Build 3173 - Version 3.15.3

• Fix: Broken start-up ping in 3.15.2

• Fix: Ecowitt historic catch-up when expected data is missing

• Fix: Disabling the Third Party HTTP Seconds upload no longer requires a restart of CMX

• Change: Ecowitt historic catch-up now applies a 5 minute offset to the received data

Build 3171 - Version 3.15.2

• Fix: Broken start-up ping in 3.15.1

Build 3170 - Version 3.15.1

• Fix: Changes to the initial ping delay

• Fix: Remove duplicated Records Set Timeout setting in Station Settings/General/Advanced

• Fix: Some HTTP Ecowitt stations not sending yearlyrainin - try and use totalrainin for these

• Change: Tweak to the ET calculation

• Change: Improved WeatherLink.com status message logging

• Change: The Ecowitt GW1000 station has been renamed to "Ecowitt Local API" to better reflect the applicability to a range of devices

  • The Ecowitt local API remains the preferred method of connection over HTTP (Ecowitt)

Build 3169 - Version 3.15.0

• Fix: Prevent real time processing occurring before first data has been received

• Fix: Davis WLL: Add missing decode of THSW from current data

• Fix: Daily high humidex time being logged as high apparent temp time

• Change: Leaf wetness web tags <#LeafWetness[1-8]> now accept the rc and dp parameters

• Change: Davis WLL: Now fetches temperature data every 10 seconds instead of 60 seconds

• New: Adds experimental support for Ecowitt stations (GW1000 & HTTP) historic catch-up

• New: HTTP (Ecowitt) station: adds support for WS990 battery state decoding

• New: Additional web tag for annual ET total <#AnnualET>

Build 3162 - Version 3.14.2

• Fix: Dayfile viewer/editor header for log date changed year format to correct value = "dd/mm/yy"

• Fix: HTTP stations now ignore any inbound data until any required pre-processing is complete

• Fix: Removal of old log files from the /MXdiags folder now ignores log files created by other utilities

• Fix: Davis WLL: Adds missing health data decode for soil/leaf transmitters, and adds SuperCap voltage for Vue transmitters

• Fix: GW1000 & HTTP Ecowitt: Wind speed handling now consistent across both protocols

• Fix: Davis VP2: Fix USB/Serial stations stopping polling when connection is temporarily lost

• Change: Davis WLL: Davis leaf wetness sensors now log values as decimals when reporting

• New: Third party uploads to WOW can now include soil temperature from any chosen sensor

• New: Adds additional units to the JSON data files - "windrun", "soilmoisture", "co2", "leafwet", and "aq"

Build 3160 - Version 3.14.1

• Fix: Davis WLL stations recording zero values if the WLL sends "null" for a value

• Fix: Dashboard Alarm settings screen now correctly shows the Sound Enabled flags

• Fix: Dashboard Historic charts nor correctly removes the Temperature Sum chart

• Change: Ecowitt GW1000 discovery mechanism updated

• New: The Solar calculation now allows you to input different transparency values for July and August. MX uses a cosine interpolation between the two values
  There are changes to cumulus.ini to accommodate this.
  [Solar]
  RStransfactor=0.8 Removed
  BrasTurbidity=2.0 Removed
  RStransfactorJul=0.8 New
  RStransfactorDec=0.8 New
  BrasTurbidityJul=2.0 New
  BrasTurbidityDec=2.0 New

Build 3159 - Version 3.14.0

• Fix: Uncaught exception in SFTP Interval uploads

• Fix: Endless loop during end of day processing if temperature sensor is missing

• Fix: GW1000, HTTP Ecowitt and HTTP Ambient stations are no longer forced to disable the "Use Speed for Avg" setting

• Fix: WMR928 Station: Crash opening invalid COM port now handled correctly

• Change: Cumulus MX now uses .Net Framework 4.8 (previously 4.5.2)

• Change: Now supports TLS1.3 for HTTPS/FTPS/MQTT/Email - dependent on OS support and enabled

• Change: MySQL server connection check amended to attempt to work around issues with some servers

• Change: The data stopped, and sensor contact lost alarms are now enabled by default for new installs (both with 1 hour latch, and 2 event trigger)

• Change: The records editors and records pages in the dashboard now display dashes for records yet to be set

• Change: The monthly log file and extra log file file editors now accept a date range rather than showing a whole month at a time

Build 3154 - Version 3.13.8

• Fix: Error in GW1000 LiveData decoding

Build 3153 - Version 3.13.7

• Fix: Davis stations not retrieving 10 min Gust values from LOOP2 packets

• Fix: HTTP Ecowitt stations not decoding user temp sensors (HTTP Ecowitt Extra did)

• Fix: Culture Option to remove spaces from dates

• Change: Writes to log files are now retried twice if they fail the first time

• New: adds support for Ecowitt WH90 sensor battery status

Build 3152 - Version 3.13.6

• Fix: HTTP Ecowitt decode of leaf wetness sensors again

• Fix: HTTP Ecowitt/Ambient - Remove soil temperature from extra sensor settings

• Fix: Davis VP2 station sending zero values for soil temp instead of 255 when no sensor present

• Fix: Long standing bug in Davis VP2/Vue & WLL stations where the day rollover during catch-up was performed after the monthly log entry rather than before

• Fix: Small tweaks to the ET calculation

• Fix: Davis VP2 console uses 16 bit signed value for Total Packets Received - compensate for it overflowing in CMX

• New: Program Settings now allows you to over-ride the default date separator string for your locale. This will be useful for those locales that under
  Mono now use a date separator such as ". " and you want it to use "."

• Change: Cumulus will now still parse the dates/times in dayfile.txt and monthly logs even if the locale changes

• Change: FO Station will now ignore UV-I values greater than 16