QT-2host v1.5

Updated firmware for QT-2host.

Bugfix:

• fixed data getting stuck in usb read buffer which would present as note-on/note-off sending in the wrong order.

How to Update:

Double tap the QTPy reset button. This will enter bootloader mode and the QTPy LED should turn green. A QTPY_BOOT drive will appear on your computer (as would a USB disk drive or other Removable Storage).

Drag and drop the firmware UF2 file onto the QTPY_BOOT drive. When the copy is complete the drive will automatically dismount and restart running the QT-2host code.

Do this step for BOTH QTPy's on your QT-2host.

Note: when the bootloader is active, it will change the color of the onboard LED to indicate the connection status, red for disconnected and green for connected. If the board is plugged in but still showing that its disconnected, try a different USB cable. Some cables only provide power with no communication.

2host Firmware 1.0 - Teensy

add hex