Skip to content

Latest commit

 

History

History
46 lines (27 loc) · 1.57 KB

box_disassembly.md

File metadata and controls

46 lines (27 loc) · 1.57 KB

Disassembling the H96 MAX V58

DISCLAIMER: You may brick/damage your box, do only if you know what you're doing and at your own risk

This box is fairly easy to disassemble, as there are only 4 screws hidden under a easily removable bottom cover. We can open the whole thing in less than 5 minutes and without destroying anything in the process.

Step by step Procedure

Removing the bottom cover

Using a thin plastic card just go around the border where the white plastic meets the black bottom and lift carefully. It's probably easier to start near the feet indentations.

Bottom white Cover

Removing the white bottom cover

Just remove the screws and lift it.

Bottom Cover

Removing the black plate

Just lift it with the plastic card, it's not fixed by anything other than the screws.

Bottom Plate

Removing the board from the case

Pick it by the LCD and lift carefully, it should come off easily. The LCD is the white thing in the photo bellow.

Board bottom

The Board Features

Board top

  • The 4 pin debug port is available
    • You can see it at the bottom left in the photo above
  • The GPIO is not exposed
  • The cooling is passive
    • The stock cooler uses tape
      • we might be able to replace the stock cooler with a larger one for less thermal throttling
    • There might be a way to get a small blower in there
      • Where can we get power?