20Keyboard%20CE%20EMC%20Certificate-LCSA062623001E.pdf[PineTab2/PineTab-V Detached Keyboard CE EMMC Certificate] \ No newline at end of file diff --git a/content/documentation/PineTab2/Further_information/Certifications.md b/content/documentation/PineTab2/Further_information/Certifications.md new file mode 100644 index 00000000..e6288773 --- /dev/null +++ b/content/documentation/PineTab2/Further_information/Certifications.md @@ -0,0 +1,18 @@ +--- +title: "Certifications" +draft: false +menu: + docs: + title: + parent: "PineTab2/Further_information" + identifier: "PineTab2/Further_information/Certifications" + weight: +--- + +PineTab2 certifications: + +* [PineTab2 FCC Certificate](https://files.pine64.org/doc/cert/Pinetab2%20FCC-SDOC%20Certificate-LCSA040323223E.pdf) +* [PineTab2 CE RED Certificate](https://files.pine64.org/doc/cert/Pinetab2%20CE%20RED%20Certificate-LCSA040323224E.pdf) +* [PineTab2 CE EMC Certificate](https://files.pine64.org/doc/cert/PineTab2%20CE%20EMC%20Certificate-LCSA040323225E.pdf) +* [PineTab2 ROHS Test Report](https://files.pine64.org/doc/cert/PineTab2%20ROHS%20Report-LCSA040323221R.pdf) +* [PineTab2/PineTab-V Detached Keyboard CE EMMC Certificate](https://files.pine64.org/doc/cert/PineTab2%20Keyboard%20CE%20EMC%20Certificate-LCSA062623001E.pdf) diff --git a/content/documentation/PineTab2/Further_information/Datasheets.adoc b/content/documentation/PineTab2/Further_information/Datasheets.adoc deleted file mode 100644 index 3ecf7504..00000000 --- a/content/documentation/PineTab2/Further_information/Datasheets.adoc +++ /dev/null @@ -1,16 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "PineTab2/Further_information" - identifier: "PineTab2/Further_information/Datasheets" - weight: ---- - -Rockchip RK3566 SoC information: - -* https://files.pine64.org/doc/quartz64/Rockchip%20RK3566%20Datasheet%20V1.0-20201210.pdf[Rockchip RK3566 ver 1.0 datasheet] -* https://opensource.rock-chips.com/images/2/26/Rockchip_RK3568_TRM_Part1_V1.3-20220930P.PDF[Rockchip RK3566 and RK3568 TRM (Technical Reference Manual)] - diff --git a/content/documentation/PineTab2/Further_information/Datasheets.md b/content/documentation/PineTab2/Further_information/Datasheets.md new file mode 100644 index 00000000..533b7398 --- /dev/null +++ b/content/documentation/PineTab2/Further_information/Datasheets.md @@ -0,0 +1,15 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "PineTab2/Further_information" + identifier: "PineTab2/Further_information/Datasheets" + weight: +--- + +Rockchip RK3566 SoC information: + +* [Rockchip RK3566 ver 1.0 datasheet](https://files.pine64.org/doc/quartz64/Rockchip%20RK3566%20Datasheet%20V1.0-20201210.pdf) +* [Rockchip RK3566 and RK3568 TRM (Technical Reference Manual)](https://opensource.rock-chips.com/images/2/26/Rockchip_RK3568_TRM_Part1_V1.3-20220930P.PDF) diff --git a/content/documentation/PineTab2/Further_information/Schematics.adoc b/content/documentation/PineTab2/Further_information/Schematics.adoc deleted file mode 100644 index c5f9a458..00000000 --- a/content/documentation/PineTab2/Further_information/Schematics.adoc +++ /dev/null @@ -1,17 +0,0 @@ ---- -title: "Schematics" -draft: false -menu: - docs: - title: - parent: "PineTab2/Further_information" - identifier: "PineTab2/Further_information/Schematics" - weight: ---- - -PineTab2 mainboard Schematics: - -* https://files.pine64.org/doc/PineTab/PineTab2_V2_schematic-20230417.pdf[PineTab2 mainboard Released Schematic-20230417 ver 2.0] -* https://files.pine64.org/doc/PineTab/PineTab2_V2_comp_ref_top-20230417.pdf[PineTab2 PCB Component Reference location v2.0 (top layer)] -* https://files.pine64.org/doc/PineTab/PineTab2_V2_comp_ref_bottom-20230417.pdf[PineTab2 PCB Component Reference location v2.0 (bottom layer)] -* https://files.pine64.org/doc/PineTab/pinetab2-V_uart_console_schematic-20221107.pdf[PineTab2/PineTab-V UART Dongle Schematic-20221107] \ No newline at end of file diff --git a/content/documentation/PineTab2/Further_information/Schematics.md b/content/documentation/PineTab2/Further_information/Schematics.md new file mode 100644 index 00000000..e6a528e3 --- /dev/null +++ b/content/documentation/PineTab2/Further_information/Schematics.md @@ -0,0 +1,17 @@ +--- +title: "Schematics" +draft: false +menu: + docs: + title: + parent: "PineTab2/Further_information" + identifier: "PineTab2/Further_information/Schematics" + weight: +--- + +PineTab2 mainboard Schematics: + +* [PineTab2 mainboard Released Schematic-20230417 ver 2.0](https://files.pine64.org/doc/PineTab/PineTab2_V2_schematic-20230417.pdf) +* [PineTab2 PCB Component Reference location v2.0 (top layer)](https://files.pine64.org/doc/PineTab/PineTab2_V2_comp_ref_top-20230417.pdf) +* [PineTab2 PCB Component Reference location v2.0 (bottom layer)](https://files.pine64.org/doc/PineTab/PineTab2_V2_comp_ref_bottom-20230417.pdf) +* [PineTab2/PineTab-V UART Dongle Schematic-20221107](https://files.pine64.org/doc/PineTab/pinetab2-V_uart_console_schematic-20221107.pdf) diff --git a/content/documentation/PineTab2/Further_information/Specifications.adoc b/content/documentation/PineTab2/Further_information/Specifications.adoc deleted file mode 100644 index bb2ab849..00000000 --- a/content/documentation/PineTab2/Further_information/Specifications.adoc +++ /dev/null @@ -1,55 +0,0 @@ ---- -title: "Specifications" -draft: false -menu: - docs: - title: - parent: "PineTab2/Further_information" - identifier: "PineTab2/Further_information/Specifications" - weight: ---- - -* *SoC:* Rockchip RK3566 -* *CPU:* 4x ARM Cortex-A55 @ 1.8 GHz -** 32KB L1 Instruction Cache and 32KB L1 Data Cache per core -** 512KB unified system L3 cache -** ARMv8 Cryptography Extensions -* *GPU:* Mali-G52 MP2 @ 800 MHz -** Supported by the open source 'Panfrost' driver in Linux and Mesa -** Supports OpenGL 3.1 and OpenGL ES 3.1 with many newer extensions -* *NPU:* 0.8 TOPS Neural Processing Unit -* *RAM:* 4GB or 8GB LPDDR4 -* *Storage:* -** 64GB or 128GB internal eMMC ([https://www.szyuda88.com/product-77313-276594.html SiliconGo SGM8 100C-S36BCG]; eMMC 5.1, up o 400MB/s) -** 1x MicroSD slot -* *Display:* 10.1" IPS LCD Resolution 1280x800 -* *Cameras:* -** Front: 2Mpx, chipset: Galaxycore GC02M2 -** Rear: 5Mpx, chipset: Omnivision OV5648 -* *Battery:* 6000 mAh (22.2Wh) -* *Buttons:* Power, volume up, volume down -* *Network:* -** Wi-Fi: BES2600 -*** Driver under development, use a USB wifi dongle for now -** Bluetooth: BES2600 -* *I/O:* -** 1x USB-C 3.0 (top, host mode only; power output up to 680mA) -** 1x USB-C 2.0 + PD (bottom, device mode by default; power input) -** 1x MicroHDMI -** 1x 4 pole 3.5mm audio jack (microphone right) and headphone detection -** 2x speakers + microphone (microphone left) -** 1x 5 pin (USB 2.0; <=680mA) Pogo connector for keyboard -** (PCIe on PCB as a flat flex ribbon connector, no room for M.2 NVMe drives in case) -* *Sensors:* -** Accelerometer: Silan SC7A20 -** Ambient Light & Proximity Sensor -* *Multimedia:* -** rkdjpeg: 1080p120 JPEG decode -** hantro: JPEG/VP8/H.264 encode, 1080p MPEG-2/H.263/VP8/H.264 AVC decode -** rkvdec2: 4K H.264 AVC Main10 L5.1/H.265 HEVC Main10 L5.1/VP9 Profile 0 and 2 L5.1 decode -** rkvenc2: 4K H.264 AVC/H.265 HEVC encode -* *Build:* Metal and Plastic -* *Dimensions:* 242x161x9mm -* *Weight:* 538g -* *Misc:* -** Protective cover with keyboard diff --git a/content/documentation/PineTab2/Further_information/Specifications.md b/content/documentation/PineTab2/Further_information/Specifications.md new file mode 100644 index 00000000..f4647f8f --- /dev/null +++ b/content/documentation/PineTab2/Further_information/Specifications.md @@ -0,0 +1,55 @@ +--- +title: "Specifications" +draft: false +menu: + docs: + title: + parent: "PineTab2/Further_information" + identifier: "PineTab2/Further_information/Specifications" + weight: +--- + +* **SoC:** Rockchip RK3566 +* **CPU:** 4x ARM Cortex-A55 @ 1.8 GHz + * 32KB L1 Instruction Cache and 32KB L1 Data Cache per core + * 512KB unified system L3 cache + * ARMv8 Cryptography Extensions +* **GPU:** Mali-G52 MP2 @ 800 MHz + * Supported by the open source 'Panfrost' driver in Linux and Mesa + * Supports OpenGL 3.1 and OpenGL ES 3.1 with many newer extensions +* **NPU:** 0.8 TOPS Neural Processing Unit +* **RAM:** 4GB or 8GB LPDDR4 +* **Storage:** + * 64GB or 128GB internal eMMC ([https://www.szyuda88.com/product-77313-276594.html SiliconGo SGM8 100C-S36BCG]; eMMC 5.1, up o 400MB/s) + * 1x MicroSD slot +* **Display:** 10.1" IPS LCD Resolution 1280x800 +* **Cameras:** + * Front: 2Mpx, chipset: Galaxycore GC02M2 + * Rear: 5Mpx, chipset: Omnivision OV5648 +* **Battery:** 6000 mAh (22.2Wh) +* **Buttons:** Power, volume up, volume down +* **Network:** + * Wi-Fi: BES2600 + * Driver under development, use a USB wifi dongle for now + * Bluetooth: BES2600 +* **I/O:** + * 1x USB-C 3.0 (top, host mode only; power output up to 680mA) + * 1x USB-C 2.0 + PD (bottom, device mode by default; power input) + * 1x MicroHDMI + * 1x 4 pole 3.5mm audio jack (microphone right) and headphone detection + * 2x speakers + microphone (microphone left) + * 1x 5 pin (USB 2.0; <=680mA) Pogo connector for keyboard + * (PCIe on PCB as a flat flex ribbon connector, no room for M.2 NVMe drives in case) +* **Sensors:** + * Accelerometer: Silan SC7A20 + * Ambient Light & Proximity Sensor +* **Multimedia:** + * rkdjpeg: 1080p120 JPEG decode + * hantro: JPEG/VP8/H.264 encode, 1080p MPEG-2/H.263/VP8/H.264 AVC decode + * rkvdec2: 4K H.264 AVC Main10 L5.1/H.265 HEVC Main10 L5.1/VP9 Profile 0 and 2 L5.1 decode + * rkvenc2: 4K H.264 AVC/H.265 HEVC encode +* **Build:** Metal and Plastic +* **Dimensions:** 242x161x9mm +* **Weight:** 538g +* **Misc:** + * Protective cover with keyboard diff --git a/content/documentation/PineTime/Further_information/Datasheets,_schematics_and_certifications.adoc b/content/documentation/PineTime/Further_information/Datasheets,_schematics_and_certifications.adoc deleted file mode 100644 index 76e72db9..00000000 --- a/content/documentation/PineTime/Further_information/Datasheets,_schematics_and_certifications.adoc +++ /dev/null @@ -1,68 +0,0 @@ ---- -title: "Datasheets, schematics and certifications" -draft: false -menu: - docs: - title: - parent: "PineTime/Further_information" - identifier: "PineTime/Further_information/Datasheets,_schematics_and_certifications" - weight: ---- - -== Schematics - -* https://files.pine64.org/doc/PineTime/PineTime%20Schematic-V1.0a-20191103.pdf[PineTime Schematic ver1.0a] -* https://files.pine64.org/doc/PineTime/PineTime%20Port%20Assignment%20rev1.0.pdf[PineTime GPIO Port Assignment ver1.0] - -NOTE: The part number for the SPI FLASH in the schematic diagram is not correct, the PineTime features a larger external FLASH device, see below. - -== Chip Datasheets - -NORDIC nRF52832 information: - -* https://files.pine64.org/doc/datasheet/pinetime/nRF52832%20product%20brief.pdf[nRF52832 Product Brief] -* https://infocenter.nordicsemi.com/pdf/nRF52832_PS_v1.4.pdf[nRF52832 Product Specification v1.4] - -ARMv7-M information: - -* https://developer.arm.com/documentation/ddi0403/ee/?lang=en[ARMv7-M Architecture Reference Manual] - -== Component Datasheets - -PMU (Power Management Unit) information: - -* https://files.pine64.org/doc/datasheet/pinetime/SGM40561.pdf[SGMicro SGM40561 Single Cell Charger Datasheet] -* https://files.pine64.org/doc/datasheet/pinetime/SGMICRO-SGM2036.pdf[SGMicro SGM2036 3.3V Low Power Low Dropout RF Linear Regulator Datasheet] - -SPI Flash information: - -* https://www.elnec.com/en/device/XTX/XT25F32B+%28QuadSPI%29+%5BSOP8-200%5D/[XTX XT25F32B 32Mb(4MB) SPI NOR Flash] (data sheets for this part are hard to find but it acts similar to other QuadSPI SPI NOR Flash such as https://www.macronix.com/Lists/Datasheet/Attachments/7426/MX25L3233F,%203V,%2032Mb,%20v1.6.pdf[Macronix 32Mb(4MB) SPI NOR Flash]) -* https://datasheet.lcsc.com/szlcsc/2005251035_XTX-XT25F32BSOIGU-S_C558851.pdf[XTX XT25F32B] -* IDs for XT25F32B are: manufacturer (0x0b), device (0x15), memory type (0x40), density (0x16) - -LCD Panel: - -* https://files.pine64.org/doc/datasheet/pinetime/PineTime%20LCD%20Panel.jpg[1.3" 240x240 IPS LCD Panel Specification for PineTime] -* https://wiki.pine64.org/images/5/54/ST7789V_v1.6.pdf[11.6" Sitronix LCD Driver/Controller Datasheet] - -Touchpad information: - -* https://files.pine64.org/doc/datasheet/pinetime/PineTime%20Touch%20Panel.jpg[Touchpad Specification for PineTimel] -* https://files.pine64.org/doc/datasheet/pinetime/CST816S数据手册V1.1.pdf[11.6" Hynitron CST816S Capacitive Touch Controller Datasheet in Chinese] -* https://wiki.pine64.org/images/2/2f/CST816S.zip[Touch Controller Datasheet en] - -Sensor: - -* https://datasheet.lcsc.com/lcsc/1912111437_Bosch-Sensortec-BMA425_C437656.pdf[BOSCH BMA425 Triaxial Acceleration Sensor Datasheet on current PineTime device] -* https://files.pine64.org/doc/datasheet/pinetime/BST-BMA421-FL000.pdf[BOSCH BMA421 Triaxial Acceleration Sensor Product Brief on early PineTime device] -* https://files.pine64.org/doc/datasheet/pinetime/HRS3300%20Heart%20Rate%20Sensor.pdf[TianYiHeXin HRS3300 PPG Heart Rate Sensor Data Sheet] - -== Certificates - -* https://files.pine64.org/doc/cert/FCC_Grant_PineTime_2AWAG-PINETIME_DTS.pdf[PineTime FCC Certificate] -* https://files.pine64.org/doc/cert/CTL2203033031-W%20RED%20Certificate.pdf[PineTime CE Certificate] - -== Manuals - -* https://wiki.pine64.org/wiki/File:PineTime Quick Start Guide.pdf[PineTime Quick Start Guide] - diff --git a/content/documentation/PineTime/Further_information/Datasheets,_schematics_and_certifications.md b/content/documentation/PineTime/Further_information/Datasheets,_schematics_and_certifications.md new file mode 100644 index 00000000..143bc905 --- /dev/null +++ b/content/documentation/PineTime/Further_information/Datasheets,_schematics_and_certifications.md @@ -0,0 +1,68 @@ +--- +title: "Datasheets, schematics and certifications" +draft: false +menu: + docs: + title: + parent: "PineTime/Further_information" + identifier: "PineTime/Further_information/Datasheets,_schematics_and_certifications" + weight: +--- + +## Schematics + +* [PineTime Schematic ver1.0a](https://files.pine64.org/doc/PineTime/PineTime%20Schematic-V1.0a-20191103.pdf) +* [PineTime GPIO Port Assignment ver1.0](https://files.pine64.org/doc/PineTime/PineTime%20Port%20Assignment%20rev1.0.pdf) + +**📌 NOTE**\ +The part number for the SPI FLASH in the schematic diagram is not correct, the PineTime features a larger external FLASH device, see below. + +## Chip Datasheets + +NORDIC nRF52832 information: + +* [nRF52832 Product Brief](https://files.pine64.org/doc/datasheet/pinetime/nRF52832%20product%20brief.pdf) +* [nRF52832 Product Specification v1.4](https://infocenter.nordicsemi.com/pdf/nRF52832_PS_v1.4.pdf) + +ARMv7-M information: + +* [ARMv7-M Architecture Reference Manual](https://developer.arm.com/documentation/ddi0403/ee/?lang=en) + +## Component Datasheets + +PMU (Power Management Unit) information: + +* [SGMicro SGM40561 Single Cell Charger Datasheet](https://files.pine64.org/doc/datasheet/pinetime/SGM40561.pdf) +* [SGMicro SGM2036 3.3V Low Power Low Dropout RF Linear Regulator Datasheet](https://files.pine64.org/doc/datasheet/pinetime/SGMICRO-SGM2036.pdf) + +SPI Flash information: + +* [XTX XT25F32B 32Mb(4MB) SPI NOR Flash](https://www.elnec.com/en/device/XTX/XT25F32B+%28QuadSPI%29+%5BSOP8-200%5D/) (data sheets for this part are hard to find but it acts similar to other QuadSPI SPI NOR Flash such as [Macronix 32Mb(4MB) SPI NOR Flash](https://www.macronix.com/Lists/Datasheet/Attachments/7426/MX25L3233F,%203V,%2032Mb,%20v1.6.pdf)) +* [XTX XT25F32B](https://datasheet.lcsc.com/szlcsc/2005251035_XTX-XT25F32BSOIGU-S_C558851.pdf) +* IDs for XT25F32B are: manufacturer (0x0b), device (0x15), memory type (0x40), density (0x16) + +LCD Panel: + +* [1.3" 240x240 IPS LCD Panel Specification for PineTime](https://files.pine64.org/doc/datasheet/pinetime/PineTime%20LCD%20Panel.jpg) +* [11.6" Sitronix LCD Driver/Controller Datasheet](https://wiki.pine64.org/images/5/54/ST7789V_v1.6.pdf) + +Touchpad information: + +* [Touchpad Specification for PineTimel](https://files.pine64.org/doc/datasheet/pinetime/PineTime%20Touch%20Panel.jpg) +* [11.6" Hynitron CST816S Capacitive Touch Controller Datasheet in Chinese](https://files.pine64.org/doc/datasheet/pinetime/CST816S数据手册V1.1.pdf) +* [Touch Controller Datasheet en](https://wiki.pine64.org/images/2/2f/CST816S.zip) + +Sensor: + +* [BOSCH BMA425 Triaxial Acceleration Sensor Datasheet on current PineTime device](https://datasheet.lcsc.com/lcsc/1912111437_Bosch-Sensortec-BMA425_C437656.pdf) +* [BOSCH BMA421 Triaxial Acceleration Sensor Product Brief on early PineTime device](https://files.pine64.org/doc/datasheet/pinetime/BST-BMA421-FL000.pdf) +* [TianYiHeXin HRS3300 PPG Heart Rate Sensor Data Sheet](https://files.pine64.org/doc/datasheet/pinetime/HRS3300%20Heart%20Rate%20Sensor.pdf) + +## Certificates + +* [PineTime FCC Certificate](https://files.pine64.org/doc/cert/FCC_Grant_PineTime_2AWAG-PINETIME_DTS.pdf) +* [PineTime CE Certificate](https://files.pine64.org/doc/cert/CTL2203033031-W%20RED%20Certificate.pdf) + +## Manuals + +* https://wiki.pine64.org/wiki/File:PineTime Quick Start Guide.pdf[PineTime Quick Start Guide] diff --git a/content/documentation/PineTime/Further_information/Specifications.adoc b/content/documentation/PineTime/Further_information/Specifications.adoc deleted file mode 100644 index 62505eb9..00000000 --- a/content/documentation/PineTime/Further_information/Specifications.adoc +++ /dev/null @@ -1,27 +0,0 @@ ---- -title: "Specifications" -draft: false -menu: - docs: - title: - parent: "PineTime/Further_information" - identifier: "PineTime/Further_information/Specifications" - weight: ---- - -* *Dimensions:* 37.5 x 40 x 11mm -* *Weight:* 38 grams -* *IP Rating:* IP67 (waterproof to 1 meter (sealed edition)) -* *Display:* -** *Size:* 1.3 inches (33mm) diagonal -** *Type:* IPS capacitive touchscreen, RGB 65K colors -** *Display Controller:* ST7789 -** *Resolution:* 240x240 pixels -* *System on Chip:* Nordic Semiconductor nRF52832 -* *Flash:* 512KB with additional 4MB SPI NOR -* *RAM:* 64KB -* *Bluetooth:* link:/documentation/PineTime/Software/Bluetooth[5.0 (including Bluetooth Low Energy)] -* *Sensors:* Accelerometer, Heart rate sensor -* *Feedback:* Vibration motor -* *Battery:* 170-180mAh 3.8V LiPo - diff --git a/content/documentation/PineTime/Further_information/Specifications.md b/content/documentation/PineTime/Further_information/Specifications.md new file mode 100644 index 00000000..12f21afb --- /dev/null +++ b/content/documentation/PineTime/Further_information/Specifications.md @@ -0,0 +1,26 @@ +--- +title: "Specifications" +draft: false +menu: + docs: + title: + parent: "PineTime/Further_information" + identifier: "PineTime/Further_information/Specifications" + weight: +--- + +* **Dimensions:** 37.5 x 40 x 11mm +* **Weight:** 38 grams +* **IP Rating:** IP67 (waterproof to 1 meter (sealed edition)) +* **Display:** + * **Size:** 1.3 inches (33mm) diagonal + * **Type:** IPS capacitive touchscreen, RGB 65K colors + * **Display Controller:** ST7789 + * **Resolution:** 240x240 pixels +* **System on Chip:** Nordic Semiconductor nRF52832 +* **Flash:** 512KB with additional 4MB SPI NOR +* **RAM:** 64KB +* **Bluetooth:** [5.0 (including Bluetooth Low Energy)](/documentation/PineTime/Software/Bluetooth) +* **Sensors:** Accelerometer, Heart rate sensor +* **Feedback:** Vibration motor +* **Battery:** 170-180mAh 3.8V LiPo diff --git a/content/documentation/Pine_A64-LTS/Further_information/Datasheets.adoc b/content/documentation/Pine_A64-LTS/Further_information/Datasheets.adoc deleted file mode 100644 index 5141d4e7..00000000 --- a/content/documentation/Pine_A64-LTS/Further_information/Datasheets.adoc +++ /dev/null @@ -1,90 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "Pine_A64-LTS/Further_information" - identifier: "Pine_A64-LTS/Further_information/Datasheets" - weight: ---- - -Allwinner A64/R18 SoC information: - -* https://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf[Allwinner A64 SoC Brief Introduction] -* https://files.pine64.org/doc/datasheet/pine64/Allwinner-R18-Brief%20Sheet.pdf[Allwinner R18 SoC Brief Introduction] -* https://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf[Allwinner A64/R18 SoC Data Sheet V1.1 (Official Released Version)] -* https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf[Allwinner A64/R18 SoC User Manual V1.0 (Official Release Version)] - -X-Powers AXP803 PMU (Power Management Unit) information: - -* https://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf[AXP803 PMIC Datasheet] - -LPDDR3 information: - -* https://files.pine64.org/doc/datasheet/pine64/AWL3A1632_mobile_lpddr3_1600Mbps.pdf[Allwinner LPDDR3 Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/FORESEE%20178ball%2012x11.5%20LPDDR3%2016G%20Spec%20V1.0-1228.pdf[Foresee LPDDR3 Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/K4E6E304EE-EGCE.pdf[Samsung LPDDR3 Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/LPDDR3%20178ball%208Gb_H9CCNNN8JTALAR_Rev1.0.pdf[Hynix LPDDR3 Datasheet] - -eMMC information: - -* https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf[PINE64 eMMC module schematic] -* https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf[PINE64 USB adapter for eMMC module V2 schematic] -* https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar[PINE64 USB adapter for eMMC module PCB in JPEG] -* https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf[16GB Foresee eMMC Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf[32GB/64GB/128GB SanDisk eMMC Datasheet] - -SPI NOR Flash information: - -* https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf[WinBond 128Mb SPI Flash Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf[GigaDevice 128Mb SPI Flash Datasheet] - -== Related to the PINE A64-LTS - -5MPixel CMOS Camera module information: - -* https://files.pine64.org/doc/datasheet/pine64/YL-PINE64-4EC.pdf[PINE64 YL-PINE64-4EC 5M Pixel CMOS Image Sensor Module (Description in Chinese)] -* https://files.pine64.org/doc/datasheet/pine64/S5K4EC%205M%208%205X8%205%20PLCC%20%20Data%20Sheet_V1.0.pdf[S5K4EC 5MP CMOS Image Sensor SoC Module Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/S5K4ECGX_EVT1_DataSheet_R005_20100816.pdf[S5K4EC 5MP CMOS Image Sensor SoC Chip Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/s5k4ec.c[S5K4EC 5MP CMOS Image Sensor Driver Source Code in C language] - -Early version Camera module information: - -* https://files.pine64.org/doc/datasheet/pine64/D116-A64_Bonsen_cmos_camera.pdf[Bonsen Kexin V118-A64-GC2145-HM5065 CMOS Image Sensor Module] -* https://files.pine64.org/doc/datasheet/pine64/HM5065-DS-V03.pdf[HiMax 5MP CMOS Image Sensor SoC] - -LCD Touch Screen Panel information: - -* https://files.pine64.org/doc/datasheet/pine64/FY07024DI26A30-D_feiyang_LCD_panel.pdf[7.0" 1200x600 TFT-LCD Panel Specification] -* https://files.pine64.org/doc/datasheet/pine64/HK70DR2459-PG-V01.pdf[Touch Panel Specification] -* https://files.pine64.org/doc/datasheet/pine64/GT911%20Capacitive%20Touch%20Controller%20Datasheet.pdf[GOODiX GT911 5-Point Capacitive Touch Controller Datasheet] - -Lithium Battery information: - -* https://files.pine64.org/doc/datasheet/pine64/9070120P%203.7V%208000MAH.pdf[8000mAH Lithium Battery Specification] - -Ethernet PHY information: - -* https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf[Realtek RTL8211 10/100/1000M Ethernet Transceiver for PINE A64-LTS Board and SOPINE Baseboard] - -Wifi/BT module information: - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf[PINE A64 Wifi/BT Module Schematic] -* https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf[Realtek RTL8723BS WiFi with BT SDIO] - -Enclosure information: - -* https://files.pine64.org/doc/datasheet/case/playbox_enclosure_20160426.stp[Playbox Enclosure 3D file] -* https://files.pine64.org/doc/datasheet/case/ABS_enclosure_20160426.stp[ABS Enclosure 3D file] -* https://files.pine64.org/doc/datasheet/case/pine64%20Die%20Cast%20casing-final.jpg[Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing] - -Connector information: - -* https://files.pine64.org/doc/datasheet/pine64/ePH.pdf[2.0mm PH Type connector specification use in Lithium Battery (VBAT) port and RTC Battery port] -* https://files.pine64.org/doc/datasheet/pine64/0.5FPC%20Front%20Open%20Connector%20H=1.5.pdf[0.5mm Pitch cover type FPC connector specification use in DSI port, TP port and CSI port] - -Remote control button mapping: - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg[Official Remote Control for the PINE A64 Button Mapping] - diff --git a/content/documentation/Pine_A64-LTS/Further_information/Datasheets.md b/content/documentation/Pine_A64-LTS/Further_information/Datasheets.md new file mode 100644 index 00000000..51b26524 --- /dev/null +++ b/content/documentation/Pine_A64-LTS/Further_information/Datasheets.md @@ -0,0 +1,89 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "Pine_A64-LTS/Further_information" + identifier: "Pine_A64-LTS/Further_information/Datasheets" + weight: +--- + +Allwinner A64/R18 SoC information: + +* [Allwinner A64 SoC Brief Introduction](https://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf) +* [Allwinner R18 SoC Brief Introduction](https://files.pine64.org/doc/datasheet/pine64/Allwinner-R18-Brief%20Sheet.pdf) +* [Allwinner A64/R18 SoC Data Sheet V1.1 (Official Released Version)](https://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf) +* [Allwinner A64/R18 SoC User Manual V1.0 (Official Release Version)](https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf) + +X-Powers AXP803 PMU (Power Management Unit) information: + +* [AXP803 PMIC Datasheet](https://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf) + +LPDDR3 information: + +* [Allwinner LPDDR3 Datasheet](https://files.pine64.org/doc/datasheet/pine64/AWL3A1632_mobile_lpddr3_1600Mbps.pdf) +* [Foresee LPDDR3 Datasheet](https://files.pine64.org/doc/datasheet/pine64/FORESEE%20178ball%2012x11.5%20LPDDR3%2016G%20Spec%20V1.0-1228.pdf) +* [Samsung LPDDR3 Datasheet](https://files.pine64.org/doc/datasheet/pine64/K4E6E304EE-EGCE.pdf) +* [Hynix LPDDR3 Datasheet](https://files.pine64.org/doc/datasheet/pine64/LPDDR3%20178ball%208Gb_H9CCNNN8JTALAR_Rev1.0.pdf) + +eMMC information: + +* [PINE64 eMMC module schematic](https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf) +* [PINE64 USB adapter for eMMC module V2 schematic](https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf) +* [PINE64 USB adapter for eMMC module PCB in JPEG](https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar) +* [16GB Foresee eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf) +* [32GB/64GB/128GB SanDisk eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf) + +SPI NOR Flash information: + +* [WinBond 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf) +* [GigaDevice 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf) + +## Related to the PINE A64-LTS + +5MPixel CMOS Camera module information: + +* [PINE64 YL-PINE64-4EC 5M Pixel CMOS Image Sensor Module (Description in Chinese)](https://files.pine64.org/doc/datasheet/pine64/YL-PINE64-4EC.pdf) +* [S5K4EC 5MP CMOS Image Sensor SoC Module Datasheet](https://files.pine64.org/doc/datasheet/pine64/S5K4EC%205M%208%205X8%205%20PLCC%20%20Data%20Sheet_V1.0.pdf) +* [S5K4EC 5MP CMOS Image Sensor SoC Chip Datasheet](https://files.pine64.org/doc/datasheet/pine64/S5K4ECGX_EVT1_DataSheet_R005_20100816.pdf) +* [S5K4EC 5MP CMOS Image Sensor Driver Source Code in C language](https://files.pine64.org/doc/datasheet/pine64/s5k4ec.c) + +Early version Camera module information: + +* [Bonsen Kexin V118-A64-GC2145-HM5065 CMOS Image Sensor Module](https://files.pine64.org/doc/datasheet/pine64/D116-A64_Bonsen_cmos_camera.pdf) +* [HiMax 5MP CMOS Image Sensor SoC](https://files.pine64.org/doc/datasheet/pine64/HM5065-DS-V03.pdf) + +LCD Touch Screen Panel information: + +* [7.0" 1200x600 TFT-LCD Panel Specification](https://files.pine64.org/doc/datasheet/pine64/FY07024DI26A30-D_feiyang_LCD_panel.pdf) +* [Touch Panel Specification](https://files.pine64.org/doc/datasheet/pine64/HK70DR2459-PG-V01.pdf) +* [GOODiX GT911 5-Point Capacitive Touch Controller Datasheet](https://files.pine64.org/doc/datasheet/pine64/GT911%20Capacitive%20Touch%20Controller%20Datasheet.pdf) + +Lithium Battery information: + +* [8000mAH Lithium Battery Specification](https://files.pine64.org/doc/datasheet/pine64/9070120P%203.7V%208000MAH.pdf) + +Ethernet PHY information: + +* [Realtek RTL8211 10/100/1000M Ethernet Transceiver for PINE A64-LTS Board and SOPINE Baseboard](https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf) + +Wifi/BT module information: + +* [PINE A64 Wifi/BT Module Schematic](https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf) +* [Realtek RTL8723BS WiFi with BT SDIO](https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf) + +Enclosure information: + +* [Playbox Enclosure 3D file](https://files.pine64.org/doc/datasheet/case/playbox_enclosure_20160426.stp) +* [ABS Enclosure 3D file](https://files.pine64.org/doc/datasheet/case/ABS_enclosure_20160426.stp) +* [Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing](https://files.pine64.org/doc/datasheet/case/pine64%20Die%20Cast%20casing-final.jpg) + +Connector information: + +* [2.0mm PH Type connector specification use in Lithium Battery (VBAT) port and RTC Battery port](https://files.pine64.org/doc/datasheet/pine64/ePH.pdf) +* [0.5mm Pitch cover type FPC connector specification use in DSI port, TP port and CSI port](https://files.pine64.org/doc/datasheet/pine64/0.5FPC%20Front%20Open%20Connector%20H=1.5.pdf) + +Remote control button mapping: + +* [Official Remote Control for the PINE A64 Button Mapping](https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg) diff --git a/content/documentation/Pine_A64-LTS/Further_information/Other_resources.adoc b/content/documentation/Pine_A64-LTS/Further_information/Other_resources.adoc deleted file mode 100644 index 8a1f1473..00000000 --- a/content/documentation/Pine_A64-LTS/Further_information/Other_resources.adoc +++ /dev/null @@ -1,26 +0,0 @@ ---- -title: "Other resources" -draft: false -menu: - docs: - title: - parent: "Pine_A64-LTS/Further_information" - identifier: "Pine_A64-LTS/Further_information/Other_resources" - weight: ---- - -* http://web.archive.org/web/20230501084346/https://synfare.com/599N105E/hwdocs/pine64/index.html[Good documentation about PINE A64, A64+, and A64-LTS GPIO pins article] -* https://linux-sunxi.org/Pine64#Manufacturer_images[Linux Sunxi Wiki page on PINE A64] -* https://github.com/umiddelb/z2d/tree/master/pine64[Collection of scripts to set up a minimal Xenial 14.04.3 / Debian 8 Jessie root filesystem Contributed By Uli Middelberg] -* https://github.com/apritzel/pine64[Linux Image created by Andre Przywara] -* https://blog.hypriot.com/post/the-pine-a64-is-about-to-become=the-cheapest-ARM-64-bit-platform-to-run-Docker/[PINE A64 with HypriotOS by Dieter and Govinda] -* https://sosfakeflash.wordpress.com/2008/09/02/h2testw-14-gold-standard-in-detecting-usb-counterfeit-drives/comment-page-3/#comment-9861[H2testw 1.4 – Gold Standard In Detecting USB Counterfeit Drives] -* https://oss.digirati.com.br/f3/[F3 - an alternative to h2testw] -* https://www.phoronix.com/scan.php?page=article&item=pine-64-benchmark&num=1[Benchmarking The Low-Cost PINE 64+ ARM Single Board Computer by Michael Larabel] -* https://github.com/longsleep/build-pine64-image[PINE64 Linux build scripts, tools and instructions by Longsleep] -* https://www.stdin.xyz/downloads/people/longsleep/pine64-images/[PINE64 Linux image by Longsleep] -* https://www.youtube.com/playlist?list=PLgj96wTPcMKffRm_Sk6673Nfy_I6b5UJW[A series of Youtube video on PINE A64 Developers Board by Michael Larson] -* https://rayhightower.com/blog/2016/04/04/pine64-quick-start-guide-using-mac-os-x/[PINE64 Quick Start Guide (with Gotchas)] -* https://softwarebakery.com/shrinking-images-on-linux[Shrinking images on Linux by FrozenCow] -* https://gitlab.manjaro.org/packages/community/manjaro-arm-installer[Manjaro Arm installation script] - diff --git a/content/documentation/Pine_A64-LTS/Further_information/Other_resources.md b/content/documentation/Pine_A64-LTS/Further_information/Other_resources.md new file mode 100644 index 00000000..55310946 --- /dev/null +++ b/content/documentation/Pine_A64-LTS/Further_information/Other_resources.md @@ -0,0 +1,25 @@ +--- +title: "Other resources" +draft: false +menu: + docs: + title: + parent: "Pine_A64-LTS/Further_information" + identifier: "Pine_A64-LTS/Further_information/Other_resources" + weight: +--- + +* [Good documentation about PINE A64, A64+, and A64-LTS GPIO pins article](http://web.archive.org/web/20230501084346/https://synfare.com/599N105E/hwdocs/pine64/index.html) +* [Linux Sunxi Wiki page on PINE A64](https://linux-sunxi.org/Pine64#Manufacturer_images) +* [Collection of scripts to set up a minimal Xenial 14.04.3 / Debian 8 Jessie root filesystem Contributed By Uli Middelberg](https://github.com/umiddelb/z2d/tree/master/pine64) +* [Linux Image created by Andre Przywara](https://github.com/apritzel/pine64) +* [PINE A64 with HypriotOS by Dieter and Govinda](https://blog.hypriot.com/post/the-pine-a64-is-about-to-become=the-cheapest-ARM-64-bit-platform-to-run-Docker/) +* [H2testw 1.4 – Gold Standard In Detecting USB Counterfeit Drives](https://sosfakeflash.wordpress.com/2008/09/02/h2testw-14-gold-standard-in-detecting-usb-counterfeit-drives/comment-page-3/#comment-9861) +* [F3 - an alternative to h2testw](https://oss.digirati.com.br/f3/) +* [Benchmarking The Low-Cost PINE 64+ ARM Single Board Computer by Michael Larabel](https://www.phoronix.com/scan.php?page=article&item=pine-64-benchmark&num=1) +* [PINE64 Linux build scripts, tools and instructions by Longsleep](https://github.com/longsleep/build-pine64-image) +* [PINE64 Linux image by Longsleep](https://www.stdin.xyz/downloads/people/longsleep/pine64-images/) +* [A series of Youtube video on PINE A64 Developers Board by Michael Larson](https://www.youtube.com/playlist?list=PLgj96wTPcMKffRm_Sk6673Nfy_I6b5UJW) +* [PINE64 Quick Start Guide (with Gotchas)](https://rayhightower.com/blog/2016/04/04/pine64-quick-start-guide-using-mac-os-x/) +* [Shrinking images on Linux by FrozenCow](https://softwarebakery.com/shrinking-images-on-linux) +* [Manjaro Arm installation script](https://gitlab.manjaro.org/packages/community/manjaro-arm-installer) diff --git a/content/documentation/Pine_A64-LTS/Further_information/Schematics_and_certifications.adoc b/content/documentation/Pine_A64-LTS/Further_information/Schematics_and_certifications.adoc deleted file mode 100644 index ba8d7541..00000000 --- a/content/documentation/Pine_A64-LTS/Further_information/Schematics_and_certifications.adoc +++ /dev/null @@ -1,28 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "Pine_A64-LTS/Further_information" - identifier: "Pine_A64-LTS/Further_information/Schematics_and_certifications" - weight: ---- - -* Model "A" Baseboard Dimensions: 133mm x 80mm x 19mm - -Input Power: DC 5V @ 2A, 3.7V Li-Ion battery connector, 3.5OD/1.35ID Barrel DC Jack connector, Euler connector - -Schematics: - -* https://forum.pine64.org/showthread.php?tid=8058[a PDF mapping the pins from the A64 chip itself, to the gold-fingers on the SO-DIMM edge, to the multiple connectors on the baseboard and on the clusterboard, attached to this forum post.] -* https://files.pine64.org/doc/Pine%20A64%20Schematic/Pine%20A64%20Pin%20Assignment%20160119.pdf[PINE A64 Pi-2/Eular/Ext Bus/Wifi Bus Connector Pin Assignment (Updated 15/Feb/2016)] - -Pine A64-LTS schematic: - -* https://files.pine64.org/doc/SOPINE-A64/PINE%20A64-TLS-20180130.pdf[Pine A64-LTS Schematic] - -Pine A64-LTS V2 schematic: - -* https://wiki.pine64.org/wiki/File:PINE64-TLS-V2_0-SCH-2021-05-12.pdf[Pine A64-LTS V2 Schematic] - diff --git a/content/documentation/Pine_A64-LTS/Further_information/Schematics_and_certifications.md b/content/documentation/Pine_A64-LTS/Further_information/Schematics_and_certifications.md new file mode 100644 index 00000000..b69debd9 --- /dev/null +++ b/content/documentation/Pine_A64-LTS/Further_information/Schematics_and_certifications.md @@ -0,0 +1,27 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "Pine_A64-LTS/Further_information" + identifier: "Pine_A64-LTS/Further_information/Schematics_and_certifications" + weight: +--- + +* Model "A" Baseboard Dimensions: 133mm x 80mm x 19mm + +Input Power: DC 5V @ 2A, 3.7V Li-Ion battery connector, 3.5OD/1.35ID Barrel DC Jack connector, Euler connector + +Schematics: + +* [a PDF mapping the pins from the A64 chip itself, to the gold-fingers on the SO-DIMM edge, to the multiple connectors on the baseboard and on the clusterboard, attached to this forum post.](https://forum.pine64.org/showthread.php?tid=8058) +* [PINE A64 Pi-2/Eular/Ext Bus/Wifi Bus Connector Pin Assignment (Updated 15/Feb/2016)](https://files.pine64.org/doc/Pine%20A64%20Schematic/Pine%20A64%20Pin%20Assignment%20160119.pdf) + +Pine A64-LTS schematic: + +* [Pine A64-LTS Schematic](https://files.pine64.org/doc/SOPINE-A64/PINE%20A64-TLS-20180130.pdf) + +Pine A64-LTS V2 schematic: + +* [Pine A64-LTS V2 Schematic](https://wiki.pine64.org/wiki/File:PINE64-TLS-V2_0-SCH-2021-05-12.pdf) diff --git a/content/documentation/Pine_A64/Accessories.adoc b/content/documentation/Pine_A64/Accessories.md similarity index 59% rename from content/documentation/Pine_A64/Accessories.adoc rename to content/documentation/Pine_A64/Accessories.md index 3ff073d1..8585bf83 100644 --- a/content/documentation/Pine_A64/Accessories.adoc +++ b/content/documentation/Pine_A64/Accessories.md @@ -9,11 +9,11 @@ menu: weight: 3 --- -Under link:/documentation/Accessories/Accessories_Step_by_Step_Guides[Accessories Step by Step Guides] you can find instructions and guides pertaining to: +Under [Accessories Step by Step Guides](/documentation/Accessories/Accessories_Step_by_Step_Guides) you can find instructions and guides pertaining to: * Enclosures * Bluetooth and WiFi module * Real Time Clock (RTC) battery * Real Time Clock (RTC) battery holder * First and third party cases -* Featured 3D printed cases (and more). \ No newline at end of file +* Featured 3D printed cases (and more). diff --git a/content/documentation/Pine_A64/Further_information/Datasheets.adoc b/content/documentation/Pine_A64/Further_information/Datasheets.adoc deleted file mode 100644 index 6dc7c9a8..00000000 --- a/content/documentation/Pine_A64/Further_information/Datasheets.adoc +++ /dev/null @@ -1,70 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "Pine_A64/Further_information" - identifier: "Pine_A64/Further_information/Datasheets" - weight: ---- - -Allwinner A64 SoC information: - -* https://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf[Allwinner A64 SoC Brief Introduction] -* https://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf[Allwinner A64 SoC Data Sheet V1.1 (Official Released Version)] -* https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf[Allwinner A64 SoC User Manual V1.0 (Official Release Version)] - -X-Powers AXP803 PMU (Power Management Unit) information: - -* https://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf[AXP803 PMIC Datasheet] - -== Related to the PINE A64 - -5MPixel CMOS Camera module information: - -* https://files.pine64.org/doc/datasheet/pine64/YL-PINE64-4EC.pdf[PINE64 YL-PINE64-4EC 5M Pixel CMOS Image Sensor Module (Description in Chinese)] -* https://files.pine64.org/doc/datasheet/pine64/S5K4EC%205M%208%205X8%205%20PLCC%20%20Data%20Sheet_V1.0.pdf[S5K4EC 5MP CMOS Image Sensor SoC Module Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/S5K4ECGX_EVT1_DataSheet_R005_20100816.pdf[S5K4EC 5MP CMOS Image Sensor SoC Chip Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/s5k4ec.c[S5K4EC 5MP CMOS Image Sensor Driver Source Code in C language] - -Early version Camera module information: - -* https://files.pine64.org/doc/datasheet/pine64/D116-A64_Bonsen_cmos_camera.pdf[Bonsen Kexin V118-A64-GC2145-HM5065 CMOS Image Sensor Module] -* https://files.pine64.org/doc/datasheet/pine64/HM5065-DS-V03.pdf[HiMax 5MP CMOS Image Sensor SoC] - -LCD Touch Screen Panel information: - -* https://files.pine64.org/doc/datasheet/pine64/FY07024DI26A30-D_feiyang_LCD_panel.pdf[7.0" 1200x600 TFT-LCD Panel Specification] -* https://files.pine64.org/doc/datasheet/pine64/HK70DR2459-PG-V01.pdf[Touch Panel Specification] -* https://files.pine64.org/doc/datasheet/pine64/GT911%20Capacitive%20Touch%20Controller%20Datasheet.pdf[GOODiX GT911 5-Point Capacitive Touch Controller Datasheet] - -Lithium Battery information: - -* https://files.pine64.org/doc/datasheet/pine64/9070120P%203.7V%208000MAH.pdf[8000mAH Lithium Battery Specification] - -Ethernet PHY information: - -* https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf[Realtek RTL8211 10/100/1000M Ethernet Transceiver for PINE A64+ Board] -* https://files.pine64.org/doc/datasheet/pine64/rtl8201cp.pdf[Realtek RTL8201 10/100M Ethernet Transceiver for PINE A64 Board] - -Wifi/BT module information: - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf[PINE A64 Wifi/BT Module Schematic] -* https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf[Realtek RTL8723BS WiFi with BT SDIO] - -Enclosure information: - -* https://files.pine64.org/doc/datasheet/case/playbox_enclosure_20160426.stp[Playbox Enclosure 3D file] -* https://files.pine64.org/doc/datasheet/case/ABS_enclosure_20160426.stp[ABS Enclosure 3D file] -* https://files.pine64.org/doc/datasheet/case/pine64%20Die%20Cast%20casing-final.jpg[Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing] - -Connector information: - -* https://files.pine64.org/doc/datasheet/pine64/ePH.pdf[2.0mm PH Type connector specification use in Lithium Battery (VBAT) port and RTC Battery port] -* https://files.pine64.org/doc/datasheet/pine64/0.5FPC%20Front%20Open%20Connector%20H=1.5.pdf[0.5mm Pitch cover type FPC connector specification use in DSI port, TP port and CSI port] - -Remote control button mapping: - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg[Official Remote Control for the PINE A64 Button Mapping] - diff --git a/content/documentation/Pine_A64/Further_information/Datasheets.md b/content/documentation/Pine_A64/Further_information/Datasheets.md new file mode 100644 index 00000000..83ebdde4 --- /dev/null +++ b/content/documentation/Pine_A64/Further_information/Datasheets.md @@ -0,0 +1,69 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "Pine_A64/Further_information" + identifier: "Pine_A64/Further_information/Datasheets" + weight: +--- + +Allwinner A64 SoC information: + +* [Allwinner A64 SoC Brief Introduction](https://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf) +* [Allwinner A64 SoC Data Sheet V1.1 (Official Released Version)](https://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf) +* [Allwinner A64 SoC User Manual V1.0 (Official Release Version)](https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf) + +X-Powers AXP803 PMU (Power Management Unit) information: + +* [AXP803 PMIC Datasheet](https://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf) + +## Related to the PINE A64 + +5MPixel CMOS Camera module information: + +* [PINE64 YL-PINE64-4EC 5M Pixel CMOS Image Sensor Module (Description in Chinese)](https://files.pine64.org/doc/datasheet/pine64/YL-PINE64-4EC.pdf) +* [S5K4EC 5MP CMOS Image Sensor SoC Module Datasheet](https://files.pine64.org/doc/datasheet/pine64/S5K4EC%205M%208%205X8%205%20PLCC%20%20Data%20Sheet_V1.0.pdf) +* [S5K4EC 5MP CMOS Image Sensor SoC Chip Datasheet](https://files.pine64.org/doc/datasheet/pine64/S5K4ECGX_EVT1_DataSheet_R005_20100816.pdf) +* [S5K4EC 5MP CMOS Image Sensor Driver Source Code in C language](https://files.pine64.org/doc/datasheet/pine64/s5k4ec.c) + +Early version Camera module information: + +* [Bonsen Kexin V118-A64-GC2145-HM5065 CMOS Image Sensor Module](https://files.pine64.org/doc/datasheet/pine64/D116-A64_Bonsen_cmos_camera.pdf) +* [HiMax 5MP CMOS Image Sensor SoC](https://files.pine64.org/doc/datasheet/pine64/HM5065-DS-V03.pdf) + +LCD Touch Screen Panel information: + +* [7.0" 1200x600 TFT-LCD Panel Specification](https://files.pine64.org/doc/datasheet/pine64/FY07024DI26A30-D_feiyang_LCD_panel.pdf) +* [Touch Panel Specification](https://files.pine64.org/doc/datasheet/pine64/HK70DR2459-PG-V01.pdf) +* [GOODiX GT911 5-Point Capacitive Touch Controller Datasheet](https://files.pine64.org/doc/datasheet/pine64/GT911%20Capacitive%20Touch%20Controller%20Datasheet.pdf) + +Lithium Battery information: + +* [8000mAH Lithium Battery Specification](https://files.pine64.org/doc/datasheet/pine64/9070120P%203.7V%208000MAH.pdf) + +Ethernet PHY information: + +* [Realtek RTL8211 10/100/1000M Ethernet Transceiver for PINE A64+ Board](https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf) +* [Realtek RTL8201 10/100M Ethernet Transceiver for PINE A64 Board](https://files.pine64.org/doc/datasheet/pine64/rtl8201cp.pdf) + +Wifi/BT module information: + +* [PINE A64 Wifi/BT Module Schematic](https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf) +* [Realtek RTL8723BS WiFi with BT SDIO](https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf) + +Enclosure information: + +* [Playbox Enclosure 3D file](https://files.pine64.org/doc/datasheet/case/playbox_enclosure_20160426.stp) +* [ABS Enclosure 3D file](https://files.pine64.org/doc/datasheet/case/ABS_enclosure_20160426.stp) +* [Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing](https://files.pine64.org/doc/datasheet/case/pine64%20Die%20Cast%20casing-final.jpg) + +Connector information: + +* [2.0mm PH Type connector specification use in Lithium Battery (VBAT) port and RTC Battery port](https://files.pine64.org/doc/datasheet/pine64/ePH.pdf) +* [0.5mm Pitch cover type FPC connector specification use in DSI port, TP port and CSI port](https://files.pine64.org/doc/datasheet/pine64/0.5FPC%20Front%20Open%20Connector%20H=1.5.pdf) + +Remote control button mapping: + +* [Official Remote Control for the PINE A64 Button Mapping](https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg) diff --git a/content/documentation/Pine_A64/Further_information/Other_resources.adoc b/content/documentation/Pine_A64/Further_information/Other_resources.adoc deleted file mode 100644 index 33b1378c..00000000 --- a/content/documentation/Pine_A64/Further_information/Other_resources.adoc +++ /dev/null @@ -1,29 +0,0 @@ ---- -title: "Other resources" -draft: false -menu: - docs: - title: - parent: "Pine_A64/Further_information" - identifier: "Pine_A64/Further_information/Other_resources" - weight: ---- - -* http://web.archive.org/web/20230501084346/https://synfare.com/599N105E/hwdocs/pine64/index.html[Good documentation about PINE A64, A64+, and A64-LTS GPIO pins article] -* https://linux-sunxi.org/Pine64#Manufacturer_images[Linux Sunxi Wiki page on PINE A64] -* https://github.com/longsleep/build-pine64-image[PINE A64 Linux build scripts, tools and instructions by Longsleep] -* https://www.stdin.xyz/downloads/people/longsleep/pine64-images/[PINE A64 Linux image by Longsleep] -* https://github.com/ayufan-pine64/linux-build/releases[PINE A64 Linux Github by ayufan] -* https://github.com/ayufan-pine64/android-7.1/releases[PINE A64 Android Github by ayufan] -* https://www.armbian.com/pine64[Armbian's PINE A64 Page] -* https://github.com/umiddelb/z2d/tree/master/pine64[Collection of scripts to set up a minimal Xenial 14.04.3 / Debian 8 Jessie root filesystem Contributed By Uli Middelberg] -* https://github.com/apritzel/pine64[Linux Image created by Andre Przywara] -* https://blog.hypriot.com/post/the-pine-a64-is-about-to-become=the-cheapest-ARM-64-bit-platform-to-run-Docker/[PINE A64 with HypriotOS by Dieter and Govinda] -* https://sosfakeflash.wordpress.com/2008/09/02/h2testw-14-gold-standard-in-detecting-usb-counterfeit-drives/comment-page-3/#comment-9861[H2testw 1.4 – Gold Standard In Detecting USB Counterfeit Drives] -* https://oss.digirati.com.br/f3/[F3 - an alternative to h2testw] -* https://www.phoronix.com/scan.php?page=article&item=pine-64-benchmark&num=1[Benchmarking The Low-Cost PINE 64+ ARM Single Board Computer by Michael Larabel] -* https://www.youtube.com/playlist?list=PLgj96wTPcMKffRm_Sk6673Nfy_I6b5UJW[A series of Youtube video on PINE A64 Developers Board by Michael Larson] -* https://rayhightower.com/blog/2016/04/04/pine64-quick-start-guide-using-mac-os-x/[PINE64 Quick Start Guide (with Gotchas)] -* https://softwarebakery.com/shrinking-images-on-linux[Shrinking images on Linux by FrozenCow] -* https://github.com/avafinger/ffmpeg-3.3.4_cedrus264[FFmpeg Hardware encoder Cedrus264 on Linux by avafinger ] - diff --git a/content/documentation/Pine_A64/Further_information/Other_resources.md b/content/documentation/Pine_A64/Further_information/Other_resources.md new file mode 100644 index 00000000..8ea4bf72 --- /dev/null +++ b/content/documentation/Pine_A64/Further_information/Other_resources.md @@ -0,0 +1,28 @@ +--- +title: "Other resources" +draft: false +menu: + docs: + title: + parent: "Pine_A64/Further_information" + identifier: "Pine_A64/Further_information/Other_resources" + weight: +--- + +* [Good documentation about PINE A64, A64+, and A64-LTS GPIO pins article](http://web.archive.org/web/20230501084346/https://synfare.com/599N105E/hwdocs/pine64/index.html) +* [Linux Sunxi Wiki page on PINE A64](https://linux-sunxi.org/Pine64#Manufacturer_images) +* [PINE A64 Linux build scripts, tools and instructions by Longsleep](https://github.com/longsleep/build-pine64-image) +* [PINE A64 Linux image by Longsleep](https://www.stdin.xyz/downloads/people/longsleep/pine64-images/) +* [PINE A64 Linux Github by ayufan](https://github.com/ayufan-pine64/linux-build/releases) +* [PINE A64 Android Github by ayufan](https://github.com/ayufan-pine64/android-7.1/releases) +* [Armbian’s PINE A64 Page](https://www.armbian.com/pine64) +* [Collection of scripts to set up a minimal Xenial 14.04.3 / Debian 8 Jessie root filesystem Contributed By Uli Middelberg](https://github.com/umiddelb/z2d/tree/master/pine64) +* [Linux Image created by Andre Przywara](https://github.com/apritzel/pine64) +* [PINE A64 with HypriotOS by Dieter and Govinda](https://blog.hypriot.com/post/the-pine-a64-is-about-to-become=the-cheapest-ARM-64-bit-platform-to-run-Docker/) +* [H2testw 1.4 – Gold Standard In Detecting USB Counterfeit Drives](https://sosfakeflash.wordpress.com/2008/09/02/h2testw-14-gold-standard-in-detecting-usb-counterfeit-drives/comment-page-3/#comment-9861) +* [F3 - an alternative to h2testw](https://oss.digirati.com.br/f3/) +* [Benchmarking The Low-Cost PINE 64+ ARM Single Board Computer by Michael Larabel](https://www.phoronix.com/scan.php?page=article&item=pine-64-benchmark&num=1) +* [A series of Youtube video on PINE A64 Developers Board by Michael Larson](https://www.youtube.com/playlist?list=PLgj96wTPcMKffRm_Sk6673Nfy_I6b5UJW) +* [PINE64 Quick Start Guide (with Gotchas)](https://rayhightower.com/blog/2016/04/04/pine64-quick-start-guide-using-mac-os-x/) +* [Shrinking images on Linux by FrozenCow](https://softwarebakery.com/shrinking-images-on-linux) +* [FFmpeg Hardware encoder Cedrus264 on Linux by avafinger ](https://github.com/avafinger/ffmpeg-3.3.4_cedrus264) diff --git a/content/documentation/Pine_A64/Further_information/Schematics_and_certifications.adoc b/content/documentation/Pine_A64/Further_information/Schematics_and_certifications.adoc deleted file mode 100644 index 6e6951ac..00000000 --- a/content/documentation/Pine_A64/Further_information/Schematics_and_certifications.adoc +++ /dev/null @@ -1,35 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "Pine_A64/Further_information" - identifier: "Pine_A64/Further_information/Schematics_and_certifications" - weight: ---- - -Schematics and general files: - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/Pine%20A64%20Pin%20Assignment%20160215.pdf[PINE A64 Pi-2/Eular/Ext Bus/Wifi Bus Connector Pin Assignment (Updated 15/Feb/2016)] - -Board schematics: - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/Pine%20A64%20512MB%20rev%20B-2015121601_Release.pdf[PINE A64 512MB Rev B Board Schematic] -* https://files.pine64.org/doc/Pine%20A64%20Schematic/a64-db-rev%20b-20151217-Plus-Release.pdf[PINE A64+ 1GB Rev B Board Schematic] -* https://files.pine64.org/doc/Pine%20A64%20Schematic/Pine%20A64plus%202GB%20Rev%20C-20160113_Release.pdf[PINE A64+ 2GB Rev C Board Schematic] -* https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf[PINE A64 Wifi/BT Module Schematic] - - -Stereo audio DAC schematics: - -* https://forum.pine64.org/attachment.php?aid=697[PINE A64 Stereo audio DAC schematics] - - -Certifications: - -* Disclaimer: Please note that PINE64 SBC is not a "final" product and in general certification is not necessary. However, PINE64 still submit the SBC for FCC, CE, and ROHS certifications and obtain the certificates to prove that the SBC board can pass the testing. Please note, a final commercial product needs to perform its own testing and obtain its own certificate. -* https://files.pine64.org/doc/cert/Pine%20A64%20Board%20FCC%20certification%20CCF20160624.jpg[PINE A64 FCC Certificate] -* https://files.pine64.org/doc/cert/Pine%20A64%20Board%20CE%20Certification%20CCF20160624.jpg[PINE A64 CE Certificate] -* https://files.pine64.org/doc/cert/CCF20160627_00000.jpg[PINE A64 RoHS Certificate] - diff --git a/content/documentation/Pine_A64/Further_information/Schematics_and_certifications.md b/content/documentation/Pine_A64/Further_information/Schematics_and_certifications.md new file mode 100644 index 00000000..1ae4ae04 --- /dev/null +++ b/content/documentation/Pine_A64/Further_information/Schematics_and_certifications.md @@ -0,0 +1,32 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "Pine_A64/Further_information" + identifier: "Pine_A64/Further_information/Schematics_and_certifications" + weight: +--- + +Schematics and general files: + +* [PINE A64 Pi-2/Eular/Ext Bus/Wifi Bus Connector Pin Assignment (Updated 15/Feb/2016)](https://files.pine64.org/doc/Pine%20A64%20Schematic/Pine%20A64%20Pin%20Assignment%20160215.pdf) + +Board schematics: + +* [PINE A64 512MB Rev B Board Schematic](https://files.pine64.org/doc/Pine%20A64%20Schematic/Pine%20A64%20512MB%20rev%20B-2015121601_Release.pdf) +* [PINE A64+ 1GB Rev B Board Schematic](https://files.pine64.org/doc/Pine%20A64%20Schematic/a64-db-rev%20b-20151217-Plus-Release.pdf) +* [PINE A64+ 2GB Rev C Board Schematic](https://files.pine64.org/doc/Pine%20A64%20Schematic/Pine%20A64plus%202GB%20Rev%20C-20160113_Release.pdf) +* [PINE A64 Wifi/BT Module Schematic](https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf) + +Stereo audio DAC schematics: + +* [PINE A64 Stereo audio DAC schematics](https://forum.pine64.org/attachment.php?aid=697) + +Certifications: + +* Disclaimer: Please note that PINE64 SBC is not a "final" product and in general certification is not necessary. However, PINE64 still submit the SBC for FCC, CE, and ROHS certifications and obtain the certificates to prove that the SBC board can pass the testing. Please note, a final commercial product needs to perform its own testing and obtain its own certificate. +* [PINE A64 FCC Certificate](https://files.pine64.org/doc/cert/Pine%20A64%20Board%20FCC%20certification%20CCF20160624.jpg) +* [PINE A64 CE Certificate](https://files.pine64.org/doc/cert/Pine%20A64%20Board%20CE%20Certification%20CCF20160624.jpg) +* [PINE A64 RoHS Certificate](https://files.pine64.org/doc/cert/CCF20160627_00000.jpg) diff --git a/content/documentation/Pinebook/Further_information/Datasheets.adoc b/content/documentation/Pinebook/Further_information/Datasheets.adoc deleted file mode 100644 index 6b3f9323..00000000 --- a/content/documentation/Pinebook/Further_information/Datasheets.adoc +++ /dev/null @@ -1,66 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "Pinebook/Further_information" - identifier: "Pinebook/Further_information/Datasheets" - weight: 2 ---- - -Allwinner A64 SoC: - -* https://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf[Allwinner A64 SoC Brief Introduction] -* https://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf[Allwinner A64 SoC Data Sheet V1.1 (Official Released Version)] -* https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf[Allwinner A64 SoC User Manual V1.0 (Official Release Version)] - -X-Powers AXP803 PMU (Power Management Unit): - -* https://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf[AXP803 PMIC Datasheet] - -LPDDR3: - -* https://files.pine64.org/doc/datasheet/pine64/AWL3A1632_mobile_lpddr3_1600Mbps.pdf[Allwinner LPDDR3 Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/FORESEE%20178ball%2012x11.5%20LPDDR3%2016G%20Spec%20V1.0-1228.pdf[Foresee LPDDR3 Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/K4E6E304EE-EGCE.pdf[Samsung LPDDR3 Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/LPDDR3%20178ball%208Gb_H9CCNNN8JTALAR_Rev1.0.pdf[Hynix LPDDR3 Datasheet] - -eMMC: - -* https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf[PINE64 eMMC module schematic] -* https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf[PINE64 USB adapter for eMMC module V2 schematic] -* https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar[PINE64 USB adapter for eMMC module PCB in JPEG] -* https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf[16GB Foresee eMMC Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf[32GB/64GB/128GB SanDisk eMMC Datasheet] - -SPI NOR flash: - -* https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf[WinBond 128Mb SPI Flash Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf[GigaDevice 128Mb SPI Flash Datasheet] - -WiFi/BT module: - -* https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf[Realtek RTL8723BS WiFi with BT SDIO] - -LCD Panel: - -* https://files.pine64.org/doc/datasheet/pinebook/11.6inches-1080P-IPS-LCD-Panel-spec-WJFH116008A.pdf[1920x1080 1080P 11.6″ IPS LCD Panel datasheet] -* https://files.pine64.org/doc/datasheet/pinebook/11.6inches-TFT-LCD%20Approval%20Specification%20N116BGE-E42%20Ver%203.0.pdf[1366x768 11.6″ TFT LCD Panel datasheet] -* https://files.pine64.org/doc/datasheet/pinebook/14inches-HB140WX1-501(%20EDP1.2)%20Preliminary%20Product%20specification.pdf[1366x768 14″ TFT LCD Panel datasheet] - -Touchpad: - -* https://files.pine64.org/doc/datasheet/pinebook/11-Toucpad-HK-9058%20specification.pdf[Touchpad Specification for 11.6″ model] -* https://files.pine64.org/doc/datasheet/pinebook/14-Touchpad-HK-9562%20specification.pdf[Touchpad Specification for 14″ model] - -Camera sensor: - -* https://files.pine64.org/doc/datasheet/pinebook/ZC-RZ3762-3703%C2%A0S1.0-Camera-Module%20spec.pdf[VGA Camera module specification] -* https://files.pine64.org/doc/datasheet/pinebook/VGA-CMOS-Sensor--BF3703%20Datasheet.pdf[VGA Camera Sensor Data Sheet] - -Lithium battery: - -* https://files.pine64.org/doc/datasheet/pinebook/PL5267103P-3.7V-10000mAh-1S2P58-9-W101-7P正向-11.6.pdf[10000 mAH Lithium Battery Specification for 11.6″ model] -* https://files.pine64.org/doc/datasheet/pinebook/40110175P%203.8V%2010000mAh规格书-14.pdf[10000 mAH Lithium Battery Specification for 14″ model] - diff --git a/content/documentation/Pinebook/Further_information/Datasheets.md b/content/documentation/Pinebook/Further_information/Datasheets.md new file mode 100644 index 00000000..b8b36f0b --- /dev/null +++ b/content/documentation/Pinebook/Further_information/Datasheets.md @@ -0,0 +1,65 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "Pinebook/Further_information" + identifier: "Pinebook/Further_information/Datasheets" + weight: 2 +--- + +Allwinner A64 SoC: + +* [Allwinner A64 SoC Brief Introduction](https://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf) +* [Allwinner A64 SoC Data Sheet V1.1 (Official Released Version)](https://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf) +* [Allwinner A64 SoC User Manual V1.0 (Official Release Version)](https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf) + +X-Powers AXP803 PMU (Power Management Unit): + +* [AXP803 PMIC Datasheet](https://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf) + +LPDDR3: + +* [Allwinner LPDDR3 Datasheet](https://files.pine64.org/doc/datasheet/pine64/AWL3A1632_mobile_lpddr3_1600Mbps.pdf) +* [Foresee LPDDR3 Datasheet](https://files.pine64.org/doc/datasheet/pine64/FORESEE%20178ball%2012x11.5%20LPDDR3%2016G%20Spec%20V1.0-1228.pdf) +* [Samsung LPDDR3 Datasheet](https://files.pine64.org/doc/datasheet/pine64/K4E6E304EE-EGCE.pdf) +* [Hynix LPDDR3 Datasheet](https://files.pine64.org/doc/datasheet/pine64/LPDDR3%20178ball%208Gb_H9CCNNN8JTALAR_Rev1.0.pdf) + +eMMC: + +* [PINE64 eMMC module schematic](https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf) +* [PINE64 USB adapter for eMMC module V2 schematic](https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf) +* [PINE64 USB adapter for eMMC module PCB in JPEG](https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar) +* [16GB Foresee eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf) +* [32GB/64GB/128GB SanDisk eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf) + +SPI NOR flash: + +* [WinBond 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf) +* [GigaDevice 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf) + +WiFi/BT module: + +* [Realtek RTL8723BS WiFi with BT SDIO](https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf) + +LCD Panel: + +* [1920x1080 1080P 11.6″ IPS LCD Panel datasheet](https://files.pine64.org/doc/datasheet/pinebook/11.6inches-1080P-IPS-LCD-Panel-spec-WJFH116008A.pdf) +* [1366x768 11.6″ TFT LCD Panel datasheet](https://files.pine64.org/doc/datasheet/pinebook/11.6inches-TFT-LCD%20Approval%20Specification%20N116BGE-E42%20Ver%203.0.pdf) +* [1366x768 14″ TFT LCD Panel datasheet](https://files.pine64.org/doc/datasheet/pinebook/14inches-HB140WX1-501(%20EDP1.2)%20Preliminary%20Product%20specification.pdf) + +Touchpad: + +* [Touchpad Specification for 11.6″ model](https://files.pine64.org/doc/datasheet/pinebook/11-Toucpad-HK-9058%20specification.pdf) +* [Touchpad Specification for 14″ model](https://files.pine64.org/doc/datasheet/pinebook/14-Touchpad-HK-9562%20specification.pdf) + +Camera sensor: + +* [VGA Camera module specification](https://files.pine64.org/doc/datasheet/pinebook/ZC-RZ3762-3703%C2%A0S1.0-Camera-Module%20spec.pdf) +* [VGA Camera Sensor Data Sheet](https://files.pine64.org/doc/datasheet/pinebook/VGA-CMOS-Sensor--BF3703%20Datasheet.pdf) + +Lithium battery: + +* [10000 mAH Lithium Battery Specification for 11.6″ model](https://files.pine64.org/doc/datasheet/pinebook/PL5267103P-3.7V-10000mAh-1S2P58-9-W101-7P正向-11.6.pdf) +* [10000 mAH Lithium Battery Specification for 14″ model](https://files.pine64.org/doc/datasheet/pinebook/40110175P%203.8V%2010000mAh规格书-14.pdf) diff --git a/content/documentation/Pinebook/Further_information/Other_resources.adoc b/content/documentation/Pinebook/Further_information/Other_resources.adoc deleted file mode 100644 index ceceb797..00000000 --- a/content/documentation/Pinebook/Further_information/Other_resources.adoc +++ /dev/null @@ -1,16 +0,0 @@ ---- -title: "Other resources" -draft: false -menu: - docs: - title: - parent: "Pinebook/Further_information" - identifier: "Pinebook/Further_information/Other_resources" - weight: 4 ---- - -* https://linux-sunxi.org/Pine_Pinebook[Linux Sunxi Wiki page on Pinebook] -* https://github.com/ayufan-pine64/linux-build/releases[Pinebook Linux Github by ayufan] -* https://github.com/ayufan-pine64/android-7.1/releases[Pinebook Android Github by ayufan] -* https://www.armbian.com/pinebook-a64[Armbian's Pinebook Page] - diff --git a/content/documentation/Pinebook/Further_information/Other_resources.md b/content/documentation/Pinebook/Further_information/Other_resources.md new file mode 100644 index 00000000..0ed0898c --- /dev/null +++ b/content/documentation/Pinebook/Further_information/Other_resources.md @@ -0,0 +1,15 @@ +--- +title: "Other resources" +draft: false +menu: + docs: + title: + parent: "Pinebook/Further_information" + identifier: "Pinebook/Further_information/Other_resources" + weight: 4 +--- + +* [Linux Sunxi Wiki page on Pinebook](https://linux-sunxi.org/Pine_Pinebook) +* [Pinebook Linux Github by ayufan](https://github.com/ayufan-pine64/linux-build/releases) +* [Pinebook Android Github by ayufan](https://github.com/ayufan-pine64/android-7.1/releases) +* [Armbian’s Pinebook Page](https://www.armbian.com/pinebook-a64) diff --git a/content/documentation/Pinebook/Further_information/Schematics_and_certifications.adoc b/content/documentation/Pinebook/Further_information/Schematics_and_certifications.adoc deleted file mode 100644 index 9b0a1909..00000000 --- a/content/documentation/Pinebook/Further_information/Schematics_and_certifications.adoc +++ /dev/null @@ -1,31 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "Pinebook/Further_information" - identifier: "Pinebook/Further_information/Schematics_and_certifications" - weight: 3 ---- - -Mainboard schematics: - -* https://files.pine64.org/doc/pinebook/pinebook_mainboard_schematic_3.0.pdf[Pinebook Mainboard schematics] - -Daughter Board schematics: - -* https://files.pine64.org/doc/pinebook/pinebook_smallboard_schematic_1.0.pdf[Pinebook Daughter board schematics] - -Serial Console Earphone Jack pinout: - -* https://files.pine64.org/doc/pinebook/guide/Pinebook_Earphone_Serial_Console_Developer_Guide.pdf[Pinebook Serial Console Earphone Jack pinout] - -Certifications: - -* https://files.pine64.org/doc/cert/Pinebook%20FCC%20certification%20VOC20170928.pdf[Pinebook FCC Certificate] -* https://files.pine64.org/doc/cert/Pinebook%20FCC%20ID-Spread%20Spectrum%20Transmitter.pdf[Pinebook FCC ID-Spread Spectrum Transmitter Certificate] -* https://files.pine64.org/doc/cert/Pinebook%20FCC%20ID-Digital%20Transmission%20System.pdf[Pinebook FCC ID-Digital Transmission System Certificate] -* https://files.pine64.org/doc/cert/Pinebook%20CE%20certification%20Micom20171207.pdf[Pinebook CE Certificate] -* https://files.pine64.org/doc/cert/Pinebook%20ROHS%20certification%20VOC20170918.pdf[Pinebook RoHS Certificate] - diff --git a/content/documentation/Pinebook/Further_information/Schematics_and_certifications.md b/content/documentation/Pinebook/Further_information/Schematics_and_certifications.md new file mode 100644 index 00000000..4f622f02 --- /dev/null +++ b/content/documentation/Pinebook/Further_information/Schematics_and_certifications.md @@ -0,0 +1,30 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "Pinebook/Further_information" + identifier: "Pinebook/Further_information/Schematics_and_certifications" + weight: 3 +--- + +Mainboard schematics: + +* [Pinebook Mainboard schematics](https://files.pine64.org/doc/pinebook/pinebook_mainboard_schematic_3.0.pdf) + +Daughter Board schematics: + +* [Pinebook Daughter board schematics](https://files.pine64.org/doc/pinebook/pinebook_smallboard_schematic_1.0.pdf) + +Serial Console Earphone Jack pinout: + +* [Pinebook Serial Console Earphone Jack pinout](https://files.pine64.org/doc/pinebook/guide/Pinebook_Earphone_Serial_Console_Developer_Guide.pdf) + +Certifications: + +* [Pinebook FCC Certificate](https://files.pine64.org/doc/cert/Pinebook%20FCC%20certification%20VOC20170928.pdf) +* [Pinebook FCC ID-Spread Spectrum Transmitter Certificate](https://files.pine64.org/doc/cert/Pinebook%20FCC%20ID-Spread%20Spectrum%20Transmitter.pdf) +* [Pinebook FCC ID-Digital Transmission System Certificate](https://files.pine64.org/doc/cert/Pinebook%20FCC%20ID-Digital%20Transmission%20System.pdf) +* [Pinebook CE Certificate](https://files.pine64.org/doc/cert/Pinebook%20CE%20certification%20Micom20171207.pdf) +* [Pinebook RoHS Certificate](https://files.pine64.org/doc/cert/Pinebook%20ROHS%20certification%20VOC20170918.pdf) diff --git a/content/documentation/Pinebook/Further_information/Specifications.adoc b/content/documentation/Pinebook/Further_information/Specifications.md similarity index 83% rename from content/documentation/Pinebook/Further_information/Specifications.adoc rename to content/documentation/Pinebook/Further_information/Specifications.md index 2868679d..c4639144 100644 --- a/content/documentation/Pinebook/Further_information/Specifications.adoc +++ b/content/documentation/Pinebook/Further_information/Specifications.md @@ -25,7 +25,7 @@ Input Power: CPU Architecture: -* https://www.arm.com/products/processors/cortex-a/cortex-a53-processor.php[Quad-core ARM Cortex-A53 Processor@1152Mhz] +* [Quad-core ARM Cortex-A53 Processor@1152Mhz](https://www.arm.com/products/processors/cortex-a/cortex-a53-processor.php) * A power-efficient ARM v8 architecture * 64 and 32bit execution states for scalable high performance * Support NEON Advanced SIMD (Single Instruction Multiple Data) instruction for acceleration of media and signal processing function @@ -36,9 +36,9 @@ CPU Architecture: GPU Architecture: -* https://www.arm.com/products/multimedia/mali-gpu/ultra-low-power/mali-400.php[ARM Mali400MP2 Dual-core GPU] +* [ARM Mali400MP2 Dual-core GPU](https://www.arm.com/products/multimedia/mali-gpu/ultra-low-power/mali-400.php) * Support OpenGL ES 2.0 and OpenVG 1.1 standard -* https://gitlab.freedesktop.org/lima/web/wikis/home[Open source driver] +* [Open source driver](https://gitlab.freedesktop.org/lima/web/wikis/home) System Memory: @@ -73,4 +73,3 @@ Expansion Ports: * microSD card port - support SD, SDHC, SDXC uo to 256GB * 2x USB 2.0 port * earphone plug with UART console mux circuit - diff --git a/content/documentation/Pinebook_Pro/Further_information/Datasheets.adoc b/content/documentation/Pinebook_Pro/Further_information/Datasheets.adoc deleted file mode 100644 index 3bdb7a15..00000000 --- a/content/documentation/Pinebook_Pro/Further_information/Datasheets.adoc +++ /dev/null @@ -1,82 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "Pinebook_Pro/Further_information" - identifier: "Pinebook_Pro/Further_information/Datasheets" - weight: ---- - -Rockchip RK3399 SoC information: - -* https://www.rock-chips.com/a/en/products/RK33_Series/2016/0419/758.html[Rockchip RK3399 SoC Brief] -* https://opensource.rock-chips.com/images/d/d7/Rockchip_RK3399_Datasheet_V2.1-20200323.pdf[Rockchip RK3399 Datasheet v2.1] -* https://www.rockchip.fr/Rockchip%20RK3399%20TRM%20V1.4%20Part1.pdf[Rockchip RK3399 Technical Reference Manual v1.4, part 1] -* https://www.rockchip.fr/Rockchip%20RK3399%20TRM%20V1.3%20Part1.pdf[Rockchip RK3399 Technical Reference Manual v1.3, part 1] and https://www.rockchip.fr/Rockchip%20RK3399%20TRM%20V1.3%20Part2.pdf[part 2] -* https://files.pine64.org/doc/datasheet/rockpro64/RK808%20datasheet%20V0.8.pdf[Rockchip RK808 Datasheet v0.8] - -LPDDR4 SDRAM (366-pin BGA): - -* https://files.pine64.org/doc/datasheet/PinebookPro/micron%20SM512M64Z01MD4BNK-053FT%20LPDDR4%20(366Ball).pdf[Micron 366 balls Mobile LPDDR4 Datasheet] - -eMMC information: - -* https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf[PINE64 eMMC module schematic] -* https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf[PINE64 USB adapter for eMMC module V2 schematic] -* https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar[PINE64 USB adapter for eMMC module PCB in JPEG] -* https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf[64GB/128GB SanDisk eMMC Datasheet] - -SPI NOR Flash information: - -* https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf[WinBond 128Mb SPI Flash Datasheet] -* https://wiki.pine64.org/wiki/File:Ds-00220-gd25q127c-rev1-df2f4.pdf[GigaDevice 128Mb SPI Flash Datasheet (updated)] - -Wireless and Bluetooth information: - -* https://files.pine64.org/doc/datasheet/PinebookPro/AP6256%20datasheet_V1.7_12282018.pdf[AMPAK AP6256 11AC Wi-Fi + Bluetooth5 Datasheet] - -Audio codec: - -* http://www.everest-semi.com/pdf/ES8316%20PB.pdf[Everest ES8316 Audio Codec Datasheet] -* https://forum.pine64.org/attachment.php?aid=1935[Everest ES8316 User Guide with register-level description] - -LCD panel: - -* https://files.pine64.org/doc/datasheet/PinebookPro/NV140FHM-N49_Rev.P0_20160804_201710235838.pdf[14" 1920x1080 IPS LCD Panel datasheet] - -USB-related information: - -* Internal USB 2.0 hub: https://wiki.pine64.org/wiki/File:GL850G_USB_Hub_1.07.pdf[GL850G USB Hub Datasheet] -* USB Type-C Controller: https://www.onsemi.com/pub/Collateral/FUSB302-D.PDF[ON Semiconductor FUSB302 Datasheet] - -Touchpad information: - -* https://files.pine64.org/doc/datasheet/PinebookPro/YX%20HK-9562%20HID%20I2C%20Specification.pdf[PineBook Pro Touchpad Specification] - -Keyboard information: - -* https://wiki.pine64.org/wiki/File:SH68F83V2.0.pdf[Sinowealth SH68F83 Datasheet] -* US ANSI: XK-HS002 MB27716023 - -Full HD camera sensor: - -* https://files.pine64.org/doc/datasheet/PinebookPro/HK-2145-263.pdf[Full HD Camera module specification (in Chinese)] -* https://files.pine64.org/doc/datasheet/PinebookPro/GC2145%20CSP%20DataSheet%20release%20V1.0_20131201.pdf[GalaxyCore GC2145 Full HD Camera Sensor Datasheet] - -Battery-related information: - -* Battery charging IC: https://www.ti.com/lit/ds/symlink/bq24171.pdf?ts=1607068456825&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FBQ24171[Texas Instruments BQ24171 Datasheet] -* Battery monitoring IC: https://cdn.datasheetspdf.com/pdf-down/C/W/2/CW2015-Cellwise.pdf[Cellwise CW2015 Datasheet] -* https://files.pine64.org/doc/datasheet/pinebook/40110175P%203.8V%2010000mAh规格书-14.pdf[10000 mAH Lithium Battery Specification] -* https://files.pine64.org/doc/datasheet/pinebook/40110175P%203.8V%209600mAh%20Lithium%20Battery%20Specification.pdf[Later batches 9600 mAh / 36.48 Wh model WYC40110175P Lithium Battery Specification] - -Power path device: - -* https://wiki.pine64.org/wiki/File:Sis412dn.pdf[N-MOS / MOSFET] - -NVMe adapter: - -* https://wiki.pine64.org/wiki/File:Hirose-FH26W-35S-0.3SHW%2860%29-datasheet.pdf[FH26-35S-0.3SHW flat flex connector (compatible, not OEM)] - diff --git a/content/documentation/Pinebook_Pro/Further_information/Datasheets.md b/content/documentation/Pinebook_Pro/Further_information/Datasheets.md new file mode 100644 index 00000000..ce3d06a4 --- /dev/null +++ b/content/documentation/Pinebook_Pro/Further_information/Datasheets.md @@ -0,0 +1,81 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "Pinebook_Pro/Further_information" + identifier: "Pinebook_Pro/Further_information/Datasheets" + weight: +--- + +Rockchip RK3399 SoC information: + +* [Rockchip RK3399 SoC Brief](https://www.rock-chips.com/a/en/products/RK33_Series/2016/0419/758.html) +* [Rockchip RK3399 Datasheet v2.1](https://opensource.rock-chips.com/images/d/d7/Rockchip_RK3399_Datasheet_V2.1-20200323.pdf) +* [Rockchip RK3399 Technical Reference Manual v1.4, part 1](https://www.rockchip.fr/Rockchip%20RK3399%20TRM%20V1.4%20Part1.pdf) +* [Rockchip RK3399 Technical Reference Manual v1.3, part 1](https://www.rockchip.fr/Rockchip%20RK3399%20TRM%20V1.3%20Part1.pdf) and [part 2](https://www.rockchip.fr/Rockchip%20RK3399%20TRM%20V1.3%20Part2.pdf) +* [Rockchip RK808 Datasheet v0.8](https://files.pine64.org/doc/datasheet/rockpro64/RK808%20datasheet%20V0.8.pdf) + +LPDDR4 SDRAM (366-pin BGA): + +* [Micron 366 balls Mobile LPDDR4 Datasheet](https://files.pine64.org/doc/datasheet/PinebookPro/micron%20SM512M64Z01MD4BNK-053FT%20LPDDR4%20(366Ball).pdf) + +eMMC information: + +* [PINE64 eMMC module schematic](https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf) +* [PINE64 USB adapter for eMMC module V2 schematic](https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf) +* [PINE64 USB adapter for eMMC module PCB in JPEG](https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar) +* [64GB/128GB SanDisk eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf) + +SPI NOR Flash information: + +* [WinBond 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf) +* [GigaDevice 128Mb SPI Flash Datasheet (updated)](https://wiki.pine64.org/wiki/File:Ds-00220-gd25q127c-rev1-df2f4.pdf) + +Wireless and Bluetooth information: + +* [AMPAK AP6256 11AC Wi-Fi + Bluetooth5 Datasheet](https://files.pine64.org/doc/datasheet/PinebookPro/AP6256%20datasheet_V1.7_12282018.pdf) + +Audio codec: + +* [Everest ES8316 Audio Codec Datasheet](http://www.everest-semi.com/pdf/ES8316%20PB.pdf) +* [Everest ES8316 User Guide with register-level description](https://forum.pine64.org/attachment.php?aid=1935) + +LCD panel: + +* [14" 1920x1080 IPS LCD Panel datasheet](https://files.pine64.org/doc/datasheet/PinebookPro/NV140FHM-N49_Rev.P0_20160804_201710235838.pdf) + +USB-related information: + +* Internal USB 2.0 hub: [GL850G USB Hub Datasheet](https://wiki.pine64.org/wiki/File:GL850G_USB_Hub_1.07.pdf) +* USB Type-C Controller: [ON Semiconductor FUSB302 Datasheet](https://www.onsemi.com/pub/Collateral/FUSB302-D.PDF) + +Touchpad information: + +* [PineBook Pro Touchpad Specification](https://files.pine64.org/doc/datasheet/PinebookPro/YX%20HK-9562%20HID%20I2C%20Specification.pdf) + +Keyboard information: + +* [Sinowealth SH68F83 Datasheet](https://wiki.pine64.org/wiki/File:SH68F83V2.0.pdf) +* US ANSI: XK-HS002 MB27716023 + +Full HD camera sensor: + +* [Full HD Camera module specification (in Chinese)](https://files.pine64.org/doc/datasheet/PinebookPro/HK-2145-263.pdf) +* [GalaxyCore GC2145 Full HD Camera Sensor Datasheet](https://files.pine64.org/doc/datasheet/PinebookPro/GC2145%20CSP%20DataSheet%20release%20V1.0_20131201.pdf) + +Battery-related information: + +* Battery charging IC: [Texas Instruments BQ24171 Datasheet](https://www.ti.com/lit/ds/symlink/bq24171.pdf?ts=1607068456825&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FBQ24171) +* Battery monitoring IC: [Cellwise CW2015 Datasheet](https://cdn.datasheetspdf.com/pdf-down/C/W/2/CW2015-Cellwise.pdf) +* [10000 mAH Lithium Battery Specification](https://files.pine64.org/doc/datasheet/pinebook/40110175P%203.8V%2010000mAh规格书-14.pdf) +* [Later batches 9600 mAh / 36.48 Wh model WYC40110175P Lithium Battery Specification](https://files.pine64.org/doc/datasheet/pinebook/40110175P%203.8V%209600mAh%20Lithium%20Battery%20Specification.pdf) + +Power path device: + +* [N-MOS / MOSFET](https://wiki.pine64.org/wiki/File:Sis412dn.pdf) + +NVMe adapter: + +* [FH26-35S-0.3SHW flat flex connector (compatible, not OEM)](https://wiki.pine64.org/wiki/File:Hirose-FH26W-35S-0.3SHW%2860%29-datasheet.pdf) diff --git a/content/documentation/Pinebook_Pro/Further_information/Schematics_and_certifications.adoc b/content/documentation/Pinebook_Pro/Further_information/Schematics_and_certifications.adoc deleted file mode 100644 index f2897cb9..00000000 --- a/content/documentation/Pinebook_Pro/Further_information/Schematics_and_certifications.adoc +++ /dev/null @@ -1,42 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "Pinebook_Pro/Further_information" - identifier: "Pinebook_Pro/Further_information/Schematics_and_certifications" - weight: ---- - -Pinebook Pro Main Board Schematic And Silkscreen: - -* https://files.pine64.org/doc/PinebookPro/pinebookpro_schematic_v21a_20220419.pdf[Pinebook Pro Main Board ver 2.1a Schematic 20220419] -* https://files.pine64.org/doc/PinebookPro/pinebookpro_v2.1_mainboard_schematic.pdf[Pinebook Pro Main Board ver 2.1 Schematic 20190905] -* https://wiki.pine64.org/wiki/File:Pinebookpro-v2.1-top-ref.pdf[Pinebook Pro ver 2.1 Top Layer Silkscreen] -* https://wiki.pine64.org/wiki/File:Pinebookpro-v2.1-bottom-ref.pdf[Pinebook Pro ver 2.1 Bottom Layer Silkscreen] - -Pinebook Pro Daughter Board Schematic: - -* https://files.pine64.org/doc/PinebookPro/pinebookpro_v2.1_daughterboard_schematic.pdf[Pinebook Pro Daughter Board ver 2.1 Schematic] - -Optional Pinebook Pro NVMe Adapter Schematic: - -* https://files.pine64.org/doc/PinebookPro/pinebookpro_v2.1_NVMe-adapter_schematic.pdf[Pinebook Pro NVMe Adapter Board ver 2.1 Schematic] - -Serial Console Earphone Jack Pinout: - -* https://files.pine64.org/doc/pinebook/guide/Pinebook_Earphone_Serial_Console_Developer_Guide.pdf[Pinebook Serial Console Earphone Jack Pinout] - -Pinebook Pro Case: - -* https://files.pine64.org/doc/PinebookPro/drawings/Pinebook%20Pro%20Principle%20Views.pdf[AutoCAD PDF File ] -* https://files.pine64.org/doc/PinebookPro/drawings/Pinebook%20Pro%20Principle%20Views.ai[AutoCAD AI File ] -* https://files.pine64.org/doc/PinebookPro/drawings/Pinebook%20Pro%20Principle%20Views.dwg[AutoCAD DWG File ] - -Pinebook Pro Certifications: - -* https://files.pine64.org/doc/cert/Pinebook%20Pro%20FCC%20Certificate-S19071103501001.pdf[Pinebook Pro FCC Certificate] -* https://files.pine64.org/doc/cert/Pinebook%20Pro%20CE%20RED%20Certificate-S19051404304.pdf[Pinebook Pro CE Certificate] -* https://files.pine64.org/doc/cert/Pinebook%20Pro%20ROHS%20Compliance%20Certificate.pdf[Pinebook Pro RoHS Certificate] - diff --git a/content/documentation/Pinebook_Pro/Further_information/Schematics_and_certifications.md b/content/documentation/Pinebook_Pro/Further_information/Schematics_and_certifications.md new file mode 100644 index 00000000..a026d7ff --- /dev/null +++ b/content/documentation/Pinebook_Pro/Further_information/Schematics_and_certifications.md @@ -0,0 +1,41 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "Pinebook_Pro/Further_information" + identifier: "Pinebook_Pro/Further_information/Schematics_and_certifications" + weight: +--- + +Pinebook Pro Main Board Schematic And Silkscreen: + +* [Pinebook Pro Main Board ver 2.1a Schematic 20220419](https://files.pine64.org/doc/PinebookPro/pinebookpro_schematic_v21a_20220419.pdf) +* [Pinebook Pro Main Board ver 2.1 Schematic 20190905](https://files.pine64.org/doc/PinebookPro/pinebookpro_v2.1_mainboard_schematic.pdf) +* [Pinebook Pro ver 2.1 Top Layer Silkscreen](https://wiki.pine64.org/wiki/File:Pinebookpro-v2.1-top-ref.pdf) +* [Pinebook Pro ver 2.1 Bottom Layer Silkscreen](https://wiki.pine64.org/wiki/File:Pinebookpro-v2.1-bottom-ref.pdf) + +Pinebook Pro Daughter Board Schematic: + +* [Pinebook Pro Daughter Board ver 2.1 Schematic](https://files.pine64.org/doc/PinebookPro/pinebookpro_v2.1_daughterboard_schematic.pdf) + +Optional Pinebook Pro NVMe Adapter Schematic: + +* [Pinebook Pro NVMe Adapter Board ver 2.1 Schematic](https://files.pine64.org/doc/PinebookPro/pinebookpro_v2.1_NVMe-adapter_schematic.pdf) + +Serial Console Earphone Jack Pinout: + +* [Pinebook Serial Console Earphone Jack Pinout](https://files.pine64.org/doc/pinebook/guide/Pinebook_Earphone_Serial_Console_Developer_Guide.pdf) + +Pinebook Pro Case: + +* [AutoCAD PDF File ](https://files.pine64.org/doc/PinebookPro/drawings/Pinebook%20Pro%20Principle%20Views.pdf) +* [AutoCAD AI File ](https://files.pine64.org/doc/PinebookPro/drawings/Pinebook%20Pro%20Principle%20Views.ai) +* [AutoCAD DWG File ](https://files.pine64.org/doc/PinebookPro/drawings/Pinebook%20Pro%20Principle%20Views.dwg) + +Pinebook Pro Certifications: + +* [Pinebook Pro FCC Certificate](https://files.pine64.org/doc/cert/Pinebook%20Pro%20FCC%20Certificate-S19071103501001.pdf) +* [Pinebook Pro CE Certificate](https://files.pine64.org/doc/cert/Pinebook%20Pro%20CE%20RED%20Certificate-S19051404304.pdf) +* [Pinebook Pro RoHS Certificate](https://files.pine64.org/doc/cert/Pinebook%20Pro%20ROHS%20Compliance%20Certificate.pdf) diff --git a/content/documentation/Pinebook_Pro/Further_information/Specifications.adoc b/content/documentation/Pinebook_Pro/Further_information/Specifications.md similarity index 85% rename from content/documentation/Pinebook_Pro/Further_information/Specifications.adoc rename to content/documentation/Pinebook_Pro/Further_information/Specifications.md index 13f32528..c01a4c09 100644 --- a/content/documentation/Pinebook_Pro/Further_information/Specifications.adoc +++ b/content/documentation/Pinebook_Pro/Further_information/Specifications.md @@ -11,7 +11,7 @@ menu: Based on Rockchip RK3399 -== CPU Architecture +## CPU Architecture big.LITTLE architecture: Dual Cortex-A72 + Quad Cortex-A53, 64-bit CPU @@ -26,29 +26,29 @@ big.LITTLE architecture: Dual Cortex-A72 + Quad Cortex-A53, 64-bit CPU Cortex-A72 (big cluster): -* https://developer.arm.com/products/processors/cortex-a/cortex-a72[Dual-core Cortex-A72 up to 2.0GHz CPU] +* [Dual-core Cortex-A72 up to 2.0GHz CPU](https://developer.arm.com/products/processors/cortex-a/cortex-a72) * Superscalar, variable-length, out-of-order pipeline * L1 cache 48KB Icache and 32KB Dcache for each A72 * L2 cache 1024KB for big cluster Cortex-A53 (little cluster): -* https://developer.arm.com/products/processors/cortex-a/cortex-a53[Quad-core Cortex-A53 up to 1.5GHz CPU] +* [Quad-core Cortex-A53 up to 1.5GHz CPU](https://developer.arm.com/products/processors/cortex-a/cortex-a53) * In-order pipeline with symmetric dual-issue of most instructions * L1 cache 32KB Icache and 32KB Dcache for each A53 * L2 cache 512KB for little cluster Cortex-M0 (control processors): -* https://developer.arm.com/ip-products/processors/cortex-m/cortex-m0[Cortex-M0 CPU] +* [Cortex-M0 CPU](https://developer.arm.com/ip-products/processors/cortex-m/cortex-m0) * Two Cortex-M0 cooperate with the central processors * Architecture: Armv6-M * Thumb/Thumb2 instruction set * 32 bit only -== GPU Architecture +## GPU Architecture -* https://developer.arm.com/products/graphics-and-multimedia/mali-gpus/mali-t860-and-mali-t880-gpus[ARM Mali-T860MP4 Quad-core GPU] +* [ARM Mali-T860MP4 Quad-core GPU](https://developer.arm.com/products/graphics-and-multimedia/mali-gpus/mali-t860-and-mali-t880-gpus) * The highest performance GPUs built on Arm Mali’s famous Midgard architecture, the Mali-T860 GPU is designed for complex graphics use cases and provide stunning visuals for UHD content. * Frequency 650MHz * Throughput 1300Mtri/s, 10.4Gpix/s @@ -61,7 +61,7 @@ Graphic interface standards: * DirectX® 11 FL11_1 * RenderScript™ -== System Memory +## System Memory RAM Memory: @@ -79,18 +79,18 @@ Storage Memory: SPI flash: -* link:/documentation/Pinebook_Pro/Features/SPI[SPI] +* [SPI](/documentation/Pinebook_Pro/Features/SPI) * 128Mbit / 16MByte * 1 bit interface * Bootable, (first boot device, ahead of eMMC & SD card) * U-Boot images can be made to work, but as of 2020/06/24 there is no standardized image available. -== Video out +## Video out * USB-C Alt mode DP * Up to 3840x2160 p60, dependant on adapter, (2 lanes verses 4 lanes) -== Expansion Ports +## Expansion Ports MicroSD card: @@ -107,4 +107,3 @@ USB ports: * Note that high power USB devices may not work reliably on a PBP. Or they may draw enough power to drain the battery even when the PBP is plugged into A.C. One alternative is externally powered USB devices. Headphone jack switchable to UART serial console mux circuit - diff --git a/content/documentation/Pinecil/Further_information/Certifications.adoc b/content/documentation/Pinecil/Further_information/Certifications.adoc deleted file mode 100644 index 4bd2e0d8..00000000 --- a/content/documentation/Pinecil/Further_information/Certifications.adoc +++ /dev/null @@ -1,23 +0,0 @@ ---- -title: "Certifications" -draft: false -menu: - docs: - title: - parent: "Pinecil/Further_information" - identifier: "Pinecil/Further_information/Certifications" - weight: ---- - -Pinecil V2 Certifications: - -* https://files.pine64.org/doc/cert/Pinecilv2%20CE%20Certificate%20LCSA070722058E.pdf[Pinecil V2 CE Certificate] -* https://files.pine64.org/doc/cert/Pinecilv2%20FCC%20Certificate%20LCSA070722057E.pdf[Pinecil V2 FCC Certificate] -* https://files.pine64.org/doc/cert/Pinecilv2%20ROHS%20Report%20LCSA070722059R.pdf[Pinecil V2 ROHS Report] - -Pinecil V1 Certifications: - -* https://files.pine64.org/doc/cert/Pinecil%20CE%20RED%20Certificate-S20102803801001.pdf[Pinecil CE RED Certificate] -* https://files.pine64.org/doc/cert/Pinecil%20FCC%20Certificate-S20102803802001.pdf[Pinecil FCC Certificate] -* https://files.pine64.org/doc/cert/Pinecil%20RoHS10%20Certificate-S20102803803001.pdf[Pinecil ROHS Certificate] - diff --git a/content/documentation/Pinecil/Further_information/Certifications.md b/content/documentation/Pinecil/Further_information/Certifications.md new file mode 100644 index 00000000..42cae4c8 --- /dev/null +++ b/content/documentation/Pinecil/Further_information/Certifications.md @@ -0,0 +1,22 @@ +--- +title: "Certifications" +draft: false +menu: + docs: + title: + parent: "Pinecil/Further_information" + identifier: "Pinecil/Further_information/Certifications" + weight: +--- + +Pinecil V2 Certifications: + +* [Pinecil V2 CE Certificate](https://files.pine64.org/doc/cert/Pinecilv2%20CE%20Certificate%20LCSA070722058E.pdf) +* [Pinecil V2 FCC Certificate](https://files.pine64.org/doc/cert/Pinecilv2%20FCC%20Certificate%20LCSA070722057E.pdf) +* [Pinecil V2 ROHS Report](https://files.pine64.org/doc/cert/Pinecilv2%20ROHS%20Report%20LCSA070722059R.pdf) + +Pinecil V1 Certifications: + +* [Pinecil CE RED Certificate](https://files.pine64.org/doc/cert/Pinecil%20CE%20RED%20Certificate-S20102803801001.pdf) +* [Pinecil FCC Certificate](https://files.pine64.org/doc/cert/Pinecil%20FCC%20Certificate-S20102803802001.pdf) +* [Pinecil ROHS Certificate](https://files.pine64.org/doc/cert/Pinecil%20RoHS10%20Certificate-S20102803803001.pdf) diff --git a/content/documentation/Pinecil/Further_information/Schematics_and_datasheets.adoc b/content/documentation/Pinecil/Further_information/Schematics_and_datasheets.adoc deleted file mode 100644 index b5a2d8a3..00000000 --- a/content/documentation/Pinecil/Further_information/Schematics_and_datasheets.adoc +++ /dev/null @@ -1,89 +0,0 @@ ---- -title: "Schematics and datasheets" -draft: false -menu: - docs: - title: - parent: "Pinecil/Further_information" - identifier: "Pinecil/Further_information/Schematics_and_datasheets" - weight: ---- - - - -== Schematics and Board Data - -=== Pinecil V2 mainboard schematic - -* https://files.pine64.org/doc/Pinecil/Pinecil_schematic_v2.0_20220608.pdf[Pinecil mainboard schematic ver 2.0 20220608, this is production version schematic] -* https://files.pine64.org/doc/Pinecil/Pinecil_PCB_placement_v2.0_20220608.pdf[Pinecil mainboard ver 2.0 PCB Component Placement PDF file] - -=== Pinecil V1 mainboard schematic - -V1 was only sold until July 2022, and then discontinued for newer V2 model - -* https://files.pine64.org/doc/Pinecil/Pinecil_schematic_v1.0a_20201120.pdf[Pinecil mainboard schematic ver 1.0 20201120, this is production version schematic] -* https://files.pine64.org/doc/Pinecil/Pinecil-PCB-placement-v1.0-topplace.pdf[Pinecil mainboard ver 1.0 PCB Component Placement Top PDF file] -* https://files.pine64.org/doc/Pinecil/Pinecil-PCB-placement-v1.0-bottomplace.pdf[Pinecil mainboard ver 1.0 PCB Component Placement Bottom PDF file] -* https://files.pine64.org/doc/Pinecil/Pinecil-PCB-placement-v1.0-topplace.dxf[Pinecil mainboard ver 1.0 PCB Component Placement Top Drawing file] -* https://files.pine64.org/doc/Pinecil/Pinecil-PCB-placement-v1.0-bottomplace.dxf[Pinecil mainboard ver 1.0 PCB Component Placement Bottom Drawing file] - -== Datasheets for Components - -=== Pinecil V2 datasheets - -* Power MOSFET Switch: https://datasheet.lcsc.com/lcsc/2105241831_HUASHUO-HSM4313_C2828487.pdf[HSM4313], location U13 (https://lcsc.com/product-detail/MOSFETs_HUASHUO-HSM4313_C2828487.html[Replacement HSM4313]). - -* LDO Regulator: https://datasheet.lcsc.com/lcsc/1912111437_LOWPOWER-LP3986-33B3F_C387689.pdf[LP 3986-33], Ultra-low noise, location U5 (Replacement https://www.lcsc.com/product-detail/Linear-Voltage-Regulators-LDO_LOWPOWER-LP3986-33B3F_C387689.html[LP 3986-33]). - -* Buck Converter: https://datasheet.lcsc.com/lcsc/2108072230_TECH-PUBLIC-TP6841S6_C2844736.pdf[TP6841S6 40V], Step-Down, location U8, (Replacement https://www.lcsc.com/product-detail/DC-DC-Converters_TECH-PUBLIC-TP6841S6-A_C2844924.html[TP6841S6-A]). - -* USB-C PD Controller: https://rocelec.widen.net/view/pdf/0av2cqef3a/FAIR-S-A0001311862-1.pdf?t.download=true&u=5oefqw[FUSB302MPX], location U1, (Replacement https://www.lcsc.com/product-detail/span-style-background-color-ff0-USB-span-ICs_onsemi-Fusb302mpx_C442699.html[FUSB302MPX]) - -* Acceleration/Gyroscope: https://lcsc.com/product-detail/Attitude-Sensor-Gyroscope_Hangzhou-Silan-Microelectronics-SC7A20TR_C5126709.html[SC7A20 sensor], Silan, location U9 (replacement unknown). - -* NTC Temperature Sensor: https://media.digikey.com/pdf/Data%20Sheets/TDK%20PDFs/NTCG163JF103FTDS_Spec.pdf[NTCG163JF103FTDS], location NTC1 (Replacement https://lcsc.com/product-detail/span-style-background-color-ff0-NTC-span-Thermistors_TDK-NTCG163JF103FTDS_C435270.html[NTC here]). Note that U10 is empty if NTC type thermistor is used. - -* Optional Hall Effect Sensor: https://files.pine64.org/doc/datasheet/pinecil/si7210-datasheet.pdf[ Si7210-B-00-IV(R) ]by Silicon Labs, location U14. This is a user add-on and does not come installed on the pcb. -** (https://www.silabs.com/documents/public/application-notes/an1018-si72xx-sensors.pdf[How magnets work near Hall Sensor Si7210]) -** (https://lcsc.com/product-detail/Position-Sensor_SILICON-LABS-SI7210-B-00-IVR_C2654956.html[Replacement Si7210-B-00-IV], also at Digikey and Mouser) - -* Operational Amplifier https://files.pine64.org/doc/datasheet/pinecil/SGM8557.pdf[SGM8557-1AXN5G], SGMicro, Low Noise OP Amp Datasheet, location U11 (replacement unknown). - -* Display Screen OLED https://files.pine64.org/doc/datasheet/pinecil/1810010328_UG-Univision-Semicon-UG-9616TSWCG02_C88335.pdf[QUG-9616TSWCG02] datasheet (Replacement https://www.lcsc.com/product-detail/OLED-Displays-Modules_UG-Univision-Semicon-UG-9616TSWCG02_C88335.html[QUG-9616TSWCG02] OLED Display). - -MCU: Bouffalo Labs, BL-706_QFN48, RISC-V + 2.4 GHz RF SoC - -* https://lupyuen.github.io/articles/bl706[BL706 Analysis], by Lupyuen, includes datasheet, location U15. -* https://dev.bouffalolab.com/media/doc/702/open/datasheet/en/html/index.html[BL706 datasheet] -* https://dev.bouffalolab.com/media/doc/702/open/reference_manual/en/html/index.html[BL706 Reference Manual] -* https://github.com/bouffalolab/bl_mcu_sdk[SDK and Bouffalo documents] -* https://datasheet.lcsc.com/lcsc/1912111437_TAE-Zhejiang-Abel-Elec-TAXM32M4ZFBCCT2T_C388797.pdf[SMD Resonator] for Bluetooth BLE, 32MHZ/12PF-10PPM, SMD2016-4P, location UX1 (Replacement https://lcsc.com/product-detail/Crystals_TAE-Zhejiang-Abel-Elec-TAXM32M4ZFBCCT2T_C388797.html[SMD Resonator]). - -USB-C port: - -* possible part, has not been verified: https://www.lcsc.com/product-detail/span-style-background-color-ff0-USB-span-Connectors_SHOU-HAN-TYPE-C-24P-QT_C2681555.html[Replacement USB-C port] - -=== Pinecil V1 datasheets - -* Buck converter: https://files.pine64.org/doc/datasheet/pinecil/RT7272B-05.pdf[RT7272B 3A Datasheet], Ricktek, Step-Down converter, location U8 -* LDO Regulator: https://datasheet.lcsc.com/lcsc/1912111437_LOWPOWER-LP3986-33B3F_C387689.pdf[LP 3986-33], location U5, (https://www.lcsc.com/product-detail/Linear-Voltage-Regulators-LDO_LOWPOWER-LP3986-33B3F_C387689.html[Replacement here]). -* MOSFET Switch: https://files.pine64.org/doc/datasheet/pinecil/Changjiang-Electronics-Tech-CJ-CJQ7328.pdf[CJQ7328 8A datasheet], Chang Jiang. -** Hint: people have replaced V1 mosfet using the better rated one from the newer V2 datasheets (HSM4313 has same footprint and higher rating), see V2 section for MOSFET. -* Acceleration https://files.pine64.org/doc/datasheet/pinecil/BMA223-Bosch.pdf[Bosch BMA223 Sensor Datasheet] -* Temperature Sensor: https://files.pine64.org/doc/datasheet/pinecil/TMP35_36_37.pdf[Analog Device TMP36 Datasheet], location U10, (possible https://www.lcsc.com/product-detail/Temperature-Sensors_Analog-Devices-TMP36GRTZ-REEL7_C129489.html[replacement here]). -* Optional Hall Effect Sensor: https://files.pine64.org/doc/datasheet/pinecil/si7210-datasheet.pdf[ Si7210-B-00-IV(R) by Silicon Labs, location U14]. This is a user add-on and does not come installed on the pcb. -** (https://www.silabs.com/documents/public/application-notes/an1018-si72xx-sensors.pdf[How magnets work near Hall Sensor Si7210]) -** (https://lcsc.com/product-detail/Position-Sensor_SILICON-LABS-SI7210-B-00-IVR_C2654956.html[One place to buy it], also at Digikey and Mouser) -* OLED Display screen: https://files.pine64.org/doc/datasheet/pinecil/1810010328_UG-Univision-Semicon-UG-9616TSWCG02_C88335.pdf[QUG 9616TSWCG02 Display Module Datasheet] -* USB Type-C PD Controller: https://files.pine64.org/doc/datasheet/pinecil/FUSB302-D.PDF[FUSB302 USB PD Datasheet] -* OP Amp information: https://files.pine64.org/doc/datasheet/pinecil/SGM8557.pdf[SGMicro SGM8557-1 Low Noise OP Amp Datasheet (U11)] -* Capacitors: https://lcsc.com/product-detail/Multilayer-Ceramic-Capacitors-MLCC-SMD-SMT_YAGEO-CC0603KRX7R9BB105_C559769.html[possible replacement part for C5, 1uF/50V] -* USB-C port: possible part, has not been verified: https://www.lcsc.com/product-detail/span-style-background-color-ff0-USB-span-Connectors_SHOU-HAN-TYPE-C-24P-QT_C2681555.html[Replacement] - -GigaDevice RISC-V SoC data: - -* https://files.pine64.org/doc/datasheet/pinecil/GD32VF103_Datasheet_Rev%201.1.pdf[GigaDevice RISC-V GD32VF103TB SoC Datasheet V1.1] -* https://files.pine64.org/doc/datasheet/pinecil/GD32VF103_User_Manual_EN_V1.2.pdf[GigaDevice RISC-V GD32VF103TB SoC Usermanual V1.2] - -Breakout Board Datasheet: https://files.pine64.org/doc/datasheet/pinecil/LP6498B6F.pdf[LP6498B6F 1.2A Switching Power Regulator] \ No newline at end of file diff --git a/content/documentation/Pinecil/Further_information/Schematics_and_datasheets.md b/content/documentation/Pinecil/Further_information/Schematics_and_datasheets.md new file mode 100644 index 00000000..f8141d8b --- /dev/null +++ b/content/documentation/Pinecil/Further_information/Schematics_and_datasheets.md @@ -0,0 +1,79 @@ +--- +title: "Schematics and datasheets" +draft: false +menu: + docs: + title: + parent: "Pinecil/Further_information" + identifier: "Pinecil/Further_information/Schematics_and_datasheets" + weight: +--- + +## Schematics and Board Data + +### Pinecil V2 mainboard schematic + +* [Pinecil mainboard schematic ver 2.0 20220608, this is production version schematic](https://files.pine64.org/doc/Pinecil/Pinecil_schematic_v2.0_20220608.pdf) +* [Pinecil mainboard ver 2.0 PCB Component Placement PDF file](https://files.pine64.org/doc/Pinecil/Pinecil_PCB_placement_v2.0_20220608.pdf) + +### Pinecil V1 mainboard schematic + +V1 was only sold until July 2022, and then discontinued for newer V2 model + +* [Pinecil mainboard schematic ver 1.0 20201120, this is production version schematic](https://files.pine64.org/doc/Pinecil/Pinecil_schematic_v1.0a_20201120.pdf) +* [Pinecil mainboard ver 1.0 PCB Component Placement Top PDF file](https://files.pine64.org/doc/Pinecil/Pinecil-PCB-placement-v1.0-topplace.pdf) +* [Pinecil mainboard ver 1.0 PCB Component Placement Bottom PDF file](https://files.pine64.org/doc/Pinecil/Pinecil-PCB-placement-v1.0-bottomplace.pdf) +* [Pinecil mainboard ver 1.0 PCB Component Placement Top Drawing file](https://files.pine64.org/doc/Pinecil/Pinecil-PCB-placement-v1.0-topplace.dxf) +* [Pinecil mainboard ver 1.0 PCB Component Placement Bottom Drawing file](https://files.pine64.org/doc/Pinecil/Pinecil-PCB-placement-v1.0-bottomplace.dxf) + +## Datasheets for Components + +### Pinecil V2 datasheets + +* Power MOSFET Switch: [HSM4313](https://datasheet.lcsc.com/lcsc/2105241831_HUASHUO-HSM4313_C2828487.pdf), location U13 ([Replacement HSM4313](https://lcsc.com/product-detail/MOSFETs_HUASHUO-HSM4313_C2828487.html)). +* LDO Regulator: [LP 3986-33](https://datasheet.lcsc.com/lcsc/1912111437_LOWPOWER-LP3986-33B3F_C387689.pdf), Ultra-low noise, location U5 (Replacement [LP 3986-33](https://www.lcsc.com/product-detail/Linear-Voltage-Regulators-LDO_LOWPOWER-LP3986-33B3F_C387689.html)). +* Buck Converter: [TP6841S6 40V](https://datasheet.lcsc.com/lcsc/2108072230_TECH-PUBLIC-TP6841S6_C2844736.pdf), Step-Down, location U8, (Replacement [TP6841S6-A](https://www.lcsc.com/product-detail/DC-DC-Converters_TECH-PUBLIC-TP6841S6-A_C2844924.html)). +* USB-C PD Controller: [FUSB302MPX](https://rocelec.widen.net/view/pdf/0av2cqef3a/FAIR-S-A0001311862-1.pdf?t.download=true&u=5oefqw), location U1, (Replacement [FUSB302MPX](https://www.lcsc.com/product-detail/span-style-background-color-ff0-USB-span-ICs_onsemi-Fusb302mpx_C442699.html)) +* Acceleration/Gyroscope: [SC7A20 sensor](https://lcsc.com/product-detail/Attitude-Sensor-Gyroscope_Hangzhou-Silan-Microelectronics-SC7A20TR_C5126709.html), Silan, location U9 (replacement unknown). +* NTC Temperature Sensor: [NTCG163JF103FTDS](https://media.digikey.com/pdf/Data%20Sheets/TDK%20PDFs/NTCG163JF103FTDS_Spec.pdf), location NTC1 (Replacement [NTC here](https://lcsc.com/product-detail/span-style-background-color-ff0-NTC-span-Thermistors_TDK-NTCG163JF103FTDS_C435270.html)). Note that U10 is empty if NTC type thermistor is used. +* Optional Hall Effect Sensor: [ Si7210-B-00-IV(R) ](https://files.pine64.org/doc/datasheet/pinecil/si7210-datasheet.pdf)by Silicon Labs, location U14. This is a user add-on and does not come installed on the pcb. + * ([How magnets work near Hall Sensor Si7210](https://www.silabs.com/documents/public/application-notes/an1018-si72xx-sensors.pdf)) + * ([Replacement Si7210-B-00-IV](https://lcsc.com/product-detail/Position-Sensor_SILICON-LABS-SI7210-B-00-IVR_C2654956.html), also at Digikey and Mouser) +* Operational Amplifier [SGM8557-1AXN5G](https://files.pine64.org/doc/datasheet/pinecil/SGM8557.pdf), SGMicro, Low Noise OP Amp Datasheet, location U11 (replacement unknown). +* Display Screen OLED [QUG-9616TSWCG02](https://files.pine64.org/doc/datasheet/pinecil/1810010328_UG-Univision-Semicon-UG-9616TSWCG02_C88335.pdf) datasheet (Replacement [QUG-9616TSWCG02](https://www.lcsc.com/product-detail/OLED-Displays-Modules_UG-Univision-Semicon-UG-9616TSWCG02_C88335.html) OLED Display). + +MCU: Bouffalo Labs, BL-706_QFN48, RISC-V + 2.4 GHz RF SoC + +* [BL706 Analysis](https://lupyuen.github.io/articles/bl706), by Lupyuen, includes datasheet, location U15. +* [BL706 datasheet](https://dev.bouffalolab.com/media/doc/702/open/datasheet/en/html/index.html) +* [BL706 Reference Manual](https://dev.bouffalolab.com/media/doc/702/open/reference_manual/en/html/index.html) +* [SDK and Bouffalo documents](https://github.com/bouffalolab/bl_mcu_sdk) +* [SMD Resonator](https://datasheet.lcsc.com/lcsc/1912111437_TAE-Zhejiang-Abel-Elec-TAXM32M4ZFBCCT2T_C388797.pdf) for Bluetooth BLE, 32MHZ/12PF-10PPM, SMD2016-4P, location UX1 (Replacement [SMD Resonator](https://lcsc.com/product-detail/Crystals_TAE-Zhejiang-Abel-Elec-TAXM32M4ZFBCCT2T_C388797.html)). + +USB-C port: + +* possible part, has not been verified: [Replacement USB-C port](https://www.lcsc.com/product-detail/span-style-background-color-ff0-USB-span-Connectors_SHOU-HAN-TYPE-C-24P-QT_C2681555.html) + +### Pinecil V1 datasheets + +* Buck converter: [RT7272B 3A Datasheet](https://files.pine64.org/doc/datasheet/pinecil/RT7272B-05.pdf), Ricktek, Step-Down converter, location U8 +* LDO Regulator: [LP 3986-33](https://datasheet.lcsc.com/lcsc/1912111437_LOWPOWER-LP3986-33B3F_C387689.pdf), location U5, ([Replacement here](https://www.lcsc.com/product-detail/Linear-Voltage-Regulators-LDO_LOWPOWER-LP3986-33B3F_C387689.html)). +* MOSFET Switch: [CJQ7328 8A datasheet](https://files.pine64.org/doc/datasheet/pinecil/Changjiang-Electronics-Tech-CJ-CJQ7328.pdf), Chang Jiang. + * Hint: people have replaced V1 mosfet using the better rated one from the newer V2 datasheets (HSM4313 has same footprint and higher rating), see V2 section for MOSFET. +* Acceleration [Bosch BMA223 Sensor Datasheet](https://files.pine64.org/doc/datasheet/pinecil/BMA223-Bosch.pdf) +* Temperature Sensor: [Analog Device TMP36 Datasheet](https://files.pine64.org/doc/datasheet/pinecil/TMP35_36_37.pdf), location U10, (possible [replacement here](https://www.lcsc.com/product-detail/Temperature-Sensors_Analog-Devices-TMP36GRTZ-REEL7_C129489.html)). +* Optional Hall Effect Sensor: [ Si7210-B-00-IV(R) by Silicon Labs, location U14](https://files.pine64.org/doc/datasheet/pinecil/si7210-datasheet.pdf). This is a user add-on and does not come installed on the pcb. + * ([How magnets work near Hall Sensor Si7210](https://www.silabs.com/documents/public/application-notes/an1018-si72xx-sensors.pdf)) + * ([One place to buy it](https://lcsc.com/product-detail/Position-Sensor_SILICON-LABS-SI7210-B-00-IVR_C2654956.html), also at Digikey and Mouser) +* OLED Display screen: [QUG 9616TSWCG02 Display Module Datasheet](https://files.pine64.org/doc/datasheet/pinecil/1810010328_UG-Univision-Semicon-UG-9616TSWCG02_C88335.pdf) +* USB Type-C PD Controller: [FUSB302 USB PD Datasheet](https://files.pine64.org/doc/datasheet/pinecil/FUSB302-D.PDF) +* OP Amp information: [SGMicro SGM8557-1 Low Noise OP Amp Datasheet (U11)](https://files.pine64.org/doc/datasheet/pinecil/SGM8557.pdf) +* Capacitors: [possible replacement part for C5, 1uF/50V](https://lcsc.com/product-detail/Multilayer-Ceramic-Capacitors-MLCC-SMD-SMT_YAGEO-CC0603KRX7R9BB105_C559769.html) +* USB-C port: possible part, has not been verified: [Replacement](https://www.lcsc.com/product-detail/span-style-background-color-ff0-USB-span-Connectors_SHOU-HAN-TYPE-C-24P-QT_C2681555.html) + +GigaDevice RISC-V SoC data: + +* [GigaDevice RISC-V GD32VF103TB SoC Datasheet V1.1](https://files.pine64.org/doc/datasheet/pinecil/GD32VF103_Datasheet_Rev%201.1.pdf) +* [GigaDevice RISC-V GD32VF103TB SoC Usermanual V1.2](https://files.pine64.org/doc/datasheet/pinecil/GD32VF103_User_Manual_EN_V1.2.pdf) + +Breakout Board Datasheet: [LP6498B6F 1.2A Switching Power Regulator](https://files.pine64.org/doc/datasheet/pinecil/LP6498B6F.pdf) diff --git a/content/documentation/Pinecil/Further_information/Specifications.adoc b/content/documentation/Pinecil/Further_information/Specifications.adoc deleted file mode 100644 index 993ec6cf..00000000 --- a/content/documentation/Pinecil/Further_information/Specifications.adoc +++ /dev/null @@ -1,65 +0,0 @@ ---- -title: "Specifications" -draft: false -menu: - docs: - title: - parent: "Pinecil/Further_information" - identifier: "Pinecil/Further_information/Specifications" - weight: ---- - -== Pinecil V2 - -* *Package:* 15cm x 9cm x 2.2cm, white box (released Aug 2, 2022) -* *Dimensions:* 155mm with solder tip or 103mm without solder tip x 12.8mm x 16.2mm -* *Weight:* 28g with solder tip, 18g without solder tip -* *Soldering Tip:* includes type ST-B2 (short tip), Length 86mm, weight 8.2g -* *Platform:* Ralim's IronOS build -* *Display:* OLED White Color Monochrome Display 0.69" 96x16 pixels -* *Chipset:* Bouffalo BL-706 -* *CPU:* 32-bit RV32IMAFC RISC-V "SiFive E24 Core" @ 144 MHz -* *Memory:* -** 192KB Internal ROM -** 132KB SRAM System -* *Power Ports (12V-24V, 88 Watts):* -** Only use one power port at a time (USB or DC barrel) -** USB type C: PD 12V-20V 3A and QC 3.0 12V-20V 3A (magnetic tip USB-C cables are not recommended, and not USB compliant) -** Barrel Jack: DC5525, 12V-24V, minimum 3amps. -** Trying to use an incorrect barrel jack, i.e., DC5521 will https://forum.pine64.org/showthread.php?tid=13237[BREAK the connector] (if it doesn't go in easy, it doesn't fit). -** Recommend operating voltage 12-24V, but a 12V USB-C charger will not perform as well or heat as fast as a USB-C PD65W/20V/3amp charger. -** Tentative support: EPR 140W/28V PD3.1 chargers + EPR cables are theoretically supported in hardware and https://ralim.github.io/IronOS/[IronOS firmware]. -*** EPR is new technology in 2022. Theoretically Pinecil could get a max of 28V and 126W using EPR chargers & EPR cables (natural loss of 140W to 126W due to Tip ohms). -*** Bleeding edge users are using/testing this. -*** EPR is potentially the fastest/highest performance possible for V2; officially Pine Store states 12V-24V, 88W. - -== Pinecil V1 - -* *Package:* 16.8cm x 11.8cm x 2.3cm, black box with clear plastic front (sold before Aug 2, 2022) -* *Dimensions:* 170mm with solder tip or 98mm without solder tip x 12.8mm x 16.2mm -* *Weight:* 30g with solder tip, 20g without solder tip -* *Display:* 0.67" QUG 9616TSWCG02 96x16 Monochrome Matrix display -* *CPU:* GD32VF103TB 32-bit RV32IMAC RISC-V "Bumblebee Core" @ 108 MHz -* *Memory:* -** 128KB Flash -** 32KB SRAM -* *Power supply (12V -21V, 65W):* -** Only use one power port at a time (USB or DC barrel) -** DC 12V-21V 5525 Barrel Jack. Do not try to use a larger 5521 (which requires excessive force). It will https://forum.pine64.org/showthread.php?tid=13237[BREAK the connector]. -** USB-C 12-20V PD or QC3.0 (magnetic tip USB-C cables are not recommended, and not USB compliant) -** Recommend operating voltage 12-21V, some components can tolerate higher voltages at "absolute maximum" but it's very ill-advised - -== Fasteners/Screws - -image:/documentation/images/Pinecil-Thumb-Screws-02.png[Thumb Screws,title=" Thumb Screws",width=200] - -* Originals screws are Phillips (https://www.reddit.com/r/PINE64official/comments/tatf5l/comment/ig4r92v/?context=3[source]): two M2x3mm at the front, and one M2x4mm is the ground screw near the `*[-]*` minus button. -* The bottom-front screw only holds the handle together and does not touch the tip, hence is a shorter m2x 3mm. -* _Thumb screws_ are popular upgrades: an _M2 x 4mm_ thumb screw could replace both the front screen-side Tip holder screw and the ground screw in the rear of the handle. -* It was found that an M2x3mm thumb screw for the tip is a hair _too short_, and just grazes the Tip and the longer _m2 x 4mm is better on top_. -// * https://www.aliexpress.com/item/3256803069568247.html[Stainless Steel, smaller thumb screw, get M2x4mm] -// * https://www.aliexpress.us/item/3256804077282767.html[Black, smaller thumb screw get M2x4mm] -// * Wider head https://www.aliexpress.com/item/3256801293488521.html[(1) Thumb screw], https://www.aliexpress.com/item/2255799966445780.html[(2) Thumb screw] -// * Many Assorted https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20220817084841&isPremium=y&SearchText=thumb+screw+m2+stainless+steel+4mm[M2x4mm screw Options] - -NOTE: If the screw is too long (for example with a length of 5mm) a metal file can be used lightly to shorten it a small amount. Stainless steel is recommended as the softer aluminum screws could mushroom as you tighten down the tip screw too much or over time. \ No newline at end of file diff --git a/content/documentation/Pinecil/Further_information/Specifications.md b/content/documentation/Pinecil/Further_information/Specifications.md new file mode 100644 index 00000000..56317970 --- /dev/null +++ b/content/documentation/Pinecil/Further_information/Specifications.md @@ -0,0 +1,62 @@ +--- +title: "Specifications" +draft: false +menu: + docs: + title: + parent: "Pinecil/Further_information" + identifier: "Pinecil/Further_information/Specifications" + weight: +--- + +## Pinecil V2 + +* **Package:** 15cm x 9cm x 2.2cm, white box (released Aug 2, 2022) +* **Dimensions:** 155mm with solder tip or 103mm without solder tip x 12.8mm x 16.2mm +* **Weight:** 28g with solder tip, 18g without solder tip +* **Soldering Tip:** includes type ST-B2 (short tip), Length 86mm, weight 8.2g +* **Platform:** Ralim’s IronOS build +* **Display:** OLED White Color Monochrome Display 0.69" 96x16 pixels +* **Chipset:** Bouffalo BL-706 +* **CPU:** 32-bit RV32IMAFC RISC-V "SiFive E24 Core" @ 144 MHz +* **Memory:** + * 192KB Internal ROM + * 132KB SRAM System +* **Power Ports (12V-24V, 88 Watts):** + * Only use one power port at a time (USB or DC barrel) + * USB type C: PD 12V-20V 3A and QC 3.0 12V-20V 3A (magnetic tip USB-C cables are not recommended, and not USB compliant) + * Barrel Jack: DC5525, 12V-24V, minimum 3amps. + * Trying to use an incorrect barrel jack, i.e., DC5521 will [BREAK the connector](https://forum.pine64.org/showthread.php?tid=13237) (if it doesn’t go in easy, it doesn’t fit). + * Recommend operating voltage 12-24V, but a 12V USB-C charger will not perform as well or heat as fast as a USB-C PD65W/20V/3amp charger. + * Tentative support: EPR 140W/28V PD3.1 chargers + EPR cables are theoretically supported in hardware and [IronOS firmware](https://ralim.github.io/IronOS/). + * EPR is new technology in 2022. Theoretically Pinecil could get a max of 28V and 126W using EPR chargers & EPR cables (natural loss of 140W to 126W due to Tip ohms). + * Bleeding edge users are using/testing this. + * EPR is potentially the fastest/highest performance possible for V2; officially Pine Store states 12V-24V, 88W. + +## Pinecil V1 + +* **Package:** 16.8cm x 11.8cm x 2.3cm, black box with clear plastic front (sold before Aug 2, 2022) +* **Dimensions:** 170mm with solder tip or 98mm without solder tip x 12.8mm x 16.2mm +* **Weight:** 30g with solder tip, 20g without solder tip +* **Display:** 0.67" QUG 9616TSWCG02 96x16 Monochrome Matrix display +* **CPU:** GD32VF103TB 32-bit RV32IMAC RISC-V "Bumblebee Core" @ 108 MHz +* **Memory:** + * 128KB Flash + * 32KB SRAM +* **Power supply (12V -21V, 65W):** + * Only use one power port at a time (USB or DC barrel) + * DC 12V-21V 5525 Barrel Jack. Do not try to use a larger 5521 (which requires excessive force). It will [BREAK the connector](https://forum.pine64.org/showthread.php?tid=13237). + * USB-C 12-20V PD or QC3.0 (magnetic tip USB-C cables are not recommended, and not USB compliant) + * Recommend operating voltage 12-21V, some components can tolerate higher voltages at "absolute maximum" but it’s very ill-advised + +## Fasteners/Screws + +![Thumb Screws](/documentation/images/Pinecil-Thumb-Screws-02.png) + +* Originals screws are Phillips ([source](https://www.reddit.com/r/PINE64official/comments/tatf5l/comment/ig4r92v/?context=3)): two M2x3mm at the front, and one M2x4mm is the ground screw near the `**[-]**` minus button. +* The bottom-front screw only holds the handle together and does not touch the tip, hence is a shorter m2x 3mm. +* _Thumb screws_ are popular upgrades: an _M2 x 4mm_ thumb screw could replace both the front screen-side Tip holder screw and the ground screw in the rear of the handle. +* It was found that an M2x3mm thumb screw for the tip is a hair _too short_, and just grazes the Tip and the longer _m2 x 4mm is better on top_. + +**📌 NOTE**\ +If the screw is too long (for example with a length of 5mm) a metal file can be used lightly to shorten it a small amount. Stainless steel is recommended as the softer aluminum screws could mushroom as you tighten down the tip screw too much or over time. diff --git a/content/documentation/Pinedio/Datasheets_and_schematics.adoc b/content/documentation/Pinedio/Datasheets_and_schematics.adoc deleted file mode 100644 index 4478e2cf..00000000 --- a/content/documentation/Pinedio/Datasheets_and_schematics.adoc +++ /dev/null @@ -1,36 +0,0 @@ ---- -title: "Datasheets and schematics" -draft: false -menu: - docs: - title: - parent: "Pinedio" - identifier: "Pinedio/Datasheets_and_schematics" - weight: 4 ---- - -== Gateway -* https://semtech.my.salesforce.com/sfc/p/#E0000000JelG/a/2R000000Hlli/Te0cB6.fNWAPfxRfoFz38R6LOTf3sLAJhD4CpS2RwFc[SX1303 datasheets and resources] -* https://docs.rakwireless.com/Product-Categories/WisLink/RAK5146/Datasheet/#overview[RAK5146 datasheets and resources] -* https://wiki.pine64.org/wiki/File:PINE64_LoRa_Gateway_Module_Adapter_Schematic-v1.0-20210308.pdf[Pine64 LoRa Gateway module adapter schematic] - -== End nodes - -* https://www.semtech.com/products/wireless-rf/lora-transceivers/sx1262[SX1262 datasheets and resources] - -== Pinephone backplate - -* https://wiki.pine64.org/wiki/File:Pinephone_LoRa_BackPanel_Schematic-v1.0-20210402.pdf -* https://wiki.pine64.org/wiki/File:CA-S01_LoRa_Chip_Antenna_in_Chinese.pdf -* https://github.com/zschroeder6212/tiny-i2c-spi[I2C SPI Bridge code running on ATtiny84] - -== USB LoRa adapter - -* https://wiki.pine64.org/wiki/File:USB_LoRa_adapter-PINE64_RFM90_SCH_2021_04_26.pdf -* CH341 datasheet: https://wiki.pine64.org/wiki/File:CH341DS1.pdf -* Semtech SX1262 datasheet: https://semtech.my.salesforce.com/sfc/p/#E0000000JelG/a/2R000000HT76/7Nka9W5WgugoZe.xwIHJy6ebj1hW8UJ.USO_Pt2CLLo[File on Semtech website (file is too big for the wiki)] - -== PineDio Stack - -* Schematic: https://wiki.pine64.org/wiki/File:PINEDIO_STACK_V1_0-2021_05_24C.pdf - diff --git a/content/documentation/Pinedio/Datasheets_and_schematics.md b/content/documentation/Pinedio/Datasheets_and_schematics.md new file mode 100644 index 00000000..0c35f46e --- /dev/null +++ b/content/documentation/Pinedio/Datasheets_and_schematics.md @@ -0,0 +1,35 @@ +--- +title: "Datasheets and schematics" +draft: false +menu: + docs: + title: + parent: "Pinedio" + identifier: "Pinedio/Datasheets_and_schematics" + weight: 4 +--- + +## Gateway +* [SX1303 datasheets and resources](https://semtech.my.salesforce.com/sfc/p/#E0000000JelG/a/2R000000Hlli/Te0cB6.fNWAPfxRfoFz38R6LOTf3sLAJhD4CpS2RwFc) +* [RAK5146 datasheets and resources](https://docs.rakwireless.com/Product-Categories/WisLink/RAK5146/Datasheet/#overview) +* [Pine64 LoRa Gateway module adapter schematic](https://wiki.pine64.org/wiki/File:PINE64_LoRa_Gateway_Module_Adapter_Schematic-v1.0-20210308.pdf) + +## End nodes + +* [SX1262 datasheets and resources](https://www.semtech.com/products/wireless-rf/lora-transceivers/sx1262) + +## Pinephone backplate + +* https://wiki.pine64.org/wiki/File:Pinephone_LoRa_BackPanel_Schematic-v1.0-20210402.pdf +* https://wiki.pine64.org/wiki/File:CA-S01_LoRa_Chip_Antenna_in_Chinese.pdf +* [I2C SPI Bridge code running on ATtiny84](https://github.com/zschroeder6212/tiny-i2c-spi) + +## USB LoRa adapter + +* https://wiki.pine64.org/wiki/File:USB_LoRa_adapter-PINE64_RFM90_SCH_2021_04_26.pdf +* CH341 datasheet: https://wiki.pine64.org/wiki/File:CH341DS1.pdf +* Semtech SX1262 datasheet: [File on Semtech website (file is too big for the wiki)](https://semtech.my.salesforce.com/sfc/p/#E0000000JelG/a/2R000000HT76/7Nka9W5WgugoZe.xwIHJy6ebj1hW8UJ.USO_Pt2CLLo) + +## PineDio Stack + +* Schematic: https://wiki.pine64.org/wiki/File:PINEDIO_STACK_V1_0-2021_05_24C.pdf diff --git a/content/documentation/Pinedio/Other_resources.adoc b/content/documentation/Pinedio/Other_resources.adoc deleted file mode 100644 index 9f17f09f..00000000 --- a/content/documentation/Pinedio/Other_resources.adoc +++ /dev/null @@ -1,37 +0,0 @@ ---- -title: "Other resources" -draft: false -menu: - docs: - title: - parent: "Pinedio" - identifier: "Pinedio/Other_resources" - weight: 5 ---- - -* https://www.youtube.com/watch?v=cJ0wpANpbyc[Video: A peek at Pine64's LoRa gateway and modules] -* https://iotw.io/[IOTW - Blockchain-Enabled IoT Data Platform] -* https://lupyuen.github.io/articles/pinedio[PineDio Stack BL604 RISC-V Board: Testing The Prototype] -* https://lupyuen.github.io/articles/lorawan2[LoRaWAN on PineDio Stack BL604 RISC-V Board] -* https://lupyuen.github.io/articles/ttn[The Things Network on PineDio Stack BL604 RISC-V Board] -* https://lupyuen.github.io/articles/prometheus[Monitor IoT Devices in The Things Network with Prometheus and Grafana] -* https://lupyuen.github.io/articles/tsen[Internal Temperature Sensor on BL602] -* https://lupyuen.github.io/articles/roblox[IoT Digital Twin with Roblox and The Things Network] -* https://lupyuen.github.io/articles/gateway[PineDio LoRa Gateway: Testing The Prototype] -* https://lupyuen.github.io/articles/nuttx[Apache NuttX OS on RISC-V BL602 and BL604] -* https://lupyuen.github.io/articles/spi2[SPI on Apache NuttX OS] -* https://lupyuen.github.io/articles/sx1262[LoRa SX1262 on Apache NuttX OS] -* https://lupyuen.github.io/articles/lorawan3[LoRaWAN on Apache NuttX OS] -* https://lupyuen.github.io/articles/rust2[Rust on Apache NuttX OS] -* https://lupyuen.github.io/articles/ikea[Connect IKEA Air Quality Sensor to Apache NuttX OS] -* https://lupyuen.github.io/articles/pinedio2[PineDio Stack BL604 runs Apache NuttX RTOS] -* https://lupyuen.github.io/articles/touch[NuttX Touch Panel Driver for PineDio Stack BL604] -* https://www.robertlipe.com/buttons-on-bl602-nuttx/[Buttons on BL602 NuttX] -* https://lupyuen.github.io/articles/expander[NuttX GPIO Expander for PineDio Stack BL604] -* https://lupyuen.github.io/articles/auto2[(Mostly) Automated Testing of Apache NuttX RTOS on PineDio Stack BL604 RISC-V Board] -* https://lupyuen.github.io/articles/zig[Zig on RISC-V BL602: Quick Peek with Apache NuttX RTOS] -* https://lupyuen.github.io/articles/iot[Build an IoT App with Zig and LoRaWAN] -* https://lupyuen.github.io/articles/lvgl[Build an LVGL Touchscreen App with Zig] -* https://youtu.be/_vADRu939sI[Apache NuttX RTOS on a RISC-V IoT Gadget: PineDio Stack BL604 (Video)] -* https://youtu.be/-2OIHur8X1E[Simpler, safer LVGL Touchscreen Apps with Zig and Apache NuttX RTOS (Video)] - diff --git a/content/documentation/Pinedio/Other_resources.md b/content/documentation/Pinedio/Other_resources.md new file mode 100644 index 00000000..53215607 --- /dev/null +++ b/content/documentation/Pinedio/Other_resources.md @@ -0,0 +1,36 @@ +--- +title: "Other resources" +draft: false +menu: + docs: + title: + parent: "Pinedio" + identifier: "Pinedio/Other_resources" + weight: 5 +--- + +* [Video: A peek at Pine64’s LoRa gateway and modules](https://www.youtube.com/watch?v=cJ0wpANpbyc) +* [IOTW - Blockchain-Enabled IoT Data Platform](https://iotw.io/) +* [PineDio Stack BL604 RISC-V Board: Testing The Prototype](https://lupyuen.github.io/articles/pinedio) +* [LoRaWAN on PineDio Stack BL604 RISC-V Board](https://lupyuen.github.io/articles/lorawan2) +* [The Things Network on PineDio Stack BL604 RISC-V Board](https://lupyuen.github.io/articles/ttn) +* [Monitor IoT Devices in The Things Network with Prometheus and Grafana](https://lupyuen.github.io/articles/prometheus) +* [Internal Temperature Sensor on BL602](https://lupyuen.github.io/articles/tsen) +* [IoT Digital Twin with Roblox and The Things Network](https://lupyuen.github.io/articles/roblox) +* [PineDio LoRa Gateway: Testing The Prototype](https://lupyuen.github.io/articles/gateway) +* [Apache NuttX OS on RISC-V BL602 and BL604](https://lupyuen.github.io/articles/nuttx) +* [SPI on Apache NuttX OS](https://lupyuen.github.io/articles/spi2) +* [LoRa SX1262 on Apache NuttX OS](https://lupyuen.github.io/articles/sx1262) +* [LoRaWAN on Apache NuttX OS](https://lupyuen.github.io/articles/lorawan3) +* [Rust on Apache NuttX OS](https://lupyuen.github.io/articles/rust2) +* [Connect IKEA Air Quality Sensor to Apache NuttX OS](https://lupyuen.github.io/articles/ikea) +* [PineDio Stack BL604 runs Apache NuttX RTOS](https://lupyuen.github.io/articles/pinedio2) +* [NuttX Touch Panel Driver for PineDio Stack BL604](https://lupyuen.github.io/articles/touch) +* [Buttons on BL602 NuttX](https://www.robertlipe.com/buttons-on-bl602-nuttx/) +* [NuttX GPIO Expander for PineDio Stack BL604](https://lupyuen.github.io/articles/expander) +* [(Mostly) Automated Testing of Apache NuttX RTOS on PineDio Stack BL604 RISC-V Board](https://lupyuen.github.io/articles/auto2) +* [Zig on RISC-V BL602: Quick Peek with Apache NuttX RTOS](https://lupyuen.github.io/articles/zig) +* [Build an IoT App with Zig and LoRaWAN](https://lupyuen.github.io/articles/iot) +* [Build an LVGL Touchscreen App with Zig](https://lupyuen.github.io/articles/lvgl) +* [Apache NuttX RTOS on a RISC-V IoT Gadget: PineDio Stack BL604 (Video)](https://youtu.be/_vADRu939sI) +* [Simpler, safer LVGL Touchscreen Apps with Zig and Apache NuttX RTOS (Video)](https://youtu.be/-2OIHur8X1E) diff --git a/content/documentation/Quartz64/Development/Efforts.adoc b/content/documentation/Quartz64/Development/Efforts.adoc deleted file mode 100644 index 74d61b37..00000000 --- a/content/documentation/Quartz64/Development/Efforts.adoc +++ /dev/null @@ -1,17 +0,0 @@ ---- -title: "Efforts" -draft: false -menu: - docs: - title: - parent: "Quartz64/Development" - identifier: "Quartz64/Development/Efforts" - weight: ---- - -See link:/documentation/Quartz64/Development/[Quartz64 Development] - -Information and resources of the ongoing development effort for the Quartz64 can be found on the link:/documentation/Quartz64/Development[Development] page, where the current status of various board functions can be found, and whether they have landed in upstream. - -* https://gitlab.com/pine64-org/quartz-bsp[Quartz64 BSP Gitlab Page] - diff --git a/content/documentation/Quartz64/Development/Efforts.md b/content/documentation/Quartz64/Development/Efforts.md new file mode 100644 index 00000000..79c1fc90 --- /dev/null +++ b/content/documentation/Quartz64/Development/Efforts.md @@ -0,0 +1,16 @@ +--- +title: "Efforts" +draft: false +menu: + docs: + title: + parent: "Quartz64/Development" + identifier: "Quartz64/Development/Efforts" + weight: +--- + +See [Quartz64 Development](/documentation/Quartz64/Development/) + +Information and resources of the ongoing development effort for the Quartz64 can be found on the [Development](/documentation/Quartz64/Development) page, where the current status of various board functions can be found, and whether they have landed in upstream. + +* [Quartz64 BSP Gitlab Page](https://gitlab.com/pine64-org/quartz-bsp) diff --git a/content/documentation/Quartz64/Enclosures.adoc b/content/documentation/Quartz64/Enclosures.adoc deleted file mode 100644 index 997e9dc8..00000000 --- a/content/documentation/Quartz64/Enclosures.adoc +++ /dev/null @@ -1,26 +0,0 @@ ---- -title: "Enclosures" -draft: false -menu: - docs: - title: - parent: "Quartz64" - identifier: "Quartz64/Enclosures" - weight: ---- - -Note: Please expand this section with more cases known to work. - -== Model "A" - -All enclosures that fit the ROCKPro64 should fit the Quartz64 Model "A", as the I/O has been laid out the same on purpose. - -* link:/documentation/Accessories/Cases/Model_A_Acrylic_Open_Enclosure[Model A Acrylic Open Enclosure] - but see the troubleshooting section below. -* link:/documentation/Quartz64/Accessories/Premium_aluminium_case[RockPro64 Premium Aluminium Case] -* link:/documentation/ROCKPro64/Hardware/3D_printable_ITX_mounting_brackets/[ROCKPro64] (Not an enclosure but allows to mount the board in an ATX/ITX case) - -== Model "B" - -* link:/documentation/Accessories/Cases/Model_B_Acrylic_Open_Enclosure[Model B Acrylic Open Enclosure] -* the ROCK64 aluminium enclosure *does not* work, as the DC input jack is placed differently - diff --git a/content/documentation/Quartz64/Enclosures.md b/content/documentation/Quartz64/Enclosures.md new file mode 100644 index 00000000..0199cc6e --- /dev/null +++ b/content/documentation/Quartz64/Enclosures.md @@ -0,0 +1,25 @@ +--- +title: "Enclosures" +draft: false +menu: + docs: + title: + parent: "Quartz64" + identifier: "Quartz64/Enclosures" + weight: +--- + +Note: Please expand this section with more cases known to work. + +## Model "A" + +All enclosures that fit the ROCKPro64 should fit the Quartz64 Model "A", as the I/O has been laid out the same on purpose. + +* [Model A Acrylic Open Enclosure](/documentation/Accessories/Cases/Model_A_Acrylic_Open_Enclosure) - but see the troubleshooting section below. +* [RockPro64 Premium Aluminium Case](/documentation/Quartz64/Accessories/Premium_aluminium_case) +* [ROCKPro64](/documentation/ROCKPro64/Hardware/3D_printable_ITX_mounting_brackets/) (Not an enclosure but allows to mount the board in an ATX/ITX case) + +## Model "B" + +* [Model B Acrylic Open Enclosure](/documentation/Accessories/Cases/Model_B_Acrylic_Open_Enclosure) +* the ROCK64 aluminium enclosure **does not** work, as the DC input jack is placed differently diff --git a/content/documentation/Quartz64/Frequently_Asked_Questions.adoc b/content/documentation/Quartz64/Frequently_Asked_Questions.adoc deleted file mode 100644 index 1834e16e..00000000 --- a/content/documentation/Quartz64/Frequently_Asked_Questions.adoc +++ /dev/null @@ -1,27 +0,0 @@ ---- -title: "Frequently Asked Questions" -draft: false -menu: - docs: - title: - parent: "Quartz64" - identifier: "Quartz64/Frequently_Asked_Questions" - weight: 4 ---- - -== Do I Need A Fan/What Heatsink Do I Need? - -You don't need a fan. The https://pine64.com/product/rockpro64-20mm-mid-profile-heatsink/[20mm medium heatsink for Model A is plenty enough]. For Model B, the https://pine64.com/product/small-fan-type-heatsink/[fan type heatsink] will do fine. - -== Can This Run A Minecraft Server? - -Yes! Sort of. Testing on an 8GB Model A with PaperMC, User:CounterPillow was able to out-row world generation in a boat with just one player online, but aside from the slow world gen (which can be pre-generated) the server handled things like TNT explosions and mobs fine. It'll probably do okay with 1-3 players. - -== Do I Need The 5A Power Supply For Model A? - -You only need the 5A power supply for Model A if you plan on connecting hard disk drives to the 12V header on the board. - -== How Much Power Does It Consume? - -For Model B, it's <2W in idle (powertop tunables not set), and <5W under full CPU load (`stress-ng -c4`). Model A will be similar as it's the same SoC. - diff --git a/content/documentation/Quartz64/Frequently_Asked_Questions.md b/content/documentation/Quartz64/Frequently_Asked_Questions.md new file mode 100644 index 00000000..1357f3a3 --- /dev/null +++ b/content/documentation/Quartz64/Frequently_Asked_Questions.md @@ -0,0 +1,26 @@ +--- +title: "Frequently Asked Questions" +draft: false +menu: + docs: + title: + parent: "Quartz64" + identifier: "Quartz64/Frequently_Asked_Questions" + weight: 4 +--- + +## Do I Need A Fan/What Heatsink Do I Need? + +You don’t need a fan. The [20mm medium heatsink for Model A is plenty enough](https://pine64.com/product/rockpro64-20mm-mid-profile-heatsink/). For Model B, the [fan type heatsink](https://pine64.com/product/small-fan-type-heatsink/) will do fine. + +## Can This Run A Minecraft Server? + +Yes! Sort of. Testing on an 8GB Model A with PaperMC, User:CounterPillow was able to out-row world generation in a boat with just one player online, but aside from the slow world gen (which can be pre-generated) the server handled things like TNT explosions and mobs fine. It’ll probably do okay with 1-3 players. + +## Do I Need The 5A Power Supply For Model A? + +You only need the 5A power supply for Model A if you plan on connecting hard disk drives to the 12V header on the board. + +## How Much Power Does It Consume? + +For Model B, it’s <2W in idle (powertop tunables not set), and <5W under full CPU load (`stress-ng -c4`). Model A will be similar as it’s the same SoC. diff --git a/content/documentation/Quartz64/Further_information/Datasheets.adoc b/content/documentation/Quartz64/Further_information/Datasheets.adoc deleted file mode 100644 index 119a8842..00000000 --- a/content/documentation/Quartz64/Further_information/Datasheets.adoc +++ /dev/null @@ -1,77 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "Quartz64/Further_information" - identifier: "Quartz64/Further_information/Datasheets" - weight: ---- - -Rockchip RK3566 SoC information: - -* https://files.pine64.org/doc/quartz64/Rockchip%20RK3566%20Datasheet%20V1.0-20201210.pdf[Rockchip RK3566 ver 1.0 datasheet, already got release permission from Rockchip] -* https://opensource.rock-chips.com/images/2/26/Rockchip_RK3568_TRM_Part1_V1.3-20220930P.PDF[Rockchip RK3566 and RK3568 TRM (Technical Reference Manual)] - -Rockchip PMU (Power Management Unit) Information: - -* https://www.rockchip.fr/RK817%20datasheet%20V1.01.pdf[Rockchip RK817 ver 1.01 datasheet for Quartz64 model A] -* https://www.rockchip.fr/RK809%20datasheet%20V1.01.pdf[Rockchip RK809 ver 1.01 datasheet for Quartz64 model B and SOQuartz] - -LPDDR4 (200 Balls) SDRAM: - -* https://files.pine64.org/doc/datasheet/rockpro64/SM512M32Z01MD2BNP(200BALL).pdf[Micron LPDDR4 Mobile LPDDR4 Datasheet] - -eMMC information: - -* https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf[PINE64 eMMC module schematic] -* https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf[PINE64 USB adapter for eMMC module V2 schematic] -* https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar[PINE64 USB adapter for eMMC module PCB in JPEG] -* https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf[16GB Foresee eMMC Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf[32GB/64GB/128GB SanDisk eMMC Datasheet] - -SPI NOR Flash information: - -* https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf[WinBond 128Mb SPI Flash Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf[GigaDevice 128Mb SPI Flash Datasheet] - -E-ink Panel information: - -* https://files.pine64.org/doc/quartz64/Eink%20P-511-754-V3_ES103TC1%20Specification%20V3.0(Signed)-20190702.pdf[Eink 10.3" 1872x1404 ES103TC1 Flex Panel Specification] -* https://files.pine64.org/doc/quartz64/Eink%20P-511-828-V1_ED103TC2%20Formal%20Spec%20V1.0_20190514.pdf[Eink 10.3" 1872x1404 ES103TC1 Glass Panel Specification] -* https://files.pine64.org/doc/datasheet/PineNote/TI%20PMU-TPS651851.pdf[TPS65185x PMIC for E-Ink Enabled Electronic Paper Display Datasheet] - -LCD Touch Screen Panel information: - -* https://files.pine64.org/doc/datasheet/pine64/FY07024DI26A30-D_feiyang_LCD_panel.pdf[7.0" 1024x600 TFT-LCD Panel Specification] -* https://files.pine64.org/doc/datasheet/pine64/HK70DR2459-PG-V01.pdf[Touch Panel Specification] -* https://files.pine64.org/doc/datasheet/pine64/GT911%20Capacitive%20Touch%20Controller%20Datasheet.pdf[GOODiX GT911 5-Point Capacitive Touch Controller Datasheet] - -Ethernet PHY information: - -* https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf[Realtek RTL8211 10/100/1000M Ethernet Transceiver] - -Wi-Fi/BT module info: - -* https://files.pine64.org/doc/datasheet/rockpro64/AW-CM256SM_DS_DF_V1.9_STD.pdf[Azurewave CM256SM 11AC Wi-Fi + Bluetooth 5.0 datasheet for model A and B] -* https://files.pine64.org/doc/datasheet/quartz64/AIC8800DC%20Datasheet%20v1.0.pdf[AICSemi AIC8800DC 11AX Wi-Fi + Bluetooth 5.2 datasheet for model "Zero"] - -IR LED: - -* https://media.digikey.com/pdf/Data%20Sheets/Everlight%20PDFs/IRM-36xx_Series.pdf[IRM-3638 Datasheet] - -Enclosure information: - -* https://files.pine64.org/doc/datasheet/case/playbox_enclosure_20160426.stp[Playbox Enclosure 3D file] -* https://files.pine64.org/doc/datasheet/case/ABS_enclosure_20160426.stp[ABS Enclosure 3D file] -* https://files.pine64.org/doc/datasheet/case/pine64%20Die%20Cast%20casing-final.jpg[Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing] -* https://www.printables.com/model/269572-pine-quartz-64-a-full-case[3D Printable Enclosure for Model A] -* https://www.printables.com/model/269575-pine-quartz-64-a-open-frame[Open Frame for Model A] - -Connector information: - -* https://files.pine64.org/doc/datasheet/pine64/ePH.pdf[2.0mm PH Type connector specification use in Lithium Battery (VBAT) port (Model A)] -* https://www.molex.com/pdm_docs/sd/533980271_sd.pdf[1.25mm Picoblade Type connector specification used in RTC Battery port (Model B)] -* https://files.pine64.org/doc/datasheet/pine64/0.5FPC%20Front%20Open%20Connector%20H=1.5.pdf[0.5mm Pitch cover type FPC connector specification use in DSI port, TP port and CSI port] - diff --git a/content/documentation/Quartz64/Further_information/Datasheets.md b/content/documentation/Quartz64/Further_information/Datasheets.md new file mode 100644 index 00000000..3fc50ced --- /dev/null +++ b/content/documentation/Quartz64/Further_information/Datasheets.md @@ -0,0 +1,76 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "Quartz64/Further_information" + identifier: "Quartz64/Further_information/Datasheets" + weight: +--- + +Rockchip RK3566 SoC information: + +* [Rockchip RK3566 ver 1.0 datasheet, already got release permission from Rockchip](https://files.pine64.org/doc/quartz64/Rockchip%20RK3566%20Datasheet%20V1.0-20201210.pdf) +* [Rockchip RK3566 and RK3568 TRM (Technical Reference Manual)](https://opensource.rock-chips.com/images/2/26/Rockchip_RK3568_TRM_Part1_V1.3-20220930P.PDF) + +Rockchip PMU (Power Management Unit) Information: + +* [Rockchip RK817 ver 1.01 datasheet for Quartz64 model A](https://www.rockchip.fr/RK817%20datasheet%20V1.01.pdf) +* [Rockchip RK809 ver 1.01 datasheet for Quartz64 model B and SOQuartz](https://www.rockchip.fr/RK809%20datasheet%20V1.01.pdf) + +LPDDR4 (200 Balls) SDRAM: + +* [Micron LPDDR4 Mobile LPDDR4 Datasheet](https://files.pine64.org/doc/datasheet/rockpro64/SM512M32Z01MD2BNP(200BALL).pdf) + +eMMC information: + +* [PINE64 eMMC module schematic](https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf) +* [PINE64 USB adapter for eMMC module V2 schematic](https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf) +* [PINE64 USB adapter for eMMC module PCB in JPEG](https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar) +* [16GB Foresee eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf) +* [32GB/64GB/128GB SanDisk eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf) + +SPI NOR Flash information: + +* [WinBond 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf) +* [GigaDevice 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf) + +E-ink Panel information: + +* [Eink 10.3" 1872x1404 ES103TC1 Flex Panel Specification](https://files.pine64.org/doc/quartz64/Eink%20P-511-754-V3_ES103TC1%20Specification%20V3.0(Signed)-20190702.pdf) +* [Eink 10.3" 1872x1404 ES103TC1 Glass Panel Specification](https://files.pine64.org/doc/quartz64/Eink%20P-511-828-V1_ED103TC2%20Formal%20Spec%20V1.0_20190514.pdf) +* [TPS65185x PMIC for E-Ink Enabled Electronic Paper Display Datasheet](https://files.pine64.org/doc/datasheet/PineNote/TI%20PMU-TPS651851.pdf) + +LCD Touch Screen Panel information: + +* [7.0" 1024x600 TFT-LCD Panel Specification](https://files.pine64.org/doc/datasheet/pine64/FY07024DI26A30-D_feiyang_LCD_panel.pdf) +* [Touch Panel Specification](https://files.pine64.org/doc/datasheet/pine64/HK70DR2459-PG-V01.pdf) +* [GOODiX GT911 5-Point Capacitive Touch Controller Datasheet](https://files.pine64.org/doc/datasheet/pine64/GT911%20Capacitive%20Touch%20Controller%20Datasheet.pdf) + +Ethernet PHY information: + +* [Realtek RTL8211 10/100/1000M Ethernet Transceiver](https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf) + +Wi-Fi/BT module info: + +* [Azurewave CM256SM 11AC Wi-Fi + Bluetooth 5.0 datasheet for model A and B](https://files.pine64.org/doc/datasheet/rockpro64/AW-CM256SM_DS_DF_V1.9_STD.pdf) +* [AICSemi AIC8800DC 11AX Wi-Fi + Bluetooth 5.2 datasheet for model "Zero"](https://files.pine64.org/doc/datasheet/quartz64/AIC8800DC%20Datasheet%20v1.0.pdf) + +IR LED: + +* [IRM-3638 Datasheet](https://media.digikey.com/pdf/Data%20Sheets/Everlight%20PDFs/IRM-36xx_Series.pdf) + +Enclosure information: + +* [Playbox Enclosure 3D file](https://files.pine64.org/doc/datasheet/case/playbox_enclosure_20160426.stp) +* [ABS Enclosure 3D file](https://files.pine64.org/doc/datasheet/case/ABS_enclosure_20160426.stp) +* [Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing](https://files.pine64.org/doc/datasheet/case/pine64%20Die%20Cast%20casing-final.jpg) +* [3D Printable Enclosure for Model A](https://www.printables.com/model/269572-pine-quartz-64-a-full-case) +* [Open Frame for Model A](https://www.printables.com/model/269575-pine-quartz-64-a-open-frame) + +Connector information: + +* [2.0mm PH Type connector specification use in Lithium Battery (VBAT) port (Model A)](https://files.pine64.org/doc/datasheet/pine64/ePH.pdf) +* [1.25mm Picoblade Type connector specification used in RTC Battery port (Model B)](https://www.molex.com/pdm_docs/sd/533980271_sd.pdf) +* [0.5mm Pitch cover type FPC connector specification use in DSI port, TP port and CSI port](https://files.pine64.org/doc/datasheet/pine64/0.5FPC%20Front%20Open%20Connector%20H=1.5.pdf) diff --git a/content/documentation/Quartz64/Further_information/Schematics_and_certifications.adoc b/content/documentation/Quartz64/Further_information/Schematics_and_certifications.md similarity index 53% rename from content/documentation/Quartz64/Further_information/Schematics_and_certifications.adoc rename to content/documentation/Quartz64/Further_information/Schematics_and_certifications.md index 62950a09..a066e386 100644 --- a/content/documentation/Quartz64/Further_information/Schematics_and_certifications.adoc +++ b/content/documentation/Quartz64/Further_information/Schematics_and_certifications.md @@ -9,7 +9,7 @@ menu: weight: --- -== Model "A" +## Model "A" Model "A" Baseboard Dimensions: 133mm x 80mm x 19mm @@ -17,16 +17,16 @@ Input Power: DC 12V @ 3A 5.5mmOD/2.1mmID center-positive Barrel DC Jack connecto Quartz64 Model "A" SBC Schematic and PCB Board Resource: -* https://files.pine64.org/doc/quartz64/Quartz64_model-A_schematic_v2.0_20210427.pdf[Quartz64 Model "A" SBC Schematic ver 2.0 20210427 PDF file] -* https://files.pine64.org/doc/quartz64/Quartz64_model-A_V2.0_connector_placement.pdf[Quartz64 Model "A" SBC PCB Connector placement PDF file] +* [Quartz64 Model "A" SBC Schematic ver 2.0 20210427 PDF file](https://files.pine64.org/doc/quartz64/Quartz64_model-A_schematic_v2.0_20210427.pdf) +* [Quartz64 Model "A" SBC PCB Connector placement PDF file](https://files.pine64.org/doc/quartz64/Quartz64_model-A_V2.0_connector_placement.pdf) Certifications: * Disclaimer: Please note that PINE64 SBC is not a "final" product and in general certification is not necessary. However, PINE64 still submit the SBC for FCC and CE certification and obtain the certificates to proof that SBC board is capable on passing the testing. Please note a final commercial product needs to performs its owns testing and obtains its owns certificates. -* https://files.pine64.org/doc/cert/Quartz64%20Model-A%20CE%20certification-S21051101701001.pdf[Quartz64 model-A CE Certificate] -* https://files.pine64.org/doc/cert/Quartz64%20Model-A%20FCC%20certification-S21051101702001.pdf[Quartz64 model-A FCC Certificate] +* [Quartz64 model-A CE Certificate](https://files.pine64.org/doc/cert/Quartz64%20Model-A%20CE%20certification-S21051101701001.pdf) +* [Quartz64 model-A FCC Certificate](https://files.pine64.org/doc/cert/Quartz64%20Model-A%20FCC%20certification-S21051101702001.pdf) -== Model "B" +## Model "B" Model "B" Baseboard Dimensions: 85mm x 56mm x 18.8mm @@ -34,12 +34,12 @@ Input Power: DC 5V @ 3A 3.5mmOD/1.35mmID center-positive Barrel DC Jack connecto Quartz64 Model "B" SBC Schematic and PCB Board Resource: -* https://files.pine64.org/doc/quartz64/Quartz64_model-B_Schematic-V1.3_20220124.pdf[Quartz64 Model "B" SBC Schematic ver 1.3 20220124 PDF file] -* https://files.pine64.org/doc/quartz64/Quartz64_model-B_PCB_Components_Placement-V1.2_20211014.pdf[Quartz64 Model "B" SBC PCB Connector placement PDF file] +* [Quartz64 Model "B" SBC Schematic ver 1.3 20220124 PDF file](https://files.pine64.org/doc/quartz64/Quartz64_model-B_Schematic-V1.3_20220124.pdf) +* [Quartz64 Model "B" SBC PCB Connector placement PDF file](https://files.pine64.org/doc/quartz64/Quartz64_model-B_PCB_Components_Placement-V1.2_20211014.pdf) * Please note that v1.2 and V1.3 schematic and component placement are identical, just some component value changed. * Note: Model B uses a Molex PicoBlade compatible connector for the RTC battery. The Pine64 Backup Battery Holders come with a JST PH type connector. To use the Pine64 RTC Backup Battery Holder, the connector on the battery holder will need to be modified with a PicoBlade type connector. -== Model "Zero" +## Model "Zero" Model "Zero" Baseboard Dimensions: 85mm x 56mm x 18.8mm @@ -47,6 +47,6 @@ Input Power: DC 5V @ 3A 3.5mmOD/1.35mmID center-positive Barrel DC Jack connecto Quartz64 Model "Zero" SBC Schematic and PCB Board Resource: -* https://files.pine64.org/doc/quartz64/Quartz64-ZERO_Schematic_v01_20240428.pdf[Quartz64 Model "Zero" SBC Schematic ver 1.0 20240428 PDF file] -* https://files.pine64.org/doc/quartz64/Quartz64-ZERO_Component_Placement_Top_v01_20240428.pdf[Quartz64 Model "Zero" SBC PCB Component placement (top side) PDF file] -* https://files.pine64.org/doc/quartz64/Quartz64-ZERO_Component_Placement_Bottom_v01_20240428.pdf[Quartz64 Model "Zero" SBC PCB Component placement (bottom side) PDF file] \ No newline at end of file +* [Quartz64 Model "Zero" SBC Schematic ver 1.0 20240428 PDF file](https://files.pine64.org/doc/quartz64/Quartz64-ZERO_Schematic_v01_20240428.pdf) +* [Quartz64 Model "Zero" SBC PCB Component placement (top side) PDF file](https://files.pine64.org/doc/quartz64/Quartz64-ZERO_Component_Placement_Top_v01_20240428.pdf) +* [Quartz64 Model "Zero" SBC PCB Component placement (bottom side) PDF file](https://files.pine64.org/doc/quartz64/Quartz64-ZERO_Component_Placement_Bottom_v01_20240428.pdf) diff --git a/content/documentation/Quartz64/Further_information/Specifications.adoc b/content/documentation/Quartz64/Further_information/Specifications.md similarity index 51% rename from content/documentation/Quartz64/Further_information/Specifications.adoc rename to content/documentation/Quartz64/Further_information/Specifications.md index d85e792c..98b9e3f3 100644 --- a/content/documentation/Quartz64/Further_information/Specifications.adoc +++ b/content/documentation/Quartz64/Further_information/Specifications.md @@ -9,23 +9,23 @@ menu: weight: --- -* Based on https://www.rock-chips.com/a/en/products/RK35_Series/2021/0113/1274.html[Rockchip RK3566] +* Based on [Rockchip RK3566](https://www.rock-chips.com/a/en/products/RK35_Series/2021/0113/1274.html) -== CPU Architecture +## CPU Architecture -* https://developer.arm.com/ip-products/processors/cortex-a/cortex-a55[Quad-core ARM Cortex-A55@1.8GHz] +* [Quad-core ARM Cortex-A55@1.8GHz](https://developer.arm.com/ip-products/processors/cortex-a/cortex-a55) * AArch32 for full backwards compatibility with ARMv7 * ARM Neon Advanced SIMD (single instruction, multiple data) support for accelerated media and signal processing computation * Includes VFP hardware to support single and double-precision operations * ARMv8 Cryptography Extensions * Integrated 32KB L1 instruction cache and 32KB L1 data cache per core * 512KB unified system L3 cache -* https://developer.arm.com/ip-products/security-ip/trustzone[TrustZone] technology support -* https://www.cnx-software.com/2020/12/01/rockchip-rk3568-processor-to-power-edge-computing-and-nvr-applications[22nm process, believed to be FD-SOI] +* [TrustZone](https://developer.arm.com/ip-products/security-ip/trustzone) technology support +* [22nm process, believed to be FD-SOI](https://www.cnx-software.com/2020/12/01/rockchip-rk3568-processor-to-power-edge-computing-and-nvr-applications) -== GPU (Graphics Processing Unit) Capabilities +## GPU (Graphics Processing Unit) Capabilities -* https://developer.arm.com/ip-products/graphics-and-multimedia/mali-gpus/mali-g52-gpu[Mali-G52 2EE Bifrost GPU@800MHz] +* [Mali-G52 2EE Bifrost GPU@800MHz](https://developer.arm.com/ip-products/graphics-and-multimedia/mali-gpus/mali-g52-gpu) * 4x Multi-Sampling Anti-Aliasing (MSAA) with minimal performance drop * 128KB L2 Cache configurations * Supports OpenGL ES 1.1, 2.0, and 3.2 @@ -34,42 +34,44 @@ menu: * Supports 1600 Mpix/s fill rate when at 800MHz clock frequency * Supports 38.4 GLOP/s when at 800MHz clock frequency -== NPU (Neural Processing Unit) Capabilities +## NPU (Neural Processing Unit) Capabilities * Neural network acceleration engine with processing performance of up to 0.8 TOPS * Supports integer 8 and integer 16 convolution operations * Supports the following deep learning frameworks: TensorFlow, TF-lite, Pytorch, Caffe, ONNX, MXNet, Keras, Darknet -== System Memory +## System Memory * RAM Memory Variants: 2GB (SOQuartz only), 4GB, 8GB LPDDR4. -== Network +## Network * 10/100/1000Mbps Ethernet * Wi-Fi 802.11 b/g/n/ac with Bluetooth 5.0 (optional on model A, built in on model B) -== Storage +## Storage * microSD - bootable, supports SDHC and SDXC, storage up to 2TB * USB -** Model A: 2 USB 2.0 host ports, 1 USB 2.0 OTG port, 1 USB 3.0 host port -** Model B: 1 USB 2.0 host port, 1 USB 2.0 OTG port, 1 USB 3.0 host port + * Model A: 2 USB 2.0 host ports, 1 USB 2.0 OTG port, 1 USB 3.0 host port + * Model B: 1 USB 2.0 host port, 1 USB 2.0 OTG port, 1 USB 3.0 host port * one native SATA 3.0 6Gb/s Port (only on model A, shared with USB 3.0 host port) (removed in newer revisions due to electrical signalling issues it caused) * optional eMMC module from 8GB up to 128GB -* 64 Mbit (8 MByte) SPI flash (Model B only), part number *25Q64DWZPIG* in the schematic +* 64 Mbit (8 MByte) SPI flash (Model B only), part number **25Q64DWZPIG** in the schematic -=== eMMC Speeds +### eMMC Speeds On a 64 GB eMMC module: - $ sudo hdparm -tT /dev/mmcblk1 +```console +$ sudo hdparm -tT /dev/mmcblk1 +``` - /dev/mmcblk1: - Timing cached reads: 2368 MB in 2.00 seconds = 1184.46 MB/sec - Timing buffered disk reads: 452 MB in 3.01 seconds = 149.98 MB/sec + /dev/mmcblk1: + Timing cached reads: 2368 MB in 2.00 seconds = 1184.46 MB/sec + Timing buffered disk reads: 452 MB in 3.01 seconds = 149.98 MB/sec -== Expansion Ports +## Expansion Ports * HDMI * eDP - 4 lanes of 2.7Gbps, up to 2560x1600@60Hz (only on model A) @@ -81,81 +83,36 @@ On a 64 GB eMMC module: * Wi-Fi/BT Module Header - SDIO 3.0 and UART on model A, built-in Wi-Fi/BT Module on model B * 2x20 pins "Pi2" GPIO Header on model B, 2x10 pins GPO header on model A * PCIe x4 open ended slot on model A, m.2 slot on model B, one Gen2 lane due to SoC constraints -** On Model A, the slot provides 10W of power for the 3.3V supply and however much power your 12V input power supply provides on the 12V supply + * On Model A, the slot provides 10W of power for the 3.3V supply and however much power your 12V input power supply provides on the 12V supply The PCIe implementation on the RK3566 is much more compatible with a wide range of devices compared to the one on the RK3399 used on the ROCKPro64. This means a lot more devices should work (excluding dGPUs due to a lack of cache snooping ability). -=== Combo PHYs +### Combo PHYs -image:/documentation/images/rk3566_phy.png[width=400] +![width=400](/documentation/images/rk3566_phy.png) Several of the I/O options on the RK3566 used in the Quartz64 are using the same I/O lines, meaning that they cannot be used at the same time. The above diagram illustrates how they are connected. In particular, USB 3.0 and the SATA connector on the board are mutually exclusive, and the PCI-e 2.0 lane can be reconfigured into a second SATA port, though an adapter cable needs to be fashioned for this to be useful. -== GPIO Pins (Quartz64 Model A) +## GPIO Pins (Quartz64 Model A) Attention! GPIOs are 3.3V! -[%header, cols="1,1,1,1"] -|=== -| Assigned To -| Pin no. -| Pin no. -| Assigned To - -| 3.3 V -| 1 -| 2 -| 5 V - -| I2C3_SDA_M0 ^a,b^ -| 3 -| 4 -| 5 V - -| I2C3_SCL_M0 ^a,b^ -| 5 -| 6 -| GND - -| CPU_REFCLK_OUT -| 7 -| 8 -| UART2_TX_M0_DEBUG - -| GND -| 9 -| 10 -| UART2_RX_M0_DEBUG - -| SPI1_MOSI_M1 -| 11 -| 12 -| UART0_TX ^a^ - -| SPI1_MISO_M1 -| 13 -| 14 -| UART0_RX ^a^ - -| SPI1_CLK_M1 -| 15 -| 16 -| GND - -| SPI1_CS0_M1 -| 17 -| 18 -| SPDIF_OUT ^c^ - -| GND -| 19 -| 20 -| 3.3V -|=== - -=== Notes +| Assigned To | +| --- | --- | --- | --- | +| Pin no. | Pin no. | Assigned To | 3.3 V | +| 1 | 2 | 5 V | I2C3_SDA_M0 ^a,b^ | +| 3 | 4 | 5 V | I2C3_SCL_M0 ^a,b^ | +| 5 | 6 | GND | CPU_REFCLK_OUT | +| 7 | 8 | UART2_TX_M0_DEBUG | GND | +| 9 | 10 | UART2_RX_M0_DEBUG | SPI1_MOSI_M1 | +| 11 | 12 | UART0_TX ^a^ | SPI1_MISO_M1 | +| 13 | 14 | UART0_RX ^a^ | SPI1_CLK_M1 | +| 15 | 16 | GND | SPI1_CS0_M1 | +| 17 | 18 | SPDIF_OUT ^c^ | GND | + +### Notes a: can be a PWM pin @@ -163,121 +120,35 @@ b: pulled high to 3.3V through 2.2kOhm resistor c: low-pass filtered with cutoff of 220 MHz -Source: Page 28 of https://wiki.pine64.org/wiki/File:Quartz64_model-A_schematic_v1.0_20201215.pdf[the board schematics]. +Source: Page 28 of [the board schematics](https://wiki.pine64.org/wiki/File:Quartz64_model-A_schematic_v1.0_20201215.pdf). -== GPIO Pins (Quartz64 Model B) +## GPIO Pins (Quartz64 Model B) Attention! GPIOs are 3.3V! Interesting alternate pin configurations are listed in [brackets]. -[%header, cols="1,1,1,1"] -|=== -| Assigned To -| Pin no. -| Pin no. -| Assigned To - -| 3.3 V -| 1 -| 2 -| 5 V - -| _[I2C3_SDA_M0]_ GPIO1_A0_3V3 -| 3 -| 4 -| 5 V - -| _[I2C3_SCL_M0]_ GPIO1_A1_3V3 -| 5 -| 6 -| GND - -| GPIO3_C4_3V3 -| 7 -| 8 -| UART2_TX - -| GND -| 9 -| 10 -| UART2_RX - -| _[SPI1_CS0_M1]_ GPIO3_A1_3V3 -| 11 -| 12 -| GPIO3_A3_3V3 _[I2S3_SCLK_M0]_ - -| _[I2S3_MCLK_M0]_ GPIO3_A2_3V3 -| 13 -| 14 -| GND - -| GPIO3_B0_3V3 -| 15 -| 16 -| GPIO3_B1_3V3 - -| 3.3V -| 17 -| 18 -| GPIO3_B2_3V3 - -| GPIO4_C3_3V3 -| 19 -| 20 -| GND - -| GPIO4_C5_3V3 -| 21 -| 22 -| GPIO3_C1_3V3 _[SPI1_MOSI_M1]_ - -| GPIO4_C2_3V3 -| 23 -| 24 -| GPIO4_C6_3V3 - -| GND -| 25 -| 26 -| GPIO4_D1_3V3 - -| I2C4_SDA_M0 -| 27 -| 28 -| I2C4_SCL_M0 - -| GPIO3_B3_3V3 -| 29 -| 30 -| GND - -| GPIO3_B4_3V3 -| 31 -| 32 -| GPIO3_C2_3V3 _[SPI1_MISO_M1]_ - -| _[SPI1_CLK_M1]_ GPIO3_C3_3V3 -| 33 -| 34 -| GND - -| _[I2S3_LRCK_M0]_ GPIO3_A4_3V3 -| 35 -| 36 -| GPIO3_A7_3V3 - -| _[SPDIF_TX_M0]_ GPIO1_A4_3V3 -| 37 -| 38 -| GPIO3_A6_3V3 _[I2S3_SDI_M0]_ - -| GND -| 39 -| 40 -| GPIO3_A5_3V3 _[I2S3_SDO_M0]_ -|=== - -Source: Page 24 of https://files.pine64.org/doc/quartz64/Quartz64_model-B_Schematic-V1.3_20220124.pdf[the board schematics]. - +| Assigned To | +| --- | --- | --- | --- | +| Pin no. | Pin no. | Assigned To | 3.3 V | +| 1 | 2 | 5 V | _[I2C3_SDA_M0]_ GPIO1_A0_3V3 | +| 3 | 4 | 5 V | _[I2C3_SCL_M0]_ GPIO1_A1_3V3 | +| 5 | 6 | GND | GPIO3_C4_3V3 | +| 7 | 8 | UART2_TX | GND | +| 9 | 10 | UART2_RX | _[SPI1_CS0_M1]_ GPIO3_A1_3V3 | +| 11 | 12 | GPIO3_A3_3V3 _[I2S3_SCLK_M0]_ | _[I2S3_MCLK_M0]_ GPIO3_A2_3V3 | +| 13 | 14 | GND | GPIO3_B0_3V3 | +| 15 | 16 | GPIO3_B1_3V3 | 3.3V | +| 17 | 18 | GPIO3_B2_3V3 | GPIO4_C3_3V3 | +| 19 | 20 | GND | GPIO4_C5_3V3 | +| 21 | 22 | GPIO3_C1_3V3 _[SPI1_MOSI_M1]_ | GPIO4_C2_3V3 | +| 23 | 24 | GPIO4_C6_3V3 | GND | +| 25 | 26 | GPIO4_D1_3V3 | I2C4_SDA_M0 | +| 27 | 28 | I2C4_SCL_M0 | GPIO3_B3_3V3 | +| 29 | 30 | GND | GPIO3_B4_3V3 | +| 31 | 32 | GPIO3_C2_3V3 _[SPI1_MISO_M1]_ | _[SPI1_CLK_M1]_ GPIO3_C3_3V3 | +| 33 | 34 | GND | _[I2S3_LRCK_M0]_ GPIO3_A4_3V3 | +| 35 | 36 | GPIO3_A7_3V3 | _[SPDIF_TX_M0]_ GPIO1_A4_3V3 | +| 37 | 38 | GPIO3_A6_3V3 _[I2S3_SDI_M0]_ | GND | + +Source: Page 24 of [the board schematics](https://files.pine64.org/doc/quartz64/Quartz64_model-B_Schematic-V1.3_20220124.pdf). diff --git a/content/documentation/Quartz64/Getting_started.adoc b/content/documentation/Quartz64/Getting_started.adoc deleted file mode 100644 index 17eef56b..00000000 --- a/content/documentation/Quartz64/Getting_started.adoc +++ /dev/null @@ -1,26 +0,0 @@ ---- -title: "Getting started" -draft: false -menu: - docs: - title: - parent: "Quartz64" - identifier: "Quartz64/Getting_started" - weight: 1 ---- - -== Flashing the device - -Natively the board only supports booting the platform firmware from SPI, the eMMC or a microSD card, see link:#boot_order[boot order]. The platform firmware loaded from there (U-Boot, EDK2, ...) may then allow loading kernels from additional storage mediums or even the network, and they will have their own boot order. - -The board can be booted by flashing your chosen operating system to a microSD card using another device and inserting the microSD card into the Quartz64, see the article link:/documentation/Introduction/Getting_started[Getting started]. Flashing the eMMC is possible by booting an operating system from the microSD card and overwriting the eMMC from within the booted operating system, or by using https://pine64.com/product/usb-adapter-for-emmc-module/[the USB eMMC adapter]. - -== Boot order - -The hardware boot order of the Quartz64 is: - -. SPI NOR flash -. SPI NAND flash -. eMMC -. microSD card - diff --git a/content/documentation/Quartz64/Getting_started.md b/content/documentation/Quartz64/Getting_started.md new file mode 100644 index 00000000..687a443b --- /dev/null +++ b/content/documentation/Quartz64/Getting_started.md @@ -0,0 +1,25 @@ +--- +title: "Getting started" +draft: false +menu: + docs: + title: + parent: "Quartz64" + identifier: "Quartz64/Getting_started" + weight: 1 +--- + +## Flashing the device + +Natively the board only supports booting the platform firmware from SPI, the eMMC or a microSD card, see [boot order](#boot_order). The platform firmware loaded from there (U-Boot, EDK2, ...) may then allow loading kernels from additional storage mediums or even the network, and they will have their own boot order. + +The board can be booted by flashing your chosen operating system to a microSD card using another device and inserting the microSD card into the Quartz64, see the article [Getting started](/documentation/Introduction/Getting_started). Flashing the eMMC is possible by booting an operating system from the microSD card and overwriting the eMMC from within the booted operating system, or by using [the USB eMMC adapter](https://pine64.com/product/usb-adapter-for-emmc-module/). + +## Boot order + +The hardware boot order of the Quartz64 is: + +1. SPI NOR flash +2. SPI NAND flash +3. eMMC +4. microSD card diff --git a/content/documentation/QuartzPro64/Boot.adoc b/content/documentation/QuartzPro64/Boot.md similarity index 99% rename from content/documentation/QuartzPro64/Boot.adoc rename to content/documentation/QuartzPro64/Boot.md index 1cf5f79d..46225fdb 100644 --- a/content/documentation/QuartzPro64/Boot.adoc +++ b/content/documentation/QuartzPro64/Boot.md @@ -18,4 +18,3 @@ The board can boot from the following interfaces: TODO: in which priority / order are those boot options tried ? TODO: Add unbricking informations (for example: can the SPI be rewritten with rkdeveloptool) - diff --git a/content/documentation/QuartzPro64/Hardware.adoc b/content/documentation/QuartzPro64/Hardware.adoc index afbc0cac..ff25fe03 100644 --- a/content/documentation/QuartzPro64/Hardware.adoc +++ b/content/documentation/QuartzPro64/Hardware.adoc @@ -59,6 +59,7 @@ Bus 005 Device 027: ID 0403:6001 Future Technology Devices International, Ltd FT Baud rate is 1.5 mbauds or 1500000. Ensure you have the driver module loaded: + ``` . modprobe ftdi_sio . lsmod | grep ftdi_sio @@ -68,6 +69,7 @@ usbcore 290816 7 ftdi_sio,usbserial,xhci_hcd,usbhid,usbkbd,usbmou ``` If the above is not working, check the required driver is supported by your kernel, using one of the following commands: + ``` $ zgrep FTDI_SIO /proc/config.gz CONFIG_USB_SERIAL_FTDI_SIO=m @@ -76,6 +78,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m ``` Using the `dmesg` command, you should see something like the following: + ``` [24784.535804] usb 5-3: new full-speed USB device number 3 using xhci_hcd [24784.710714] usb 5-3: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 diff --git a/content/documentation/QuartzPro64/Obtaining_a_Development_Board.adoc b/content/documentation/QuartzPro64/Obtaining_a_Development_Board.md similarity index 61% rename from content/documentation/QuartzPro64/Obtaining_a_Development_Board.adoc rename to content/documentation/QuartzPro64/Obtaining_a_Development_Board.md index 0fe90b3a..7353c060 100644 --- a/content/documentation/QuartzPro64/Obtaining_a_Development_Board.adoc +++ b/content/documentation/QuartzPro64/Obtaining_a_Development_Board.md @@ -9,4 +9,4 @@ menu: weight: 1 --- -Register for a preorder: https://preorder.pine64.org/#/quartzpro64[https://preorder.pine64.org/#/quartzpro64] \ No newline at end of file +Register for a preorder: [https://preorder.pine64.org//quartzpro64](https://preorder.pine64.org//quartzpro64) diff --git a/content/documentation/QuartzPro64/Resources.adoc b/content/documentation/QuartzPro64/Resources.adoc deleted file mode 100644 index 5cc5e61c..00000000 --- a/content/documentation/QuartzPro64/Resources.adoc +++ /dev/null @@ -1,44 +0,0 @@ ---- -title: "Resources" -draft: false -menu: - docs: - title: - parent: "QuartzPro64" - identifier: "QuartzPro64/Resources" - weight: 7 ---- - -== Kernel - -* http://lists.infradead.org/pipermail/linux-rockchip/[The linux-rockchip mailing list archives] -* https://patchwork.kernel.org/project/linux-rockchip/list/[linux-rockchip patchwork] -* https://github.com/neg2led/linux-quartz64[neggles / neg2led's mainline kernel repository with patches picked from the mailing list] -* https://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-misc.git/log/?h=rk3588[Sebastian Reichel's (SRE) rk3588 branch] -* https://github.com/rockchip-linux/kernel[Rockchip BSP kernel tree] -* https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux[Collabora RK3588 integration branch] -* https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3588/-/blob/main/mainline-status.md[Collabora Mainline Status Table] -* https://github.com/radxa/kernel/tree/stable-5.10-rock5[Radxa kernel tree, for reference, a lot is happening here] - -== Misc - -* The quartz64 and quartz-dev channels on the PINE64 chats (bridged IRC, Matrix, Discord and Telegram) -* https://gitlab.com/pine64-org/quartz-bsp/rkdeveloptool[PINE64 rkdeveloptool fork] -* https://github.com/CounterPillow/uboot-qp64[CounterPillow's uboot-qp64 repository], used with https://github.com/rockchip-linux/rkbin/[the official rkbin repository] -* https://opensource.rock-chips.com/wiki_Main_Page[Rockchip OpenSource wiki] -* https://github.com/collabora/rockchiprs[rockchiprs] (rkdeveloptool replacement written in Rust) - -== Documentation - -The documentation for the QuartzPro64 board and most of the documentation for the chips it uses hasn't been publicly released yet, but if you do own a QuartzPro64 board, the users CounterPillow and Dsimic will happily provide the documentation to you for the research or development purposes, if you ask them in the PINE64 chat channels. We've got the following documents, some of which can also be found elsewhere on the Internet rather easily: - -* RK3588 datasheet -* RK3588 technical reference manual (TRM), parts 1 and 2 -* RK3588 hardware design guide, machine translated to English from Chinese, and the original version in Chinese -* RK860 datasheet, including register descriptions -* RK806 datasheet, including register descriptions -* https://devzone.pine64.org/uploads/d392f228-d53b-11ec-9ab8-fe0395c0c83d/9fee695f-39a4-4858-a58a-c91b86d4fa2c/QuartzPro64-DevBoard-Schematic-V1.0_20220216.pdf[QuartzPro64 schematics] -* https://devzone.pine64.org/uploads/d392f228-d53b-11ec-9ab8-fe0395c0c83d/cf368836-966e-4c3c-9e0d-04a82a705d45/QuartzPro64-DevBoard-PCB-V1.0_20220216_topplace.pdf[QuartzPro64 PCB top layout] -* https://devzone.pine64.org/uploads/d392f228-d53b-11ec-9ab8-fe0395c0c83d/ec260213-d4f7-4c61-ad1f-40ee7b7b7a35/QuartzPro64-DevBoard-PCB-V1.0_20220216_bottomplace.pdf[QuartzPro64 PCB bottom layout] -* https://datasheet.lcsc.com/lcsc/2203311530_AMPAK-Tech-AP6275PR3_C2984106.pdf[AMPAK-Tech AP6275PR3 (Wi-Fi and Bluetooth module) datasheet] -* AMPAK AP6275P (Wi-Fi and Bluetooth module) datasheet \ No newline at end of file diff --git a/content/documentation/QuartzPro64/Resources.md b/content/documentation/QuartzPro64/Resources.md new file mode 100644 index 00000000..39a0aeeb --- /dev/null +++ b/content/documentation/QuartzPro64/Resources.md @@ -0,0 +1,44 @@ +--- +title: "Resources" +draft: false +menu: + docs: + title: + parent: "QuartzPro64" + identifier: "QuartzPro64/Resources" + weight: 7 +--- + +## Kernel + +* [The linux-rockchip mailing list archives](http://lists.infradead.org/pipermail/linux-rockchip/) +* [linux-rockchip patchwork](https://patchwork.kernel.org/project/linux-rockchip/list/) +* [neggles / neg2led’s mainline kernel repository with patches picked from the mailing list](https://github.com/neg2led/linux-quartz64) +* [Sebastian Reichel’s (SRE) rk3588 branch](https://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-misc.git/log/?h=rk3588) +* [Rockchip BSP kernel tree](https://github.com/rockchip-linux/kernel) +* [Collabora RK3588 integration branch](https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux) +* [Collabora Mainline Status Table](https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3588/-/blob/main/mainline-status.md) +* [Radxa kernel tree, for reference, a lot is happening here](https://github.com/radxa/kernel/tree/stable-5.10-rock5) + +## Misc + +* The quartz64 and quartz-dev channels on the PINE64 chats (bridged IRC, Matrix, Discord and Telegram) +* [PINE64 rkdeveloptool fork](https://gitlab.com/pine64-org/quartz-bsp/rkdeveloptool) +* [CounterPillow’s uboot-qp64 repository](https://github.com/CounterPillow/uboot-qp64), used with [the official rkbin repository](https://github.com/rockchip-linux/rkbin/) +* [Rockchip OpenSource wiki](https://opensource.rock-chips.com/wiki_Main_Page) +* [rockchiprs](https://github.com/collabora/rockchiprs) (rkdeveloptool replacement written in Rust) + +## Documentation + +The documentation for the QuartzPro64 board and most of the documentation for the chips it uses hasn’t been publicly released yet, but if you do own a QuartzPro64 board, the users CounterPillow and Dsimic will happily provide the documentation to you for the research or development purposes, if you ask them in the PINE64 chat channels. We’ve got the following documents, some of which can also be found elsewhere on the Internet rather easily: + +* RK3588 datasheet +* RK3588 technical reference manual (TRM), parts 1 and 2 +* RK3588 hardware design guide, machine translated to English from Chinese, and the original version in Chinese +* RK860 datasheet, including register descriptions +* RK806 datasheet, including register descriptions +* [QuartzPro64 schematics](https://devzone.pine64.org/uploads/d392f228-d53b-11ec-9ab8-fe0395c0c83d/9fee695f-39a4-4858-a58a-c91b86d4fa2c/QuartzPro64-DevBoard-Schematic-V1.0_20220216.pdf) +* [QuartzPro64 PCB top layout](https://devzone.pine64.org/uploads/d392f228-d53b-11ec-9ab8-fe0395c0c83d/cf368836-966e-4c3c-9e0d-04a82a705d45/QuartzPro64-DevBoard-PCB-V1.0_20220216_topplace.pdf) +* [QuartzPro64 PCB bottom layout](https://devzone.pine64.org/uploads/d392f228-d53b-11ec-9ab8-fe0395c0c83d/ec260213-d4f7-4c61-ad1f-40ee7b7b7a35/QuartzPro64-DevBoard-PCB-V1.0_20220216_bottomplace.pdf) +* [AMPAK-Tech AP6275PR3 (Wi-Fi and Bluetooth module) datasheet](https://datasheet.lcsc.com/lcsc/2203311530_AMPAK-Tech-AP6275PR3_C2984106.pdf) +* AMPAK AP6275P (Wi-Fi and Bluetooth module) datasheet diff --git a/content/documentation/QuartzPro64/TODOs.adoc b/content/documentation/QuartzPro64/TODOs.md similarity index 67% rename from content/documentation/QuartzPro64/TODOs.adoc rename to content/documentation/QuartzPro64/TODOs.md index bfbe7fa1..661faf6d 100644 --- a/content/documentation/QuartzPro64/TODOs.adoc +++ b/content/documentation/QuartzPro64/TODOs.md @@ -9,11 +9,10 @@ menu: weight: 5 --- -== Enable cpufreq Stuff +## Enable cpufreq Stuff -Current neggles kernel has the CPU at 1.2 GHz, apparently SRE has patches to enable cpufreq? (see in link:/documentation/QuartzPro64/Resources/#kernel[Resources]) +Current neggles kernel has the CPU at 1.2 GHz, apparently SRE has patches to enable cpufreq? (see in [Resources](/documentation/QuartzPro64/Resources/#kernel)) -== Add RK3588 Support To VOP2 +## Add RK3588 Support To VOP2 VOP2 IP on the RK3588 is very similar to the one on the RK356x, but it still needs platform specific code added. - diff --git a/content/documentation/ROCK64/Further_information/Certifications.adoc b/content/documentation/ROCK64/Further_information/Certifications.adoc deleted file mode 100644 index 659fab89..00000000 --- a/content/documentation/ROCK64/Further_information/Certifications.adoc +++ /dev/null @@ -1,16 +0,0 @@ ---- -title: "Certifications" -draft: false -menu: - docs: - title: - parent: "ROCK64/Further_information" - identifier: "ROCK64/Further_information/Certifications" - weight: ---- - -Certifications: - -* https://files.pine64.org/doc/cert/ROCK64%20FCC%20certification%20VOC20171129.pdf[ROCK64 FCC Certificate] -* https://files.pine64.org/doc/cert/ROCK64%20CE%20certification%20VOC20171129.pdf[ROCK64 CE Certificate] -* https://files.pine64.org/doc/cert/ROCK64%20ROHS%20certification%20VOC20170927.pdf[ROCK64 RoHS Certificate] \ No newline at end of file diff --git a/content/documentation/ROCK64/Further_information/Certifications.md b/content/documentation/ROCK64/Further_information/Certifications.md new file mode 100644 index 00000000..bda2d7af --- /dev/null +++ b/content/documentation/ROCK64/Further_information/Certifications.md @@ -0,0 +1,16 @@ +--- +title: "Certifications" +draft: false +menu: + docs: + title: + parent: "ROCK64/Further_information" + identifier: "ROCK64/Further_information/Certifications" + weight: +--- + +Certifications: + +* [ROCK64 FCC Certificate](https://files.pine64.org/doc/cert/ROCK64%20FCC%20certification%20VOC20171129.pdf) +* [ROCK64 CE Certificate](https://files.pine64.org/doc/cert/ROCK64%20CE%20certification%20VOC20171129.pdf) +* [ROCK64 RoHS Certificate](https://files.pine64.org/doc/cert/ROCK64%20ROHS%20certification%20VOC20170927.pdf) diff --git a/content/documentation/ROCK64/Further_information/Datasheets.adoc b/content/documentation/ROCK64/Further_information/Datasheets.adoc deleted file mode 100644 index e15ec864..00000000 --- a/content/documentation/ROCK64/Further_information/Datasheets.adoc +++ /dev/null @@ -1,53 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "ROCK64/Further_information" - identifier: "ROCK64/Further_information/Datasheets" - weight: ---- - -Rockchip RK3328 SoC information: - -* https://www.rock-chips.com/a/en/products/RK33_Series/2017/0118/829.html[Rockchip RK3328 SoC Brief] -* https://rockchip.fr/RK3328%20datasheet%20V1.2.pdf[Rockchip RK3328 Datasheet V1.2] -* https://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf[Rockchip RK3328 Technical Reference Manual part 1] -* https://files.pine64.org/doc/rock64/Rockchip_RK805_Datasheet_V1.1%C2%A020160921.pdf[Rockchip RK805 Datasheet V1.1] - -LPDDR3 (178 Balls) SDRAM: - -* https://files.pine64.org/doc/rock64/H9CCNNNCLTMLAR(Rev1.2).pdf[Hynix LPDDR3 Datasheet V1.2] -* https://files.pine64.org/doc/rock64/K4E8E324EB-EGCF000_DRAM_178F_11x11.5_Ver.1.00.00.pdf[Samsung LPDDR3 Datasheet V1.00.00] -* https://files.pine64.org/doc/rock64/SPECTEK_178B_32GB_V91M_MOBILE_LPDDR3.pdf[Spectek LPDDR3 Datasheet] - -eMMC information: - -* https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf[PINE64 eMMC module schematic] -* https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf[PINE64 USB adapter for eMMC module V2 schematic] -* https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar[PINE64 USB adapter for eMMC module PCB in JPEG] -* https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf[16GB Foresee eMMC Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf[32Gb/64GB/128GB SanDisk eMMC Datasheet] - -SPI NOR Flash information: - -* https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf[WinBond 128Mb SPI Flash Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf[GigaDevice 128Mb SPI Flash Datasheet] - -Ethernet related info: - -* https://files.pine64.org/doc/datasheet/rock64/RTL8211F-CG-Realtek.pdf[Realtek RTL8211F 10/100/1000M Ethernet Transceiver Datasheet] -* https://files.pine64.org/doc/rock64/DGKYD111B096GWA1D.pdf[10/100Mbps MegJack on Audio DAC POT board Datasheet] - -Peripheral related info: - -* https://files.pine64.org/doc/rock64/PDS-16002%20JMS578%20Datasheet%20(Rev.%201.01).pdf[JMicron JMS578 to SATA Datasheet] - -Enclosure information: - -* https://files.pine64.org/doc/datasheet/case/ROCK64%20Aluminum%20Waterproof%20Die%20Cast%20Casing.pdf[Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing] - -Remote control button mapping: - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg[Official Remote Control for the PINE A64 Button Mapping] \ No newline at end of file diff --git a/content/documentation/ROCK64/Further_information/Datasheets.md b/content/documentation/ROCK64/Further_information/Datasheets.md new file mode 100644 index 00000000..b8a59209 --- /dev/null +++ b/content/documentation/ROCK64/Further_information/Datasheets.md @@ -0,0 +1,53 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "ROCK64/Further_information" + identifier: "ROCK64/Further_information/Datasheets" + weight: +--- + +Rockchip RK3328 SoC information: + +* [Rockchip RK3328 SoC Brief](https://www.rock-chips.com/a/en/products/RK33_Series/2017/0118/829.html) +* [Rockchip RK3328 Datasheet V1.2](https://rockchip.fr/RK3328%20datasheet%20V1.2.pdf) +* [Rockchip RK3328 Technical Reference Manual part 1](https://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf) +* [Rockchip RK805 Datasheet V1.1](https://files.pine64.org/doc/rock64/Rockchip_RK805_Datasheet_V1.1%C2%A020160921.pdf) + +LPDDR3 (178 Balls) SDRAM: + +* [Hynix LPDDR3 Datasheet V1.2](https://files.pine64.org/doc/rock64/H9CCNNNCLTMLAR(Rev1.2).pdf) +* [Samsung LPDDR3 Datasheet V1.00.00](https://files.pine64.org/doc/rock64/K4E8E324EB-EGCF000_DRAM_178F_11x11.5_Ver.1.00.00.pdf) +* [Spectek LPDDR3 Datasheet](https://files.pine64.org/doc/rock64/SPECTEK_178B_32GB_V91M_MOBILE_LPDDR3.pdf) + +eMMC information: + +* [PINE64 eMMC module schematic](https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf) +* [PINE64 USB adapter for eMMC module V2 schematic](https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf) +* [PINE64 USB adapter for eMMC module PCB in JPEG](https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar) +* [16GB Foresee eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf) +* [32Gb/64GB/128GB SanDisk eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf) + +SPI NOR Flash information: + +* [WinBond 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf) +* [GigaDevice 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf) + +Ethernet related info: + +* [Realtek RTL8211F 10/100/1000M Ethernet Transceiver Datasheet](https://files.pine64.org/doc/datasheet/rock64/RTL8211F-CG-Realtek.pdf) +* [10/100Mbps MegJack on Audio DAC POT board Datasheet](https://files.pine64.org/doc/rock64/DGKYD111B096GWA1D.pdf) + +Peripheral related info: + +* [JMicron JMS578 to SATA Datasheet](https://files.pine64.org/doc/rock64/PDS-16002%20JMS578%20Datasheet%20(Rev.%201.01).pdf) + +Enclosure information: + +* [Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing](https://files.pine64.org/doc/datasheet/case/ROCK64%20Aluminum%20Waterproof%20Die%20Cast%20Casing.pdf) + +Remote control button mapping: + +* [Official Remote Control for the PINE A64 Button Mapping](https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg) diff --git a/content/documentation/ROCK64/Further_information/Other_resources.adoc b/content/documentation/ROCK64/Further_information/Other_resources.adoc deleted file mode 100644 index 1f2bb207..00000000 --- a/content/documentation/ROCK64/Further_information/Other_resources.adoc +++ /dev/null @@ -1,19 +0,0 @@ ---- -title: "Other resources" -draft: false -menu: - docs: - title: - parent: "ROCK64/Further_information" - identifier: "ROCK64/Further_information/Other_resources" - weight: ---- - -* https://forum.pine64.org/forumdisplay.php?fid=85[ROCK64 Forum] -* https://github.com/rock64-linux[ROCK64 Linux GitHub Repo] -* https://github.com/ayufan-rock64[ROCK64 ayufan GitHub Repo] -* https://github.com/rockchip-linux[Rockchip Linux GitHub Repo] -* https://github.com/JamesLinEngineer/RKMC[Rockchip Android RKMC (Forked from Kodi 16.1)] -* https://opensource.rock-chips.com/[Rockchip Open Source Wiki] -* https://www.armbian.com/rock64[Armbian's ROCK64 Page] - diff --git a/content/documentation/ROCK64/Further_information/Other_resources.md b/content/documentation/ROCK64/Further_information/Other_resources.md new file mode 100644 index 00000000..d625bbba --- /dev/null +++ b/content/documentation/ROCK64/Further_information/Other_resources.md @@ -0,0 +1,18 @@ +--- +title: "Other resources" +draft: false +menu: + docs: + title: + parent: "ROCK64/Further_information" + identifier: "ROCK64/Further_information/Other_resources" + weight: +--- + +* [ROCK64 Forum](https://forum.pine64.org/forumdisplay.php?fid=85) +* [ROCK64 Linux GitHub Repo](https://github.com/rock64-linux) +* [ROCK64 ayufan GitHub Repo](https://github.com/ayufan-rock64) +* [Rockchip Linux GitHub Repo](https://github.com/rockchip-linux) +* [Rockchip Android RKMC (Forked from Kodi 16.1)](https://github.com/JamesLinEngineer/RKMC) +* [Rockchip Open Source Wiki](https://opensource.rock-chips.com/) +* [Armbian’s ROCK64 Page](https://www.armbian.com/rock64) diff --git a/content/documentation/ROCK64/Further_information/Schematics.adoc b/content/documentation/ROCK64/Further_information/Schematics.adoc deleted file mode 100644 index 668f7566..00000000 --- a/content/documentation/ROCK64/Further_information/Schematics.adoc +++ /dev/null @@ -1,38 +0,0 @@ ---- -title: "Schematics" -draft: false -menu: - docs: - title: - parent: "ROCK64/Further_information" - identifier: "ROCK64/Further_information/Schematics" - weight: ---- - -Board Dimensions: 85mm x 56mm x 18.8mm, see the https://files.pine64.org/doc/rock64/rock64%20board%20dimension.pdf[ROCK64 board dimension drawing] - -Input Power: +5V @3A with 3.5mm/1.35mm Type H Barrel type DC connector (@2A will work if there is no heavy load on the USB 3.0 port) - -ROCK64 ver 3.0 SBC related info: - -* https://files.pine64.org/doc/rock64/Rock64%20Ver%203%20change%20notice.pdf[ROCK64 SBC v3.0 Change Notice] -* https://files.pine64.org/doc/rock64/ROCK64_Schematic_v3.0_20181105.pdf[ROCK64 Schematic v3.0 (Production Release)] -* https://files.pine64.org/doc/rock64/ROCK64_comp_ref_top_v3.0_20181105.pdf[ROCK64 Component Reference location v3.0 (top layer)] -* https://files.pine64.org/doc/rock64/ROCK64_comp_ref_bottom_v3.0_20181105.pdf[ROCK64 Component Reference location v3.0 (bottom layer)] -* https://files.pine64.org/doc/rock64/ROCK64_V3_Pi-2_and_Pi-P5+_Bus.pdf[ROCK64 SBC v3.0 Pi-2 and Pi-P5+ Bus GPIO Assignment] -* https://files.pine64.org/doc/rock64/R64V3%20RTC%20Batt%20connector.png[ROCK64 Rev3 SBC RTC Battery Connector polarity] - -ROCK64 ver 2.0 SBC related info: - -* https://files.pine64.org/doc/rock64/ROCK64_Schematic_v2.0_20171019.pdf[ROCK64 Schematic v2.0 (Production Release)] -* https://files.pine64.org/doc/rock64/ROCK64_Pi-2%20_and_Pi_P5+_Bus.pdf[ROCK64 SBC v2.0 Pi-2 and Pi-P5+ Bus GPIO Assignment] -* https://github.com/Leapo/Rock64-R64.GPIO[Github on ROCK64 GPIO library, thanks to Leapo] -* http://synfare.com/599N105E/hwdocs/rock64/index.html[Good documentation about ROCK64 GPIO pins article] -* https://files.pine64.org/doc/rock64/ROCK64_ES9023_Audio_100Mbps_Ethernet_Board.pdf[ROCK64 Audio DAC with 10/100Mbps Ethernet POT Board Schematic] - -ROCK64 3D autodesk drawing (from _TeaPack_): - -* https://myhub.autodesk360.com/ue2b2f72e/g/shares/SH7f1edQT22b515c761e818b9e1b31b54545?viewState=NoIgbgDAdAjCA0IAsSDMAzAnAQwCaoFoYBjAdhgICNTVcCA2S9AJgIFMJTsAOGTU3LmLYQAXSA[ROCK64 board 2D drawing @courtesy of TeaPack] -* https://myhub.autodesk360.com/ue2b2f72e/g/shares/SH7f1edQT22b515c761e6078b748ecd478e1?viewState=NoIgbgDAdAjCA0IDeAdEAXAngBwKZoC40ARXAZwEsBzAOzXjQEMyzd1C0AmAEwGYZOAI0G4AtAA4ArABZeo6eIiNRggJwxuomAHYAxoOm6YMaQDZOvNAF8QAXSA[ROCK64 board 3D drawing @courtesy of TeaPack] -* https://myhub.autodesk360.com/ue2b2f72e/g/shares/SH7f1edQT22b515c761e45a87155aecc813f?viewState=NoIgbgDAdAjCA0IDeAdEAXAngBwKZoC40ARXAZwEsBzAOzXjQEMyzd1C0BWAYwgGYYAEyEBaQQDYARoJEAWfjMmzckkQCYAHCs5LZAMxi41aAL4gAukA[ROCK64 Audio DAC with 10/100Mbps Ethernet POT board 3D drawing @courtesy of TeaPack] -* https://myhub.autodesk360.com/ue2b2f72e/g/shares/SH7f1edQT22b515c761ee09b497ae3f2f72e?viewState=NoIgbgDAdAjCA0IBmSYEMAcBmAbBgtACwBGhMRATMeQKYYYX5ICcAJhjYWjDBGgKwgAukA[ROCK64 board with Audio DAC POT board 3D drawing @courtesy of TeaPack] \ No newline at end of file diff --git a/content/documentation/ROCK64/Further_information/Schematics.md b/content/documentation/ROCK64/Further_information/Schematics.md new file mode 100644 index 00000000..5f6467ab --- /dev/null +++ b/content/documentation/ROCK64/Further_information/Schematics.md @@ -0,0 +1,38 @@ +--- +title: "Schematics" +draft: false +menu: + docs: + title: + parent: "ROCK64/Further_information" + identifier: "ROCK64/Further_information/Schematics" + weight: +--- + +Board Dimensions: 85mm x 56mm x 18.8mm, see the [ROCK64 board dimension drawing](https://files.pine64.org/doc/rock64/rock64%20board%20dimension.pdf) + +Input Power: +5V @3A with 3.5mm/1.35mm Type H Barrel type DC connector (@2A will work if there is no heavy load on the USB 3.0 port) + +ROCK64 ver 3.0 SBC related info: + +* [ROCK64 SBC v3.0 Change Notice](https://files.pine64.org/doc/rock64/Rock64%20Ver%203%20change%20notice.pdf) +* [ROCK64 Schematic v3.0 (Production Release)](https://files.pine64.org/doc/rock64/ROCK64_Schematic_v3.0_20181105.pdf) +* [ROCK64 Component Reference location v3.0 (top layer)](https://files.pine64.org/doc/rock64/ROCK64_comp_ref_top_v3.0_20181105.pdf) +* [ROCK64 Component Reference location v3.0 (bottom layer)](https://files.pine64.org/doc/rock64/ROCK64_comp_ref_bottom_v3.0_20181105.pdf) +* [ROCK64 SBC v3.0 Pi-2 and Pi-P5+ Bus GPIO Assignment](https://files.pine64.org/doc/rock64/ROCK64_V3_Pi-2_and_Pi-P5+_Bus.pdf) +* [ROCK64 Rev3 SBC RTC Battery Connector polarity](https://files.pine64.org/doc/rock64/R64V3%20RTC%20Batt%20connector.png) + +ROCK64 ver 2.0 SBC related info: + +* [ROCK64 Schematic v2.0 (Production Release)](https://files.pine64.org/doc/rock64/ROCK64_Schematic_v2.0_20171019.pdf) +* [ROCK64 SBC v2.0 Pi-2 and Pi-P5+ Bus GPIO Assignment](https://files.pine64.org/doc/rock64/ROCK64_Pi-2%20_and_Pi_P5+_Bus.pdf) +* [Github on ROCK64 GPIO library, thanks to Leapo](https://github.com/Leapo/Rock64-R64.GPIO) +* [Good documentation about ROCK64 GPIO pins article](http://synfare.com/599N105E/hwdocs/rock64/index.html) +* [ROCK64 Audio DAC with 10/100Mbps Ethernet POT Board Schematic](https://files.pine64.org/doc/rock64/ROCK64_ES9023_Audio_100Mbps_Ethernet_Board.pdf) + +ROCK64 3D autodesk drawing (from _TeaPack_): + +* [ROCK64 board 2D drawing @courtesy of TeaPack](https://myhub.autodesk360.com/ue2b2f72e/g/shares/SH7f1edQT22b515c761e818b9e1b31b54545?viewState=NoIgbgDAdAjCA0IAsSDMAzAnAQwCaoFoYBjAdhgICNTVcCA2S9AJgIFMJTsAOGTU3LmLYQAXSA) +* [ROCK64 board 3D drawing @courtesy of TeaPack](https://myhub.autodesk360.com/ue2b2f72e/g/shares/SH7f1edQT22b515c761e6078b748ecd478e1?viewState=NoIgbgDAdAjCA0IDeAdEAXAngBwKZoC40ARXAZwEsBzAOzXjQEMyzd1C0AmAEwGYZOAI0G4AtAA4ArABZeo6eIiNRggJwxuomAHYAxoOm6YMaQDZOvNAF8QAXSA) +* [ROCK64 Audio DAC with 10/100Mbps Ethernet POT board 3D drawing @courtesy of TeaPack](https://myhub.autodesk360.com/ue2b2f72e/g/shares/SH7f1edQT22b515c761e45a87155aecc813f?viewState=NoIgbgDAdAjCA0IDeAdEAXAngBwKZoC40ARXAZwEsBzAOzXjQEMyzd1C0BWAYwgGYYAEyEBaQQDYARoJEAWfjMmzckkQCYAHCs5LZAMxi41aAL4gAukA) +* [ROCK64 board with Audio DAC POT board 3D drawing @courtesy of TeaPack](https://myhub.autodesk360.com/ue2b2f72e/g/shares/SH7f1edQT22b515c761ee09b497ae3f2f72e?viewState=NoIgbgDAdAjCA0IBmSYEMAcBmAbBgtACwBGhMRATMeQKYYYX5ICcAJhjYWjDBGgKwgAukA) diff --git a/content/documentation/ROCK64/Further_information/Specifications.adoc b/content/documentation/ROCK64/Further_information/Specifications.md similarity index 67% rename from content/documentation/ROCK64/Further_information/Specifications.adoc rename to content/documentation/ROCK64/Further_information/Specifications.md index 7a0304d1..2681b968 100644 --- a/content/documentation/ROCK64/Further_information/Specifications.adoc +++ b/content/documentation/ROCK64/Further_information/Specifications.md @@ -9,11 +9,11 @@ menu: weight: --- -Based on https://www.rock-chips.com/a/en/products/RK33_Series/2017/0118/829.html[Rockchip RK3328] +Based on [Rockchip RK3328](https://www.rock-chips.com/a/en/products/RK33_Series/2017/0118/829.html) -== CPU Architecture +## CPU Architecture -* https://www.arm.com/products/processors/cortex-a/cortex-a53-processor.php[Quad-core Cortex-A53 up to 1.5GHz CPU] +* [Quad-core Cortex-A53 up to 1.5GHz CPU](https://www.arm.com/products/processors/cortex-a/cortex-a53-processor.php) * Full implementation of the ARM architecture v8-A instruction set * ARM Neon Advanced SIMD (single instruction, multiple data) support for accelerated media and signal processing computation * ARMv8 Cryptography Extensions @@ -27,32 +27,19 @@ Based on https://www.rock-chips.com/a/en/products/RK33_Series/2017/0118/829.html * PD_A53: Cortex-A53 + Neon + FPU + L1 I/D Cache of core 2/3 * One isolated voltage domain to support DVFS -=== Frequencies & Voltages +### Frequencies & Voltages -[cols="1,1"] -|=== -| Frequency | Voltage - -| 408 MHz -| 0.950 V - -| 600 MHz -| 0.950 V - -| 816 MHz -| 1.000 V - -| 1008 MHz -| 1.100 V - -| 1200 MHz -| 1.225 V - -| 1296 MHz -| 1.300 V -|=== +| | | +| --- | --- | +| Frequency | Voltage | +| 408 MHz | 0.950 V | +| 600 MHz | 0.950 V | +| 816 MHz | 1.000 V | +| 1008 MHz | 1.100 V | +| 1200 MHz | 1.225 V | +| 1296 MHz | 1.300 V | -=== Power Draw +### Power Draw These numbers for power draw have been measured through an USB power monitor (FNB38) while running the `stress` utility, whereby "cpu" stands for `stress --cpu 4` and "vm" stands for `stress --vm 4`. The former spins on the CPU, the latter stresses the memory. Real workloads are usually a mix of both. The tests were ran through ssh, with nothing besides power and ethernet plugged into the ROCK64 @@ -60,44 +47,23 @@ Please keep in mind that under real world usage, many other factors come into pl Helpful refresher on the formula for power (W) on DC: power = current × voltage, because the power factor is 1. The ROCK64 runs on 5V, so use that to calculate current if you need to. -|=== -|Frequency |Power cpu |Power vm - -| 1296 MHz -| 2.64 W -| 2.95 W - -| 1200 MHz -| 2.32 W -| 2.69 W - -| 1008 MHz -| 1.90 W -| 2.31 W - -| 816 MHz -| 1.62 W -| 2.05 W - -| 600 MHz -| 1.45 W -| 1.85 W - -| 408 MHz -| 1.33 W -| 1.72 W - -| Idle (no load) -2+| 1.10 W -|=== +| | | | +| --- | --- | --- | +| Frequency | Power cpu | Power vm | +| 1296 MHz | 2.64 W | 2.95 W | +| 1200 MHz | 2.32 W | 2.69 W | +| 1008 MHz | 1.90 W | 2.31 W | +| 816 MHz | 1.62 W | 2.05 W | +| 600 MHz | 1.45 W | 1.85 W | +| 408 MHz | 1.33 W | 1.72 W | It appears a good upper bound for a headless setup is in the neighbourhood of 3 W, or the energy contained in 0.025 bananas per hour. -== GPU Architecture +## GPU Architecture -* https://www.arm.com/products/multimedia/mali-gpu/ultra-low-power/mali-450.php[ARM Mali-450MP2 Dual-core GPU] +* [ARM Mali-450MP2 Dual-core GPU](https://www.arm.com/products/multimedia/mali-gpu/ultra-low-power/mali-450.php) * OpenGL ES 1.1 and 2.0, OpenVG1.1 -== System Memory +## System Memory -* LPDDR3 RAM Memory Variants: 1GB, 2GB and 4GB. \ No newline at end of file +* LPDDR3 RAM Memory Variants: 1GB, 2GB and 4GB. diff --git a/content/documentation/ROCK64/Troubleshooting.adoc b/content/documentation/ROCK64/Troubleshooting.md similarity index 50% rename from content/documentation/ROCK64/Troubleshooting.adoc rename to content/documentation/ROCK64/Troubleshooting.md index c3bba532..46efafc4 100644 --- a/content/documentation/ROCK64/Troubleshooting.adoc +++ b/content/documentation/ROCK64/Troubleshooting.md @@ -9,21 +9,20 @@ menu: weight: 4 --- -== HDMI output disconnects as soon as it connects +## HDMI output disconnects as soon as it connects Some older monitors seemingly can get into a weird state wherein the ROCK64 is unable to establish a proper connection with them. User:CounterPillow has seen this happen on an iiyama ProLite G2773HS connected over HDMI, and an Acer P225HQL connected over an HDMI to DVI adapter. The symptoms usually are that you see the monitor briefly turn on its backlight without displaying a picture, but then immediately either shutting off again or showing a "No Signal" message. The solution is to completely power down your ROCK64, also removing its power source. Then plug in the monitor, and start up the ROCK64 afterwards. You should now be getting a picture again. -== Power button doesn't do anything on a short press (Linux) +## Power button doesn't do anything on a short press (Linux) -Make sure the `rk805_pwrkey` module is loaded, e.g. with `lsmod | grep rk805_pwrkey`. The module auto loading of `rk805_pwrkey` was fixed in the following upstream kernels: v6.0/v5.15.66/v5.10.142/v5.4.213/v4.19.258/v4.14.293 so there should be no requirement for fixes with those kernels or newer. If it doesn't show up, do a `modprobe rk805_pwrkey` as root. To make this persistent, create a `99-rk805_pwrkey.conf` in `/etc/modules-load.d/` with the content `rk805_pwrkey` +Make sure the `rk805_pwrkey` module is loaded, e.g. with `lsmod | grep rk805_pwrkey`. The module auto loading of `rk805_pwrkey` was fixed in the following upstream kernels: v6.0/v5.15.66/v5.10.142/v5.4.213/v4.19.258/v4.14.293 so there should be no requirement for fixes with those kernels or newer. If it doesn’t show up, do a `modprobe rk805_pwrkey` as root. To make this persistent, create a `99-rk805_pwrkey.conf` in `/etc/modules-load.d/` with the content `rk805_pwrkey` -If it still doesn't work, make sure your init system is actually listening to the button press. With systemd, check `/etc/systemd/logind.conf` and make sure it's either all commented out (uses defaults) or contains something like `HandlePowerKey=poweroff`. You can change the short press action by setting `HandlePowerKey` to one of "ignore", "poweroff", "reboot", "halt", "kexec", "suspend", "hibernate", "hybrid-sleep", "suspend-then-hibernate", or "lock". +If it still doesn’t work, make sure your init system is actually listening to the button press. With systemd, check `/etc/systemd/logind.conf` and make sure it’s either all commented out (uses defaults) or contains something like `HandlePowerKey=poweroff`. You can change the short press action by setting `HandlePowerKey` to one of "ignore", "poweroff", "reboot", "halt", "kexec", "suspend", "hibernate", "hybrid-sleep", "suspend-then-hibernate", or "lock". -== Video output is glitchy during activity +## Video output is glitchy during activity -If your video output glitches out while there is memory bandwidth pressure, the likely reason is that the video output (VOP) quality-of-service (QoS) registers aren't set to high priority mode. - -User:CounterPillow submitted https://overviewer.org/~pillow/up/c5179dcb67/0001-rockchip-rk3328-Set-VOP-QoS-to-high-priority.patch[a patch] to u-boot to fix this, but someone still needs to write a kernel patch to save/restore the QoS registers from the power domain driver. +If your video output glitches out while there is memory bandwidth pressure, the likely reason is that the video output (VOP) quality-of-service (QoS) registers aren’t set to high priority mode. +User CounterPillow submitted [a patch](https://overviewer.org/~pillow/up/c5179dcb67/0001-rockchip-rk3328-Set-VOP-QoS-to-high-priority.patch) to u-boot to fix this, but someone still needs to write a kernel patch to save/restore the QoS registers from the power domain driver. diff --git a/content/documentation/ROCKPro64/Further_information/Datasheets.adoc b/content/documentation/ROCKPro64/Further_information/Datasheets.adoc deleted file mode 100644 index 12edf4fd..00000000 --- a/content/documentation/ROCKPro64/Further_information/Datasheets.adoc +++ /dev/null @@ -1,64 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "ROCKPro64/Further_information" - identifier: "ROCKPro64/Further_information/Datasheets" - weight: ---- - -Rockchip RK3399 SoC information: - -* https://www.rock-chips.com/a/en/products/RK33_Series/2016/0419/758.html[Rockchip RK3399 SoC Brief] -* http://opensource.rock-chips.com/images/d/d7/Rockchip_RK3399_Datasheet_V2.1-20200323.pdf[Rockchip RK3399 Datasheet V2.1] -* http://opensource.rock-chips.com/images/e/ee/Rockchip_RK3399TRM_V1.4_Part1-20170408.pdf[Rockchip RK3399 Technical Reference Manual part 1] -* https://files.pine64.org/doc/datasheet/rockpro64/RK808%20datasheet%20V0.8.pdf[Rockchip RK808 Datasheet V0.8] - -LPDDR4 (200 Balls) SDRAM: - -* https://files.pine64.org/doc/datasheet/rockpro64/SM512M32Z01MD2BNP(200BALL).pdf[Micron LPDDR4 Mobile LPDDR4 Datasheet] - -eMMC information: - -* https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf[PINE64 eMMC module schematic] -* https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf[PINE64 USB adapter for eMMC module V2 schematic] -* https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar[PINE64 USB adapter for eMMC module PCB in JPEG] -* https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf[16GB Foresee eMMC Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf[32GB/64GB/128GB SanDisk eMMC Datasheet] - -SPI NOR Flash information: - -* https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf[WinBond 128Mb SPI Flash Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf[GigaDevice 128Mb SPI Flash Datasheet] - -Heatsink related info: - -* https://files.pine64.org/doc/datasheet/rockpro64/Rockpro%20Passive%20Heatsink%20Spec.jpg[ROCKPro64 Passive Heatsink Dimension Drawing] -* https://files.pine64.org/doc/datasheet/rockpro64/LMS-TC150%20Silicon%20Thermal%20Pad.pdf[Heatsink Thermal Pad Specification] - -Wireless related info: - -* AMPAK AP6256 11AC WiFi + Bluetooth5.0 Datasheet https://files.pine64.org/doc/datasheet/rockpro64/AP6256%20datasheet_V1.3_12202017.pdf[(v. 1.3)] http://files.pine64.org/doc/datasheet/PinebookPro/AP6256%20datasheet_V1.7_12282018.pdf[(v. 1.7)] - -Ethernet related info: - -* https://files.pine64.org/doc/datasheet/rock64/RTL8211F-CG-Realtek.pdf[Realtek RTL8211F 10/100/1000M Ethernet Transceiver Datasheet] - -Peripheral related info: - -* https://files.pine64.org/doc/datasheet/rockpro64/ASM1061_Data%20Sheet_R1_8.pdf[asmedia ASM1061 PCIe SATA 2.0 Datasheet] - -Remote control button mapping: - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg[Official Remote Control for the PINE64 Button Mapping] - -Audio Codec (ES8316) (under board): - -* http://everest-semi.com/pdf/ES8316%20PB.pdf[Everest ES8316 Audio Codec] - -PWM controlled fan, SPDIF, and RTC Battery Backup headers: - -* https://www.jst-mfg.com/product/pdf/eng/ePH.pdf[JST-PH connector] - diff --git a/content/documentation/ROCKPro64/Further_information/Datasheets.md b/content/documentation/ROCKPro64/Further_information/Datasheets.md new file mode 100644 index 00000000..1642eaea --- /dev/null +++ b/content/documentation/ROCKPro64/Further_information/Datasheets.md @@ -0,0 +1,63 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "ROCKPro64/Further_information" + identifier: "ROCKPro64/Further_information/Datasheets" + weight: +--- + +Rockchip RK3399 SoC information: + +* [Rockchip RK3399 SoC Brief](https://www.rock-chips.com/a/en/products/RK33_Series/2016/0419/758.html) +* [Rockchip RK3399 Datasheet V2.1](http://opensource.rock-chips.com/images/d/d7/Rockchip_RK3399_Datasheet_V2.1-20200323.pdf) +* [Rockchip RK3399 Technical Reference Manual part 1](http://opensource.rock-chips.com/images/e/ee/Rockchip_RK3399TRM_V1.4_Part1-20170408.pdf) +* [Rockchip RK808 Datasheet V0.8](https://files.pine64.org/doc/datasheet/rockpro64/RK808%20datasheet%20V0.8.pdf) + +LPDDR4 (200 Balls) SDRAM: + +* [Micron LPDDR4 Mobile LPDDR4 Datasheet](https://files.pine64.org/doc/datasheet/rockpro64/SM512M32Z01MD2BNP(200BALL).pdf) + +eMMC information: + +* [PINE64 eMMC module schematic](https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf) +* [PINE64 USB adapter for eMMC module V2 schematic](https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf) +* [PINE64 USB adapter for eMMC module PCB in JPEG](https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar) +* [16GB Foresee eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf) +* [32GB/64GB/128GB SanDisk eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf) + +SPI NOR Flash information: + +* [WinBond 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf) +* [GigaDevice 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf) + +Heatsink related info: + +* [ROCKPro64 Passive Heatsink Dimension Drawing](https://files.pine64.org/doc/datasheet/rockpro64/Rockpro%20Passive%20Heatsink%20Spec.jpg) +* [Heatsink Thermal Pad Specification](https://files.pine64.org/doc/datasheet/rockpro64/LMS-TC150%20Silicon%20Thermal%20Pad.pdf) + +Wireless related info: + +* AMPAK AP6256 11AC WiFi + Bluetooth5.0 Datasheet [(v. 1.3)](https://files.pine64.org/doc/datasheet/rockpro64/AP6256%20datasheet_V1.3_12202017.pdf) [(v. 1.7)](http://files.pine64.org/doc/datasheet/PinebookPro/AP6256%20datasheet_V1.7_12282018.pdf) + +Ethernet related info: + +* [Realtek RTL8211F 10/100/1000M Ethernet Transceiver Datasheet](https://files.pine64.org/doc/datasheet/rock64/RTL8211F-CG-Realtek.pdf) + +Peripheral related info: + +* [asmedia ASM1061 PCIe SATA 2.0 Datasheet](https://files.pine64.org/doc/datasheet/rockpro64/ASM1061_Data%20Sheet_R1_8.pdf) + +Remote control button mapping: + +* [Official Remote Control for the PINE64 Button Mapping](https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg) + +Audio Codec (ES8316) (under board): + +* [Everest ES8316 Audio Codec](http://everest-semi.com/pdf/ES8316%20PB.pdf) + +PWM controlled fan, SPDIF, and RTC Battery Backup headers: + +* [JST-PH connector](https://www.jst-mfg.com/product/pdf/eng/ePH.pdf) diff --git a/content/documentation/ROCKPro64/Further_information/Other_resources.adoc b/content/documentation/ROCKPro64/Further_information/Other_resources.adoc deleted file mode 100644 index 86cbc3b3..00000000 --- a/content/documentation/ROCKPro64/Further_information/Other_resources.adoc +++ /dev/null @@ -1,23 +0,0 @@ ---- -title: "Other resources" -draft: false -menu: - docs: - title: - parent: "ROCKPro64/Further_information" - identifier: "ROCKPro64/Further_information/Other_resources" - weight: ---- - -* https://forum.pine64.org/forumdisplay.php?fid=98[ROCKPro64 Forum] -* https://pine64.com/?post_type=product[PINE64 shop] -* https://github.com/rockchip-linux[Rockchip Linux GitHub Repo] -* http://opensource.rock-chips.com/[Rockchip Open Source Wiki] -* ExplainingComputers have a video review https://www.youtube.com/watch?v=CeoNHGFN_30[of the RockPro64 here, including linux first boot.] - -== Useful articles and blog posts - -If you want to dive in to the ecosystem, here's a short list of various articles and blog posts that can help you set up your soft- or hardware development environment. - -* https://stikonas.eu/wordpress/2019/09/15/blobless-boot-with-rockpro64/[Blobless boot with RockPro64 by Andrius Štikonas] -* https://marcin.juszkiewicz.com.pl/2020/06/17/ebbr-on-rockpro64/[EBBR on RockPro64 by Marcin Juszkiewicz] \ No newline at end of file diff --git a/content/documentation/ROCKPro64/Further_information/Other_resources.md b/content/documentation/ROCKPro64/Further_information/Other_resources.md new file mode 100644 index 00000000..5e6f5343 --- /dev/null +++ b/content/documentation/ROCKPro64/Further_information/Other_resources.md @@ -0,0 +1,23 @@ +--- +title: "Other resources" +draft: false +menu: + docs: + title: + parent: "ROCKPro64/Further_information" + identifier: "ROCKPro64/Further_information/Other_resources" + weight: +--- + +* [ROCKPro64 Forum](https://forum.pine64.org/forumdisplay.php?fid=98) +* [PINE64 shop](https://pine64.com/?post_type=product) +* [Rockchip Linux GitHub Repo](https://github.com/rockchip-linux) +* [Rockchip Open Source Wiki](http://opensource.rock-chips.com/) +* ExplainingComputers have a video review [of the RockPro64 here, including linux first boot.](https://www.youtube.com/watch?v=CeoNHGFN_30) + +## Useful articles and blog posts + +If you want to dive in to the ecosystem, here’s a short list of various articles and blog posts that can help you set up your soft- or hardware development environment. + +* [Blobless boot with RockPro64 by Andrius Štikonas](https://stikonas.eu/wordpress/2019/09/15/blobless-boot-with-rockpro64/) +* [EBBR on RockPro64 by Marcin Juszkiewicz](https://marcin.juszkiewicz.com.pl/2020/06/17/ebbr-on-rockpro64/) diff --git a/content/documentation/ROCKPro64/Further_information/Schematics_and_certifications.adoc b/content/documentation/ROCKPro64/Further_information/Schematics_and_certifications.adoc deleted file mode 100644 index 440640d6..00000000 --- a/content/documentation/ROCKPro64/Further_information/Schematics_and_certifications.adoc +++ /dev/null @@ -1,32 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "ROCKPro64/Further_information" - identifier: "ROCKPro64/Further_information/Schematics_and_certifications" - weight: ---- - -* Board dimensions: 133 mm x 80 mm x 19 mm -* Power input: 12 V, 3 A or 5 A, using 5.5 mm (OD) / 2.1 mm (ID) type M barrel DC connector -* https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf[ROCKPro64 Schematic v2.1 (Second Batch Production Release)] -** https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.dxf[ROCKPro64 v2.1 Board Top Outline in AutoCad DXF format] -** https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-bottom.dxf[ROCKPro64 v2.1 Board Bottom Outline in AutoCad DXF format] -** https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.pdf[ROCKPro64 v2.1 Board Top Outline in PDF format] -** https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-bottom.pdf[ROCKPro64 v2.1 Board Bottom Outline in PDF format] -* https://files.pine64.org/doc/rockpro64/rockpro64_v20-SCH.pdf[ROCKPro64 Schematic v2.0 (Pilot Production Release)] -** http://files.pine64.org/doc/rockpro64/Rockpro64-ver2.0-topsilk_ref.pdf[ROCKPro64 v2.0 Board Top Silkscreen in PDF format] (contains component labels) -** https://files.pine64.org/doc/rockpro64/ROCKPRo64%20Engineering%20Change%20Notice%2020180628RP01.pdf[Engineering Change Notice for v2.0 to turn on 3.3V power on PCIe] -* https://files.pine64.org/doc/rockpro64/rockpro64_wifi_ap6359SA.pdf[ROCKPro64 AP6359SA Wifi/BT Schematic] -* https://files.pine64.org/doc/rockpro64/Rockpro64%20Pi-2%20Connector%20ver0.2.png[ROCKPro64 Pi-2 Pin assignment and definition] -* https://files.pine64.org/doc/rockpro64/RockPro-3D-model.zip[ROCKPro64 3D model] - -Certifications: - -* Disclaimer: Please note that PINE64 SBC is not a "final" product and in general certification is not necessary. However, PINE64 still submit the SBC for FCC, CE, and ROHS certification and obtain the certificates to proof that SBC board is capable on passing the testing. Please note a final commercial product needs to performs its owns testing and obtains its owns certificates. -* https://files.pine64.org/doc/cert/ROCKPro64%20FCC%20SDOC%20Certificate.pdf[ROCKPro64 FCC Certificate] -* https://files.pine64.org/doc/cert/ROCKPro64%20CE-EMC%20Certificate.pdf[ROCKPro64 CE Certificate] -* https://files.pine64.org/doc/cert/ROCKPro64%20ROHS%20%20SEC180529404001E%20Report.pdf[ROCKPro64 RoHS Report] - diff --git a/content/documentation/ROCKPro64/Further_information/Schematics_and_certifications.md b/content/documentation/ROCKPro64/Further_information/Schematics_and_certifications.md new file mode 100644 index 00000000..e3b631f5 --- /dev/null +++ b/content/documentation/ROCKPro64/Further_information/Schematics_and_certifications.md @@ -0,0 +1,31 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "ROCKPro64/Further_information" + identifier: "ROCKPro64/Further_information/Schematics_and_certifications" + weight: +--- + +* Board dimensions: 133 mm x 80 mm x 19 mm +* Power input: 12 V, 3 A or 5 A, using 5.5 mm (OD) / 2.1 mm (ID) type M barrel DC connector +* [ROCKPro64 Schematic v2.1 (Second Batch Production Release)](https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf) + * [ROCKPro64 v2.1 Board Top Outline in AutoCad DXF format](https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.dxf) + * [ROCKPro64 v2.1 Board Bottom Outline in AutoCad DXF format](https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-bottom.dxf) + * [ROCKPro64 v2.1 Board Top Outline in PDF format](https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.pdf) + * [ROCKPro64 v2.1 Board Bottom Outline in PDF format](https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-bottom.pdf) +* [ROCKPro64 Schematic v2.0 (Pilot Production Release)](https://files.pine64.org/doc/rockpro64/rockpro64_v20-SCH.pdf) + * [ROCKPro64 v2.0 Board Top Silkscreen in PDF format](http://files.pine64.org/doc/rockpro64/Rockpro64-ver2.0-topsilk_ref.pdf) (contains component labels) + * [Engineering Change Notice for v2.0 to turn on 3.3V power on PCIe](https://files.pine64.org/doc/rockpro64/ROCKPRo64%20Engineering%20Change%20Notice%2020180628RP01.pdf) +* [ROCKPro64 AP6359SA Wifi/BT Schematic](https://files.pine64.org/doc/rockpro64/rockpro64_wifi_ap6359SA.pdf) +* [ROCKPro64 Pi-2 Pin assignment and definition](https://files.pine64.org/doc/rockpro64/Rockpro64%20Pi-2%20Connector%20ver0.2.png) +* [ROCKPro64 3D model](https://files.pine64.org/doc/rockpro64/RockPro-3D-model.zip) + +Certifications: + +* Disclaimer: Please note that PINE64 SBC is not a "final" product and in general certification is not necessary. However, PINE64 still submit the SBC for FCC, CE, and ROHS certification and obtain the certificates to proof that SBC board is capable on passing the testing. Please note a final commercial product needs to performs its owns testing and obtains its owns certificates. +* [ROCKPro64 FCC Certificate](https://files.pine64.org/doc/cert/ROCKPro64%20FCC%20SDOC%20Certificate.pdf) +* [ROCKPro64 CE Certificate](https://files.pine64.org/doc/cert/ROCKPro64%20CE-EMC%20Certificate.pdf) +* [ROCKPro64 RoHS Report](https://files.pine64.org/doc/cert/ROCKPro64%20ROHS%20%20SEC180529404001E%20Report.pdf) diff --git a/content/documentation/RockBox/Specifications.adoc b/content/documentation/RockBox/Specifications.adoc deleted file mode 100644 index cbe654e3..00000000 --- a/content/documentation/RockBox/Specifications.adoc +++ /dev/null @@ -1,23 +0,0 @@ ---- -title: "Specifications" -draft: false -menu: - docs: - title: - parent: "RockBox" - identifier: "RockBox/Specifications" - weight: 1 ---- - -* *Dimensions*: 106mm x 106mm x 16.9mm -* *Weight*: 143 g -* *CPU*: Rockchip RK3328, Quad core Cortex-A53 @ up to 1.5GHz -* *GPU*: Mali-450MP2 -* *System Memory*: 1GB LPDDR3 -* *Internal Storage*: 8GB eMMC -* *Connectivity*: 802.11a/b/g/n, Ethernet 10/100 -* *USB*: 1x USB 2.0 OTG port, 1x USB 3.0 port -* *Video Output*: HDMI Standard HDMI 2.0a@60hz -* *Audio Output*: Via HDMI, Optical S/PDIF port -* *Power Supply*: DC 5V/2A - diff --git a/content/documentation/RockBox/Specifications.md b/content/documentation/RockBox/Specifications.md new file mode 100644 index 00000000..fb9ad25c --- /dev/null +++ b/content/documentation/RockBox/Specifications.md @@ -0,0 +1,22 @@ +--- +title: "Specifications" +draft: false +menu: + docs: + title: + parent: "RockBox" + identifier: "RockBox/Specifications" + weight: 1 +--- + +* **Dimensions**: 106mm x 106mm x 16.9mm +* **Weight**: 143 g +* **CPU**: Rockchip RK3328, Quad core Cortex-A53 @ up to 1.5GHz +* **GPU**: Mali-450MP2 +* **System Memory**: 1GB LPDDR3 +* **Internal Storage**: 8GB eMMC +* **Connectivity**: 802.11a/b/g/n, Ethernet 10/100 +* **USB**: 1x USB 2.0 OTG port, 1x USB 3.0 port +* **Video Output**: HDMI Standard HDMI 2.0a@60hz +* **Audio Output**: Via HDMI, Optical S/PDIF port +* **Power Supply**: DC 5V/2A diff --git a/content/documentation/SOEDGE/Further_information/Datasheets.adoc b/content/documentation/SOEDGE/Further_information/Datasheets.adoc deleted file mode 100644 index 37283fe4..00000000 --- a/content/documentation/SOEDGE/Further_information/Datasheets.adoc +++ /dev/null @@ -1,56 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "SOEDGE/Further_information" - identifier: "SOEDGE/Further_information/Datasheets" - weight: ---- - -Rockchip RK1808 SoC information: - -* http://opensource.rock-chips.com/images/4/43/Rockchip_RK1808_Datasheet_V1.2_20190527.pdf[Rockchip RK1808 ver 1.2 datasheet] -* https://files.pine64.org/doc/datasheet/SOEdge/Rockchip%20RK1808%20TRM%20Part1%20V1.2--20190826%20open%20source.pdf[Rockchip TK1808 Technical Reference Manual Part 1] - -Rockchip RK809 PMU (Power Management Unit) information: - -* https://rockchip.fr/RK809%20datasheet%20V1.01.pdf[Rockchip RK809 PMIC Datasheet] - -DDR4 information: - -* https://files.pine64.org/doc/datasheet/SOEdge/Micron%208Gb_DDR4_SDRAM.pdf[Micron DDR4 Datasheet] - -eMMC information: - -* https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf[PINE64 eMMC module schematic] -* https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf[PINE64 USB adapter for eMMC module V2 schematic] -* https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar[PINE64 USB adapter for eMMC module PCB in JPEG] -* https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf[16GB Foresee eMMC Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf[32GB/64GB/128GB SanDisk eMMC Datasheet] - -SPI NOR Flash information: - -* https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf[WinBond 128Mb SPI Flash Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf[GigaDevice 128Mb SPI Flash Datasheet] - -SOEDGE Related: - -* LCD Touch Screen Panel information: -** https://files.pine64.org/doc/datasheet/pine64/FY07024DI26A30-D_feiyang_LCD_panel.pdf[7.0" 1200x600 TFT-LCD Panel Specification] -** https://files.pine64.org/doc/datasheet/pine64/HK70DR2459-PG-V01.pdf[Touch Panel Specification] -** https://files.pine64.org/doc/datasheet/pine64/GT911%20Capacitive%20Touch%20Controller%20Datasheet.pdf[GOODiX GT911 5-Point Capacitive Touch Controller Datasheet] -* Ethernet PHY information: -** https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf[Realtek RTL8211 10/100/1000M Ethernet Transceiver for SOEDGE model A baseboard] -* Wifi/BT module information: -** https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf[SOEDGE/SOPINE/PINE A64 Wifi/BT Module Schematic] -** https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf[Realtek RTL8723BS WiFi with BT SDIO] -* Enclosure information: -** https://files.pine64.org/doc/datasheet/case/playbox_enclosure_20160426.stp[Playbox Enclosure 3D file] -** https://files.pine64.org/doc/datasheet/case/ABS_enclosure_20160426.stp[ABS Enclosure 3D file] -** https://files.pine64.org/doc/datasheet/case/pine64%20Die%20Cast%20casing-final.jpg[Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing] -* Connector information: -** https://files.pine64.org/doc/datasheet/pine64/ePH.pdf[2.0mm PH Type connector specification use in Lithium Battery (VBAT) port and RTC Battery port] -** https://files.pine64.org/doc/datasheet/pine64/0.5FPC%20Front%20Open%20Connector%20H=1.5.pdf[0.5mm Pitch cover type FPC connector specification use in DSI port, TP port and CSI port] - diff --git a/content/documentation/SOEDGE/Further_information/Datasheets.md b/content/documentation/SOEDGE/Further_information/Datasheets.md new file mode 100644 index 00000000..b8266dfd --- /dev/null +++ b/content/documentation/SOEDGE/Further_information/Datasheets.md @@ -0,0 +1,55 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "SOEDGE/Further_information" + identifier: "SOEDGE/Further_information/Datasheets" + weight: +--- + +Rockchip RK1808 SoC information: + +* [Rockchip RK1808 ver 1.2 datasheet](http://opensource.rock-chips.com/images/4/43/Rockchip_RK1808_Datasheet_V1.2_20190527.pdf) +* [Rockchip TK1808 Technical Reference Manual Part 1](https://files.pine64.org/doc/datasheet/SOEdge/Rockchip%20RK1808%20TRM%20Part1%20V1.2--20190826%20open%20source.pdf) + +Rockchip RK809 PMU (Power Management Unit) information: + +* [Rockchip RK809 PMIC Datasheet](https://rockchip.fr/RK809%20datasheet%20V1.01.pdf) + +DDR4 information: + +* [Micron DDR4 Datasheet](https://files.pine64.org/doc/datasheet/SOEdge/Micron%208Gb_DDR4_SDRAM.pdf) + +eMMC information: + +* [PINE64 eMMC module schematic](https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf) +* [PINE64 USB adapter for eMMC module V2 schematic](https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf) +* [PINE64 USB adapter for eMMC module PCB in JPEG](https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar) +* [16GB Foresee eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf) +* [32GB/64GB/128GB SanDisk eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf) + +SPI NOR Flash information: + +* [WinBond 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf) +* [GigaDevice 128Mb SPI Flash Datasheet](https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf) + +SOEDGE Related: + +* LCD Touch Screen Panel information: + * [7.0" 1200x600 TFT-LCD Panel Specification](https://files.pine64.org/doc/datasheet/pine64/FY07024DI26A30-D_feiyang_LCD_panel.pdf) + * [Touch Panel Specification](https://files.pine64.org/doc/datasheet/pine64/HK70DR2459-PG-V01.pdf) + * [GOODiX GT911 5-Point Capacitive Touch Controller Datasheet](https://files.pine64.org/doc/datasheet/pine64/GT911%20Capacitive%20Touch%20Controller%20Datasheet.pdf) +* Ethernet PHY information: + * [Realtek RTL8211 10/100/1000M Ethernet Transceiver for SOEDGE model A baseboard](https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf) +* Wifi/BT module information: + * [SOEDGE/SOPINE/PINE A64 Wifi/BT Module Schematic](https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf) + * [Realtek RTL8723BS WiFi with BT SDIO](https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf) +* Enclosure information: + * [Playbox Enclosure 3D file](https://files.pine64.org/doc/datasheet/case/playbox_enclosure_20160426.stp) + * [ABS Enclosure 3D file](https://files.pine64.org/doc/datasheet/case/ABS_enclosure_20160426.stp) + * [Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing](https://files.pine64.org/doc/datasheet/case/pine64%20Die%20Cast%20casing-final.jpg) +* Connector information: + * [2.0mm PH Type connector specification use in Lithium Battery (VBAT) port and RTC Battery port](https://files.pine64.org/doc/datasheet/pine64/ePH.pdf) + * [0.5mm Pitch cover type FPC connector specification use in DSI port, TP port and CSI port](https://files.pine64.org/doc/datasheet/pine64/0.5FPC%20Front%20Open%20Connector%20H=1.5.pdf) diff --git a/content/documentation/SOEDGE/Further_information/Schematics_and_certifications.adoc b/content/documentation/SOEDGE/Further_information/Schematics_and_certifications.adoc deleted file mode 100644 index 529493b5..00000000 --- a/content/documentation/SOEDGE/Further_information/Schematics_and_certifications.adoc +++ /dev/null @@ -1,34 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "SOEDGE/Further_information" - identifier: "SOEDGE/Further_information/Schematics_and_certifications" - weight: ---- - -SOEDGE module schematics: - -* https://files.pine64.org/doc/SOEdge/SOEdge-Schematic-v2.0-190919.pdf[SOEDGE Module ver 2.0 20190919 Schematic] -* https://files.pine64.org/doc/SOEdge/SoEdge-PCB-placement-v2.0-topplace.pdf[SOEDGE Module ver 2.0 20190919 PCB Component Placement Top PDF file] -* https://files.pine64.org/doc/SOEdge/SoEdge-PCB-placement-v2.0-bottomplace.pdf[SOEDGE Module ver 2.0 20190919 PCB Component Placement Bottom PDF file] -* https://files.pine64.org/doc/SOEdge/SoEdge-PCB-placement-v2.0-topplace.dxf[SOEDGE Module ver 2.0 20190919 PCB Component Placement Top Drawing file] -* https://files.pine64.org/doc/SOEdge/SoEdge-PCB-placement-v2.0-bottomplace.dxf[SOEDGE Module ver 2.0 20190919 PCB Component Placement Bottom Drawing file] -* https://files.pine64.org/doc/SOEdge/SOEdge%20Pin%20Assignments%20ver%201.00.xlsx[SOEDGE Module Pin Assignment ver 1.0 in Excel format(includes comparison chart to SOPine)] -* https://files.pine64.org/doc/SOEdge/SOEdge%20Pin%20Assignments%20ver%201.00.ods[SOEDGE Module Pin Assignment ver 1.0 in Open Document format(includes comparison chart to SOPine)] - -SOEDGE Neural AI Stick schematic: - -* https://files.pine64.org/doc/SOEdge/SOEdge%20Neural%20AI%20Stick%20Schematic_V10.pdf[SOEDGE Neural AI Stick PDF file] - -SOEDGE/SOPINE/PINE A64 WiFi/BT module schematics: - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf[PINE A64 Wifi/BT Module Schematic] - -SOEDGE module together with the baseboard certification: - -* Disclaimer: Please note that SOEDGE module is not a "final" product and in general certification is not necessary. However, SOEDGE module still submits the mpdel A baseboard for FCC, CE, and ROHS certifications and obtain the certificates to prove that can pass the testing. Please note, a final commercial product needs to perform its own testing and obtain its own certificate. -* Not yet available - diff --git a/content/documentation/SOEDGE/Further_information/Schematics_and_certifications.md b/content/documentation/SOEDGE/Further_information/Schematics_and_certifications.md new file mode 100644 index 00000000..c4c92a26 --- /dev/null +++ b/content/documentation/SOEDGE/Further_information/Schematics_and_certifications.md @@ -0,0 +1,33 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "SOEDGE/Further_information" + identifier: "SOEDGE/Further_information/Schematics_and_certifications" + weight: +--- + +SOEDGE module schematics: + +* [SOEDGE Module ver 2.0 20190919 Schematic](https://files.pine64.org/doc/SOEdge/SOEdge-Schematic-v2.0-190919.pdf) +* [SOEDGE Module ver 2.0 20190919 PCB Component Placement Top PDF file](https://files.pine64.org/doc/SOEdge/SoEdge-PCB-placement-v2.0-topplace.pdf) +* [SOEDGE Module ver 2.0 20190919 PCB Component Placement Bottom PDF file](https://files.pine64.org/doc/SOEdge/SoEdge-PCB-placement-v2.0-bottomplace.pdf) +* [SOEDGE Module ver 2.0 20190919 PCB Component Placement Top Drawing file](https://files.pine64.org/doc/SOEdge/SoEdge-PCB-placement-v2.0-topplace.dxf) +* [SOEDGE Module ver 2.0 20190919 PCB Component Placement Bottom Drawing file](https://files.pine64.org/doc/SOEdge/SoEdge-PCB-placement-v2.0-bottomplace.dxf) +* [SOEDGE Module Pin Assignment ver 1.0 in Excel format(includes comparison chart to SOPine)](https://files.pine64.org/doc/SOEdge/SOEdge%20Pin%20Assignments%20ver%201.00.xlsx) +* [SOEDGE Module Pin Assignment ver 1.0 in Open Document format(includes comparison chart to SOPine)](https://files.pine64.org/doc/SOEdge/SOEdge%20Pin%20Assignments%20ver%201.00.ods) + +SOEDGE Neural AI Stick schematic: + +* [SOEDGE Neural AI Stick PDF file](https://files.pine64.org/doc/SOEdge/SOEdge%20Neural%20AI%20Stick%20Schematic_V10.pdf) + +SOEDGE/SOPINE/PINE A64 WiFi/BT module schematics: + +* [PINE A64 Wifi/BT Module Schematic](https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf) + +SOEDGE module together with the baseboard certification: + +* Disclaimer: Please note that SOEDGE module is not a "final" product and in general certification is not necessary. However, SOEDGE module still submits the mpdel A baseboard for FCC, CE, and ROHS certifications and obtain the certificates to prove that can pass the testing. Please note, a final commercial product needs to perform its own testing and obtain its own certificate. +* Not yet available diff --git a/content/documentation/SOEDGE_Baseboard/Schematics_and_certifications.adoc b/content/documentation/SOEDGE_Baseboard/Schematics_and_certifications.md similarity index 57% rename from content/documentation/SOEDGE_Baseboard/Schematics_and_certifications.adoc rename to content/documentation/SOEDGE_Baseboard/Schematics_and_certifications.md index 6bb125e7..ba518fd0 100644 --- a/content/documentation/SOEDGE_Baseboard/Schematics_and_certifications.adoc +++ b/content/documentation/SOEDGE_Baseboard/Schematics_and_certifications.md @@ -14,9 +14,9 @@ menu: SOEDGE Model "A" Baseboard schematics and PCB board resources: -* https://files.pine64.org/doc/SOEdge/SOEDGE_MODEL_A_BASEBOARD_Schematic-20210223.pdf[SOEDGE Model "A" Baseboard Schematic 20210223 PDF file] -* https://files.pine64.org/doc/SOEdge/SOEDGE_MODEL_A_BASEBOARD_PCB-TOP-20210223.pdf[SOEDGE Model "A" Baseboard 20210223 PCB Component Placement Top PDF file] -* https://files.pine64.org/doc/SOEdge/SOEDGE_MODEL_A_BASEBOARD_PCB-BOT-20210223.pdf[SOEDGE Model "A" Baseboard 20210223 PCB Component Placement Bottom PDF file] +* [SOEDGE Model "A" Baseboard Schematic 20210223 PDF file](https://files.pine64.org/doc/SOEdge/SOEDGE_MODEL_A_BASEBOARD_Schematic-20210223.pdf) +* [SOEDGE Model "A" Baseboard 20210223 PCB Component Placement Top PDF file](https://files.pine64.org/doc/SOEdge/SOEDGE_MODEL_A_BASEBOARD_PCB-TOP-20210223.pdf) +* [SOEDGE Model "A" Baseboard 20210223 PCB Component Placement Bottom PDF file](https://files.pine64.org/doc/SOEdge/SOEDGE_MODEL_A_BASEBOARD_PCB-BOT-20210223.pdf) SOEDGE module together with the baseboard certification: @@ -25,4 +25,4 @@ SOEDGE module together with the baseboard certification: Ethernet PHY information: -* https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf[Realtek RTL8211 10/100/1000M Ethernet Transceiver for SOEDGE model A baseboard] +* [Realtek RTL8211 10/100/1000M Ethernet Transceiver for SOEDGE model A baseboard](https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf) diff --git a/content/documentation/SOEDGE_Baseboard/Specifications.adoc b/content/documentation/SOEDGE_Baseboard/Specifications.md similarity index 99% rename from content/documentation/SOEDGE_Baseboard/Specifications.adoc rename to content/documentation/SOEDGE_Baseboard/Specifications.md index 9405eae9..ffe29a56 100644 --- a/content/documentation/SOEDGE_Baseboard/Specifications.adoc +++ b/content/documentation/SOEDGE_Baseboard/Specifications.md @@ -25,4 +25,3 @@ menu: * Optional AC WiFi + BT 5.0 module expansion module * Headphone Jack * 5.5″ Barrel Power (12V 3A/5A) Port - diff --git a/content/documentation/SOPINE/Further_information/Schematics_and_certifications.adoc b/content/documentation/SOPINE/Further_information/Schematics_and_certifications.adoc deleted file mode 100644 index cf4ebe45..00000000 --- a/content/documentation/SOPINE/Further_information/Schematics_and_certifications.adoc +++ /dev/null @@ -1,81 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "SOPINE/Further_information" - identifier: "SOPINE/Further_information/Schematics_and_certifications" - weight: 2 ---- - -SOPINE module schematic: - -* https://files.pine64.org/doc/SOPINE-A64/SOPINE-A64-Schematic-ver-0.9.pdf[SOPINE Module Schematic] - -SOPINE pin assignments: - -* https://files.pine64.org/doc/SOPINE-A64/SOPINE-A64-Pin-Assignments-ver-1.0.pdf[SOPINE Module Pin Assignment ver 1.0] - -PINE A64-LTS / SOPINE WiFi/BT module schematic: - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf[PINE A64 WiFi/BT Module Schematic] - -PINE A64-LTS / SOPINE Stereo Audio DAC board schematic: - -* https://forum.pine64.org/attachment.php?aid=697[PINE A64-LTS / SOPINE Stereo Audio DAC Board Schematic] - -SOPINE (together with model "A" baseboard) certification: - -* https://files.pine64.org/doc/cert/SOPine%20FCC%20certification%20VOC20170428.pdf[SOPINE with model "A" baseboard FCC Certificate] -* https://files.pine64.org/doc/cert/SOPine%20CE%20certification%20VOC20170428.pdf[SOPINE with model "A" baseboard CE Certificate] -* https://files.pine64.org/doc/cert/SOPine%20ROHS%20certification%20VOC20170322.pdf[SOPINE with model "A" baseboard RoHS Certificate] - -== PINE A64, PINE A64+, PINE A64-LTS and SOPINE related - -Five megapixel CMOS camera module information: - -* https://files.pine64.org/doc/datasheet/pine64/YL-PINE64-4EC.pdf[PINE64 YL-PINE64-4EC 5M Pixel CMOS Image Sensor Module (Description in Chinese)] -* https://files.pine64.org/doc/datasheet/pine64/S5K4EC%205M%208%205X8%205%20PLCC%20%20Data%20Sheet_V1.0.pdf[S5K4EC 5MP CMOS Image Sensor SoC Module Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/S5K4ECGX_EVT1_DataSheet_R005_20100816.pdf[S5K4EC 5MP CMOS Image Sensor SoC Chip Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/s5k4ec.c[S5K4EC 5MP CMOS Image Sensor Driver Source Code in C language] - -Early version Camera module information: - -* https://files.pine64.org/doc/datasheet/pine64/D116-A64_Bonsen_cmos_camera.pdf[Bonsen Kexin V118-A64-GC2145-HM5065 CMOS Image Sensor Module] -* https://files.pine64.org/doc/datasheet/pine64/HM5065-DS-V03.pdf[HiMax 5MP CMOS Image Sensor SoC] - -LCD Touch Screen Panel information: - -* https://files.pine64.org/doc/datasheet/pine64/FY07024DI26A30-D_feiyang_LCD_panel.pdf[7.0" 1200x600 TFT-LCD Panel Specification] -* https://files.pine64.org/doc/datasheet/pine64/HK70DR2459-PG-V01.pdf[Touch Panel Specification] -* https://files.pine64.org/doc/datasheet/pine64/GT911%20Capacitive%20Touch%20Controller%20Datasheet.pdf[GOODiX GT911 5-Point Capacitive Touch Controller Datasheet] - -Lithium battery information: - -* https://files.pine64.org/doc/datasheet/pine64/9070120P%203.7V%208000MAH.pdf[8000mAH Lithium Battery Specification] - -Ethernet PHY information: - -* https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf[Realtek RTL8211 10/100/1000M Ethernet Transceiver for PINE A64-LTS Board and SOPINE Baseboard] - -WiFi/BT module information: - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf[PINE A64 Wifi/BT Module Schematic] -* https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf[Realtek RTL8723BS WiFi with BT SDIO] - -Enclosure information: - -* https://files.pine64.org/doc/datasheet/case/playbox_enclosure_20160426.stp[Playbox Enclosure 3D file] -* https://files.pine64.org/doc/datasheet/case/ABS_enclosure_20160426.stp[ABS Enclosure 3D file] -* https://files.pine64.org/doc/datasheet/case/pine64%20Die%20Cast%20casing-final.jpg[Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing] - -Connector information: - -* https://files.pine64.org/doc/datasheet/pine64/ePH.pdf[2.0mm PH Type connector specification use in Lithium Battery (VBAT) port and RTC Battery port] -* https://files.pine64.org/doc/datasheet/pine64/0.5FPC%20Front%20Open%20Connector%20H=1.5.pdf[0.5mm Pitch cover type FPC connector specification use in DSI port, TP port and CSI port] - -Remote control button mapping: - -* https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg[Official Remote Control for the PINE A64 Button Mapping] - diff --git a/content/documentation/SOPINE/Further_information/Schematics_and_certifications.md b/content/documentation/SOPINE/Further_information/Schematics_and_certifications.md new file mode 100644 index 00000000..6f7c6017 --- /dev/null +++ b/content/documentation/SOPINE/Further_information/Schematics_and_certifications.md @@ -0,0 +1,80 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "SOPINE/Further_information" + identifier: "SOPINE/Further_information/Schematics_and_certifications" + weight: 2 +--- + +SOPINE module schematic: + +* [SOPINE Module Schematic](https://files.pine64.org/doc/SOPINE-A64/SOPINE-A64-Schematic-ver-0.9.pdf) + +SOPINE pin assignments: + +* [SOPINE Module Pin Assignment ver 1.0](https://files.pine64.org/doc/SOPINE-A64/SOPINE-A64-Pin-Assignments-ver-1.0.pdf) + +PINE A64-LTS / SOPINE WiFi/BT module schematic: + +* [PINE A64 WiFi/BT Module Schematic](https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf) + +PINE A64-LTS / SOPINE Stereo Audio DAC board schematic: + +* [PINE A64-LTS / SOPINE Stereo Audio DAC Board Schematic](https://forum.pine64.org/attachment.php?aid=697) + +SOPINE (together with model "A" baseboard) certification: + +* [SOPINE with model "A" baseboard FCC Certificate](https://files.pine64.org/doc/cert/SOPine%20FCC%20certification%20VOC20170428.pdf) +* [SOPINE with model "A" baseboard CE Certificate](https://files.pine64.org/doc/cert/SOPine%20CE%20certification%20VOC20170428.pdf) +* [SOPINE with model "A" baseboard RoHS Certificate](https://files.pine64.org/doc/cert/SOPine%20ROHS%20certification%20VOC20170322.pdf) + +## PINE A64, PINE A64+, PINE A64-LTS and SOPINE related + +Five megapixel CMOS camera module information: + +* [PINE64 YL-PINE64-4EC 5M Pixel CMOS Image Sensor Module (Description in Chinese)](https://files.pine64.org/doc/datasheet/pine64/YL-PINE64-4EC.pdf) +* [S5K4EC 5MP CMOS Image Sensor SoC Module Datasheet](https://files.pine64.org/doc/datasheet/pine64/S5K4EC%205M%208%205X8%205%20PLCC%20%20Data%20Sheet_V1.0.pdf) +* [S5K4EC 5MP CMOS Image Sensor SoC Chip Datasheet](https://files.pine64.org/doc/datasheet/pine64/S5K4ECGX_EVT1_DataSheet_R005_20100816.pdf) +* [S5K4EC 5MP CMOS Image Sensor Driver Source Code in C language](https://files.pine64.org/doc/datasheet/pine64/s5k4ec.c) + +Early version Camera module information: + +* [Bonsen Kexin V118-A64-GC2145-HM5065 CMOS Image Sensor Module](https://files.pine64.org/doc/datasheet/pine64/D116-A64_Bonsen_cmos_camera.pdf) +* [HiMax 5MP CMOS Image Sensor SoC](https://files.pine64.org/doc/datasheet/pine64/HM5065-DS-V03.pdf) + +LCD Touch Screen Panel information: + +* [7.0" 1200x600 TFT-LCD Panel Specification](https://files.pine64.org/doc/datasheet/pine64/FY07024DI26A30-D_feiyang_LCD_panel.pdf) +* [Touch Panel Specification](https://files.pine64.org/doc/datasheet/pine64/HK70DR2459-PG-V01.pdf) +* [GOODiX GT911 5-Point Capacitive Touch Controller Datasheet](https://files.pine64.org/doc/datasheet/pine64/GT911%20Capacitive%20Touch%20Controller%20Datasheet.pdf) + +Lithium battery information: + +* [8000mAH Lithium Battery Specification](https://files.pine64.org/doc/datasheet/pine64/9070120P%203.7V%208000MAH.pdf) + +Ethernet PHY information: + +* [Realtek RTL8211 10/100/1000M Ethernet Transceiver for PINE A64-LTS Board and SOPINE Baseboard](https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf) + +WiFi/BT module information: + +* [PINE A64 Wifi/BT Module Schematic](https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf) +* [Realtek RTL8723BS WiFi with BT SDIO](https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf) + +Enclosure information: + +* [Playbox Enclosure 3D file](https://files.pine64.org/doc/datasheet/case/playbox_enclosure_20160426.stp) +* [ABS Enclosure 3D file](https://files.pine64.org/doc/datasheet/case/ABS_enclosure_20160426.stp) +* [Outdoor Aluminum Cast Dust-proof IP67 Enclosure Drawing](https://files.pine64.org/doc/datasheet/case/pine64%20Die%20Cast%20casing-final.jpg) + +Connector information: + +* [2.0mm PH Type connector specification use in Lithium Battery (VBAT) port and RTC Battery port](https://files.pine64.org/doc/datasheet/pine64/ePH.pdf) +* [0.5mm Pitch cover type FPC connector specification use in DSI port, TP port and CSI port](https://files.pine64.org/doc/datasheet/pine64/0.5FPC%20Front%20Open%20Connector%20H=1.5.pdf) + +Remote control button mapping: + +* [Official Remote Control for the PINE A64 Button Mapping](https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg) diff --git a/content/documentation/SOPINE_Baseboard/Schematics_and_certifications.adoc b/content/documentation/SOPINE_Baseboard/Schematics_and_certifications.adoc deleted file mode 100644 index 245b2563..00000000 --- a/content/documentation/SOPINE_Baseboard/Schematics_and_certifications.adoc +++ /dev/null @@ -1,30 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "SOPINE_Baseboard" - identifier: "SOPINE_Baseboard/Schematics_and_certifications" - weight: 99 ---- - -SOPINE Model "A" Baseboard schematic and PCB board resources: - -* SOPINE model "A" Baseboard is an hardware open source project but is not "OSH" compliant -* https://files.pine64.org/doc/SOPINE-A64/SOPine%20Baseboard%20Model%20A%20Rev%20B20170207.DSN[SOPINE Model "A" Baseboard Schematic capture Rev B DSN source file] -* https://files.pine64.org/doc/SOPINE-A64/SOPine%20Baseboard%20Model%20A%20Rev%20B20170207.pdf[SOPINE Model "A" Baseboard Schematic Rev B PDF file] -* https://files.pine64.org/doc/SOPINE-A64/SOPine%20Model%20A%20baseboard%20PCB%20layout%20PCB%20Job.tar[SOPINE Model "A" Baseboard PCB Job source file] -* https://files.pine64.org/doc/SOPINE-A64/SOPine%20Model%20A%20basedboard%20GERBER.tar[SOPINE Model "A" Baseboard PCB Gerber file] -* https://files.pine64.org/doc/SOPINE-A64/SOPine%20Model%20A%20baseboard%20PCB%20layout%20PDF.tar[SOPINE Model "A" Baseboard PCB Layout PDF file] - -SOPINE (together with model "A" baseboard) certification: - -* https://files.pine64.org/doc/cert/SOPine%20FCC%20certification%20VOC20170428.pdf[SOPINE with model "A" baseboard FCC Certificate] -* https://files.pine64.org/doc/cert/SOPine%20CE%20certification%20VOC20170428.pdf[SOPINE with model "A" baseboard CE Certificate] -* https://files.pine64.org/doc/cert/SOPine%20ROHS%20certification%20VOC20170322.pdf[SOPINE with model "A" baseboard RoHS Certificate] - -Ethernet PHY information: - -* https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf[Realtek RTL8211 10/100/1000M Ethernet Transceiver for PINE A64-LTS Board and SOPINE Baseboard] - diff --git a/content/documentation/SOPINE_Baseboard/Schematics_and_certifications.md b/content/documentation/SOPINE_Baseboard/Schematics_and_certifications.md new file mode 100644 index 00000000..3c8cfa56 --- /dev/null +++ b/content/documentation/SOPINE_Baseboard/Schematics_and_certifications.md @@ -0,0 +1,29 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "SOPINE_Baseboard" + identifier: "SOPINE_Baseboard/Schematics_and_certifications" + weight: 99 +--- + +SOPINE Model "A" Baseboard schematic and PCB board resources: + +* SOPINE model "A" Baseboard is an hardware open source project but is not "OSH" compliant +* [SOPINE Model "A" Baseboard Schematic capture Rev B DSN source file](https://files.pine64.org/doc/SOPINE-A64/SOPine%20Baseboard%20Model%20A%20Rev%20B20170207.DSN) +* [SOPINE Model "A" Baseboard Schematic Rev B PDF file](https://files.pine64.org/doc/SOPINE-A64/SOPine%20Baseboard%20Model%20A%20Rev%20B20170207.pdf) +* [SOPINE Model "A" Baseboard PCB Job source file](https://files.pine64.org/doc/SOPINE-A64/SOPine%20Model%20A%20baseboard%20PCB%20layout%20PCB%20Job.tar) +* [SOPINE Model "A" Baseboard PCB Gerber file](https://files.pine64.org/doc/SOPINE-A64/SOPine%20Model%20A%20basedboard%20GERBER.tar) +* [SOPINE Model "A" Baseboard PCB Layout PDF file](https://files.pine64.org/doc/SOPINE-A64/SOPine%20Model%20A%20baseboard%20PCB%20layout%20PDF.tar) + +SOPINE (together with model "A" baseboard) certification: + +* [SOPINE with model "A" baseboard FCC Certificate](https://files.pine64.org/doc/cert/SOPine%20FCC%20certification%20VOC20170428.pdf) +* [SOPINE with model "A" baseboard CE Certificate](https://files.pine64.org/doc/cert/SOPine%20CE%20certification%20VOC20170428.pdf) +* [SOPINE with model "A" baseboard RoHS Certificate](https://files.pine64.org/doc/cert/SOPine%20ROHS%20certification%20VOC20170322.pdf) + +Ethernet PHY information: + +* [Realtek RTL8211 10/100/1000M Ethernet Transceiver for PINE A64-LTS Board and SOPINE Baseboard](https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf) diff --git a/content/documentation/SOPINE_Baseboard/Specifications.adoc b/content/documentation/SOPINE_Baseboard/Specifications.md similarity index 99% rename from content/documentation/SOPINE_Baseboard/Specifications.adoc rename to content/documentation/SOPINE_Baseboard/Specifications.md index ab7823c9..32036e4b 100644 --- a/content/documentation/SOPINE_Baseboard/Specifications.adoc +++ b/content/documentation/SOPINE_Baseboard/Specifications.md @@ -25,4 +25,3 @@ menu: * Optional 802.11GBN + BT 4.0 module expansion module * Headphone jack * 3.5mm Barrel Power (5V 3A) port - diff --git a/content/documentation/SOQuartz/Further_information/Datasheets.adoc b/content/documentation/SOQuartz/Further_information/Datasheets.adoc deleted file mode 100644 index c3e84a86..00000000 --- a/content/documentation/SOQuartz/Further_information/Datasheets.adoc +++ /dev/null @@ -1,51 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "SOQuartz/Further_information" - identifier: "SOQuartz/Further_information/Datasheets" - weight: ---- - -Rockchip RK3566 SoC information: - -* https://files.pine64.org/doc/quartz64/Rockchip%20RK3566%20Datasheet%20V1.0-20201210.pdf[Rockchip RK3566 ver 1.0 datasheet, already got release permission from Rockchip] - -Rockchip PMU (Power Management Unit) Information: - -* https://www.rockchip.fr/RK809%20datasheet%20V1.01.pdf[Rockchip RK809 ver 1.01 datasheet for SOQuartz PMU] - -DDR4 information: - -* https://files.pine64.org/doc/datasheet/rockpro64/SM512M32Z01MD2BNP(200BALL).pdf[Micron LPDDR4 Mobile LPDDR4 Datasheet] - -eMMC information: - -* https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf[PINE64 eMMC module schematic] -* https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf[PINE64 USB adapter for eMMC module V2 schematic] -* https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar[PINE64 USB adapter for eMMC module PCB in JPEG] -* https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf[16GB Foresee eMMC Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf[32GB/64GB/128GB SanDisk eMMC Datasheet] - -//SPI NOR Flash information: - -Ethernet PHY information: - -* https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf[Realtek RTL8211 10/100/1000M Ethernet Transceiver] - -WiFi/BT module info: - -* https://files.pine64.org/doc/datasheet/rockpro64/AW-CM256SM_DS_DF_V1.9_STD.pdf[Azurewave CM256SM 11AC WiFi + Bluetooth5.0 Datasheet] - -i2C to PWM Controller user in BLADE info: - -* https://files.pine64.org/doc/datasheet/quartz64/GP7101_cn_V1_qsxn.pdf[GP7101 i2c to PWM Controller Datasheet in Chinese] -* GP7101 i2c to PWM Controller Datasheet translated to English by neggles https://wiki.pine64.org/wiki/File:GP7101 cn V1 qsxn en.pdf -* I^2^C address is 0x58 despite what datasheet says - -PoE DC/DC Controller user in BLADE info: - -* https://files.pine64.org/doc/datasheet/quartz64/SD4954B%20Datasheet.pdf[Silan SD4954B PD and DC/DC Controller compatible with IEEE 802.3AF standard Datasheet] - diff --git a/content/documentation/SOQuartz/Further_information/Datasheets.md b/content/documentation/SOQuartz/Further_information/Datasheets.md new file mode 100644 index 00000000..f32e1293 --- /dev/null +++ b/content/documentation/SOQuartz/Further_information/Datasheets.md @@ -0,0 +1,48 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "SOQuartz/Further_information" + identifier: "SOQuartz/Further_information/Datasheets" + weight: +--- + +Rockchip RK3566 SoC information: + +* [Rockchip RK3566 ver 1.0 datasheet, already got release permission from Rockchip](https://files.pine64.org/doc/quartz64/Rockchip%20RK3566%20Datasheet%20V1.0-20201210.pdf) + +Rockchip PMU (Power Management Unit) Information: + +* [Rockchip RK809 ver 1.01 datasheet for SOQuartz PMU](https://www.rockchip.fr/RK809%20datasheet%20V1.01.pdf) + +DDR4 information: + +* [Micron LPDDR4 Mobile LPDDR4 Datasheet](https://files.pine64.org/doc/datasheet/rockpro64/SM512M32Z01MD2BNP(200BALL).pdf) + +eMMC information: + +* [PINE64 eMMC module schematic](https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf) +* [PINE64 USB adapter for eMMC module V2 schematic](https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf) +* [PINE64 USB adapter for eMMC module PCB in JPEG](https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar) +* [16GB Foresee eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf) +* [32GB/64GB/128GB SanDisk eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf) + +Ethernet PHY information: + +* [Realtek RTL8211 10/100/1000M Ethernet Transceiver](https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf) + +WiFi/BT module info: + +* [Azurewave CM256SM 11AC WiFi + Bluetooth5.0 Datasheet](https://files.pine64.org/doc/datasheet/rockpro64/AW-CM256SM_DS_DF_V1.9_STD.pdf) + +i2C to PWM Controller user in BLADE info: + +* [GP7101 i2c to PWM Controller Datasheet in Chinese](https://files.pine64.org/doc/datasheet/quartz64/GP7101_cn_V1_qsxn.pdf) +* GP7101 i2c to PWM Controller Datasheet translated to English by neggles https://wiki.pine64.org/wiki/File:GP7101 cn V1 qsxn en.pdf +* I^2^C address is 0x58 despite what datasheet says + +PoE DC/DC Controller user in BLADE info: + +* [Silan SD4954B PD and DC/DC Controller compatible with IEEE 802.3AF standard Datasheet](https://files.pine64.org/doc/datasheet/quartz64/SD4954B%20Datasheet.pdf) diff --git a/content/documentation/SOQuartz/Further_information/Schematics_and_certifications.adoc b/content/documentation/SOQuartz/Further_information/Schematics_and_certifications.adoc deleted file mode 100644 index d4a2a616..00000000 --- a/content/documentation/SOQuartz/Further_information/Schematics_and_certifications.adoc +++ /dev/null @@ -1,41 +0,0 @@ ---- -title: "Schematics and certifications" -draft: false -menu: - docs: - title: - parent: "SOQuartz/Further_information" - identifier: "SOQuartz/Further_information/Schematics_and_certifications" - weight: ---- - -SOQuartz Module Schematic: - -* https://files.pine64.org/doc/quartz64/SOQuartz_SOM_schematic_v1.1_20210816.pdf[SOQuartz Module ver 1.1 20210816 Schematic] -* https://files.pine64.org/doc/quartz64/SOQuartz-PCB-placement-v1.1.pdf[SOQuartz Module ver 1.1 20210816 PCB Component Placement] - -SOQuartz Model "A" Baseboard Schematic and PCB Board Resource: - -* https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-Schematic-20220522.pdf[SOQuartz Model-A baseboard 20220522 Schematic PDF file] -* https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-Schematic-20220522.DSN[SOQuartz Model-A baseboard 20220522 Schematic DSN source file] -* https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-Component-Placement_top-20220522.pdf[SOQuartz SOQuartz Model-A baseboard 20220522 PCB Top Component Placement] -* https://files.pine64.org/doc/quartz64/SOQuartz_Model_A_Baseboard_Component_Placement_bottom_20220522.pdf[SOQuartz SOQuartz Model-A baseboard 20220522 PCB Bottom Component Placement] -* https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-PCB-20220522.dsn[SOQuartz Model-A baseboard 20220522 PCB DSN file] -* https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-PCB-20220522.rar[SOQuartz Model-A baseboard 20220522 PCB Gerber file] - -image:/documentation/SOQuartz/images/BLADE_1U_half_width_server_rack.jpg[SOQuartz_BLADE_3D_Print_1U_half_width_server_rack,title="SOQuartz_BLADE_3D_Print_1U_half_width_server_rack",width=400] - -image:/documentation/SOQuartz/images/BLADE_1U_full_width_server_rack.jpg[SOQuartz BLADE 3D Print 1U full width server rack,title="SOQuartz BLADE 3D Print 1U full width server rack",width=400] - -SOQuartz Blade Baseboard Schematic and PCB Board Resource: - -* https://files.pine64.org/doc/quartz64/SOQuartz-BLADE-Baseboard-Schematic-20220522.pdf[SOQuartz BLADE 20220522 Schematic] -* https://files.pine64.org/doc/quartz64/SOQuartz-BLADE-PCB-Placement-20220522.pdf[SOQuartz BLADE 20220522 PCB component Placement] -* https://files.pine64.org/doc/quartz64/BLADE%201U%20Rack_3D.stp[SOQuartz BLADE 1U Rack STP file] - -image:/documentation/SOQuartz/images/BLADE_1U_rack_3D.jpg[width=400] - -SOQuartz module certifications: - -* https://files.pine64.org/doc/cert/SOQuartz%20FCC%20Certificate-S21101902401001.pdf[SOQuartz module FCC Certificate] -* https://files.pine64.org/doc/cert/SOQuartz%20CE%20Certificate-S21101902402001.pdf[SOQuartz module CE EMC Certificate] \ No newline at end of file diff --git a/content/documentation/SOQuartz/Further_information/Schematics_and_certifications.md b/content/documentation/SOQuartz/Further_information/Schematics_and_certifications.md new file mode 100644 index 00000000..01c788ca --- /dev/null +++ b/content/documentation/SOQuartz/Further_information/Schematics_and_certifications.md @@ -0,0 +1,41 @@ +--- +title: "Schematics and certifications" +draft: false +menu: + docs: + title: + parent: "SOQuartz/Further_information" + identifier: "SOQuartz/Further_information/Schematics_and_certifications" + weight: +--- + +SOQuartz Module Schematic: + +* [SOQuartz Module ver 1.1 20210816 Schematic](https://files.pine64.org/doc/quartz64/SOQuartz_SOM_schematic_v1.1_20210816.pdf) +* [SOQuartz Module ver 1.1 20210816 PCB Component Placement](https://files.pine64.org/doc/quartz64/SOQuartz-PCB-placement-v1.1.pdf) + +SOQuartz Model "A" Baseboard Schematic and PCB Board Resource: + +* [SOQuartz Model-A baseboard 20220522 Schematic PDF file](https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-Schematic-20220522.pdf) +* [SOQuartz Model-A baseboard 20220522 Schematic DSN source file](https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-Schematic-20220522.DSN) +* [SOQuartz SOQuartz Model-A baseboard 20220522 PCB Top Component Placement](https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-Component-Placement_top-20220522.pdf) +* [SOQuartz SOQuartz Model-A baseboard 20220522 PCB Bottom Component Placement](https://files.pine64.org/doc/quartz64/SOQuartz_Model_A_Baseboard_Component_Placement_bottom_20220522.pdf) +* [SOQuartz Model-A baseboard 20220522 PCB DSN file](https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-PCB-20220522.dsn) +* [SOQuartz Model-A baseboard 20220522 PCB Gerber file](https://files.pine64.org/doc/quartz64/SOQuartz-Model-A-Baseboard-PCB-20220522.rar) + +![SOQuartz_BLADE_3D_Print_1U_half_width_server_rack](/documentation/SOQuartz/images/BLADE_1U_half_width_server_rack.jpg) + +![SOQuartz BLADE 3D Print 1U full width server rack](/documentation/SOQuartz/images/BLADE_1U_full_width_server_rack.jpg) + +SOQuartz Blade Baseboard Schematic and PCB Board Resource: + +* [SOQuartz BLADE 20220522 Schematic](https://files.pine64.org/doc/quartz64/SOQuartz-BLADE-Baseboard-Schematic-20220522.pdf) +* [SOQuartz BLADE 20220522 PCB component Placement](https://files.pine64.org/doc/quartz64/SOQuartz-BLADE-PCB-Placement-20220522.pdf) +* [SOQuartz BLADE 1U Rack STP file](https://files.pine64.org/doc/quartz64/BLADE%201U%20Rack_3D.stp) + +![width=400](/documentation/SOQuartz/images/BLADE_1U_rack_3D.jpg) + +SOQuartz module certifications: + +* [SOQuartz module FCC Certificate](https://files.pine64.org/doc/cert/SOQuartz%20FCC%20Certificate-S21101902401001.pdf) +* [SOQuartz module CE EMC Certificate](https://files.pine64.org/doc/cert/SOQuartz%20CE%20Certificate-S21101902402001.pdf) diff --git a/content/documentation/SOQuartz/Further_information/Specifications.adoc b/content/documentation/SOQuartz/Further_information/Specifications.md similarity index 74% rename from content/documentation/SOQuartz/Further_information/Specifications.adoc rename to content/documentation/SOQuartz/Further_information/Specifications.md index 5d76255d..7ce1522e 100644 --- a/content/documentation/SOQuartz/Further_information/Specifications.adoc +++ b/content/documentation/SOQuartz/Further_information/Specifications.md @@ -9,11 +9,11 @@ menu: weight: --- -The SOQuartz is based on the https://www.rock-chips.com/a/en/products/RK35_Series/2021/0113/1274.html[Rockchip RK3566]. +The SOQuartz is based on the [Rockchip RK3566](https://www.rock-chips.com/a/en/products/RK35_Series/2021/0113/1274.html). -== CPU Architecture +## CPU Architecture -* https://developer.arm.com/ip-products/processors/cortex-a/cortex-a55[Quad-core ARM Cortex-A55@1.8GHz] +* [Quad-core ARM Cortex-A55@1.8GHz](https://developer.arm.com/ip-products/processors/cortex-a/cortex-a55) * AArch32 for full backwards compatibility with ARMv7 * ARM Neon Advanced SIMD (single instruction, multiple data) support for accelerated media and signal processing computation * Includes VFP hardware to support single and double-precision operations @@ -21,9 +21,9 @@ The SOQuartz is based on the https://www.rock-chips.com/a/en/products/RK35_Serie * Integrated 32KB L1 instruction cache and 32KB L1 data cache per core * 512KB unified system L3 cache -== GPU (Graphics Processing Unit) Capabilities +## GPU (Graphics Processing Unit) Capabilities -* https://developer.arm.com/ip-products/graphics-and-multimedia/mali-gpus/mali-g52-gpu[Mali-G52 2EE Bifrost GPU@800MHz] +* [Mali-G52 2EE Bifrost GPU@800MHz](https://developer.arm.com/ip-products/graphics-and-multimedia/mali-gpus/mali-g52-gpu) * 4x Multi-Sampling Anti-Aliasing (MSAA) with minimal performance drop * 128KB L2 Cache configurations * Supports OpenGL ES 1.1, 2.0, and 3.2 @@ -32,23 +32,23 @@ The SOQuartz is based on the https://www.rock-chips.com/a/en/products/RK35_Serie * Supports 1600 Mpix/s fill rate when at 800MHz clock frequency * Supports 38.4 GLOP/s when at 800MHz clock frequency -== Neural Process Unit NPU Capability +## Neural Process Unit NPU Capability * Neural network acceleration engine with processing performance of up to 0.8 TOPS * Supports integer 8 and integer 16 convolution operations * Supports the following deep learning frameworks: TensorFlow, TF-lite, Pytorch, Caffe, ONNX, MXNet, Keras, Darknet -== System Memory +## System Memory * RAM Memory Variants: 2GB, 4GB, 8GB LPDDR4. * Storage Memory: optional 128Mb SPI Flash and optional eMMC module from 8GB up to 128GB -== Network +## Network * 10/100/1000Mbps Ethernet * WiFi 802.11 b/g/n/ac with Bluetooth 5.0 -== Displays / Cameras +## Displays / Cameras * 1x HDMI * 2x DSI @@ -56,10 +56,10 @@ The SOQuartz is based on the https://www.rock-chips.com/a/en/products/RK35_Serie * 1x LVDS (not available when dual-mode DSI) * 1x CSI 4-line -== Connectivity +## Connectivity * 1x Ethernet (1Gbit) * 1x USB 2.0 OTG * 1x SD Card (SD) * 1x PCIe 1-Line -* 28x GPIO (TBD) \ No newline at end of file +* 28x GPIO (TBD) diff --git a/content/documentation/STAR64/Further_information/Datasheets.adoc b/content/documentation/STAR64/Further_information/Datasheets.adoc deleted file mode 100644 index c7a03235..00000000 --- a/content/documentation/STAR64/Further_information/Datasheets.adoc +++ /dev/null @@ -1,44 +0,0 @@ ---- -title: "Datasheets" -draft: false -menu: - docs: - title: - parent: "STAR64/Further_information" - identifier: "STAR64/Further_information/Datasheets" - weight: ---- - -Star64 JH7110 SoC information: - -* https://doc-en.rvspace.org/JH7110/PDF/JH7110_Product_Brief.pdf[StarFive JH7110 SoC Product Brief] -* https://doc-en.rvspace.org/JH7110/PDF/JH7110_Datasheet.pdf[StarFive JH7110 SoC Datasheet] -* https://doc-en.rvspace.org/JH7110/TRM/[StarFive JH7110 SoC Technical Reference Manual] - -X-Power PMU information: - -* https://files.pine64.org/doc/datasheet/star64/AXP15060%20datasheet%20V0.1.pdf[X-Power AXP15060 Datasheet V0.1] - -LPDDR4 (200 Balls) SDRAM: - -* https://files.pine64.org/doc/datasheet/rockpro64/SM512M32Z01MD2BNP(200BALL).pdf[Micron LPDDR4 Mobile LPDDR4 Datasheet] - -eMMC information: - -* https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf[PINE64 eMMC module schematic] -* https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf[PINE64 USB adapter for eMMC module V2 schematic] -* https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar[PINE64 USB adapter for eMMC module PCB in JPEG] -* https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf[16GB Foresee eMMC Datasheet] -* https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf[32GB/64GB/128GB SanDisk eMMC Datasheet] - -SPI NOR Flash information: - -* https://files.pine64.org/doc/datasheet/star64/gd25lq128e_rev1.0_20210513.pdf[GigaDevice 128Mb XSPI-Flash Datasheet] - -Ethernet related info: - -* TBA - -WiFi/BT module info: - -* https://files.pine64.org/doc/datasheet/star64/Fn-Link_6252B-UUB_datasheet_V1.1_20220329.pdf[Fn-Link 6252B 11AC Dual Band 2T2R WiFi + Bluetooth5.2 Datasheet] \ No newline at end of file diff --git a/content/documentation/STAR64/Further_information/Datasheets.md b/content/documentation/STAR64/Further_information/Datasheets.md new file mode 100644 index 00000000..4ae3f9db --- /dev/null +++ b/content/documentation/STAR64/Further_information/Datasheets.md @@ -0,0 +1,38 @@ +--- +title: "Datasheets" +draft: false +menu: + docs: + title: + parent: "STAR64/Further_information" + identifier: "STAR64/Further_information/Datasheets" + weight: +--- + +Star64 JH7110 SoC information: + +* [StarFive JH7110 SoC Product Brief](https://doc-en.rvspace.org/JH7110/PDF/JH7110_Product_Brief.pdf) +* [StarFive JH7110 SoC Datasheet](https://doc-en.rvspace.org/JH7110/PDF/JH7110_Datasheet.pdf) +* [StarFive JH7110 SoC Technical Reference Manual](https://doc-en.rvspace.org/JH7110/TRM/) + +X-Power PMU information: +* [X-Power AXP15060 Datasheet V0.1](https://files.pine64.org/doc/datasheet/star64/AXP15060%20datasheet%20V0.1.pdf) + +LPDDR4 (200 Balls) SDRAM: +* [Micron LPDDR4 Mobile LPDDR4 Datasheet](https://files.pine64.org/doc/datasheet/rockpro64/SM512M32Z01MD2BNP(200BALL).pdf) + +eMMC information: +* [PINE64 eMMC module schematic](https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf) +* [PINE64 USB adapter for eMMC module V2 schematic](https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf) +* [PINE64 USB adapter for eMMC module PCB in JPEG](https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar) +* [16GB Foresee eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf) +* [32GB/64GB/128GB SanDisk eMMC Datasheet](https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf) + +SPI NOR Flash information: +* [GigaDevice 128Mb XSPI-Flash Datasheet](https://files.pine64.org/doc/datasheet/star64/gd25lq128e_rev1.0_20210513.pdf) + +Ethernet related info: +* TBA + +WiFi/BT module info: +* [Fn-Link 6252B 11AC Dual Band 2T2R WiFi + Bluetooth5.2 Datasheet](https://files.pine64.org/doc/datasheet/star64/Fn-Link_6252B-UUB_datasheet_V1.1_20220329.pdf) diff --git a/content/documentation/STAR64/Further_information/Schematics_and_certifications.adoc b/content/documentation/STAR64/Further_information/Schematics_and_certifications.md similarity index 86% rename from content/documentation/STAR64/Further_information/Schematics_and_certifications.adoc rename to content/documentation/STAR64/Further_information/Schematics_and_certifications.md index 72047a70..3e5e6f79 100644 --- a/content/documentation/STAR64/Further_information/Schematics_and_certifications.adoc +++ b/content/documentation/STAR64/Further_information/Schematics_and_certifications.md @@ -15,10 +15,9 @@ Input Power: DC 12V @ 3A 5.5mmOD/2.1mm ID center-positive Barrel DC Jack connect Schematic: -* https://files.pine64.org/doc/star64/Star64_Schematic_V1.0_20220721.pdf[STAR64 Schematic 20220721 v1.0 (Prototype Board)] +* [STAR64 Schematic 20220721 v1.0 (Prototype Board)](https://files.pine64.org/doc/star64/Star64_Schematic_V1.0_20220721.pdf) Certifications: * Disclaimer: Please note that PINE64 SBC is not a "final" product and in general certification is not necessary. However, PINE64 still submits the SBC for FCC, CE, and ROHS certifications and obtain the certificates to prove that the SBC board can pass the testing. Please note, a final commercial product needs to perform its own testing and obtain its own certificate. * Not yet available - diff --git a/content/documentation/test.adoc b/content/documentation/test.adoc deleted file mode 100644 index 5888b891..00000000 --- a/content/documentation/test.adoc +++ /dev/null @@ -1,42 +0,0 @@ ---- -title: "Test" -draft: false -menu: - docs: - title: - parent: - identifier: "Test" - weight: ---- - -Test `test` test - -Test `test test test test test test test test test test test test test test test test test test test test testtesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttettesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttest` test - -test test test test test test test test test test test test test test test test test test test test - -[source,shell] ----- -echo "Short code" ----- - -[source,shell] ----- -echo "This is a short line." -echo "This is a long line. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum." -echo "This is another short line." ----- - -[source,shell,foo.sh] ----- -echo "This is a short line." -echo "This is a long line. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum." -echo "This is another short line." ----- - -[source,shell,title='Test file'] ----- -echo "This is a short line." -echo "This is a long line. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum." -echo "This is another short line." ----- \ No newline at end of file diff --git a/themes/pinetheme/assets/css/documentation.css b/themes/pinetheme/assets/css/documentation.css index afd653cd..46be9d5c 100644 --- a/themes/pinetheme/assets/css/documentation.css +++ b/themes/pinetheme/assets/css/documentation.css @@ -261,3 +261,10 @@ div#doc-page .ulist { background-color: #f70; color: white; } + + +#doc-page figcaption h4 { + color: #585858; + font-weight: 300; + font-style: italic; +} \ No newline at end of file