Waveshare 2 or 4 Port RS485 Converter

[MrJoki007]

This converter should work two right?
https://www.amazon.de/Waveshare-2-CH-RS485-Converter-Independent/dp/B0CC25WLNJ/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1CWZTL3FBWQ2M&keywords=2-Ch+RS485+to+RJ45+Ethernet&qid=1705741513&sprefix=2-ch+rs485+to+rj45+ethernet+%2Caps%2C481&sr=8-3

It has two RS485 ports and a build in ethernet switch. So it would suit the application perfectly.

Anotherone could be the four port one, if you want to monitor your battery two.

https://www.amazon.de/Waveshare-Independent-Bi-Directional-Transparent-Transmission/dp/B0CQYGWBMZ/ref=sr_1_4?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=32XYG5PNQ99WW&keywords=waveshare+rs485+4ch&qid=1705737302&sprefix=waveshare+rs485+4+ch%2Caps%2C107&sr=8-4

[alienatedsec]

It's unlikely to work the same way. The server-client logic between RS485 master and slave would need to be managed on the same device, which I don't think is possible.

Did you buy it? If so, can you share any screenshots of the config webpage?

[alienatedsec]

@MrJoki007

It looks like the latest firmware - is connecting to port 3389 not working?

[MrJoki007]

Solis is over the waveshare adapter
test is, when i try to connect directly to the DLS-L

[alienatedsec]

@MrJoki007 Unlucky

[MrJoki007]

Yes, but i think the solution with the dual wireshark module is very cool and it works well

[SmileyMan]

Confirm this works.