Replies: 8 comments 12 replies
-
Why do you this ?? It's really logical that's is happening like this... there are engineers who make radios... don't touch a running system |
Beta Was this translation helpful? Give feedback.
-
@crs-ica try with 281152288R |
Beta Was this translation helpful? Give feedback.
-
@matzel82 definitely not trying to make a debate here but these are my reasons:
@shrlnm thank you for the suggestion. I see that your code is from a factory v3 unit (LANR16). The generated commands are slightly different at few addresses. I will compare those with the commands generated in the first place and with the documentation to understand those differences. |
Beta Was this translation helpful? Give feedback.
-
These are the results of the update and the partial conclusions:
@shrlnm thank you again for your earlier reply. I will figure out how to work with doc_maker. |
Beta Was this translation helpful? Give feedback.
-
RESETTING ELM ERRORS STATISTIC error_frame = 0 RESPONSE TIME (Average) The "# * error_question = 1" should pose a problem? Where I can find more details about it? |
Beta Was this translation helpful? Give feedback.
-
No problem if it's the missing answer to STI is. |
Beta Was this translation helpful? Give feedback.
-
@crs-ica Hi, How did you update ICOM from 4992 to 5615? can you explain please? I bricked my R-Link 2 while trying to upgrade from 2.2xx to 3.3.xx without updating ICOM. Do you have any options to recover it? Thank is advance. |
Beta Was this translation helpful? Give feedback.
-
Hello , I have black screen after downgrade and usb port not worked . |
Beta Was this translation helpful? Give feedback.
-
Hello all,
I had my unit HW 1.1 updated from v2.3 to v7.
The steps were:
After this, the unit is laggy (sometimes unusable) and the connection with the NXP dsp chip seems at least incomplete (no ESE).
As I am an engineer I got to the research part and understood that I have to go to v7 (MICOM, CAN communication reason) and try to do a unit reconfiguration.
Can you please help me with this issue?
I am ready to learn how to generate the updated configuration file or give the necessary details to have it generated.
I owe an wireless ELM that seems ok till now even though I know is not the best option. At need I can buy another (wired) one.
Thank you very much for you time and help!
Beta Was this translation helpful? Give feedback.
All reactions