Thermostats #136
-
|
Hi, didn’t want to raise an issue as it seemed a little formal - do I understand correctly from the description of the plug in that you don’t current support pulling thermostat devices from smart life to homebridge? |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 7 replies
-
|
Hey; The "latest" release does indeed not support this. There is however a newer release (0.5.2, latest is 0.4.8) that does start to add support for them. See also #63 |
Beta Was this translation helpful? Give feedback.
-
|
Hey @sgruzlewski, As of 4 days ago, they are supported! A donation is always welcome but never required, if you wish to donate there are a few links on the readme page. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I'm using 0.7. It let's me set the temperature but when I close and reopen apple home app it shows "set to (min temp)" where min tem is the value I set in config as minimal temperature. All is fine if I leave the app running in the background but for example I set temp to 20C, it updates and shows correctly, when i kill the home app and reopen it - it shows me "set to 10C" |
Beta Was this translation helpful? Give feedback.
-
|
Did you manage to find the configuration for these devices? Playing with the min-, max- temperatures as well as the temperature factors should probably help you! It sounds an awful lot like either your minimal temperature is not set low enough (this would be the case if your actual temperature is below 10 degrees) or that tuya messes up how it reports your temperature. Would you mind following the steps under Supported Device Types in the documentation and post the output? That way I can probably see what is going on 😉 Or at least we can work from there! |
Beta Was this translation helpful? Give feedback.
-
|
So my devices extracted with that python script I have my temperature factor set to 0.1, min is 5, max is 30. If I set my target temp factor to 0.1 sometimes I get that "set temp to 5" {
"header":{
"code":"SUCCESS",
"payloadVersion":1
},
"payload":{
"devices":[
{
"data":{
"current_temperature":205,
"max_temper":700,
"min_temper":10,
"online":True,
"temperature":200
},
"dev_type":"climate",
"ha_type":"climate",
"icon":"https://images.tuyaeu.com/smart/program_category_icon/wk.png",
"id":"bf8669761d0e2c1e7df6mc",
"name":"Kuchnia"
},
{
"data":{
"current_temperature":215,
"max_temper":700,
"min_temper":10,
"online":True,
"temperature":220
},
"dev_type":"climate",
"ha_type":"climate",
"icon":"https://images.tuyaeu.com/smart/program_category_icon/wk.png",
"id":"bfe00ef9867413b1e2zxnd",
"name":"Sypialnia"
},
{
"data":{
"current_temperature":225,
"max_temper":700,
"min_temper":10,
"online":True,
"temperature":220
},
"dev_type":"climate",
"ha_type":"climate",
"icon":"https://images.tuyaeu.com/smart/program_category_icon/wk.png",
"id":"bf559fec6f868b67cavp9c",
"name":"Salon"
},
{
"data":{
"current_temperature":225,
"max_temper":700,
"min_temper":10,
"online":True,
"temperature":220
},
"dev_type":"climate",
"ha_type":"climate",
"icon":"https://images.tuyaeu.com/smart/program_category_icon/wk.png",
"id":"bfec60472454240230c5ec",
"name":"Łazienka"
},
{
"data":{
"current_temperature":215,
"max_temper":700,
"min_temper":10,
"online":True,
"temperature":220
},
"dev_type":"climate",
"ha_type":"climate",
"icon":"https://images.tuyaeu.com/smart/program_category_icon/wk.png",
"id":"bf8ee6cd43bc9d5b653tkw",
"name":"Pieczara"
}
],
"scenes":[
]
}
}My log when the issue occurred. In this case I had target temp set to 0.1 I see that it updated to 2.3000000000000003 but if i would change this to 1 or even 10 the problem happens in the other way around - set temp to (max_temp) instead of (min_temp). I even tried to change app from smartlife to tuya but no effect - behaves in the same way.
|
Beta Was this translation helpful? Give feedback.
-
|
Hmm that makes no sense 😝 {
"current_temperature":225,
"max_temper":700,
"min_temper":10,
"online":True,
"temperature":220
}This data is what Tuya sends to the plugin. Could you please open an issue for this? |
Beta Was this translation helpful? Give feedback.
Hey;
The "latest" release does indeed not support this.
There is however a newer release (0.5.2, latest is 0.4.8) that does start to add support for them.
See also #63