Megane 3 - EOL Settings after reset configuration

[wotekPL]

Hi,

i reset the configuration on my Rlink in Megane 3 and now i get message "Please Add Settings" so can i repair without clip and reprog or clip is the last chance?

[AndyIreland]

did you press the soft reset or hard reset button?
Is it rlink 1 or rlink2 in your Megane?

[wotekPL]

I press reset configuration

[AndyIreland]

is it rlink1 tomtom or is it rlink2 rlink fitted to your megane ?

[wotekPL]

OMG :D Sorry. It's a Megane 3 with Rlink 1

[AndyIreland]

ah right thanks. I have repaired my rlink1 in my renault zoe once when it had EOL triangle before with DDT4ALL by filling in settings.
Its a bit difficult to explain , but if you have a elm327 bluetooth OBD 2 and the specially wired cable to read the rlink through the OBD2 port and a windows laptop and can get an internet signal on your laptop inside your car I can log on over the internet and have a look remotely from my end to see what settings are filled in and see if i can see other settings missing if you like, if you want me to just let me know.

[wotekPL]

Yes Sure!
Now cannot turn on radio and navigation :(

I have clip or ddt4all.

Do you think we can do anything else?

If i change bic to old version screen can turn on but with information abaout settings. If i change bic to newer version then i cannot turn on and if i click eject disk then led blink 10x.

[wotekPL]

Ok. Actually info about EOL is back.

[wotekPL]

@AndyIreland how can i launch firmware from your post. I format sd card in FAT32 but software not launched?
I copy file tomtom.000 but canot launch this.

[wotekPL]

@cedricp, @shrlnm

Software Number is a 333C and ddt4all cannot autoidenty version MFD so how can i overwrite this row?

[AndyIreland]

OK , so on my Renault Zoe I have a 'Home' button next to the touch screen itself - i dont know how the Megane 3 is configured with its buttons but i pressed the Home button on mine with 5 pushes with the tomtom.000 file on the card inserted and it started to load the firmware. My Zoe does not have a BIC unit in it like yours so you will have to make sure that is configured as well I think because sometimes when you press the 'reset software' in the mfd settings it can erase settings in BIC as well I think.

other things you can try is that if the MFD does not auto find in DDT4ALL you have to set it manually choosing MFD 5.4 from the list then choose your settings then press home button 5 times or 'hard reset' within DDT4ALL to reboot the rlink

Another thing you could try is formatting a 8gb USB stick to Fat32 copy over the tomtom.000 file to it and try putting that into usb socket of car and see if that starts loading the software

[wotekPL]

Ok could you show me screen with all data?

What can i generate VechicleIdentifier im BIC configuration?

Screen here #92 (comment)

[wotekPL]

Yes, i try with pendrive format to FAT32 and new card with format. Maybe i format card with map and then copy tomtom.000 to card? What do you think?

[AndyIreland]

No, i would just copy the TomTom file to fresh SD card not the map card.

Try use this tomtom.000 file its 11.346 version
https://we.tl/t-GCzQGyQoK3

[wotekPL]

Eh, unfortunately but i put card or USB stick and nothing happend.

[AndyIreland]

Eh, unfortunately but i put card or USB stick and nothing happend.

ah right it must be because the radio is in EOL mode then it cannot boot SD card.

i cannot really think of anything else then apart from manually selecting MFD 5.4 in DDT4ALL and filling out all the parameters that you can and see if that works - hard to tell what is going on without seeing for myself what is filled out and what is not , and I can only really look if I can log on remotely over the internet.

[Valentino2891]

Can someone help me, I can't figure out whether to use the cmd_10 and cmd_76 macros on the can bus or can2?

[shrlnm]

I can't figure out whether to use the cmd_10 and cmd_76 macros on the can bus or can2?

It may depends on platform of car. Look at the name of macro generated by pyren_bot. If it contains can then the macro for a main CAN bus. If the filename contains can2 then the macro for multimedia CAN bus.

Anyway, nothing wrong will happen if you'll try to implement it on wrong CAN bus. It just won't connect to the module.

[Valentino2891]

Дякую

[AndyIreland]

CAN2 (and CAN-HI) is the rlink radio CAN

[Valentino2891]

Rlink earned after applying the cmd_10 script, went to reboot and started, everything works!
Thank you very much…

[LemurMort]

Hello!
Is it to late to join here? :)
I'm also getting a triangle and a message 'Radio not configured' after reset configuration.

I opened a new thread not being aware this one's opened: #815

I only have DDT4ALL.
Can someone help by explaining the steps I need to take?

Thanks in advance!

[shrlnm]

@LemurMort what the problem to install pyren3? I may suggest only this instruction https://www.drive2.ru/b/643019689764615344/ based on pyren

[busta6]

No, i would just copy the TomTom file to fresh SD card not the map card.

Try use this tomtom.000 file its 11.346 version https://we.tl/t-GCzQGyQoK3

Hello, could you share the link of this update, it does not appear available on the Renault page, thanks

[Sankyjdm]

@shrlnm can you help me please, I have the same problem
Vin: VF1KZ030H54916711

[shrlnm]

@Sankyjdm the pyren bot is working now so you may do according this article
https://www.drive2.ru/b/643019689764615344/

[Sankyjdm]

Thank you

[Assh1358]

Hi
I have similar problem, my radio is work, but I don't have any sound in speakers. Only an intermittent beeping sound comes from the speakers. I open the radio settings, select the default settings (factory) option, after confirming the return to factory settings, the radio does not react. My car is Renault Fluence Bose version 2015 model
Vin: vf1lzlct1fc288501
Please help me

[matzel82]

You can disconnect You battery

[Assh1358]

You can disconnect You battery
I did that but nothing changed

[AndyIreland]

Hi I have similar problem, my radio is work, but I don't have any sound in speakers. Only an intermittent beeping sound comes from the speakers. I open the radio settings, select the default settings (factory) option, after confirming the return to factory settings, the radio does not react. My car is Renault Fluence Bose version 2015 model Vin: vf1lzlct1fc288501 Please help me

@Assh1358 -
Rlink1 is it? - when it was beeping i reckon all you had to do was press the home button 5 times to restart the rlink and then possibly put in the radio unlock code.

So what are you left with now at present on your screen , is it triangle and EOL message or is screen blank now?

what was you originally try to do? - add android auto to your rlink1 was it?

[AlMeu]

As I know there in R-Link 1 is not unlock code, but perhaps is something new.