Skip to content
This repository has been archived by the owner on Sep 27, 2024. It is now read-only.
/ halcs Public archive

Hardware Abstraction Layer for Control Systems

License

GPL-3.0, Unknown licenses found

Licenses found

GPL-3.0
LICENSE
Unknown
LICENSE.packpack
Notifications You must be signed in to change notification settings

lnls-dig/halcs

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Hardware Abstraction Layer for Control Systems

Build Status Latest tag Latest release GPL License 3.0 Quality Gate Technical debt ratio

Software for creating controlling daemons for devices

Documentation

https://lnls-dig.github.io/halcs

Prerequisites

Make sure you have the following libraries installed, either by download the binaries or executing the instructions below:

Optional libraries

  • uuid (distribution available):
sudo apt-get install uuid

Prerequisites Installation Instructions

git clone --branch=1.0.8 https://github.com/jedisct1/libsodium.git && \
git clone --branch=v4.2.5 https://github.com/zeromq/libzmq.git && \
git clone --branch=v4.0.2 https://github.com/zeromq/czmq.git && \
for project in libsodium libzmq czmq; do

    CONFIG_OPTS=()
    CONFIG_OPTS+=("CFLAGS=-Wno-format-truncation")
    CONFIG_OPTS+=("CPPFLAGS=-Wno-format-truncation")
    if [ $project == "libzmq" ]; then
        CONFIG_OPTS+=("PKG_CONFIG_PATH=/usr/local/lib/pkgconfig --with-libsodium")
    fi

    cd $project && \
    ./autogen.sh && \
    ./configure "${CONFIG_OPTS[@]}" && \
    make check && \
    make && \
    sudo make install && \
    sudo ldconfig && \
    cd ..

    # Check last command return status
    if [ $? -ne 0 ]; then
        echo "Could not compile/install project $project." >&2
        exit 1
    fi
done

git clone --branch=v1.6.1 https://github.com/lnls-dig/malamute.git && \
for project in malamute; do

    CONFIG_OPTS=()
    CONFIG_OPTS+=("--with-systemd-units")
    CONFIG_OPTS+=("--sysconfdir=/usr/etc")
    CONFIG_OPTS+=("--prefix=/usr")
    CONFIG_OPTS+=("CFLAGS=-Wno-format-truncation")
    CONFIG_OPTS+=("CPPFLAGS=-Wno-format-truncation")

    cd $project && \
    ./autogen.sh && \
    ./configure "${CONFIG_OPTS[@]}" && \
    make check && \
    make && \
    sudo make install && \
    sudo ldconfig && \
    cd ..

    MALAMUTE_VERBOSE=0
    MALAMUTE_PLAIN_AUTH=
    MALAMUTE_AUTH_MECHANISM=null
    MALAMUTE_ENDPOINT='ipc:///tmp/malamute'
    MALAMUTE_CFG_FILE=/usr/etc/malamute/malamute.cfg
    # Install our custom Malamute config file
    sudo sed -i \
        -e "s|verbose\( *\)=.*|verbose\1= ${MALAMUTE_VERBOSE}|g" \
        -e "s|plain\( *\)=.*|plain\1= ${MALAMUTE_PLAIN_AUTH}|g" \
        -e "s|mechanism\( *\)=.*|mechanism\1= ${MALAMUTE_AUTH_MECHANISM}|g" \
        -e "s|tcp://\*:9999|${MALAMUTE_ENDPOINT}|g" \
        ${MALAMUTE_CFG_FILE}


    # Enable service
    sudo systemctl enable malamute || /bin/true

    # Check last command return status
    if [ $? -ne 0 ]; then
        echo "Could not compile/install project $project." >&2
        echo "Try executing the script with root access." >&2
        exit 1
    fi
done

Cloning this repository

git clone --recursive https://github.com/lnls-dig/halcs.git

Installation Instructions

Server

To install the server-side you'll need libsodium, zeromq, czmq and mlm. Check the documentation or the previous section for details.

Currently we support 2 build systems: Make and CMake. The recommended approach is to use CMake.

CMake

To use CMake do the following steps:

mkdir -p build
cd build
cmake ../
make
sudo make install

HALCS CMake scripts also supports CPack. So you can easilly generated .deb or .rpm packages for your distribution with:

For Debian-based distros:

mkdir -p build
cd build
cmake ../
cpack -G "DEB"

For Redhat-based distros:

mkdir -p build
cd build
cmake ../
cpack -G "RPM"

Make

To use Make do the following steps:

make
sudo make install

Alternatively, you can use the compile.sh script that wraps the make options into command-line options:

./compile.sh [-b <board>] [-a <applications>] [-e <with examples = yes/no>] \
    [-l <with library linking = yes/no>] [-d <with driver = yes/no>] [-x <extra flags>]

Client

To install the server-side you'll need libsodium, zeromq and czmq. Check the documentation or the previous section for details.

CMake

To use CMake do the following steps:

TOP=$(pwd)
for lib in \
    errhand \
    convc \
    hutils \
    disptable \
    llio \
    halcsclient \
    acqclient \
    bpmclient \
    sdbfs \
    sdbutils; do

    (
        cd ${TOP}/libs/${lib} && \
        mkdir -p build && \
        cd build && \
        cmake ../ && \
        make && \
        sudo make install
    )
done

If you need to uninstall the libraries do:

TOP=$(pwd)
for lib in \
    sdbutils \
    sdbfs \
    bpmclient \
    acqclient \
    halcsclient \
    llio \
    disptable \
    hutils \
    convc \
    errhand; do

    (
        cd ${TOP}/libs/${lib} && \
        mkdir -p build && \
        cd build && \
        cmake ../ && \
        sudo make uninstall
    )
done

Make

To use Make do the following steps:

Install the inner dependencies:

make deps
sudo make deps_install

And, then the client libraries themselves:

make libs
sudo make libs_install

If you need to uninstall the libraries do:

sudo make libs_uninstall

Examples

Compilation Instructions

Change to the examples folder

cd examples

CMake

Compile the examples using CMake (recommended):

mkdir -p build
cd build
cmake ../
make

Make

if needed, compile the examples with Make:

make

Running the examples

Run an example application, for instance, the leds example

./leds -v -b <broker_endpoint> -board <board_number> -halcs <halcs_number>

Typically, one should choose the IPC transport method for its faster than TCP. For instance:

./leds -v -b ipc:///tmp/halcs -board <board_number> -halcs <halcs_number>

If one would like to use TCP, it should call, for instance:

./leds -v -b tcp://127.0.0.1:8888 -board <board_number> -halcs <halcs_number>

Leds should be blinking in the FMC ADC board

Additional PCIe driver instructions

Installation instructions (if not installed with the main application)

Install linux header files

sudo apt-get install linux-headers-generic

Install the GIT package

sudo apt-get install binutils gcc

Change folder to the pcie driver location

cd kernel

Compile the PCIe driver and its tests

make

Install the PCIe drivers and libraries

sudo make install

Load the Driver module

sudo insmod /lib/modules/$(uname -r)/extra/PciDriver.ko

After this the kernel should have found the FPGA board and initialized it. Run the following command and check its output

dmesg | tail

You should see something like the excerpt below:

[267002.495109] pciDriver - pcidriver_init :
	Major 250 allocated to nodename 'fpga'
[267002.495130] pciDriver - pcidriver_probe :
	Found ML605 board at 0000:01:00.0
[267002.495224] pciDriver - pcidriver_probe :
	Device /dev/fpga0 added
[267002.495434] pciDriver - pcidriver_probe_irq :
	Registered Interrupt Handler at pin 1, line 11, IRQ 16
[267002.495450] pciDriver - pcidriver_init :
	Module loaded

Running the PCIe self-test

After the installation of the PCIe driver (see above) it is possible to run a self test to check if everything is setup properly. For this run the following:

Change to the "compiled tests folder"

cd tests/pcie/bin

Run the test entitled "testPciDriverMod"

sudo ./testPciDriverMod

You should get an output like the following, if everythig is ok:

Testing OPEN DEVICE... PASSED!
 Testing PCIDRIVER_IOC_MMAP_MODE... PASSED!
 Testing PCIDRIVER_IOC_MMAP_AREA... PASSED!
 Testing PCIDRIVER_IOC_PCI_INFO...  PASSED!
 Testing PCI CONFIG...
   Reading PCI config area in byte mode ... PASSED!
   Reading PCI config area in word mode ... PASSED!
   Reading PCI config area in double-word mode ... PASSED!
 Testing PCI mmap...
   Reading PCI info... PASSED!
   Setting mmap mode... PASSED!
   Setting mmap area... PASSED!
   MMAP'ing BAR0... PASSED!
   Setting mmap area... PASSED!
   MMAP'ing BAR2... PASSED!
   Setting mmap area... PASSED!
   MMAP'ing BAR4... PASSED!
 Testing PCIDRIVER_IOC_KMEM_ALLOC...
   alloc size    1024 :  PASSED!
   alloc size    2048 :  PASSED!
   alloc size    4096 :  PASSED!
   alloc size    8192 :  PASSED!
   alloc size   16384 :  PASSED!
   alloc size   32768 :  PASSED!
   alloc size   65536 :  PASSED!
   alloc size  131072 :  PASSED!
   alloc size  262144 :  PASSED!
   alloc size  524288 :  PASSED!
   alloc size 1048576 :  PASSED!
   alloc size 2097152 :  PASSED!
   alloc size 4194304 :  PASSED!
   alloc size 8388608 :  FAILED (maybe size is just too big)!
 Testing PCIDRIVER_IOC_KMEM_SYNC...
   Setting KMEM SYNC to write mode... PASSED!
   Setting KMEM SYNC to read mode... PASSED!
   Setting KMEM SYNC to read/write mode... PASSED!
 Testing PCIDRIVER_IOC_KMEM_FREE... PASSED!
 Testing Kernel Buffer mmap...
   Setting MMAP mode to KMEM... PASSED!
     Allocing size    1024 : PASSED!
     MMAPing size     1024 : PASSED!
     Allocing size    2048 : PASSED!
     MMAPing size     2048 : PASSED!
     Allocing size    4096 : PASSED!
     MMAPing size     4096 : PASSED!
     Allocing size    8192 : PASSED!
     MMAPing size     8192 : PASSED!
     Allocing size   16384 : PASSED!
     MMAPing size    16384 : PASSED!
     Allocing size   32768 : PASSED!
     MMAPing size    32768 : PASSED!
     Allocing size   65536 : PASSED!
     MMAPing size    65536 : PASSED!
     Allocing size  131072 : PASSED!
     MMAPing size   131072 : PASSED!
     Allocing size  262144 : PASSED!
     MMAPing size   262144 : PASSED!
     Allocing size  524288 : PASSED!
     MMAPing size   524288 : PASSED!
     Allocing size 1048576 : PASSED!
     MMAPing size  1048576 : PASSED!
     Allocing size 2097152 : PASSED!
     MMAPing size  2097152 : PASSED!
     Allocing size 4194304 : PASSED!
     MMAPing size  4194304 : PASSED!
     Allocing size 8388608 : FAILED (maybe size is just too big)!
   Freeing Kernel buffers...
      Buffer index 0... PASSED!
      Buffer index 1... PASSED!
      Buffer index 2... PASSED!
      Buffer index 3... PASSED!
      Buffer index 4... PASSED!
      Buffer index 5... PASSED!
      Buffer index 6... PASSED!
      Buffer index 7... PASSED!
      Buffer index 8... PASSED!
      Buffer index 9... PASSED!
      Buffer index 10... PASSED!
      Buffer index 11... PASSED!
      Buffer index 12... PASSED!
 Testing PCIDRIVER_IOC_UMEM_SGMAP ... PASSED!
 Testing PCIDRIVER_IOC_UMEM_SGGET ... PASSED!
 Testing PCIDRIVER_IOC_UMEM_SYNC ...
   Setting UMEM SYNC to write mode... PASSED!
   Setting UMEM SYNC to read mode... PASSED!
   Setting UMEM SYNC to read/write mode... PASSED!
 Testing PCIDRIVER_IOC_UMEM_SGUNMAP ... PASSED!

-------------------------------------
|        All tests PASSED!          |
-------------------------------------

Notice that some tests that try to evaluate the limits of a current Linux Kernel may fail in some cases. In the example above, two tests , due to an attempt to allocate a large buffer in kernel space.

This is not actually an error or a failure, it is just trying to allocate more memory than the kernel has available.