solace-prometheus-exporter, a Prometheus Exporter for Solace Message Brokers

Overview

The exporter is written in go, based on the Solace Legacy SEMP protocol. It grabs metrics via SEMP v1 and provide those as prometheus friendly http endpoints.

Video Intro available on youtube: Integrating Prometheus and Grafana with Solace PubSub+ | Solace Community Lightning Talk

Features

It implements the following endpoints:

http://<host>:<port>/                    Document page showing list of endpoints
http://<host>:<port>/metrics             Golang and standard Prometheus metrics
http://<host>:<port>/solace-std          legacy, via config: Solace metrics for System and VPN levels
http://<host>:<port>/solace-det          legacy, via config: Solace metrics for Messaging Clients and Queues
http://<host>:<port>/solace-broker-std   legacy, via config: Solace Broker only Standard Metrics (System)
http://<host>:<port>/solace-vpn-std      legacy, via config: Solace Vpn only Standard Metrics (VPN), available to non-global access right admins
http://<host>:<port>/solace-vpn-stats    legacy, via config: Solace Vpn only Statistics Metrics (VPN), available to non-global access right admins
http://<host>:<port>/solace-vpn-det      legacy, via config: Solace Vpn only Detailed Metrics (VPN), available to non-global access right admins
http://<host>:<port>/solace              The modular endpoint

Modular endpoint explained

Configure the data you want ot receive, via HTTP GET parameters.

The key is always the scrape target prefixed by a m..

The value contains out of 2 parts, delimited by a pipe |.

• The first part is the VPN filter.
• The second part is the ITEM filter.

Not all scrape targets support both filter. Please see scrape target to find out what is supported where.
Both filter can contain multiple asterisk * as wildcard for N chars.

Each scrape target can be used multiple times, to implement or condition filters.

Examples

Get the same result as the legacy solace-det endpoint.
http://your-exporter:9628/solace?m.ClientStats=*|*&m.VpnStats=*|*&m.BridgeStats=*|*&m.QueueRates=*|*&m.QueueDetails=*|*

Get the same result as the legacy solace-det endpoint, but only from VPN myVpn.
http://your-exporter:9628/solace?m.ClientStats=myVpn|*&m.VpnStats=myVpn|*&m.BridgeStats=myVpn|*&m.QueueRates=myVpn|*&m.QueueDetails=myVpn|*

Get all queue information, where the queue name starts with BRAVOor ARBON and only from VPN myVpn. http://your-exporter:9628/solace?m.QueueStats=myVpn|ARBON*&m.QueueStats=myVpn|BRAVO*&m.QueueDetails=myVpn|ARBON*&m.QueueDetails=myVpn|BRAVO*

Get all queue information, where the queue name starts with BRAVOor ARBON and only from VPN where the name contains a my. http://your-exporter:9628/solace?m.QueueStats=*my*|ARBON*&m.QueueStats=*my*|BRAVO*&m.QueueDetails=*my*|ARBON*&m.QueueDetails=*my*|BRAVO*

Get all queue information, where the queue name starts with BRAVOor ARBON and only from VPN where the name contains a my and ends with and prod. http://your-exporter:9628/solace?m.QueueStats=*my*prod|ARBON*&m.QueueStats=*my*prod|BRAVO*&m.QueueDetails=*my*prod|ARBON*&m.QueueDetails=*my*prod|BRAVO*

Get the same result as the legacy solace-det endpoint, but from a specific broker.
http://your-exporter:9628/solace?m.ClientStats=*|*&m.VpnStats=*|*&m.BridgeStats=*|*&m.QueueRates=*|*&m.QueueDetails=*|*&scrapeURI=http://your-broker-url:8080

Scrape targets

scrape target	vpn filter supports	item filter supported	performance impact	corresponding cli cmd	supported by
Version	no	no	dont harm broker	show version	software, appliance
Health	no	no	dont harm broker	show system health	software
StorageElement	no	yes	dont harm broker	show storage-element storageElementFilter	software
Disk	no	no	dont harm broker	show disk detail	appliance
Memory	no	no	dont harm broker	show memory	software, appliance
Interface	no	yes	dont harm broker	show interface interfaceFilter	software, appliance
GlobalStats	no	no	dont harm broker	show stats client	software, appliance
Spool	no	no	dont harm broker	show message-spool	software, appliance
Redundancy (only for HA broker)	no	no	dont harm broker	show redundancy	software, appliance
ConfigSyncRouter (only for HA broker)	no	no	dont harm broker	show config-sync database router	software, appliance
Replication (only for DR broker)	no	no	dont harm broker	show replication stats	software, appliance
Vpn	yes	no	dont harm broker	show message-vpn vpnFilter	software, appliance
VpnReplication	yes	no	dont harm broker	show message-vpn vpnFilter replication	software, appliance
ConfigSyncVpn (only for HA broker)	yes	no	dont harm broker	show config-sync database message-vpn vpnFilter	software, appliance
Bridge	yes	yes	dont harm broker	show bridge itemFilter message-vpn vpnFilter	software, appliance
VpnSpool	yes	no	dont harm broker	show message-spool message-vpn vpnFilter	software, appliance
Client	yes	yes	may harm broker if many clients	show client itemFilter message-vpn vpnFilter connected	software, appliance
ClientSlowSubscriber	yes	yes	may harm broker if many clients	show client itemFilter message-vpn vpnFilter slow-subscriber	software, appliance
ClientStats	yes	no	may harm broker if many clients	show client itemFilter stats (paged)	software, appliance
ClientMessageSpoolStats	yes	no	may harm broker if many clients	show client itemFilter stats(paged)	software, appliance
VpnStats	yes	no	has a very small performance down site	show message-vpn vpnFilter stats	software, appliance
BridgeStats	yes	yes	has a very small performance down site	show bridge itemFilter message-vpn vpnFilter stats	software, appliance
QueueRates	yes	yes	DEPRECATED: may harm broker if many queues	show queue itemFilter message-vpn vpnFilter rates count 100 (paged)	software, appliance
QueueStats	yes	yes	may harm broker if many queues	show queue itemFilter message-vpn vpnFilter rates count 100 (paged)	software, appliance
QueueDetails	yes	yes	may harm broker if many queues	show queue itemFilter message-vpn vpnFilter detail count 100 (paged)	software, appliance
TopicEndpointRates	yes	yes	DEPRECATED: may harm broker if many topic-endpoints	show topic-endpoint itemFilter message-vpn vpnFilter rates count 100 (paged)	software, appliance
TopicEndpointStats	yes	yes	may harm broker if many topic-endpoint	show topic-endpoint itemFilter message-vpn vpnFilter rates count 100 (paged)	software, appliance
TopicEndpointDetails	yes	yes	may harm broker if many topic-endpoints	show topic-endpoint itemFilter message-vpn vpnFilter detail count 100 (paged)	software, appliance
ClusterLinks	yes	yes	dont harm broker	show the state of the cluster links. Filters are for clusterName and linkName	software, appliance

Broker Connectivity Metric

No matter which combination of targets and filters you're using, there is always one metric available that will show the success (or failure) when trying to connect to the Solace broker.

# HELP solace_up Was the last scrape of Solace broker successful.
# TYPE solace_up gauge
solace_up{error=""} 1

If any problem arises while querying the broker, the metric value will become 0 and the label will show the most recent error as shown in the following examples:

solace_up{error="Get \"http://localhost:8080/SEMP\": dial tcp 127.0.0.1:8080: connect: connection refused"} 0
solace_up{error="HTTP status 401 (Unauthorized)"} 0
...

Modular endpoint configs

If you want to keep the endpoint urls short, you can configure endpoints via ini file.

[endpoint.solace-det]
ClientStats=*|*
VpnStats=*|*
BridgeStats=*|*
QueueRates=*|*
QueueDetails=*|*

This will provide a new endpoint.
http://your-exporter:9628/solace-det

This will provide the same output as:
http://your-exporter:9628/solace?m.ClientStats=*|*&?m.VpnStats=*|*&?m.BridgeStats=*|*&?m.QueueRates=*|*&?m.QueueDetails=*|*

If you want to use wildcards to only have a subset but needs more then one wildcard, you have to add a dot and an incrementing number. Like this:

[endpoint.my-sample]
QueueRates.0=*|internal/tms/iad/*
QueueRates.1=*|bridge_*

Port registration

The registered default port for Solace is 9628

Usage

solace_prometheus_exporter -h
usage: solace_prometheus_exporter [<flags>]

Flags:
  -h, --help                     Show context-sensitive help (also try --help-long and --help-man).
      --log.level=info           Only log messages with the given severity or above. One of: [debug, info, warn, error]
      --log.format=logfmt        Output format of log messages. One of: [logfmt, json]
      --config-file=CONFIG-FILE  Path and name of config file. See sample file solace_prometheus_exporter.ini.
      --enable-tls               Set to true, to start listenAddr as TLS port. Make sure to provide valid server certificate and private key files.
      --certificate=CERTIFICATE  If using TLS, you must provide a valid server certificate in PEM format. Can be set via config file, cli parameter or env variable.
      --private-key=PRIVATE-KEY  If using TLS, you must provide a valid private key in PEM format. Can be set via config file, cli parameter or env variable.

The configuration parameters can be placed into a config file or into a set of environment variables or can be given via URL. If you use docker, you should prefer the environment variable configuration method (see below).
If the exporter is started with a config file argument then the config file entries have precedence over the environment variables. If a parameter is neither found in the URL, nor the config file nor in the environment the exporter exits with an error.

Config File

solace_prometheus_exporter --config-file=/path/to/config/file.ini

Sample config file:

[solace]
# Address to listen on for web interface and telemetry.
listenAddr=0.0.0.0:9628

# Enable TLS on listenAddr endpoint. Make sure to provide certificate and private key files. 
# can be overridden via env varibale SOLACE_LISTEN_TLS
enableTLS=true

# Path to the server certificate (including intermediates and CA's certificate)
# can be overridden via env varibale SOLACE_SERVER_CERT
certificate=cert.pem

# Path to the private key pem file
# can be overridden via env varibale SOLACE_PRIVATE_KEY
privateKey=key.pem

# Base URI on which to scrape Solace broker.
scrapeUri=http://your-exporter:8080

# Note: try with your browser, you should see the broker login page, where you can test the username and password below as well.
# Basic Auth username for http scrape requests to Solace broker.
username=admin

# Basic Auth password for http scrape requests to Solace broker.
password=admin

# Timeout for http scrape requests to Solace broker.
timeout=5s

# Flag that enables SSL certificate verification for the scrape URI.
sslVerify=false

# Flag that enables Usage of the operating system proxy configuration.
# false=No proxy will be used at all.
useSystemProxy=false

Environment Variables

Sample environment variables:

SOLACE_LISTEN_ADDR=0.0.0.0:9628
SOLACE_LISTEN_TLS=true
SOLACE_SERVER_CERT=/path/to/your/cert.pem
SOLACE_PRIVATE_KEY=/path/to/your/key.pem
SOLACE_SCRAPE_URI=http://your-broker:8080
SOLACE_USERNAME=admin
SOLACE_PASSWORD=admin
SOLACE_TIMEOUT=5s
SOLACE_SSL_VERIFY=false

URL

You can call: https://your-exporter:9628/solace?m.ClientStats=*|*&m.VpnStats=*|*&scrapeURI=https%3A%2F%2Fyour-broker%3A943&username=monitoring&password=monitoring&timeout=10s

This service grabs metrics via SEMP v1 and provide those as prometheus friendly http endpoints. This allows you to overwrite the parameters, which are in the ini-config file / environment variables:

• scrapeURI
• username
• password
• timeout

This provides you a single exporter for all your on prem broker.

Security: Only use this feature with HTTPS.

Sample prometheus config

- job_name: 'solace-std'
  scrape_interval: 15s
  metrics_path: /solace-std
  static_configs:
    - targets:
      - https://USER:PASSWORD@first-broker:943
      - https://USER:PASSWORD@second-broker:943
      - https://USER:PASSWORD@third-broker:943
  relabel_configs:
    - source_labels: [__address__]
      target_label: __param_target
    - source_labels: [__param_target]
      target_label: instance
    - target_label: __address__
      replacement: solace-exporter:9628

Build

Default Build

cd <some-directory>/solace-prometheus-exporter
go build

Docker

Build Docker Image

A build Dockerfile is included in the repository.
This is used to automatically build and push the latest image to the Dockerhub repository solacecommunity/solace-prometheus-exporter

Run Docker Image

Environment variables are recommended to parameterize the exporter in Docker.
Put the following parameters, adapted to your situation, into a file on the local host, e.g. env.txt:

SOLACE_LISTEN_ADDR=0.0.0.0:9628
SOLACE_SCRAPE_URI=http://your-broker:8080
SOLACE_USERNAME=admin
SOLACE_PASSWORD=admin
SOLACE_TIMEOUT=5s
SOLACE_SSL_VERIFY=false

Then run

docker run -d \
 -p 9628:9628 \
 --env-file env.txt \
 --name solace-exporter \
 solacecommunity/solace-prometheus-exporter

Bonus Material

The sub directory testfiles contains some sample curl commands and their outputs. This is just fyi and not needed for building.

Security

Please ensure to run this application only in a secured network or protected by a reverse proxy. It may reveal insights of your application you don`t want.
If you use the feature to pass broker credentials via HTTP body/header, you are forced to enable TLS on the listening port or to run this application within kubernetes/openshift or similar to add an HTTPS layer.

How to enable TLS

By default, the endpoint configured via listenAddr=0.0.0.0:9628 is unencrypted and served via HTTP only. To enable encryption make sure to set enableTLS=true or use the environment varibale export SOLACE_LISTEN_TLS=true or cli flag --enable-tls respectively.

TLS encryption requires you to provide two files in PEM (base64) format. You can define the path to those files in different ways:

• Server certificate (including intermediates and CA's certificate)
  • cli parameter: --certificate=cert.pem
  • environment variable: SOLACE_SERVER_CERT
  • config file: certificate=cert.pem
• Server private Key
  • cli parameter: --private-key=key.pem
  • environment variable: SOLACE_PRIVATE_KEY
  • config file: privateKey=key.pem

If you're running the exporter via Docker container, you can map the certificate files during your docker run command from the host to the container.

docker run -d \
 -p 9628:9628 \
 --env-file env.txt \
 -v ${PWD}/cert.pem:/etc/solace/cert.pem \
 -v ${PWD}/key.pem:/etc/solace/key.pem \
 [...]
 solacecommunity/solace-prometheus-exporter

Of course, make sure to set the right local paths in the env.txt provided.

SOLACE_LISTEN_TLS=true
SOLACE_SERVER_CERT=/etc/solace/cert.pem
SOLACE_PRIVATE_KEY=/etc/solace/key.pem

Resources

For more information try these resources:

• The Solace Developer Portal website at: https://solace.dev
• Ask the Solace Community

Contributing

Please read CONTRIBUTING.md for details on our code of conduct, and the process for submitting pull requests to us.

Authors

See the list of contributors who participated in this project.

License

See the LICENSE file for details.