Renault twingo 3 tpms light #1197
-
|
Hello! How can I remove tpms light from renault twingo 3 dashboard? Please help!
|
Beta Was this translation helpful? Give feedback.
Replies: 2 comments 6 replies
-
|
hello there - first things first , I am not sure but is your car being a Twingo3 a late registration car if it is the OBD2 port may be blocked by security gateway that you need to get unlocked by Token at the garage before any changes can be made to the cluster. Secondly I dont know what cluster version shows up when you do a search with the magnifying glass , but here I have given this one x07 v4.1 as an example: |
Beta Was this translation helpful? Give feedback.
-
|
strange would have thought it did. Did you press the prise en compte Button after you changed the settings? and also you have disabled TPMS in other areas of ECU's like BCM/UCH ? Are you trying to 'Disable TPMS' on your car, or are you just looking to keep TPMS on your car but just extinguish the waring lamp? - it sounds to me like you are trying to disable TPMS but i could be wrong. |
Beta Was this translation helpful? Give feedback.
-
|
I didn't disable tpms in BCM/UHC, I will try that! |
Beta Was this translation helpful? Give feedback.
-
|
And yeah I am trying to get rid of it. |
Beta Was this translation helpful? Give feedback.
-
|
yeah you want to set this to '0' (presuming your BCM/UCH version is SW15 0 SW15 - do a scan with magnifying glass to get your correct BCM UCH for your car)
|
Beta Was this translation helpful? Give feedback.
-
|
Thanks! Problem solved! Thank you for the help😊 |
Beta Was this translation helpful? Give feedback.
-
|
If it does concern a Twingo 3 model (With the separate round DRL Lights)
then it can be reset by pressing the up and down buttons for a few seconds
on the right side handle.
This should clear the current warning state of the TPMS.
…On Tue, Aug 13, 2024 at 9:26 PM Andy Robus ***@***.***> wrote:
hello there - first things first , I am not sure but is your car being a
Twingo3 a late registration car if it is the OBD2 port may be blocked by
security gateway that you need to get unlocked by Token at the garage
before any changes can be made to the cluster.
Secondly I dont know what cluster version shows up when you do a search
with the magnifying glass , but here I have given this one as an example.
image.png (view on web)
<https://github.com/user-attachments/assets/3bb521f5-cb4c-4625-9872-fafa73080043>
—
Reply to this email directly, view it on GitHub
<#1197 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AGAB3XS7N2NBOF2XOX4NKPDZRJMURAVCNFSM6AAAAABMOW7AR2VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMZSHE3TGNI>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
yeah you want to set this to '0' (presuming your BCM/UCH version is SW15 0 SW15 - do a scan with magnifying glass to get your correct BCM UCH for your car)