Replies: 574 comments 61 replies
-
https://www.bosch-mobility-solutions.com/en/products-and-services/passenger-cars-and-light-commercial-vehicles/connectivity-solutions/central-gateway/ |
Beta Was this translation helpful? Give feedback.
-
Same here. I hope someone do something about this security(?) system. |
Beta Was this translation helpful? Give feedback.
-
According to a Renault employee, the recently released cars have the gateway locked. I tried coding through ddt4all but stopped writing step. Has anyone solved it? |
Beta Was this translation helpful? Give feedback.
-
You need to connect can lines directly from BCM, not OBD to avoid CGW. |
Beta Was this translation helpful? Give feedback.
-
Any walkthrough about it? |
Beta Was this translation helpful? Give feedback.
-
Was wondering if it was possible, is it working ? If so, you just have to connect CANH/CANL lines from OBD adapter directly to CANH/CANL from ECU, that will bypass the gateway. You may need ECU pinouts, though |
Beta Was this translation helpful? Give feedback.
-
When you try to WRITE data to ECU, CGW makes an echo with a part of DDT4ALL write command. So the real command newer arrives to ECU correctly. If you connect CAN Lines directly to BCM then CGW will not work - because you are at internal network. and YES, I TRIED- WORKED. I tried because I sniffed the traffic and saw what CGW do and found this solution. BCM is located under left - down of steering wheel. I dont rebember the pin out but its easy to locate. |
Beta Was this translation helpful? Give feedback.
-
@pilotkalem So, If we connect to BCM; we can send write command to other ECU's on same the network too? |
Beta Was this translation helpful? Give feedback.
-
Yes, with that connection you will join internal can network so you can communicate with all other ecu's as well. I said BCM can because it the easiest location to join internal can network. |
Beta Was this translation helpful? Give feedback.
-
Does it mean that ddt4all will have write option Clio V someday? |
Beta Was this translation helpful? Give feedback.
-
Friends Clio V is there any new development regarding the problem of connecting to the vehicle? |
Beta Was this translation helpful? Give feedback.
-
There are no problems with the connection, you just have to connect the Elm directly to the body control module. |
Beta Was this translation helpful? Give feedback.
-
That's true however it's not possible to save changes. Is this still true? Or maybe I have old informations and writing is already implemented? |
Beta Was this translation helpful? Give feedback.
-
Guys, as I said before, you can WRITE parameters to Clio 5 with proper
connection - directly to bcm can lines. I tested many times.
2 Oca 2021 Cmt 04:05 tarihinde passyk <notifications@github.com> şunu yazdı:
… Friends Clio V is there any new development regarding the problem of
connecting to the vehicle?
There are no problems with the connection, you just have to connect the
Elm directly to the body control module.
That's true however it's not possible to save changes. Is this still true?
Or maybe I have old informations and writing is already implemented?
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#404 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ARUBTA4JEW7TYVV6OL6VPHTSXZWOVANCNFSM4OCB4W2A>
.
|
Beta Was this translation helpful? Give feedback.
-
Is there any manual how to do it? |
Beta Was this translation helpful? Give feedback.
-
Pay no attention to that as such , it just means theres like 1508 loaded ecus from the database. |
Beta Was this translation helpful? Give feedback.
-
Yeah. I'm using the exact same DDT4All 5.5.0 ALL CARS Edition as in the screenshot above. Scanning 'ALL' ECU or specifically 'CLIO V' ECU returns absolutely nothing in the field marked with 4) above. So I'm just going to assume the cable is not compatible and I need to find a better one. Do those blue ELM327 Bluetooth dongles work properly? |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
I think only through Renault Garage.
Op vr 22 dec. 2023 16:39 schreef Alex Carluccio ***@***.***>:
… Exist a way to download the update? Because my car isn’t updated since 1
year
—
Reply to this email directly, view it on GitHub
<#956 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABZJ2R4EP23D67G4EVVFXL3YKWSR5AVCNFSM6AAAAABAJ5QMQGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TSMRYHEZDM>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
yo tengo la 7773R y si funciona |
Beta Was this translation helpful? Give feedback.
-
actually come to think about it I could have read about something about the gateway being able to be bypassed but some update (either OTA or applied by CLIP by Renault Garage) after that was applied it blocked applying changes on the easylink ECU parameters - something like that. My memory is not the best some times. |
Beta Was this translation helpful? Give feedback.
-
Interesting |
Beta Was this translation helpful? Give feedback.
-
I bought the renault physical token and the SGW Unlocking software, what is the cheapest but tried VCI tool to be used, I don't want to buy bosch tool as it is very expensive. |
Beta Was this translation helpful? Give feedback.
-
Hello, everyone |
Beta Was this translation helpful? Give feedback.
-
If Tatrix cannot connect to the CGW, the CGW cannot be unlocked. |
Beta Was this translation helpful? Give feedback.
-
Try this : https://www.obd2tool.com/blog/the-steps-to-install-driver-and-configure-for-openport-2-0-j2534/ My drivers version is : 1.0.0.4227 |
Beta Was this translation helpful? Give feedback.
-
The same |
Beta Was this translation helpful? Give feedback.
-
Merhaba , i have a clio 5, 2020 |
Beta Was this translation helpful? Give feedback.
-
Is there a visual?
iOS için Outlook<https://aka.ms/o0ukef> uygulamasını edinin
…________________________________
Gönderen: matzel82 ***@***.***>
Gönderildi: Tuesday, October 8, 2024 7:40:26 AM
Kime: cedricp/ddt4all ***@***.***>
Bilgi: eminpolat85 ***@***.***>; Mention ***@***.***>
Konu: Re: [cedricp/ddt4all] Not working on Clio V (Discussion #956)
Did you try if a Renault Garage Connect the SGW ?
—
Reply to this email directly, view it on GitHub<#956 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ARLT4K5OH5B4ABGV3X7H3M3Z2NO3VAVCNFSM6AAAAABAJ5QMQGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOBXGUZTQOA>.
You are receiving this because you were mentioned.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
I'm already connecting
https://www.instagram.com/fp_elektronik/profilecard
iOS için Outlook<https://aka.ms/o0ukef> uygulamasını edinin
…________________________________
Gönderen: dongletype ***@***.***>
Gönderildi: Tuesday, October 8, 2024 5:33:52 PM
Kime: cedricp/ddt4all ***@***.***>
Bilgi: eminpolat85 ***@***.***>; Mention ***@***.***>
Konu: Re: [cedricp/ddt4all] Not working on Clio V (Discussion #956)
Did you try if a Renault Garage Connect the SGW ?
Yes they can normally with original Renault VCI
—
Reply to this email directly, view it on GitHub<#956 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ARLT4K37VB45WV33EODJYH3Z2PUNBAVCNFSM6AAAAABAJ5QMQGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOBYGEYTIOI>.
You are receiving this because you were mentioned.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
I can connect, read all the values but I cannot change any of them, i've heard it is also the case for Captur 2, both using Easy link systems. Is there a work in progress? Anything I can try? Thanks!
Beta Was this translation helpful? Give feedback.
All reactions