ran ./upgrade.sh how to switch to tedapi

[anderep]

ok i ran upgrade, kind of expected it to prompt for setup dialog but it didn't. what files to i need to edit to switch to tedapi?

i'm logged into gateway with second wifi adapter and have access to 192.168.91.1.

do i want configuration mode 1 [Local Access (Powerwall 1, 2, or + using the Tesla Gateway on LAN) - Default] or 4 [4 - Powerwall 3 (Powerwall 3 using the local Tesla Gateway)]????

[jasonacox]

Upgrade doesn't change your setup, it just upgrades the software.

Run setup.sh and select 4 - Powerwall 3 and it will force it to only use TEDAPI. The option 1 will attempt both and will use both. I'm thinking about removing that to make it easier for people.

[anderep]

found this:
#392 (comment)

[anderep]

./setup.sh ... got to the section "current credentials:" do i want to "update these credentials"???
I'm assuming yes and edit PW_HOST to 192.168.91.1
anything else?

[jasonacox]

Yes, you will need to update credentials. You're doing fine! You can do this.

[jasonacox]

Powerwall Dashboard (v4.6.0) - SETUP
-----------------------------------------
Select configuration mode:

Current: Local Access

 1 - Local Access   (Powerwall 1, 2, or + using the Tesla Gateway on LAN) - Default
 2 - Tesla Cloud    (Solar-only systems or Powerwalls without LAN access)
 3 - FleetAPI Cloud (Powerwall systems using Official Telsa API)
 4 - Powerwall 3    (Powerwall 3 using the local Tesla Gateway)

Select mode: [1] 4

Timezone (leave blank for America/Los_Angeles)
Enter Timezone: 

Current Credentials:

PW_EMAIL=
PW_PASSWORD=
PW_HOST=192.168.91.1
PW_TIMEZONE=America/Los_Angeles
TZ=America/Los_Angeles
PW_DEBUG=no
PW_STYLE=grafana-dark
PW_GW_PWD=XXXXXXXXXX

Update these credentials? [y/N] y

Setting credentials for Powerwall 3...
Found Powerwall Gateway at 192.168.91.1
Use this IP? [Y/n] y

Congratulations!
Extended Device Metrics (vitals) are available on this endpoint via TEDAPI.
However, you will need the Gateway password to access them.
This password is often found on a QR code on the Powerwall.

Enter Gateway Password or leave blank to disable: XXXXXXXXXX   

[anderep]

ok it prompted ..91.1
is my password the same. it works when logging in thru browser to 192.168.92.1
also, weather do i need to setup weather data? it was setup before. can i say no and it wll be as before???

[jasonacox]

That gateway password is the one for the WiFi access point, not the portal login (browser). It is often on the QR sticker on the gateway or, if you have PW3's, on the Powerwall itself.

You can say no to weather. It will not change your current setup.

[anderep]

`Waiting for InfluxDB to start...
up!
Setup InfluxDB Data...
2025/02/01 18:36:08 error: continuous query already exists
Fetching local weather...
weather411
------------------[ Final Setup Instructions ]-----------------

Open Grafana at http://localhost:9000/ ... use admin/admin for login.

To complete Grafana Setup:

• From 'Dashboard\Browse', select 'New/Import', browse to /home/eric/Powerwall-Dashboard/dashboards
  and upload 'dashboard.json'.

NOTE: The datasources for InfluxDB and SunAndMoon are already configured.
If you need to modify them via Configuration\Data Sources:

• InfluxDB

  • URL: 'http://influxdb:8086'
  • Database: 'powerwall'
  • Min time interval: '5s'
  • Click "Save & test" button

• Sun and Moon

  • Enter your latitude and longitude (tool here: https://bit.ly/3wYNaI1 )
  • Click "Save & test" button
    `

got error "error: continuous query already exists" i assume ignore.

do i need to setup my dashboard again? my old dashboard isn't working. perhaps i need to reboot?

[jasonacox]

got error "error: continuous query already exists" i assume ignore.

Yes, this is setup ensuring the CQ's are in place. I debated over masking them but it would also mask any real errors.

do i need to setup my dashboard again? my old dashboard isn't working. perhaps i need to reboot?

Importing the dashboard.json is optional if you already have one.

[anderep]

OK, powerflow is back. any hope to mining data from nerrio's again???

[anderep]

my enphase power is back!!! but tesla power isn't...

[jasonacox]

OK, powerflow is back. any hope to mining data from nerrio's again???

I don't know what this would be. It looks like you have a custom dashboard. How were you pulling this data before?

You can see the data that is being pulled from TEDAPI here (replace pypowerwall with the host running your dashboard):

	"http://pypowerwall:8675/aggregates",
	"http://pypowerwall:8675/soe",
	"http://pypowerwall:8675/strings",
	"http://pypowerwall:8675/temps/pw",
	"http://pypowerwall:8675/freq",
	"http://pypowerwall:8675/pod"
	"http://pypowerwall:8675/alerts/pw"

And the raw data from TEDAPI that creates the above is here:

	http://pypowerwall:8675/tedapi/status
	http://pypowerwall:8675/tedapi/config
	http://pypowerwall:8675/tedapi/components

[anderep]

i see the neurio data in tedapi/status:

      {
        "dataRead": [
          {
            "currentA": 0.180000007152557,
            "reactivePowerVAR": 21.2900009155273,
            "realPowerW": -2.26999998092651,
            "voltageV": 125.709999084473
          },
          {
            "currentA": 0.00999999977648258,
            "reactivePowerVAR": -0.0599999986588955,
            "realPowerW": -0.0599999986588955,
            "voltageV": 126.330001831055
          },
          {
            "currentA": 0.00999999977648258,
            "reactivePowerVAR": -0.0299999993294477,
            "realPowerW": -0.0500000007450581,
            "voltageV": 126.370002746582
          },
          {
            "currentA": 5.1100001335144,
            "reactivePowerVAR": 635.320007324219,
            "realPowerW": -1.17999994754791,
            "voltageV": 125.709999084473
          }
        ],
        "serial": "VAH4635AB1496",
        "timestamp": "2025-02-01T18:54:40-06:00"
      }
    ]
  },

was when it was work before, from my old thread #254:

"NEURIO--VAH4635AB1496": {
        "NEURIO_CT0_InstRealPower": 2373.679931640625,
        "NEURIO_CT0_Location": "solar",
        "NEURIO_CT3_InstRealPower": 11851.8203125,
        "NEURIO_CT3_Location": "solar",
        "componentParentDin": "STSTSM--1232100-00-H--GF22227000014F",
        "firmwareVersion": "1.7.2-Tesla",
        "lastCommunicationTime": 1682369955,
        "manufacturer": "NEURIO",
        "meterAttributes": {
            "meterLocation": [
                4,
                4
            ]
        },
        "serialNumber": "VAH4635AB1496"
    },

[jasonacox]

It looks like you put the polling for those in the telegraf.local file and were using this url:

http://pypowerwall:8675/vitals

Do you see a NEURIO section in vitals?