README.md

TSC2046_kernel_driver

Driver for the TSC2046 Touchscreen controller.

• Built for the BeagleBone Blue

Check out This article here for documentation.

Installation

1. Install Pre-reqs
   • linux-headers-`uname –r`
2. Make this project
   • cd to project directory and type make
3. Turn it on
   • While in the project dir type ./on.sh
4. To turn in off
   • While in the project dir type ./off.sh

What are on.sh and off.sh

These two files configure the beaglebone's pinmux to let the SPI1 bus be used as an SPI bus.

Default pins

• SPI1.2 port
• GP1_3 pin