service.sh

#!/system/bin/sh
MODDIR=${0%/*}
# Do NOT assume where your module will be located.
# ALWAYS use $MODDIR if you need to know where this script
# and module is placed.
# This will make sure your module will work
# if Magisk changes it's mount point in the future

# MODULE VARS
CLOUDROOTMOUNTPOINT=/mnt/cloud
USER_CONFDIR=/sdcard/Android/.rclone
USER_CONF=$USER_CONFDIR/rclone.conf
PROFILE=0
DATA_MEDIA=/data/media
RUNTIME_R=/mnt/runtime/read
RUNTIME_W=/mnt/runtime/write
RUNTIME_D=/mnt/runtime/default
BINDPOINT_R=${RUNTIME_R}/emulated/${PROFILE}/Cloud
BINDPOINT_W=${RUNTIME_W}/emulated/${PROFILE}/Cloud
BINDPOINT_D=${RUNTIME_D}/emulated/${PROFILE}/Cloud
SD_BINDPOINT=${BINDPOINT_D}
DISABLE=0
NETCHK=1

# DEFAULT RCLONE PARAMETERS
CONFIGFILE=${MODDIR}/.config/rclone/rclone.conf
LOGFILE=${USER_CONFDIR}/rclone.log
LOGLEVEL=NOTICE
CACHE=/data/rclone/cache
CACHE_BACKEND=/data/rclone/cache/cache-backend
CACHEMODE=off
READCHUNKSIZE=1M
CACHEMAXSIZE=1G
CHUNKSIZE=1M
CHUNKTOTAL=1G
CACHEWORKERS=1
CACHEINFOAGE=1h0m0s
DIRCACHETIME=30m0s
ATTRTIMEOUT=30s
BUFFERSIZE=0
READAHEAD=128k
M_UID=0
M_GID=1015
DIRPERMS=0775
FILEPERMS=0644
UMASK=002
BINDSD=1
SYNC_WIFI=1
SYNC_CHARGE=0
SYNC_BATTLVL=0
HTTP=0
HTTP_ADDR=127.0.0.1:38762
FTP=0
FTP_ADDR=127.0.0.1:38763
SFTP=0
SFTP_ADDR=127.0.0.1:38722
SFTP_USER=
SFTP_PASS=

if [[ -z ${INTERACTIVE} ]]; then
    INTERACTIVE=0
fi

if [[ ! -d ${MODDIR}/.config/rclone ]]; then
    mkdir -p ${MODDIR}/.config/rclone
fi

NETCHK_ADDR="8.8.8.8"
custom_params() {
    if [[ ${remote} = global ]]; then
        PARAMS="DISABLE LOGFILE LOGLEVEL CACHEMODE CHUNKSIZE CHUNKTOTAL CACHEWORKERS CACHEINFOAGE DIRCACHETIME ATTRTIMEOUT BUFFERSIZE READAHEAD M_UID M_GID DIRPERMS FILEPERMS READONLY BINDSD ADD_PARAMS REPLACE_PARAMS NETCHK NETCHK_IF NETCHK_ADDR HTTP FTP HTTP_ADDR FTP_ADDR SFTP SFTP_ADDR SFTP_USER SFTP_PASS PROFILE ISOLATE"
    else
        PARAMS="DISABLE LOGFILE LOGLEVEL CACHEMODE CHUNKSIZE CHUNKTOTAL CACHEWORKERS CACHEINFOAGE DIRCACHETIME ATTRTIMEOUT BUFFERSIZE READAHEAD M_UID M_GID DIRPERMS FILEPERMS READONLY BINDSD SDBINDPOINT ADD_PARAMS REPLACE_PARAMS PROFILE ISOLATE SDSYNCDIRS SYNC_WIFI SYNC_BATTLVL SYNC_CHARGE SUBPATH"
    fi
    BAD_SYNTAX="(^\s*#|^\s*$|^\s*[a-z_][^[:space:]]*=[^;&\(\`]*$)"
    if [[ -e ${USER_CONFDIR}/.${remote}.param ]]; then
        echo "Found .${remote}.param"
        if ! [[ $(egrep -q -iv "${BAD_SYNTAX}" ${USER_CONFDIR}/.${remote}.param) ]]; then
            echo "loading .${remote}.param"
            # FIX: Unnecessary and very inefficient double loop
            for PARAM in ${PARAMS[@]}; do
                while read -r VAR; do
                    if [[ "$(echo "${VAR}" | grep "$PARAM=")" ]]; then
                        echo "Importing ${VAR}"
                        VALUE="$(echo ${VAR} | cut -d '=' -f2)"
                        VALUE=\"${VALUE}\"
                        # Unnecessary echo in a subshell execution below? Why not just:
                        # eval "${PARAM}""=""${VALUE}"
                        eval $(echo "${PARAM}""=""${VALUE}")
                    fi
                done <${USER_CONFDIR}/.${remote}.param
            done
        else
            echo ".${remote}.param contains bad syntax"
        fi
    fi
}

global_params() {
    remote=global
    custom_params
    unset remote
    echo
}

net_chk() {
    if [ -z ${NETCHK_IF} ]; then
        NETCHK_IF=" "
    else
        NETCHK_IF=" -I ${NETCHK_IF} "
    fi
    ping ${NETCHK_IF} -c 5 ${NETCHK_ADDR}
}

sd_unbind() {
    if [[ -z ${SDBINDPOINT} ]]; then
        UNBINDPOINT=${BINDPOINT_D}/${remote}
        umount -lf ${UNBINDPOINT} >>/dev/null 2>&1
        UNBINDPOINT=${BINDPOINT_R}/${remote}
        umount -lf ${UNBINDPOINT} >>/dev/null 2>&1
        UNBINDPOINT=${BINDPOINT_W}/${remote}
        umount -lf ${UNBINDPOINT} >>/dev/null 2>&1
        UNBINDPOINT="$SD_BINDPOINT/$remote"
        umount -lf "$UNBINDPOINT" >>/dev/null 2>&1
    else
        USER_BINDPOINT=${SDBINDPOINT}
        UNBINDPOINT=${RUNTIME_D}/emulated/${PROFILE}/${USER_BINDPOINT}
        umount -lf ${UNBINDPOINT} >>/dev/null 2>&1
        UNBINDPOINT=${RUNTIME_R}/emulated/${PROFILE}/${USER_BINDPOINT}
        umount -lf ${UNBINDPOINT} >>/dev/null 2>&1
        UNBINDPOINT=${RUNTIME_W}/emulated/${PROFILE}/${USER_BINDPOINT}
        umount -lf ${UNBINDPOINT} >>/dev/null 2>&1
    fi
}

sd_binder() {
    if [[ -d ${RUNTIME_D} ]] && [[ ${BINDSD} = 1 ]]; then
        if [[ -z ${SDBINDPOINT} ]]; then
            mkdir -p ${DATA_MEDIA}/${PROFILE}/Cloud/${remote}
            chown media_rw:media_rw ${DATA_MEDIA}/${PROFILE}/Cloud/$remote

            BINDPOINT=${BINDPOINT_D}/${remote}

            mount --bind ${CLOUDROOTMOUNTPOINT}/${remote} ${BINDPOINT} >>/dev/null 2>&1

            BINDPOINT=${BINDPOINT_R}/${remote}

            if ! mount | grep -q ${BINDPOINT}; then
                mount --bind ${CLOUDROOTMOUNTPOINT}/${remote} ${BINDPOINT} >>/dev/null 2>&1
            fi

            BINDPOINT=${BINDPOINT_W}/${remote}

            if ! mount | grep -q ${BINDPOINT}; then
                mount --bind ${CLOUDROOTMOUNTPOINT}/${remote} ${BINDPOINT} >>/dev/null 2>&1
            fi

            BINDPOINT="$SD_BINDPOINT/$remote"

            if ! mount | grep -q "$BINDPOINT"; then
                mount --bind "$CLOUDROOTMOUNTPOINT/$remote" "$BINDPOINT" >>/dev/null 2>&1
            fi

            echo "[$remote] available at: -> [/sdcard/Cloud/${remote}] BINDPOINT=$BINDPOINT"
        else
            mkdir ${DATA_MEDIA}/${PROFILE}/${SDBINDPOINT} >>/dev/null 2>&1
            chown media_rw:media_rw ${DATA_MEDIA}/${PROFILE}/${SDBINDPOINT}

            USER_BINDPOINT=${SDBINDPOINT}
            BINDPOINT=${RUNTIME_D}/emulated/${PROFILE}/${USER_BINDPOINT}

            mount --bind ${CLOUDROOTMOUNTPOINT}/${remote} ${BINDPOINT} >>/dev/null 2>&1

            BINDPOINT=${RUNTIME_R}/emulated/${PROFILE}/${USER_BINDPOINT}

            if ! mount | grep -q ${BINDPOINT}; then
                mount --bind ${CLOUDROOTMOUNTPOINT}/${remote} ${BINDPOINT} >>/dev/null 2>&1
            fi

            BINDPOINT=${RUNTIME_W}/emulated/${PROFILE}/${USER_BINDPOINT}

            if ! mount | grep -q ${BINDPOINT}; then
                mount --bind ${CLOUDROOTMOUNTPOINT}/${remote} ${BINDPOINT} >>/dev/null 2>&1
            fi
            echo "[$remote] available at: -> [/storage/emulated/${PROFILE}/${SDBINDPOINT}]"
            unset BINDPOINT
        fi
    fi
}

syncd_service() {
    if [[ ! -z ${SDSYNCDIRS} ]]; then
        export PIDFILE=${MODDIR}/.tmp/${remote}-syncd.pids
        kill -9 $(cat ${PIDFILE}) >>/dev/null 2>&1
        rm ${PIDFILE} >>/dev/null 2>&1

        if [[ ! -d ${MODDIR}/.tmp ]]; then
            mkdir -p ${MODDIR}/.tmp
        fi

        export CLOUDROOTMOUNTPOINT
        export PROFILE
        export MODDIR
        export remote
        export SYNCWIFI
        export SYNC_BATTLVL
        export SYNC_CHARGE
        export NETCHK_ADDR

        IFS=$':'
        for SYNCDIR in ${SDSYNCDIRS[@]}; do
            export SYNCDIR
            ${MODDIR}/syncd.sh >>/dev/null 2>&1 &
        done
    fi

    unset IFS
    unset SDSYNCDIRS
    unset SYNCDIR
    SYNC_BATTLVL=0
    SYNC_WIFI=1
    SYNC_CHARGE=0
}

reset_params() {
    unset IFS
    unset SDBINDPOINT
    unset BINDSD
    unset ISOLATE
    unset RCLONE_PARAMS
    unset REPLACE_PARAMS
    unset ADD_PARAMS
    unset SYNCDIR
    unset SDSYNCDIRS
    unset PIDFILE
    unset SUBPATH
    LOGFILE=${USER_CONFDIR}/rclone.log
    LOGLEVEL=NOTICE
    CACHEMODE=off
    READCHUNKSIZE=1M
    CACHEMAXSIZE=1G
    CHUNKSIZE=1M
    CHUNKTOTAL=1G
    CACHEWORKERS=1
    CACHEINFOAGE=1h0m0s
    DIRCACHETIME=30m0s
    ATTRTIMEOUT=30s
    BUFFERSIZE=0
    READAHEAD=128k
    M_UID=0
    M_GID=1015
    DIRPERMS=0775
    FILEPERMS=0644
    UMASK=002
    PROFILE=0
    SYNC_WIFI=1
    SYNC_BATTLVL=0
    SYNC_CHARGE=0
}

rclone_mount() {
    if [[ ${READONLY} = 1 ]]; then
        READONLY=" --read-only "
    else
        READONLY=" "
    fi

    if [[ ${ADD_PARAMS} = 0 ]]; then
        unset ADD_PARAMS
    fi

    if [[ ${REPLACE_PARAMS} = 0 ]]; then
        unset REPLACE_PARAMS
    fi

    if [[ -z ${REPLACE_PARAMS} ]]; then
        RCLONE_PARAMS=" --log-file ${LOGFILE} --log-level ${LOGLEVEL} --vfs-cache-mode ${CACHEMODE} --cache-dir ${CACHE} --cache-chunk-path ${CACHE_BACKEND} --cache-db-path ${CACHE_BACKEND} --cache-tmp-upload-path ${CACHE} --vfs-read-chunk-size ${READCHUNKSIZE} --vfs-cache-max-size ${CACHEMAXSIZE} --cache-chunk-size ${CHUNKSIZE} --cache-chunk-total-size ${CHUNKTOTAL} --cache-workers ${CACHEWORKERS} --cache-info-age ${CACHEINFOAGE} --dir-cache-time ${DIRCACHETIME} --attr-timeout ${ATTRTIMEOUT} --cache-chunk-no-memory --use-mmap --buffer-size ${BUFFERSIZE} --max-read-ahead ${READAHEAD} --no-modtime --no-checksum --uid ${M_UID} --gid ${M_GID} --allow-other --dir-perms ${DIRPERMS} --file-perms ${FILEPERMS} --umask ${UMASK} ${READONLY} ${ADD_PARAMS} "
    elif [[ ! -z ${REPLACE_PARAMS} ]]; then
        RCLONE_PARAMS=" ${REPLACE_PARAMS} "
    fi

    if [[ -z ${ADD_PARAMS} ]]; then
        ADD_PARAMS=" "
    elif [[ ! -z ${ADD_PARAMS} ]]; then
        ADD_PARAMS=" ${ADD_PARAMS} "
    fi

    echo "[${remote}] available at: -> [${CLOUDROOTMOUNTPOINT}/${remote}]"
    mkdir -p ${CLOUDROOTMOUNTPOINT}/${remote}
    nice -n 19 ionice -c 2 -n 7 ${MODDIR}/rclone mount "${remote}:${SUBPATH}" ${CLOUDROOTMOUNTPOINT}/${remote} --config ${CONFIGFILE} ${RCLONE_PARAMS} --daemon >>/dev/null 2>&1 &
}

COUNT=0

if [[ ${INTERACTIVE} = 0 ]]; then
    until [[ $(getprop sys.boot_completed) = 1 ]] && [[ $(getprop dev.bootcomplete) = 1 ]] && [[ $(getprop init.svc.bootanim) = stopped ]] && [[ -e ${USER_CONF} ]] || [[ ${COUNT} -eq 240 ]]; do
        sleep 5
        ((++COUNT))
    done
fi

DECRYPT_CHK() {
    ls sdcard | grep -q -w "Android"
}

if [[ ${COUNT} -eq 240 ]] || [[ ! -d /sdcard/Android ]]; then
    exit 0
fi

if [[ ! -d ${USER_CONFDIR} ]]; then
    mkdir ${USER_CONFDIR}
fi

if [[ -e ${USER_CONFDIR}/.disable ]] && [[ ${INTERACTIVE} = 0 ]]; then
    exit 0
fi

if [[ ${INTERACTIVE} = 0 ]]; then
    export INTERACTIVE=1
    ${MODDIR}/service.sh
    exit
fi

global_params

if [ ! -d "$CLOUDROOTMOUNTPOINT" ]; then
    mkdir -p "$CLOUDROOTMOUNTPOINT"
    chown root:sdcard_rw "$CLOUDROOTMOUNTPOINT"
    touch "$CLOUDROOTMOUNTPOINT"/.nomedia
    chown root:sdcard_rw "$CLOUDROOTMOUNTPOINT"/.nomedia
    chmod 0775 "$CLOUDROOTMOUNTPOINT"/.nomedia
fi

if [ ! -f "$CLOUDROOTMOUNTPOINT/.nomedia" ]; then
    touch "$CLOUDROOTMOUNTPOINT"/.nomedia
    chown root:sdcard_rw "$CLOUDROOTMOUNTPOINT"/.nomedia
    chmod 0644 "$CLOUDROOTMOUNTPOINT"/.nomedia
fi

if [[ ! -d ${CACHE} ]]; then
    mkdir -p ${CACHE}
    chown root:sdcard_rw ${CACHE}
    chmod 0775 ${CACHE}
fi

if [[ -d ${CACHE} ]]; then
    chown root:sdcard_rw ${CACHE}
    chmod 0775 ${CACHE}
fi

if [[ ! -d ${CACHE_BACKEND} ]]; then
    mkdir -p ${CACHE_BACKEND}
fi

if [[ -d ${CACHE_BACKEND} ]]; then
    chown root:sdcard_rw ${CACHE_BACKEND}
    chmod 0775 ${CACHE_BACKEND}
fi

if [[ ! -L ${RUNTIME_R}/cloud ]]; then
    ln -sf ${CLOUDROOTMOUNTPOINT} ${RUNTIME_R}/cloud
fi

if [[ ! -L ${RUNTIME_W}/cloud ]]; then
    ln -sf ${CLOUDROOTMOUNTPOINT} ${RUNTIME_W}/cloud
fi

if [[ ! -L ${RUNTIME_D}/cloud ]]; then
    ln -sf ${CLOUDROOTMOUNTPOINT} ${RUNTIME_D}/cloud
fi

if [[ -e ${USER_CONF} ]]; then
    cp ${USER_CONF} ${CONFIGFILE}
    chmod 0600 ${CONFIGFILE}
fi

if [[ ${NETCHK} = 1 ]]; then
    until net_chk || [[ ${COUNT} = 60 ]]; do
        sleep 5
        ((++COUNT))
    done >>/dev/null 2>&1
fi

echo "Default CACHEMODE ${CACHEMODE}"
sleep 5

LD_LIBRARY_PATH=${MODDIR} ${MODDIR}/rclone listremotes --config ${CONFIGFILE} | cut -f1 -d: |
    while read remote; do
        echo
        list_remote=${remote}
        CLOUDROOTMOUNTPOINT=/mnt/cloud
        PROFILE=0
        DISABLE=0
        READONLY=0
        global_params >>/dev/null 2>&1
        remote=${list_remote}
        custom_params
        if [[ ${ISOLATE} = 1 ]] && [[ ${PROFILE} -gt 0 ]] && [[ ${BINDSD} = 1 ]]; then
            CLOUDROOTMOUNTPOINT=/data/media/${PROFILE}/.cloud
        fi

        if [[ ${DISABLE} = 1 ]] || [[ -e ${USER_CONFDIR}/.${remote}.disable ]]; then
            echo "${remote} disabled by user"
            continue
        fi
        sd_unbind
        rclone_mount
        sd_binder
        syncd_service
        reset_params
    done
echo

if [[ ${HTTP} = 1 ]]; then
    if (${MODDIR}/rclone serve http ${CLOUDROOTMOUNTPOINT} --addr ${HTTP_ADDR} --no-checksum --no-modtime --read-only >>/dev/null 2>&1 &) then
        echo "HTTP Server: http://${HTTP_ADDR}"
    fi
fi

if [[ ${FTP} = 1 ]]; then
    if (${MODDIR}/rclone serve ftp ${CLOUDROOTMOUNTPOINT} --addr ${FTP_ADDR} --no-checksum --no-modtime --read-only >>/dev/null 2>&1 &) then
        echo "FTP Server: ftp://${FTP_ADDR}"
    fi
fi

if [[ ${SFTP} = 1 ]] && [[ ! -z ${SFTP_USER} ]] && [[ ! -z ${SFTP_PASS} ]]; then
    if (${MODDIR}/rclone serve sftp ${CLOUDROOTMOUNTPOINT} --addr ${SFTP_ADDR} --user ${SFTP_USER} --pass ${SFTP_PASS} --no-checksum --no-modtime --read-only >>/dev/null 2>&1 &) then
        echo "SFTP Server: sftp://${SFTP_ADDR}"
    fi
fi

exit