Skip to content

community_test

Github Action edited this page Oct 1, 2024 · 4 revisions

RT-7.2: BGP Policy Community Set

Summary

BGP policy configuration for Community Sets

Subtests

  • RT-7.2.1 - Setup BGP sessions

    • Generate config for 2 DUT ports, with DUT port 1 eBGP session to ATE port 1.

    • Generate config for ATE 2 ports, with ATE port 1 eBGP session to DUT port 1.

    • Configure ATE port 1 to advertise ipv4 and ipv6 prefixes to DUT port 1 using the following communities:

      • prefix-set-1 with 2 routes with communities [100:1, 200:2, 300:3]
      • prefix-set-2 with 2 routes with communities [100:1, 101:1, 200:1]
      • prefix-set-3 with 2 routes with communities [109:1]
      • prefix-set-4 with 2 routes with communities [400:1]
    • For IPv4 and IPv6 prefixes:

      • Observe received prefixes at ATE port-2.
    • Generate traffic from ATE port-2 to ATE port-1.

    • Validate that traffic can be received on ATE port-1 for all installed routes.

  • RT-7.2.2 - Validate community-set

    • Configure the following community sets on the DUT.

      • Create a community-set named any_my_3_comms with members as follows:
        • { community-member = [ "100:1", "200:2", "300:3" ] }
      • Create a community-set named all_3_comms with members and match options as follows:
        • { community-member = [ "100:1", "200:2", "300:3" ] }
      • Create a community-set named no_3_comms with members and match options as follows:
        • { community-member = [ "100:1", "200:2", "300:3" ]}
      • Create a community-set named any_my_regex_comms with members and match options as follows:
        • { community-member = [ "10[0-9]:1" ] }
    • Create a policy-definition named 'community-match' with the following statements

      • statement[name='accept_any_3_comms']/
        • conditions/bgp-conditions/match-community-set/config/community-set = 'any_my_3_comms'
        • conditions/bgp-conditions/match-community-set/config/match-set-options = ANY
        • actions/config/policy-result = ACCEPT_ROUTE
      • statement[name='accept_all_3_comms']/
        • conditions/bgp-conditions/match-community-set/config/community-set = 'all_3_comms'
        • conditions/bgp-conditions/match-community-set/config/match-set-options = ALL
        • actions/config/policy-result = ACCEPT_ROUTE
      • statement[name='accept_no_3_comms']/
        • conditions/bgp-conditions/match-community-set/config/community-set = 'no_3_comms'
        • conditions/bgp-conditions/match-community-set/config/match-set-options = INVERT
        • actions/config/policy-result = ACCEPT_ROUTE
      • statement[name='accept_any_my_regex_comms']/
        • conditions/bgp-conditions/match-community-set/config/community-set = 'all_3_comms'
        • conditions/bgp-conditions/match-community-set/config/match-set-options = ANY
        • actions/config/policy-result = ACCEPT_ROUTE
    • Send traffic from ATE port-2 to all prefix-sets.

      • Verify traffic is received on ATE port 1 for accepted prefixes.
      • Verify traffic is not received on ATE port 1 for rejected prefixes.
  • RT-7.2.3 - Update community set and validate

    1. Configure a community-set named update_comm_set with "100:1" as member.

    2. Create a policy-definition named 'community-match' with the following statements

    • statement[name='accept_update_comm_set']/
      • conditions/bgp-conditions/match-community-set/config/community-set = 'update_comm_set'
      • conditions/bgp-conditions/match-community-set/config/match-set-options = INVERT
      • actions/config/policy-result = ACCEPT_ROUTE
    1. Send traffic from ATE port-2 to all prefix-sets.
    • Verify traffic is received on ATE port 1 for accepted prefixes for all community set except "100:1".
    • Verify traffic is not received on ATE port 1 for rejected prefixes for community set "100:1".
    1. Update the community-set named update_comm_set with "200:2" as member.

    2. Send traffic from ATE port-2 to all prefix-sets.

    • Verify traffic is received on ATE port 1 for accepted prefixes for all community set except "200:1".
    • Verify traffic is not received on ATE port 1 for rejected prefixes for community set "200:1".

Expected community matches

prefix-set any_my_3_comms all_3_comms no_3_comms any_my_regex_comms
prefix-set-1 accept accept reject accept
prefix-set-2 accept reject reject accept
prefix-set-3 reject reject accept accept
prefix-set-4 reject reject accept reject

Config Parameter Coverage

Policy definition

  • /routing-policy/policy-definitions/policy-definition/config/name
  • /routing-policy/policy-definitions/policy-definition/statements/statement/config/name

Policy for community-set match

  • /routing-policy/defined-sets/bgp-defined-sets/community-sets/community-set/config/community-set-name
  • /routing-policy/defined-sets/bgp-defined-sets/community-sets/community-set/config/community-member
  • /routing-policy/defined-sets/bgp-defined-sets/community-sets/community-set/config/match-set-options
  • /routing-policy/policy-definitions/policy-definition/statements/statement/conditions/bgp-conditions/match-community-set/config/community-set
  • /routing-policy/policy-definitions/policy-definition/statements/statement/conditions/bgp-conditions/match-community-set/config/match-set-options
  • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
  • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/ import-policy

Telemetry Parameter Coverage

Policy definition state

  • /routing-policy/policy-definitions/policy-definition/state/name
  • /routing-policy/policy-definitions/policy-definition/statements/statement/state/name

Policy for community-set match state

  • /routing-policy/defined-sets/bgp-defined-sets/community-sets/community-set/state/community-set-name
  • /routing-policy/defined-sets/bgp-defined-sets/community-sets/community-set/state/community-member
  • /routing-policy/defined-sets/bgp-defined-sets/community-sets/community-set/state/match-set-options
  • /routing-policy/policy-definitions/policy-definition/statements/statement/conditions/bgp-conditions/state/community-set

Paths to verify policy state

  • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
  • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy

Paths to verify prefixes sent and received

  • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/state/prefixes/sent
  • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/state/prefixes/received-pre-policy
  • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/state/prefixes/received
  • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/state/prefixes/installed

OpenConfig Path and RPC Coverage

The below yaml defines the OC paths intended to be covered by this test. OC paths used for test setup are not listed here.

paths:
  ## Config paths
  ### Policy definition
  /routing-policy/policy-definitions/policy-definition/config/name:
  /routing-policy/policy-definitions/policy-definition/statements/statement/config/name:
  ### Policy for community-set match
  /routing-policy/defined-sets/bgp-defined-sets/community-sets/community-set/config/community-set-name:
  /routing-policy/defined-sets/bgp-defined-sets/community-sets/community-set/config/community-member:
  /routing-policy/defined-sets/bgp-defined-sets/community-sets/community-set/config/match-set-options:
  /routing-policy/policy-definitions/policy-definition/statements/statement/conditions/bgp-conditions/match-community-set/config/community-set:
  /routing-policy/policy-definitions/policy-definition/statements/statement/conditions/bgp-conditions/match-community-set/config/match-set-options:
  /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result:
  /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy:

  ## State paths
  ### Policy definition state

  /routing-policy/policy-definitions/policy-definition/state/name:
  /routing-policy/policy-definitions/policy-definition/statements/statement/state/name:

  ### Policy for community-set match state

  /routing-policy/defined-sets/bgp-defined-sets/community-sets/community-set/state/community-set-name:
  /routing-policy/defined-sets/bgp-defined-sets/community-sets/community-set/state/community-member:
  /routing-policy/defined-sets/bgp-defined-sets/community-sets/community-set/state/match-set-options:
  /routing-policy/policy-definitions/policy-definition/statements/statement/conditions/bgp-conditions/state/community-set:

  ### Paths to verify policy state

  /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy:
  /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy:

  ### Paths to verify prefixes sent and received

  /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/state/prefixes/sent:
  /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/state/prefixes/received-pre-policy:
  /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/state/prefixes/received:
  /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/state/prefixes/installed:
rpcs:
  gnmi:
    gNMI.Set:
    gNMI.Subscribe:
Clone this wiki locally