Skip to content

Latest commit

 

History

History
24 lines (15 loc) · 826 Bytes

README.md

File metadata and controls

24 lines (15 loc) · 826 Bytes
Raw

ESP-IDF Queue example

This example shows how you use a queues in ESP-IDF. In this example we create a single queue through which we pass a message_t struct. We also create a consumer_task and a producer_task to demonstrate how you can use tasks.

Prerequisites

This project uses Platformio, so make sure you have it installed.

Building and running

To build this project just issue the command:

pio run

In order to build the project, upload it to the ESP32 and start the serial monitor, you can use the command:

pio run -t upload -t monitor

If the platformio tool cannot find the correct serial device you may have to modify the platformio.ini file or provide a serial device on the command line with --upload-port and --upload-port*.