Skip to content

pierstu/54hp-Laser-Cut-Eurorack-Case

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

25 Commits
 
 
 
 
 
 

Repository files navigation

Laser Cut Eurorack Case

Laser cut 3u 54hp eurorack case.

  • forked from SYINSI | repo
  • !!!! currently in beta !!!! If you make it, feel free to push issues if any, send pictures or keep me updated !
  • Fits a Dreadbox mini-bus
  • Updated in Inkscape, now in 500 DPI!, .svg only
  • Cut red first, then blue, then green
  • Single-cut shapes

Issues

  • drilling holes on "rails" are too large, i'll take a look next time i'm on it
  • meanwhile select them all and see how it works between 2.5 and 2.75mm if you do it
  • Cut from 6mm hardboard
  • Uses pre-drilled holes that fits many different screw sizes
  • Around 54hp wide, and 65mm deep.

The rails are built in and laser cut to accommodate M3 bolts. They're cut slightly smaller so the bolt cuts threads in the wood and holds the panel tightly. Hardboard isn't the most durable material so you're not going to want to rearrange the panels too often.

About

Laser cut 54hp eurorack case - fork form SYINSI

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published