diff --git a/concepts/more-arrays/.meta/config.json b/concepts/more-arrays/.meta/config.json
new file mode 100644
index 00000000..ba6f6e5a
--- /dev/null
+++ b/concepts/more-arrays/.meta/config.json
@@ -0,0 +1,10 @@
+{
+  "authors": [
+    "glennj"
+  ],
+  "contributors": [
+    "kotp",
+    "IsaacG"
+  ],
+  "blurb": "More about Arrays in Bash programs."
+}
diff --git a/concepts/more-arrays/about.md b/concepts/more-arrays/about.md
new file mode 100644
index 00000000..e787f792
--- /dev/null
+++ b/concepts/more-arrays/about.md
@@ -0,0 +1,3 @@
+# About
+
+TODO
diff --git a/concepts/more-arrays/introduction.md b/concepts/more-arrays/introduction.md
new file mode 100644
index 00000000..b130f933
--- /dev/null
+++ b/concepts/more-arrays/introduction.md
@@ -0,0 +1,230 @@
+# More about Arrays
+
+We were introduced to arrays in the [Arrays][arrays] chapter.
+This document will show more ways to use arrays.
+
+## Concatenating the Elements of an Array into a Single String
+
+In the previous Arrays chapter, you saw `"${myarray[@]}"`, with the `@` index, to expand the array into the individual elements.
+But sometimes you want to join all the elements into a single string.
+For this, use the `*` index:
+
+```bash
+echo "${myarray[*]}"
+```
+
+You are required to enclose the expansion in double quotes.
+
+Bash uses the _first character_ of the `IFS` builtin variable as the separator character.
+By default, `$IFS` consists of space, tab and newline.
+
+```bash
+myarray=(one two three four)
+mystring="${myarray[*]}"
+declare -p mystring
+# => declare -- mystring="one two three four"
+```
+
+We can manipulate the `IFS` variable to use a different separator character:
+
+```bash
+myarray=(one two three four)
+IFS=","
+mystring="${myarray[*]}"
+declare -p mystring
+# => declare -- mystring="one,two,three,four"
+```
+
+~~~~exercism/advanced
+We can encapsulate this into a function.
+
+```bash
+join() {
+    local IFS=$1
+    shift
+    local elements=("$@")
+    echo "${elements[*]}"
+}
+
+join ":" "${myarray[@]}"     # note, the "@" index
+# => "one:two:three:four"
+```
+
+Localizing `IFS` in the function means we don't have to save the old value and restore it back to it's previous value in the global scope.
+
+As a refinement, the special parameter `"$*"`, when quoted, has the same functionality so we don't need to save a copy of the function's arguments:
+
+```bash
+join() {
+    local IFS=$1
+    shift
+    echo "$*"
+}
+```
+~~~~
+
+## Array Slices
+
+You may have seen the `"${variable:offset:length}"` [parameter expansion][parameter-expansion] that expands into a _substring_ of the variable's value.
+We can do the same thing with arrays to expand a slice of the array.
+
+```bash
+myarray=(one two three four)
+
+subarray=("${myarray[@]:0:2}")
+declare -p subarray         # => subarray=([0]="one" [1]="two")
+
+subarray=("${myarray[@]:1:3}")
+declare -p subarray         # => subarray=([0]="two" [1]="three" [2]="four")
+```
+
+Omitting the length part means "from the offset to the end of the array":
+
+```bash
+subarray=("${myarray[@]:2}")
+declare -p subarray         # => subarray=([0]="three" [1]="four")
+```
+
+## Passing an Array to a Function
+
+This is not as straightforward as other languages you might be know.
+There are 3 techniques to pass an array to a function, and only one of them allows you to "mutate" the array that was passed.
+
+### Pass the Elements
+
+In the first technique, you just pass the array's values and collect them into a local array in the function.
+
+```bash
+myfunc() {
+    local array_copy=("$@")
+    # do stuff with array_copy
+    declare -p array_copy
+}
+
+array_original=(11 22 33 44)
+myfunc "${array_original[@]}"
+```
+
+The function's array holds a copy of the values.
+Any changes made to the array in the function are not reflected in the outer scope.
+
+### Pass the Array Name
+
+For these two techniques, you pass the array _name_ as a string.
+
+#### 1. Using Indirect Expansion
+
+Suppose you have variable `x=5` and variable `y=x`, and you want to use the `y` variable to get the value `5`.
+Some other languages let you do `$$y` but not Bash.
+Bash has a technique called **indirect expansion** (described in the manual in [Shell Parameter Expansion][parameter-expansion]).
+In bash, this uses the `!` character in a different way than we have seen before:
+
+```bash
+x=5
+y=x
+echo "the value is ${!y}"
+```
+
+We will use this technique to pass the array _name_ to the function, and indirectly access the values to make a copy them
+
+```bash
+myfunc() {
+    local array_name=$1
+    local temp="${array_name}[@]"
+    local array_copy=("${!temp}")
+    # do stuff with array_copy
+    declare -p array_copy
+}
+
+array_original=(11 22 33 44)
+myfunc "array_original"
+```
+
+This technique is quite messy.
+The `temp` variable will contain the _string_ `"array_original[@]"`.
+Then the indirect expansion expands to the global array's values.
+
+The function's array holds a copy of the values.
+Any changes made to the array in the function are not reflected in the outer scope.
+
+#### 2. Using a "nameref" Variable
+
+This technique is more like the "pass by reference" capability you might be used to.
+We will pass the array name to the function.
+The function will create a local variable with the "nameref" attribute.
+This local array and the global array (whose name we passed in) are _the same array_.
+
+```bash
+myfunc() {
+    local -n local_array=$1
+    # do stuff with local_array
+    # we can mutate it
+    local_array+=(55 66 77)
+}
+
+array_original=(11 22 33 44)
+myfunc "array_original"
+
+# show the mutated array
+declare -p array_original
+# => declare -a array_original=([0]="11" [1]="22" [2]="33" [3]="44" [4]="55" [5]="66" [6]="77")
+```
+
+Namerefs also work with associative arrays, and "scalar" variables (that contain a string value).
+
+~~~~exercism/note
+Inside the function, `declare -p local_array` is not extremely helpful.
+It will just emit `declare -n local_array="array_original"`.
+You can get the detailed information about the array by inspecting the passed-in array name: `declare -p "$1"`
+~~~~
+
+~~~~exercism/caution
+Take care that the local array has a different name than the passed-in array.
+The code will still work, but it will emit "circular name reference" warnings like this:
+
+```bash
+myfunc() {
+    local -n a=$1
+    local IFS=,
+    echo "${a[*]}"
+}
+
+# same name as the function's local variable
+a=(one two three)
+myfunc a
+```
+
+```none
+bash: local: warning: a: circular name reference
+bash: warning: a: circular name reference
+bash: warning: a: circular name reference
+bash: warning: a: circular name reference
+one,two,three
+```
+~~~~
+
+## The Positional Parameters are "Array-like"
+
+In shells that aim to conform to the POSIX standard only (such as `ash` and `dash`), there are no arrays.
+The closest you can get is to use the positional parameters.
+
+* The positional parameters are accessed by index: `$1`, `$2`, etc.
+* They are expanded into individual elements with `"$@"`
+* They are concatenated into a single string with `"$*"`
+* The number of parameters is `$#`
+
+Use the `set` command to assign values to them:
+
+```sh
+set -- one two three
+set -- "$@" four
+
+for item in "$@"; do
+    echo "do something with $item"
+done
+```
+
+If your goal is to write "portable" shell scripts, you'll use the positional parameters to store a "list" of values.
+
+[arrays]: https://exercism.org/tracks/bash/concepts/arrays
+[parameter-expansion]: https://www.gnu.org/software/bash/manual/bash.html#Shell-Parameter-Expansion
diff --git a/concepts/more-arrays/links.json b/concepts/more-arrays/links.json
new file mode 100644
index 00000000..ed8d8fad
--- /dev/null
+++ b/concepts/more-arrays/links.json
@@ -0,0 +1,10 @@
+[
+  {
+    "url": "https://www.gnu.org/software/bash/manual/bash.html#Arrays",
+    "description": "\"Arrays\" in the bash manual"
+  },
+  {
+    "url": "https://mywiki.wooledge.org/BashGuide/Arrays",
+    "description": "\"Arrays\" in the Bash Guide"
+  }
+]
diff --git a/config.json b/config.json
index 4322c00f..602a8e7c 100644
--- a/config.json
+++ b/config.json
@@ -1284,6 +1284,11 @@
       "uuid": "386b48d3-da82-448f-8607-8251367eb695",
       "slug": "arithmetic",
       "name": "Arithmetic"
+    },
+    {
+      "uuid": "6bfdc749-a40e-44a8-b26b-a402ba53624b",
+      "slug": "more-arrays",
+      "name": "More about Arrays"
     }
   ],
   "key_features": [