sudo apt-get update
sudo apt-get install -y lirc
Append the following config in /etc/modules
lirc_dev
lirc_rpi gpio_in_pin=18 gpio_out_pin=17
set following config in /etc/lirc/hardware.conf
# /etc/lirc/hardware.conf
#
# Arguments which will be used when launching lircd
LIRCD_ARGS="--uinput"
#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD=false
#Don't start irexec, even if a good config file seems to exist.
#START_IREXEC=false
#Try to load appropriate kernel modules
LOAD_MODULES=true
# Run "lircd --driver=help" for a list of supported drivers.
#DRIVER="UNCONFIGURED"
DRIVER="default"
# usually /dev/lirc0 is the correct setting for systems using udev
DEVICE="/dev/lirc0"
MODULES="lirc_rpi"
# Default configuration files for your hardware if any
LIRCD_CONF=""
LIRCMD_CONF=""
Append following config /etc/lirc/lirc_options.conf
driver = default
device = /dev/lirc0
Append following config /boot/config.txt
dtoverlay=lirc-rpi,gpio_in_pin=18,gpio_out_pin=17
copy raspberry-confg/lircd/clim.lircd.conf in /etc/lirc/lircd.conf
restart device
Setup Python3
apt-get install python3
Copy api/climate_api dir in /usr
set proper owner : sudo chown -R pi:pi /usr/climate_api/
Setup dependancies
pip install -r /usr/climate_api/requirements.txt
- Copy systemd/climate-controller.service in /etc/systemd/system
- Copy systemd/climate-controller-start.sh in
/usr/bin - Launch
sudo systemctl daemon-reload