Replies: 5 comments 24 replies
-
|
you have to disconnect from your home wifi internet router and then select wifi OBD2 before starting DDT4ALL - if it says 'this wifi has no internet connection do you still want to connect' select 'yes' |
Beta Was this translation helpful? Give feedback.
-
|
I am disconnected from any other wifi. I am connected only to the obd2 adapter. It's very strange. |
Beta Was this translation helpful? Give feedback.
-
|
Do you have same problem with pyren and python 2 https://gitlab.com/py_ren/pyren or pyren and python 3 https://gitlab.com/py_ren/pyren/-/tree/pyren3?ref_type=heads or ddt4all and python 2 https://github.com/cedricp/ddt4all/releases/tag/1.5 ? |
Beta Was this translation helpful? Give feedback.
-
|
yeah, i would like to make it show the real value. It's very annoying for me |
Beta Was this translation helpful? Give feedback.
-
Did you first let the ECU find by using the magnifying glass or just select the TCU manually. have you increased the millisecond figure of the CAN timeout to say 600ms ? also there are odometer settings in the Brake/ESC ECU settings too i think you will find. Sometimes you can only change the odometer when the car has only done a few Km's - afterwards you cannot change it with DDT4ALL. |
Beta Was this translation helpful? Give feedback.
-
|
I did not try anything that you say and I don't see any maginfying glass. In TDB>CLuster is the only place where i found odometer, at least for megane 3 ph1. |
Beta Was this translation helpful? Give feedback.
-
the Magnifying glass - you really should always try this to find your particular ECU's for your car instead of randomly picking out ECU's manually if you can. Be safer |
Beta Was this translation helpful? Give feedback.
-
self.hdr.settimeout(5) I meant the timeout value. |
Beta Was this translation helpful? Give feedback.
-
@InsanityM has your wi-fi ELM adaptor got a PIC18F25K80 chip in it or is it a chinese clone? |
Beta Was this translation helpful? Give feedback.
-
|
I have no idea. I checked once with elm327 identifier and it said that is a genuine one. I think it is a clone, but a good one. How can i verify? At least ddt4all is working now. |
Beta Was this translation helpful? Give feedback.
-
|
Does anyone know if this cable is genuine? https://www.amazon.com/stores/page/78EC7ADA-504E-47FE-A437-81398859DA84?channel=obdlink-buy-sx&tag=obdlink-buy-sx-20&linkCode=ur2 |
Beta Was this translation helpful? Give feedback.
-
Hi, i am back again with another issue. I can't make pyren to work. I installed it, i have the database, i installed python 2.7.18, but when i run PYREN.BAT it can't find python.exe, but it is installed in C drive. I am trying this on windows 10, maybe i shoud try in linux. If i run _pyren_launcher.py, then it loads the database, i can choose my car, but after that the window is closing. |
Beta Was this translation helpful? Give feedback.
-
|
Nvm. I found out. All i had to do was to copy python folder in pyren folder. |
Beta Was this translation helpful? Give feedback.
-
|
Hi there, I actually have the same issue you initially had. My OBD device isn't connecting to my Mac, and I just get stuck in an infinite loading loop. My device works perfectly with the iOS app, and I'm trying to connect to the same IP/port. I suspect my ELM327 adapter is a Chinese copy (I bought it on Amazon), but I don't know how to verify that. Do I need to modify some files as you did? For your information, I didn't run the script to install dependencies; I just installed what was needed until the app ran. |
Beta Was this translation helpful? Give feedback.
-
|
my obdlink sx made no connection with soft ddt4all, how can i fix the problem of connection |
Beta Was this translation helpful? Give feedback.
-
|
you will have to take the trouble to read https://github.com/cedricp/ddt4all?tab=readme-ov-file#supported-diagnostic-adapters-so-far It's not just coming here to complain that it doesn't work, without even having read it. |
Beta Was this translation helpful? Give feedback.
-
|
if is a CANKWP |
Beta Was this translation helpful? Give feedback.
-
Hi, i have a problem. I can't connect to my wifi elm327. I tried on both windows and linux and the results are the same. It's stuck on " trying to open port 192.168.0.10:35000 @XXXXXXX". I get no errors, it is just stuck on trying to open the port. The same happens in windows. I can connect to the adapter with android and with a different app
Beta Was this translation helpful? Give feedback.
All reactions