Remote start

[monalos]

Hello, I have the hfm sw14.45 version and I am trying to turn on the remote start feature. With_res_start is activated from the bcm/uch section, but when I come to the hfm remote start section, when I set the With_res_start_cf section correctly and click write, it gives the error in the image. How can I code? Why is this error?

[AndyIreland]

try different scenarios - try increasing 'CAN TIMEOUT' to 600ms.

Try programming with engine running.
Try programming with engine off.
Try programming with engine off but keycard in slot.
Try programming with engine off but a long press on the start button until 'remove keycard' comes up on dash or 'ACC' - but leave keycard in.
Try programming with engine off but gear selector in 1st gear (or Drive if auto gearbox)

try getting a more compatible ELM327 (one preferably with the correct PIC chip in it)

Hope this helps.

[monalos]

Thanks

I can code everything else, it only gives this error in res_ start coding. I will try what you said

ELM THİS photo

[matzel82]

How want you start remote your engine ?

[matzel82]

Sorry...this won't work

[monalos]

Why?

[matzel82]

There isn't a button to do this... I haven't seen a car with this... it's doesn't mean that you only with "coding" get this feature. You have to reprogram any ECUS. And without unlocking the Mobilizer you won't start the engine. Second you have switch APC+ to some ECUs.

[monalos]

Renault arkana , captur , talisman , dacia duster ,

These cars also have remote start. There is a 2s button on the remote control.

[monalos]

I'm not asking if this is possible right now, I'm investigating the reason why elm gives an error in ddt4all.

[AndyIreland]

What infotainment have you got on your Clio4?

If you have medianav you more than likely have to enable RES using MICOM Manager and if its a Rlink1 fitted to your Clio4 you might have to enable the setting in that too

Micom Test manager setting in Clio 4 Medianav Second edition:

[monalos]

Medinav was removed, android multimedia was installed. Is there any chance of activating it without Medineva? If it doesn't activate without Medinav, I can turn Medinav back on.

[monalos]

I enabled this setting when I first purchased Elm327. Then I closed it and when I tried to open it again, it gave the error in the first picture. Could it be from elm?

[AndyIreland]

it sounds like the cars with RES feature are cars produced in 'Cold climate countries' and is extra module fitted to those cars so maybe this why it wont enable? - just a thought.

https://lamiaclio-forumcommunity-net.translate.goog/?t=61123693&_x_tr_sl=auto&_x_tr_tl=en&_x_tr_hl=en-US&_x_tr_pto=wapp

[monalos]

Automatic operation is done through Medinav. It works automatically when it reaches the temperature you set. I'm researching how to operate it from the remote control. In cold countries, there is both automatic operation and remote control. In fact, in an article I read, it can only operate from the remote control, without Medinav.

[AndyIreland]

Renault remote control card : Starting the engine remotely:
https://youtu.be/iVOtOyyyuXs?si=AD70fiPlct9bMVEE

[monalos]

Thanks

[peace1313]

Were you able to start the engine remotely? I activated it, the calendar appeared but the feature did not work.

[monalos]

What is the uch/bcm and hfm version in the car? How did you become active?

[peace1313]

Were you able to start the engine remotely? I activated it, the calendar appeared but the feature did not work.

[monalos]

No ı dont have remote start because remote start no key

[monalos]

What is the uch/bcm and hfm version in the car? How did you become active?

[evgenybozhko2]

Haha, this feature can be activated only on CLEAN UCH ecu.

[monalos]

Which country are you in? There is no remote control in my country? Do you have whatsapp or telegram? Can I add you? we exchange ideas together

[evgenybozhko2]

Which country are you in? There is no remote control in my country? Do you have whatsapp or telegram? Can I add you? we exchange ideas together

Ukraine. And yes, no remotes. All changes I was made by self.

[evgenybozhko2]

How I can find you?

[evgenybozhko2]

[monalos]

This is Whatsapp number

[AndyIreland]

I have seen on one ECU (more than likely the keycard programming) in DDT4ALL settings something to say What keycard , or how many keys, are on the keycard - you might have to change that setting too , to get RES working

[monalos]

Bir ECU'da (büyük ihtimalle anahtar kartı programlamasında) DDT4ALL ayarlarında anahtar kartında hangi anahtar kartının veya kaç anahtarın olduğunu söyleyen bir şey gördüm - RES'in çalışmasını sağlamak için bu ayarı da değiştirmeniz gerekebilir

Yes, I also saw a setting that says which of the 4 added keys should do the remote start.