Sisyfos Audio Controller

Audiomixer control build with the logic from a videomixer.

You use the fader for the level, and PGM on/off for fade-in/out. TAKE crossfades between PGM & PST:

Snaps takes preset into PST:

Install:

git clone https://github.com/olzzon/producers-audio-mixer.git
cd producers-audio-mixer
yarn
yarn start

Settings:

(Mixer presets are stored in MixerProtocolPresets.js)

Following preset name are possible:

• reaper
  • OSC protocol for control Reaper (reaper.fm)
• Ardour Master
  • OSC protocol for Ardour (www.ardour.org)
  • Port 3819
  • The volume change in Ardour is on it´s channel faders.
  • Todo:
    • Group support
    • Meter calibration
• Midas Master
  • OSC protocol for Midas M32 and Behringer X32
  • Port 10023
  • The volume change on the Midas/X32 desk is on it´s channel faders.
• Midas Client
  • OSC protocol for Midas M32 and Behringer X32
  • Port 10023
  • Route ch 1-16 to bus 1-2 and in main turn off main stereo
  • Set send to Bus 1-2 to Post Fader on all channels
  • Link Bus 1-2 to stereo and in main turn on main stereo
  • Send to Bus 1-2 is then used for Fade In-Out
  • Be aware of post faders mix% issues.
• Behringer xr client
  • OSC protocol for Behringer XR12-16-18
  • Port 10024
  • Route ch 1-16 to bus 1-2 and in main turn off main stereo
  • Set send to Bus 1-2 to Post Fader on all channels
  • Link Bus 1-2 to stereo and in main turn on main stereo
  • Send to Bus 1-2 is then used for Fade In-Out
• Behringer xr master
  • OSC protocol for Behringer XR12,16,18
  • Port 10024
  • In this version the Behringer is slave of Producers-Audio-mixer, so faders on the behringer is turned down when channel is of.
• midi
  • Generic MIDI - still preminilary

Automation Support:

It´s possible to control the Producers-Audio-Mixer from an automationsystem, for it to act as middleware.

Set state:

To set the state send these OSC commands from you Automation to ProducersAudioMixer Port: 5255:

Set channel to PGM:

/ch/1/mix/pgm - integer: { 0 or 1 }

Set channel to PST:

/ch/1/mix/pst - integer: { 0 or 1 }

Set channel faderlevel:

/ch/1/mix/faderlevel - float {between 0 and 1}

Set group to PGM:

/grp/1/pgm - integer: { 0 or 1 }

Set group to PST:

/grp/1/pst - integer: { 0 or 1 }

Set group faderlevel:

/grp/1/faderlevel - float {between 0 and 1}

Crossfade between PGM and PST:

/take

Set snap 1-xx to PST:

/snap/1

Fade all channels to black (mute)

/fadetoblack

Hide or show channel strips on GUI:

/ch/{value1}/visible - integer { 0 or 1 }

Hide or show group strips on GUI:

/grp/{value1}/visible - integer { 0 or 1 }

Get state:

Get state channel PGM:

/state/ch/1/mix/pgm - returns pgm state integer { 0 or 1 }

get state channel PST:

/state/ch/1/mix/pst - returns pgm state integer { 0 or 1 }

Get state channel faderlevel:

/state/ch/1/mix/faderlevel - float {between 0 and 1}

Get state group PGM:

/state/ch/1/mix/pgm - returns pgm state integer { 0 or 1 }

get state group PST:

/state/ch/1/mix/pst - returns pgm state integer { 0 or 1 }

Get state group faderlevel:

/state/ch/1/mix/faderlevel - float {between 0 and 1}