BambuStudio SoftFever V1.4.1

Change notes:

• Added flow rate and pressure advance calibration features. for more information, refer to this Wiki page
  

• Added support for skirt height.

• Improved the display of layer time.
  For those who wonder why I am keen to add layer time visualization, check this image

• Added a feature for checking and displaying a notification for a new version
• Added RatRig printer profiles, thanks @erebus04 for working this
• Added support for the Creality CR-10 Max and Anker M5 printers.
• Fixed the issue with profile cloud syncing for third-party printers.
• set inner_wall_acceleration to 5000 for Bambu printers
• Added support for the first_layer_bed_temperature and first_layer_temperature variables for better compatibility."
• Fixed a crashing bug when adding text Mac Intel machine
• QoL improvements for naming logic:
  • The filename format is now supported when exporting 3mf files.
  • If the project is not defined, the model name will be used as the output name.
  • The "Untitled" string will no longer be added if the project name is set.
  • The "_plate_0" string has been removed from the file name if there is only one plate.

NOTE 1: For Apple users, please take a look at this article about how to run unsigned applications on your machine.

NOTE 2: Feel free to report issues/bugs/suggestions on GitHub.

---

Credits for calibration:

Flowrate test and layer time is inspired by SuperSlicer
PA Line method is inspired by K-factor Calibration Pattern
PA Tower method is inspired by Klipper
chatgpt ;)

BambuStudio SoftFever V1.4.0

Release notes:

• Add Layer Time/Layer time(Log) display (NOTE: need more tweaking work for BBL printers as the layer time is skewed by the preparing time)
• Add sandwich(inner-outer-inner-infill) mode support for Arachne engine.
• Change default wall loop from 2 to 3
• Fix an issue that the last used printer was not remembered after application restart. (Thanks Bambulab engineers, for the quick response and fixing)
• Optimized layer height sanity check logic. It will check against max_layer_height in the printer settings now. (I can use CHT 1.8 nozzle to print 1.0 mm thick layers now ;) )
• Add Prusa MINI+ profile
• expose bed_exclude_area parameter to 3rd printers
• Fix some 3rd party printer related issues introduced in BambuStudio v01.04.00.17
  1. Can't send sliced files to printers
  2. AMS filaments were added to non-Bambulab printers
  3. Wrong bed setting was applied

NOTE 1: For Apple users, please take a look at this article about how to run unsigned applications on your machine.

NOTE 2: Feel free to report issues/bugs/suggestions on GitHub.

BambuStudio SoftFever V1.4.0 beta3

Changes:

1. Fix a bug that wrong bed temperature was used for third-party printers

BambuStudio SoftFever V1.4.0 beta2

This is a maintenance release.
It merges upstream changes(BambuStudio 1.4).

Bambulab has added quite a few excellent new features in version 1.4.
You can find the changelogs here

BambuStudio SoftFever V1.3.4

Release notes:

1. Add a new printer order - sandwich mode:
   This new order is similar to the outer-wall-first mode in achieving the best dimensional accuracy. This new approach however avoids printing outer walls right after a long travel, which may cause artifacts on the surface in many cases.
   

2. Support RRF firmware(experimental)

3. Fix a compatibility issue for gcode-preview
4. Merge upstream changes

NOTE 1: For Apple users, please take a look at this article about how to run unsigned applications on your machine.

NOTE 2: Feel free to report issues/bugs/suggestions on GitHub.

BambuStudio SoftFever V1.3.3

Release notes:

1. Improve top surface quality.
   Fix a bug that internal solid infills didn't use monotonic when top surface is using monotonic lines
2. New feature: filter out tiny gaps.
   Note: for aesthetic considerations, this setting won't affect top/bottom layers. In other words, gap fills that can be seen from outside won't be filtered out
3. PA(pressure advance) now support multi-color printing. A new PA value from the selected filament profile will be applied whenever there is
   a filament/extruder change action. This change only affects multi-color printing.
4. Users can now set float values of layer time in Filament->Cooling tab.
5. Allow to set target bed temp to 0
6. Fix a bug that layer number is not displayed correctly in klipper UIs
7. Force using linear PA model when manual PA override is enabled for Bambu machines
8. Remember the last used filament
9. Skip checking BL network plugin for third-party printers.

NOTE: For Apple M1 users, please take a look at this article about how to run unsigned applications on your machine. Or better, you can build it from the source codes if you want:)

Apple requires a subscription(costs 99$ yearly) for developers to sign their app. I don't do a lot of dev work on Mac, and this is a nonprofit open-source project, so I decided not to pay the money ;)

BambuStudio SoftFever V1.3.3 beta3

Fix a regression bug found in 1.3.3 beta.

• PA was not set properly when only one filament was used.

BambuStudio SoftFever V1.3.3 beta

Changes:

1. New feature: filter out tiny gaps.
   Note: for aesthetic considerations, this setting won't affect top/bottom layers. In other words, gap fills that can be seen from outside won't be filtered out
2. PA(pressure advance) now support multi-color printing. A new PA value from the selected filament profile will be applied whenever there is a filament/extruder change action. This change only affects multi-color printing.
3. Users can now set float values of layer time in Filament->Cooling tab.

BambuStudio SoftFever V1.3.2

Changes:

• Support device control view for 3rd party printers
  Youtube video:
  

• Port Small perimeters feature from PrusaSlicer. I also add an extra option to adjust the small perimeter threshold
  You might want to reduce speed for small perimeter parts to prevent failures like bellow:
  
  

• Add fan speed preview mode
  

• Fix an issue that print time estimation is inaccurate when Klipper g-code style is used.

BambuStudio SoftFever V1.3.1

This release enhances support for 3rd party printers.
Change notes:

1. Support change bed size and nozzle diameter
2. Allow users to specify the bridge infill direction
   
   
3. Change to ISO view angle for preview image
   
   
4. Add an option to change Z Hop action: NormalLift/SpiralLift
5. Optimise g-code generation for both Bambu printers and 3rd party printers
6. Support Klipper Exclude Objects
7. Better support for Moonraker's metadata.
   

Image credits: Thanks @空白, for the screenshot of the IOS view on the X1 printer.