Thank you for your interest in the Jaccuracy Scope Project! There is a donation page link to the right if you support this project Buy Me A Coffee Page.
The First Video Overview of the project: Video Introduction Hackaday Article: Hackaday Element-14 Article: Element-14
Seems that installing this on Pi 4B with Rasbian Bullseye(64-bit) is the best option for FPS speed. Please bulid this with the Pi 4B option, further developement is needed for good FPS with the new Pi 5 (the SPI bus is slower). So please avoid the Pi5 and Bookworm for this project...
At the time of writing this, I have hope for the community of long range shooting enthusiasts to develop this further as my time to dedicate here has run short. I hope for the following features in the evolution of this project:
- Inclusion of Coriolis and Eotvos Effects with Coordinate input in the settings.
- Internal IMU Calibration for the Accelerometer, Magnetometer and Gyroscope
- A build using an HDMI small screen for compact builds, Raspberry Pi 5 capability, and support faster frame rate and features.
- A Low Power mode where the ballistic calculations and screen will turn to a slow frame rate to save power consumption wildly.
- A Separate Menu option for Atmospheric conditions during the time of Zeroing the rifle
- Inclusion of Scope Height Adjustment (right now its assumed to be 1.75 inches, but can be edited in the BallisticThreader4Prin….. files , edit the ‘self.scope_height = 1.75’ line for your rifle. For now. -A physical build kit inlcuding a harness for easy building! (I don’t even know how to start with that…).
