Wrap the usage of the DNS cache variable in if the config to enable i… #307

Workflow file for this run

	name: CI Checks

	on:
	push:
	branches: ["**"]
	pull_request:
	branches: ["**"]
	workflow_dispatch:

	env:
	bashPass: \033[32;1mPASSED -
	bashInfo: \033[33;1mWINFO -
	bashFail: \033[31;1mFAILED -
	bashEnd: \033[0m

	jobs:
	unittest:
	runs-on: ubuntu-latest
	steps:
	- name: Clone This Repo
	uses: actions/checkout@v4
	with:
	submodules: recursive

	- env:
	stepName: Install Dependencies
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	git submodule update --checkout --init --recursive
	sudo apt-get update -y
	sudo apt-get install -y lcov
	sudo apt-get install -y unifdef
	sudo apt-get install -y ninja-build

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Build Unit Tests
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	cmake -S test/unit-test -B test/unit-test/build/ -G Ninja
	cmake --build test/unit-test/build/ --target all

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Run Unit Tests
	name: ${{ env.stepName }}
	shell: bash
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	ctest --test-dir test/unit-test/build/ -E system --output-on-failure

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Test Line and Branch Coverage
	name: ${{ env.stepName }}
	shell: bash
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	cmake --build test/unit-test/build/ --target coverage

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} Built Coverage Tests ${{ env.bashEnd }}"

	lcov --list --rc lcov_branch_coverage=1 test/unit-test/build/coverage.info

	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- name: Check Coverage
	uses: FreeRTOS/CI-CD-Github-Actions/coverage-cop@main
	with:
	coverage-file: ./test/unit-test/build/coverage.info
	branch-coverage-min: 100
	line-coverage-min: 100

	spell-check:
	runs-on: ubuntu-latest
	steps:
	- name: Clone This Repo
	uses: actions/checkout@v4
	- name: Run spellings check
	uses: FreeRTOS/CI-CD-Github-Actions/spellings@main
	with:
	path: ./

	formatting:
	runs-on: ubuntu-20.04
	steps:
	- uses: actions/checkout@v4
	- name: Check formatting
	uses: FreeRTOS/CI-CD-Github-Actions/formatting@main
	with:
	path: ./

	doxygen:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@v4
	- name: Run doxygen build
	uses: FreeRTOS/CI-CD-Github-Actions/doxygen@main
	with:
	path: ./

	verify-manifest:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@v4
	with:
	submodules: true
	fetch-depth: 0

	# At time of writing the gitmodules are set not to pull
	# Even when using fetch submodules. Need to run this command
	# To force it to grab them.
	- name: Perform Recursive Clone
	shell: bash
	run: git submodule update --checkout --init --recursive

	- name: Run manifest verifier
	uses: FreeRTOS/CI-CD-GitHub-Actions/manifest-verifier@main
	with:
	path: ./
	fail-on-incorrect-version: true

	link-verifier:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@v4
	- name: Check Links
	env:
	GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
	uses: FreeRTOS/CI-CD-Github-Actions/link-verifier@main

	build-checks:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@v4
	- env:
	stepName: Build Install Dependencies
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	sudo apt-get update -y
	sudo apt-get install -y libpcap-dev

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Build checks (Enable all functionalities)
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	cmake -S . -B build -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=ENABLE_ALL
	cmake --build build --target freertos_plus_tcp_build_test

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Build checks (Enable all functionalities IPv4)
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	cmake -S . -B build -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=ENABLE_ALL_IPV4
	cmake --build build --target clean
	cmake --build build --target freertos_plus_tcp_build_test

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Build checks (Enable all functionalities IPv6)
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	cmake -S . -B build -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=ENABLE_ALL_IPV6
	cmake --build build --target freertos_plus_tcp_build_test

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Build checks (Enable all functionalities IPv4 IPv6)
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	cmake -S . -B build -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=ENABLE_ALL_IPV4_IPV6
	cmake --build build --target clean
	cmake --build build --target freertos_plus_tcp_build_test

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Build checks (Enable all functionalities IPv4 TCP)
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	cmake -S . -B build -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=ENABLE_ALL_IPV4_TCP
	cmake --build build --target clean
	cmake --build build --target freertos_plus_tcp_build_test

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Build checks (Enable all functionalities IPv6 TCP)
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	cmake -S . -B build -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=ENABLE_ALL_IPV6_TCP
	cmake --build build --target freertos_plus_tcp_build_test

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Build checks (Disable all functionalities)
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	cmake -S . -B build -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=DISABLE_ALL
	cmake --build build --target clean
	cmake --build build --target freertos_plus_tcp_build_test

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Build checks (Default configuration)
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	cmake -S . -B build -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=DEFAULT_CONF
	cmake --build build --target clean
	cmake --build build --target freertos_plus_tcp_build_test

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Build checks (Header Self Contain)
	shell: bash
	run: \|
	cmake -S . -B build -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=HEADER_SELF_CONTAIN
	cmake --build build --target clean
	cmake --build build --target freertos_plus_tcp_build_test_FreeRTOS_DHCP
	cmake --build build --target freertos_plus_tcp_build_test_FreeRTOS_DNS
	cmake --build build --target freertos_plus_tcp_build_test_FreeRTOS_IP
	cmake --build build --target freertos_plus_tcp_build_test_FreeRTOS_ND
	cmake --build build --target freertos_plus_tcp_build_test_FreeRTOS_Routing
	cmake --build build --target freertos_plus_tcp_build_test_FreeRTOS_Sockets
	cmake --build build --target freertos_plus_tcp_build_test_NetworkBufferManagement
	cmake --build build --target freertos_plus_tcp_build_test_NetworkInterface

	complexity:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@v4
	- env:
	stepName: Setup
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"
	sudo apt-get install complexity
	sudo apt-get install uncrustify
	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Complexity
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	COMPLEXITY_PARAMS="--scores --threshold=10 --horrid-threshold=283"
	TEMP_DIR=./temp
	mkdir -p ${TEMP_DIR}
	for SOURCE_FILE in source/portable/BufferManagement/.c source/.c
	do
	TARGET_DIR=${TEMP_DIR}/`dirname ${SOURCE_FILE}`
	TARGET_FILE=${TARGET_DIR}/`basename ${SOURCE_FILE}`
	mkdir -p ${TARGET_DIR}
	uncrustify -c tools/uncrustify.complexity.cfg -f ${SOURCE_FILE} > ${TARGET_FILE}
	done
	find ${TEMP_DIR} -iname '*.c' \| xargs complexity ${COMPLEXITY_PARAMS}
	RESULT=$?
	rm -rf ${TEMP_DIR}

	echo "::endgroup::"
	if [ "${RESULT}" = "0" ]; then
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"
	exit 0
	else
	echo -e "${{ env.bashFail }} Sources are too complex, rc = ${RESULT} ${{ env.bashEnd }}"
	echo -e "${{ env.bashFail }} ${{ env.stepName }} ${{ env.bashEnd }}"
	exit 1
	fi

	git-secrets:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@v4
	with:
	submodules: recursive
	- name: Checkout awslabs/git-secrets
	uses: actions/checkout@v4
	with:
	repository: awslabs/git-secrets
	ref: master
	path: git-secrets
	- env:
	stepName: Install git-secrets
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	cd git-secrets && sudo make install && cd ..

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- env:
	stepName: Run git-secrets
	name: ${{ env.stepName }}
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	git-secrets --register-aws
	git-secrets --scan

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	proof_ci:
	if: ${{ github.event.pull_request }}
	runs-on: cbmc_ubuntu-latest_16-core
	steps:
	- name: Set up CBMC runner
	uses: FreeRTOS/CI-CD-Github-Actions/set_up_cbmc_runner@main
	with:
	cbmc_version: "5.61.0"

	- env:
	stepName: Install Dependencies
	name: ${{ env.stepName }}
	shell: bash
	run: \|
	# ${{ env.stepName }}
	echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"

	git submodule update --init --checkout --recursive
	sudo apt-get update
	sudo apt-get install --yes --no-install-recommends gcc-multilib

	echo "::endgroup::"
	echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"

	- name: Run CBMC
	uses: FreeRTOS/CI-CD-Github-Actions/run_cbmc@main
	with:
	proofs_dir: test/cbmc/proofs

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Wrap the usage of the DNS cache variable in if the config to enable i… #307

Workflow file

Wrap the usage of the DNS cache variable in if the config to enable i… #307

Jobs

Run details

Workflow file for this run