ZBT-1 blog additions (#35128)

source/_posts/2024-10-02-connect-zbt1-issue-and-replacement.markdown

@@ -11,9 +11,9 @@ og_image: /images/blog/2024-10-zbt1-issue/art.jpg
 ---
 <img src='/images/blog/2024-10-zbt1-issue/art.jpg' alt="Home Assistant Connect ZBT-1 issue and replacement">
 
-We've found an issue in Home Assistant Connect ZBT-1 that has affected a small number of customers, which appears to be the result of a faulty part incorporated in the most recent batch of ZBT-1 devices. We want to make sure everyone can get a replacement ZBT-1 and ensure they are covered far into the future.
+We've found an issue in Home Assistant Connect ZBT-1 that has affected a small number of customers, which appears to be the result of a faulty part incorporated in the first production run of ZBT-1 devices. We want to make sure everyone can get a replacement ZBT-1 and ensure they are covered far into the future.
 
-Though Home Assistant SkyConnect is identical to the ZBT-1 under the hood, it is not affected. The design is not what's at fault, but instead, a defective voltage regulator that was used in this specific batch that is causing the issue. When a ZBT-1 is inserted into certain USB-A ports, the voltage regulator can fail, fully bricking the device. We used high-quality manufacturing and quality control in this and previous batches. We are undertaking an investigation to find out how this could happen and most importantly, to avoid a repeat of anything remotely similar in the future.
+Though Home Assistant SkyConnect is identical to the ZBT-1 under the hood, it is not affected. The design is not what's at fault, but instead, a defective voltage regulator that was used in this specific production run that is causing the issue. When a ZBT-1 is inserted into certain USB-A ports, the voltage regulator can fail, fully bricking the device. We used high-quality manufacturing and quality control in this and previous production runs. We are undertaking an investigation to find out how this could happen and most importantly, to avoid a repeat of anything remotely similar in the future.
 
 We're sorry for any inconvenience this may cause you. Below are details on our investigation, how devices are affected, and the replacement program.
 - [Background](#background)
@@ -33,7 +33,10 @@ When we opened them, we found a dead voltage regulator. The mark in the outer ca
 
 We replaced the voltage regulator on the devices we tested, and the devices sprang back to life. We found our culprit, but why was it failing? As mentioned, the SkyConnect internal design and the manufacturing were effectively identical to the ZBT-1, and we received no reports of any such failures in the literally tens of thousands of them in the wild. In manufacturing runs there is always a little variance, and in this run, something went wrong with the voltage regulator that was sourced - again, we're looking into this.
 
-It took us a couple of weeks to replicate the problem with our own units. We went down some wrong paths, but eventually found it was triggered only by certain devices, specifically certain desktop PCs (internally, we have only found one desktop that causes this failure). We have not observed the failure occur when the device has only been connected to a Home Assistant Green, Raspberry Pi, or even a Mac. If you have plugged your ZBT-1 into a different device, specifically a desktop PC, and it is not recognized by that system, inspect it for this deformation pictured above. Obviously, we want you to be able to use the device with any hardware, and even if only a small number of devices from this batch have reported issues, it is still unacceptable to us.
+<img src='/images/blog/2024-10-zbt1-issue/skyconnect-zbt1.png' style='border: 0;box-shadow: none;' alt="SkyConnect (left) and ZBT-1 (right)">
+<p style="text-align: center; font-size: 0.9rem;">SkyConnect (left) and ZBT-1 (right) branded devices, SkyConnect are unaffected by this issue.</p>
+
+It took us a couple of weeks to replicate the problem with our own units. We went down some wrong paths, but eventually found it was triggered only by certain devices, specifically certain desktop PCs (internally, we have only found one desktop that causes this failure). We have not observed the failure occur when the device has only been connected to a Home Assistant Green, Raspberry Pi, or even a Mac. If you have plugged your ZBT-1 into a different device, specifically a desktop PC, and it is not recognized by that system, inspect it for this deformation pictured above. Obviously, we want you to be able to use the device with any hardware, and even if only a small number of devices from this production run have reported issues, it is still unacceptable to us.
 
 ## Pausing sales
 
@@ -47,6 +50,10 @@ If you have purchased Home Assistant Connect ZBT-1, we are working on a replacem
 
 It is a core value of ours to do things as sustainably as possible, and that's why we've provided such a long coverage period. We want to give owners with working ZBT-1s, who do not expect to use the device in a different system for the foreseeable future, the ability to keep it operating with peace of mind.
 
+{% note %}
+All ZBT-1 branded devices produced, as of October 2024, are believed to have this fault. You can tell if your device is a ZBT-1 by checking the white label on the back for “ZBT-1”. There is no need to test if your device is affected by this fault.
+{% endnote %}
+
 If it's working, keep it plugged into the device it's working with, and don't worry about a replacement until you need it. If you need or want a replacement, please contact the seller where you purchased your device, and they will arrange the return process and replacement. Replacement devices are expected by early November, and we will be prioritizing people with non-functioning devices.
 
 ## Conclusion