Tasmota Zigbee Always Can not Start

[vensolezl]

I have a sonoff zb brigde pro device that was previously successfully flashed to tasmota firmware.
The zigbee module in the device started normally, and I was able to brush in the latest tasmota version and successfully update the znp firmware.
Then zigbee in the module can not start normally, I looked up some information, but always can not find the possible problem.
Can someone help me tell me what the possible cause is? thanks!
The following is the startup log of the system:

[s-hadinger]

Set log to weblog 3 and report back logs

[vensolezl]

Thank you for your professional reply, I really did not realize this before, let me try some configuration. By the way, how can these devices be automatically configured when PANids exist in the environment?

[vensolezl]

I tried the following, first typing ZbConfig, but I got these results.
I then used the ZBconfig command and restarted Tasmota, and the device still didn't start as expected, which was really weird.

14:11:28.749 CMD: ZbConfig
14:11:28.750 SRC: Serial
14:11:28.751 CMD: Grp 0, Cmd 'ZBCONFIG', Idx 1, Len 0, Pld -99, Data ''
14:11:28.754 RSL: RESULT = {"Command":"Unknown","Input":"ZBCONFIG"}
14:14:18.607 CMD: ZbConfig {"Channel":12,"PanID":"0x1ABC","ExtPanID":"0xDDCCCCCCCCCCCCAA","KeyL":"0xFF0D0B0907050301","KeyH":"0xED0C0A0806040200"}
14:14:18.620 SRC: WebConsole from 10.0.0.171
14:14:18.621 CMD: Grp 0, Cmd 'ZBCONFIG', Idx 1, Len 119, Pld -99, Data '{"Channel":12,"PanID":"0x1ABC","ExtPanID":"0xDDCCCCCCCCCCCCAA","KeyL":"0xFF0D0B0907050301","KeyH":"0xED0C0A0806040200"}'
14:14:18.626 RSL: RESULT = {"Command":"Unknown","Input":"ZBCONFIG {"Channel":12,"PanID":"0x1ABC","ExtPanID":"0x"}
14:14:32.757 CMD: restart 1
14:14:32.758 SRC: WebConsole from 10.0.0.171
14:14:32.760 CMD: Grp 0, Cmd 'RESTART', Idx 1, Len 1, Pld 1, Data '1'
14:14:32.762 RSL: RESULT = {"Restart":"Restarting"}
00:00:00.002 HDW: ESP32-D0WD-V3 v3.1
00:00:00.021 UFS: FlashFS mounted with 4400 kB free
00:00:00.035 CFG: Loaded from File, 数量: 25
00:00:00.043 QPC: Count 1
00:00:00.044 CFG: CR 342/699, Busy 0
00:00:00.046 TYA: Active=0
00:00:00.048 ROT: Mode 1
00:00:00.073 CFG: No '*.autoconf' file found
00:00:00.076 BRY: Berry initialized, RAM used 3478 bytes
00:00:00.082 BRY: No 'preinit.be'
00:00:00.085 ZIG: Using Hardware Serial UART2
00:00:00.085 SRC: Restart
00:00:00.087 项目: tasmota - Tasmota 版本 14.3.0(tasmota)-3_1_0(2024-12-10T16:01:47)
00:00:00.088 ZIG: Loading Zigbee data
00:00:00.093 ZIG: No Zigbee device information
00:00:00.096 ZIG: No Zigbee device data
00:00:00.097 ZIG: ZbLoad '<internal_plugin>' loaded successfully
00:00:00.143 BRY: No 'autoexec.be'
00:00:00.279 WIF: 尝试连接...
00:00:01.000 WIF: 连接到 AP1 RAX50 Channel 8 BSSId 74:D0:2B:28:3D:5B 模式: HT40 名称: tasmota-E8FF34-7988...
00:00:01.038 WIF: IPv4 10.0.0.209, mask 255.255.255.0, gateway 10.0.0.1
00:00:02.936 WIF: 已连接
00:00:03.298 RTC: UTC 2024-12-19T13:14:39Z, DST 2024-03-31T02:00:00, STD 2024-10-27T03:00:00
14:14:39.001 RTC: Synced by NTP
14:14:39.011 HTP: Web 服务器地址: tasmota-E8FF34-7988 IP 地址: 10.0.0.209
14:14:39.138 WIF: IPv6 Local fe80::1206:1cff:fee8:ff34%st1
14:14:40.203 RSL: INFO1 = {"Info1":{"Module":"ESP32-DevKit","Version":"14.3.0(tasmota)","FallbackTopic":"cmnd/DVES_E8FF34_fb/","GroupTopic":"cmnd/tasmotas/"}}
14:14:40.206 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-E8FF34-7988","IPAddress":"10.0.0.209","IP6Global":"","IP6Local":"fe80::1206:1cff:fee8:ff34%st1"}}
14:14:40.207 RSL: INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":15}}
14:14:42.959 QPC: Reset
14:14:43.436 WIF: IPv6 Global 2001:250:5403:420:1206:1cff:fee8:ff34
14:14:44.953 APP: 启动次数 15
14:14:44.956 RSL: STATE = {"Time":"2024-12-19T14:14:44","Uptime":"0T00:00:09","UptimeSec":9,"Heap":157,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":21,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":40},"Wifi":{"AP":1,"SSId":"RAX50","BSSId":"74:D0:2B:28:3D:5B","Channel":8,"Mode":"HT40","RSSI":100,"Signal":-47,"LinkCount":1,"Downtime":"0T00:00:03"}}
14:14:45.808 CFG: Saved, 数量: 26, 大小: 4096
14:14:51.569 ZIG: rebooting ZNP device
14:14:54.071 ZIG: {"ZbZNPReceived":"4180000201020701"}
14:14:54.072 RSL: RESULT = {"ZbState":{"Status":1,"Message":"CCxxxx ZNP booted","RestartReason":"Power-up","MajorRel":2,"MinorRel":7}}
14:14:54.220 ZIG: checking device configuration
14:14:54.221 ZIG: ZbZNPSent 2102
14:14:54.271 ZIG: {"ZbZNPReceived":"6102020102070146D9340100"}
14:14:54.272 RSL: RESULT = {"ZbState":{"Status":50,"MajorRel":2,"MinorRel":7,"MaintRel":1,"Revision":20240710}}
14:14:54.273 ZIG: ZbZNPSent 2108600000
14:14:54.320 ZIG: {"ZbZNPReceived":"6108000155"}
14:14:54.321 ZIG: ZbZNPSent 2108870000
14:14:54.370 ZIG: {"ZbZNPReceived":"6108000100"}
14:14:54.371 ZIG: ZbZNPSent 2108830000
14:14:54.420 ZIG: {"ZbZNPReceived":"61080002FFFF"}
14:14:54.422 RSL: RESULT = {"ZbState":{"Status":2,"Message":"Resetting configuration"}}
14:14:54.423 ZIG: ZbZNPSent 21090300000103
14:14:54.470 ZIG: {"ZbZNPReceived":"610900"}
14:14:54.471 ZIG: ZbZNPSent 410000
14:14:56.871 ZIG: {"ZbZNPReceived":"4180000201020701"}
14:14:56.872 ZIG: ZbZNPSent 2109830000020100
14:14:56.920 ZIG: {"ZbZNPReceived":"610900"}
14:14:56.921 ZIG: ZbZNPSent 21092D00000800000000CCCCCCCC
14:14:56.970 ZIG: {"ZbZNPReceived":"610900"}
14:14:56.971 ZIG: ZbZNPSent 21098400000400080000
14:14:57.020 ZIG: {"ZbZNPReceived":"610900"}
14:14:57.021 ZIG: ZbZNPSent 21098700000100
14:14:57.070 ZIG: {"ZbZNPReceived":"610900"}
14:14:57.071 ZIG: ZbZNPSent 210962000010000034FF00000000000034FF00000000
14:14:57.120 ZIG: {"ZbZNPReceived":"610900"}
14:14:57.121 ZIG: ZbZNPSent 21096300000100
14:14:57.190 ZIG: {"ZbZNPReceived":"610900"}
14:14:57.192 ZIG: ZbZNPSent 210901010020FFFFFFFFFFFFFFFF5A6967426565416C6C69616E636530390000000000000000
14:14:57.220 ZIG: {"ZbZNPReceived":"610902"}
14:14:57.221 ZIG: ZbZNPSent 21098F00000101
14:14:57.270 ZIG: {"ZbZNPReceived":"610900"}
14:14:57.271 ZIG: ZbZNPSent 2107600001000100
14:14:57.320 ZIG: {"ZbZNPReceived":"610700"}
14:14:57.321 ZIG: ZbZNPSent 21096000000155
14:14:57.370 ZIG: {"ZbZNPReceived":"610900"}
14:14:57.371 ZIG: ZbZNPSent 2108620000
14:14:57.421 ZIG: {"ZbZNPReceived":"61080010000034FF00000000000034FF00000000"}
14:14:57.422 RSL: RESULT = {"ZbState":{"Status":3,"Message":"Configured, starting coordinator"}}
14:14:57.424 ZIG: ZbZNPSent 2F080100080000
14:14:57.470 ZIG: {"ZbZNPReceived":"6F0800"}
14:14:57.471 ZIG: ZbZNPSent 2F080000080000
14:14:57.520 ZIG: {"ZbZNPReceived":"6F0800"}
14:14:57.521 ZIG: ZbZNPSent 2F0504
14:15:00.770 ZIG: {"ZbZNPReceived":"6F0500"}
14:15:00.820 ZIG: {"ZbZNPReceived":"4F80010204"}
14:15:01.020 ZIG: {"ZbZNPReceived":"45C008"}
14:15:03.070 ZIG: {"ZbZNPReceived":"45C008"}
14:15:03.385 ZIG: {"ZbZNPReceived":"45C008"}
14:15:03.920 ZIG: {"ZbZNPReceived":"45C000"}
14:15:03.970 ZIG: {"ZbZNPReceived":"4F80080200"}
14:15:04.020 ZIG: {"ZbZNPReceived":"4F80080200"}
14:15:20.820 ZIG: timeout, goto label 99
14:15:20.821 RSL: RESULT = {"ZbState":{"Status":99,"Message":"Abort"}}
14:15:20.823 ZIG: Abort
14:15:20.823 ZIG: Stopping (99)

[s-hadinger]

Hmmm. ZbConfig must be used before the coordinator tries to run, so in the first 15 seconds. This is not ideal, but it's the case for now

[vensolezl]

That's not a big problem, at least it solved my problem and confusion, thank you very much, do you have any suggestions on how to automatically generate panID?

[s-hadinger]

Why would you generate it automatically? Just take a new random number. It's a one-off.