If a feature is not marked, leave it as the default.
In this section, configure the alerting for different system indicators.
The HamTrunk™ is a standalone single-site system, so it operates in site trunking.Turn off that indicator so the radio does not constantly remind you of this fact.
On this page, configure whether emergency signalling may be received. Emergency signalling is allowed on HT-Test.
On this page, configure an emergency signalling profile. Emergency signalling is allowed on HT-Test.
In this section, configure basic system parameters like the system ID, connect tone, and radio/subscriber ID.
Although the HamTrunk™ is a standalone single-site system, Motorola subscribers only show RSSI (signal strength) when they are set to SmartZone coverage.
In this section, configure the OBT bandplan for the system.
In this section, configure the control channels for the system.
In this section, configure the channel bandwidth for the system.
Two Trunking Personalities are created, the first one for HT-Primary, and the second for HT-Test.
This allows experimental features like emergency signalling, messages, and statuses to be enabled only on HT-Test.
In this section, configure the emergency profile for the personality.
Emergency signalling is NOT allowed on HT-Primary.
Emergency signalling is allowed on HT-Test.
In this section, configure the HT-ATG announcement group.
In this section, configure the talkgroup ID.
In this section, configure the private call and call alert settings for the personality.
In this section, configure support for messages and statuses for the personality.
Messages and statuses are NOT allowed on HT-Primary.
Messages and statuses are allowed on HT-Test.
On this page, configure the channel assignments for the radio.
