Update index.md

src/docs/devices/KinCony-KC868-A4/index.md

@@ -1,7 +1,7 @@
 ---
 title: KinCony KC868-A4
 date-published: 2023-04-19
-type: relay
+type: automate
 standard: global
 board: esp32
 ---
@@ -41,20 +41,30 @@ board: esp32
 ## Basic Configuration
 
 ```yaml
-# Basic Config
+# Basic Config by Gaetan Caron
+
+substitutions:
+  number: "1"
+  device_name: kc868-a4-${number}
+  device_description: Kincony kc868-a4 
+  friendly_name: kc868-a4 ${number}
+
 esphome:
-  name: kc868-a4
-  platform: ESP32
+  name: ${device_name}
+  comment: ${device_description}
+esp32:
   board: esp32dev
 
 # Enable logging
 logger:
 
 # Enable Home Assistant API
 api:
+  encryption:
+    key: "your api key"
 
 ota:
-  password: "4d5a388de4f759bf88e71cde7a31af6f"
+  password: "your ota password"
 
 wifi:
   ssid: "KinCony"
@@ -63,38 +73,57 @@ wifi:
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:
     ssid: "Kc868-A4 Fallback Hotspot"
-    password: "QOU4hbAjJ5Wb"
-
+    password: "1234Ab"
+text_sensor:
+  - platform: wifi_info
+    ip_address:
+      name: ESP IP Address
+    ssid:
+      name: ESP Connected SSID
+    bssid:
+      name: ESP Connected BSSID
+    mac_address:
+      name: ESP Mac Wifi Address
 captive_portal:
 
+one_wire:
+#enable temperature bus
+  - platform: gpio
+    pin: 13
+
 switch:
   - platform: gpio
-    name: "light1"
+    name: "Relay 1"
     pin: 2
     inverted: false
 
   - platform: gpio
-    name: "light2"
+    name: "Relay 2"
     pin: 15
     inverted: false
 
   - platform: gpio
-    name: "light3"
+    name: "Relay 3"
     pin: 5
     inverted: false
 
   - platform: gpio
-    name: "light4"
+    name: "Relay 4"
     pin: 4
     inverted: false
+# enable use of internal buzzer
+  - platform: gpio
+    id: buzzer
+    name: "buzzer" 
+    pin: 18
 
 binary_sensor:
   - platform: gpio
     name: "input1"
     pin:
       number: 36
       inverted: true
-
+  
   - platform: gpio
     name: "input2"
     pin:
@@ -112,4 +141,117 @@ binary_sensor:
     pin:
       number: 14
       inverted: true
+# enable use of internal button
+  - platform: gpio
+    pin: 
+      number: 0 
+      inverted: true
+      mode: INPUT_PULLUP
+    name: "PCB Button"
+
+sensor:
+# statistic sensor for convenience
+  - platform: uptime
+    name: ${friendly_name} Uptime
+    unit_of_measurement: minutes
+    filters:
+      - lambda: return x / 60.0;
+
+  - platform: wifi_signal
+    name: ${friendly_name} Signal
+    update_interval: 60s
+
+#ds18b20 on temperature external bus
+  - platform: dallas_temp
+    address: #sensor address
+    resolution: 12
+    name: "t#1"
+    accuracy_decimals: 3
+    update_interval: 1000ms
+#analog input, calibrate with your board
+  - platform: adc
+    pin: 32
+    attenuation: auto
+    name: "Ain 3"
+    filters:
+      - calibrate_linear:
+         method: exact
+         datapoints:
+          # Map sensor value vs true value to calibrate volt
+          - 0.07 -> 0.0
+          - 0.24 -> 0.347
+          - 3.13 -> 4.65
+    update_interval: 1s
+
+  - platform: adc
+    pin: 33
+    attenuation: auto
+    name: "Ain 4"
+    filters:
+      - calibrate_linear:
+         method: exact
+         datapoints:
+          # Map sensor value vs true value to calibrate volt
+          - 0.07 -> 0.0
+          - 0.24 -> 0.347
+          - 3.13 -> 4.65
+    update_interval: 1s
+
+  - platform: adc
+    pin: 34
+    attenuation: auto
+    unit_of_measurement: "Ma"
+    name: "Ain 1"
+    filters:
+      - calibrate_linear:
+         method: exact
+         datapoints:
+         # Map sensor value vs true value to calibrate current
+          - 0.07 -> 0.0
+          - 0.34 -> 2.24
+          - 3.03 -> 20.12
+    update_interval: 1s
+
+
+  - platform: adc
+    pin: 35
+    attenuation: auto
+    unit_of_measurement: "Ma"
+    name: "Ain 2"
+    filters:
+      - calibrate_linear:
+         method: exact
+         datapoints:
+          # Map sensor value vs true value to calibrate current
+          - 0.07 -> 0.0
+          - 0.34 -> 2.24
+          - 3.03 -> 20.12
+    update_interval: 1s
+
+
+#dac use basic
+output:
+
+  - platform: esp32_dac
+    pin: 25
+    id: "Aout1"
+
+  - platform: esp32_dac
+    pin: 26
+    id: "Aout2"
+
+light:
+
+  - platform: monochromatic
+    output: Aout1
+    name: "Aout1"
+    gamma_correct: 0
+    id: Aout_1
+
+
+  - platform: monochromatic
+    output: Aout2
+    name: "Aout2"
+    gamma_correct: 0
+    id: Aout_2
 ```