From 06a6b71f8eba5e32e5e42db334ae04eccca827c8 Mon Sep 17 00:00:00 2001
From: Shannarra <petarangelov15@gmail.com>
Date: Mon, 29 Jul 2024 15:22:13 +0300
Subject: [PATCH] Remove all user actions

---
 config/initializers/devise.rb | 315 ----------------------------------
 config/routes.rb              |   1 -
 2 files changed, 316 deletions(-)
 delete mode 100644 config/initializers/devise.rb

diff --git a/config/initializers/devise.rb b/config/initializers/devise.rb
deleted file mode 100644
index b108741..0000000
--- a/config/initializers/devise.rb
+++ /dev/null
@@ -1,315 +0,0 @@
-# frozen_string_literal: true
-
-# Assuming you have not yet modified this file, each configuration option below
-# is set to its default value. Note that some are commented out while others
-# are not: uncommented lines are intended to protect your configuration from
-# breaking changes in upgrades (i.e., in the event that future versions of
-# Devise change the default values for those options).
-#
-# Use this hook to configure devise mailer, warden hooks and so forth.
-# Many of these configuration options can be set straight in your model.
-Devise.setup do |config|
-  # The secret key used by Devise. Devise uses this key to generate
-  # random tokens. Changing this key will render invalid all existing
-  # confirmation, reset password and unlock tokens in the database.
-  # Devise will use the `secret_key_base` as its `secret_key`
-  # by default. You can change it below and use your own secret key.
-  # config.secret_key = '7a8f9c1b437d1ea63af7db2bac2f2005c8c1c09236b3f3fc3d53c8a545f9b567ad86d439098a54c622c4005a59214d7c1f308d75a893c25286c377c54c52d32a'
-
-  # ==> Controller configuration
-  # Configure the parent class to the devise controllers.
-  # config.parent_controller = 'DeviseController'
-
-  # ==> Mailer Configuration
-  # Configure the e-mail address which will be shown in Devise::Mailer,
-  # note that it will be overwritten if you use your own mailer class
-  # with default "from" parameter.
-  config.mailer_sender = 'please-change-me-at-config-initializers-devise@example.com'
-
-  # Configure the class responsible to send e-mails.
-  # config.mailer = 'Devise::Mailer'
-
-  # Configure the parent class responsible to send e-mails.
-  # config.parent_mailer = 'ActionMailer::Base'
-
-  # ==> ORM configuration
-  # Load and configure the ORM. Supports :active_record (default) and
-  # :mongoid (bson_ext recommended) by default. Other ORMs may be
-  # available as additional gems.
-  require 'devise/orm/active_record'
-
-  # ==> Configuration for any authentication mechanism
-  # Configure which keys are used when authenticating a user. The default is
-  # just :email. You can configure it to use [:username, :subdomain], so for
-  # authenticating a user, both parameters are required. Remember that those
-  # parameters are used only when authenticating and not when retrieving from
-  # session. If you need permissions, you should implement that in a before filter.
-  # You can also supply a hash where the value is a boolean determining whether
-  # or not authentication should be aborted when the value is not present.
-  # config.authentication_keys = [:email]
-
-  # Configure parameters from the request object used for authentication. Each entry
-  # given should be a request method and it will automatically be passed to the
-  # find_for_authentication method and considered in your model lookup. For instance,
-  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
-  # The same considerations mentioned for authentication_keys also apply to request_keys.
-  # config.request_keys = []
-
-  # Configure which authentication keys should be case-insensitive.
-  # These keys will be downcased upon creating or modifying a user and when used
-  # to authenticate or find a user. Default is :email.
-  config.case_insensitive_keys = [:email]
-
-  # Configure which authentication keys should have whitespace stripped.
-  # These keys will have whitespace before and after removed upon creating or
-  # modifying a user and when used to authenticate or find a user. Default is :email.
-  config.strip_whitespace_keys = [:email]
-
-  # Tell if authentication through request.params is enabled. True by default.
-  # It can be set to an array that will enable params authentication only for the
-  # given strategies, for example, `config.params_authenticatable = [:database]` will
-  # enable it only for database (email + password) authentication.
-  # config.params_authenticatable = true
-
-  # Tell if authentication through HTTP Auth is enabled. False by default.
-  # It can be set to an array that will enable http authentication only for the
-  # given strategies, for example, `config.http_authenticatable = [:database]` will
-  # enable it only for database authentication.
-  # For API-only applications to support authentication "out-of-the-box", you will likely want to
-  # enable this with :database unless you are using a custom strategy.
-  # The supported strategies are:
-  # :database      = Support basic authentication with authentication key + password
-  # config.http_authenticatable = false
-
-  # If 401 status code should be returned for AJAX requests. True by default.
-  # config.http_authenticatable_on_xhr = true
-
-  # The realm used in Http Basic Authentication. 'Application' by default.
-  # config.http_authentication_realm = 'Application'
-
-  # It will change confirmation, password recovery and other workflows
-  # to behave the same regardless if the e-mail provided was right or wrong.
-  # Does not affect registerable.
-  # config.paranoid = true
-
-  # By default Devise will store the user in session. You can skip storage for
-  # particular strategies by setting this option.
-  # Notice that if you are skipping storage for all authentication paths, you
-  # may want to disable generating routes to Devise's sessions controller by
-  # passing skip: :sessions to `devise_for` in your config/routes.rb
-  config.skip_session_storage = [:http_auth]
-
-  # By default, Devise cleans up the CSRF token on authentication to
-  # avoid CSRF token fixation attacks. This means that, when using AJAX
-  # requests for sign in and sign up, you need to get a new CSRF token
-  # from the server. You can disable this option at your own risk.
-  # config.clean_up_csrf_token_on_authentication = true
-
-  # When false, Devise will not attempt to reload routes on eager load.
-  # This can reduce the time taken to boot the app but if your application
-  # requires the Devise mappings to be loaded during boot time the application
-  # won't boot properly.
-  # config.reload_routes = true
-
-  # ==> Configuration for :database_authenticatable
-  # For bcrypt, this is the cost for hashing the password and defaults to 12. If
-  # using other algorithms, it sets how many times you want the password to be hashed.
-  # The number of stretches used for generating the hashed password are stored
-  # with the hashed password. This allows you to change the stretches without
-  # invalidating existing passwords.
-  #
-  # Limiting the stretches to just one in testing will increase the performance of
-  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
-  # a value less than 10 in other environments. Note that, for bcrypt (the default
-  # algorithm), the cost increases exponentially with the number of stretches (e.g.
-  # a value of 20 is already extremely slow: approx. 60 seconds for 1 calculation).
-  config.stretches = Rails.env.test? ? 1 : 12
-
-  # Set up a pepper to generate the hashed password.
-  # config.pepper = 'd39884d280af7d313449dc14c2dc6c2ad17420137af44655ad7d6db599da486ca67153b2261cdc6bfd03ac269403e83d84c060a3251285bb1a7081b6ac4ca309'
-
-  # Send a notification to the original email when the user's email is changed.
-  # config.send_email_changed_notification = false
-
-  # Send a notification email when the user's password is changed.
-  # config.send_password_change_notification = false
-
-  # ==> Configuration for :confirmable
-  # A period that the user is allowed to access the website even without
-  # confirming their account. For instance, if set to 2.days, the user will be
-  # able to access the website for two days without confirming their account,
-  # access will be blocked just in the third day.
-  # You can also set it to nil, which will allow the user to access the website
-  # without confirming their account.
-  # Default is 0.days, meaning the user cannot access the website without
-  # confirming their account.
-  # config.allow_unconfirmed_access_for = 2.days
-
-  # A period that the user is allowed to confirm their account before their
-  # token becomes invalid. For example, if set to 3.days, the user can confirm
-  # their account within 3 days after the mail was sent, but on the fourth day
-  # their account can't be confirmed with the token any more.
-  # Default is nil, meaning there is no restriction on how long a user can take
-  # before confirming their account.
-  # config.confirm_within = 3.days
-
-  # If true, requires any email changes to be confirmed (exactly the same way as
-  # initial account confirmation) to be applied. Requires additional unconfirmed_email
-  # db field (see migrations). Until confirmed, new email is stored in
-  # unconfirmed_email column, and copied to email column on successful confirmation.
-  config.reconfirmable = true
-
-  # Defines which key will be used when confirming an account
-  # config.confirmation_keys = [:email]
-
-  # ==> Configuration for :rememberable
-  # The time the user will be remembered without asking for credentials again.
-  # config.remember_for = 2.weeks
-
-  # Invalidates all the remember me tokens when the user signs out.
-  config.expire_all_remember_me_on_sign_out = true
-
-  # If true, extends the user's remember period when remembered via cookie.
-  # config.extend_remember_period = false
-
-  # Options to be passed to the created cookie. For instance, you can set
-  # secure: true in order to force SSL only cookies.
-  # config.rememberable_options = {}
-
-  # ==> Configuration for :validatable
-  # Range for password length.
-  config.password_length = 6..128
-
-  # Email regex used to validate email formats. It simply asserts that
-  # one (and only one) @ exists in the given string. This is mainly
-  # to give user feedback and not to assert the e-mail validity.
-  config.email_regexp = /\A[^@\s]+@[^@\s]+\z/
-
-  # ==> Configuration for :timeoutable
-  # The time you want to timeout the user session without activity. After this
-  # time the user will be asked for credentials again. Default is 30 minutes.
-  # config.timeout_in = 30.minutes
-
-  # ==> Configuration for :lockable
-  # Defines which strategy will be used to lock an account.
-  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
-  # :none            = No lock strategy. You should handle locking by yourself.
-  # config.lock_strategy = :failed_attempts
-
-  # Defines which key will be used when locking and unlocking an account
-  # config.unlock_keys = [:email]
-
-  # Defines which strategy will be used to unlock an account.
-  # :email = Sends an unlock link to the user email
-  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
-  # :both  = Enables both strategies
-  # :none  = No unlock strategy. You should handle unlocking by yourself.
-  # config.unlock_strategy = :both
-
-  # Number of authentication tries before locking an account if lock_strategy
-  # is failed attempts.
-  # config.maximum_attempts = 20
-
-  # Time interval to unlock the account if :time is enabled as unlock_strategy.
-  # config.unlock_in = 1.hour
-
-  # Warn on the last attempt before the account is locked.
-  # config.last_attempt_warning = true
-
-  # ==> Configuration for :recoverable
-  #
-  # Defines which key will be used when recovering the password for an account
-  # config.reset_password_keys = [:email]
-
-  # Time interval you can reset your password with a reset password key.
-  # Don't put a too small interval or your users won't have the time to
-  # change their passwords.
-  config.reset_password_within = 6.hours
-
-  # When set to false, does not sign a user in automatically after their password is
-  # reset. Defaults to true, so a user is signed in automatically after a reset.
-  # config.sign_in_after_reset_password = true
-
-  # ==> Configuration for :encryptable
-  # Allow you to use another hashing or encryption algorithm besides bcrypt (default).
-  # You can use :sha1, :sha512 or algorithms from others authentication tools as
-  # :clearance_sha1, :authlogic_sha512 (then you should set stretches above to 20
-  # for default behavior) and :restful_authentication_sha1 (then you should set
-  # stretches to 10, and copy REST_AUTH_SITE_KEY to pepper).
-  #
-  # Require the `devise-encryptable` gem when using anything other than bcrypt
-  # config.encryptor = :sha512
-
-  # ==> Scopes configuration
-  # Turn scoped views on. Before rendering "sessions/new", it will first check for
-  # "users/sessions/new". It's turned off by default because it's slower if you
-  # are using only default views.
-  # config.scoped_views = false
-
-  # Configure the default scope given to Warden. By default it's the first
-  # devise role declared in your routes (usually :user).
-  # config.default_scope = :user
-
-  # Set this configuration to false if you want /users/sign_out to sign out
-  # only the current scope. By default, Devise signs out all scopes.
-  # config.sign_out_all_scopes = true
-
-  # ==> Navigation configuration
-  # Lists the formats that should be treated as navigational. Formats like
-  # :html should redirect to the sign in page when the user does not have
-  # access, but formats like :xml or :json, should return 401.
-  #
-  # If you have any extra navigational formats, like :iphone or :mobile, you
-  # should add them to the navigational formats lists.
-  #
-  # The "*/*" below is required to match Internet Explorer requests.
-  config.navigational_formats = ['*/*', :html, :turbo_stream] 
-
-  # config.navigational_formats = ['*/*', :html, :turbo_stream]
-
-  # The default HTTP method used to sign out a resource. Default is :delete.
-  config.sign_out_via = :delete
-
-  # ==> OmniAuth
-  # Add a new OmniAuth provider. Check the wiki for more information on setting
-  # up on your models and hooks.
-  # config.omniauth :github, 'APP_ID', 'APP_SECRET', scope: 'user,public_repo'
-
-  # ==> Warden configuration
-  # If you want to use other strategies, that are not supported by Devise, or
-  # change the failure app, you can configure them inside the config.warden block.
-  #
-  # config.warden do |manager|
-  #   manager.intercept_401 = false
-  #   manager.default_strategies(scope: :user).unshift :some_external_strategy
-  # end
-
-  # ==> Mountable engine configurations
-  # When using Devise inside an engine, let's call it `MyEngine`, and this engine
-  # is mountable, there are some extra configurations to be taken into account.
-  # The following options are available, assuming the engine is mounted as:
-  #
-  #     mount MyEngine, at: '/my_engine'
-  #
-  # The router that invoked `devise_for`, in the example above, would be:
-  # config.router_name = :my_engine
-  #
-  # When using OmniAuth, Devise cannot automatically set OmniAuth path,
-  # so you need to do it manually. For the users scope, it would be:
-  # config.omniauth_path_prefix = '/my_engine/users/auth'
-
-  # ==> Hotwire/Turbo configuration
-  # When using Devise with Hotwire/Turbo, the http status for error responses
-  # and some redirects must match the following. The default in Devise for existing
-  # apps is `200 OK` and `302 Found` respectively, but new apps are generated with
-  # these new defaults that match Hotwire/Turbo behavior.
-  # Note: These might become the new default in future versions of Devise.
-  config.responder.error_status = :unprocessable_entity
-  config.responder.redirect_status = :see_other
-
-  # ==> Configuration for :registerable
-
-  # When set to false, does not sign a user in automatically after their password is
-  # changed. Defaults to true, so a user is signed in automatically after changing a password.
-  # config.sign_in_after_change_password = true
-end
diff --git a/config/routes.rb b/config/routes.rb
index 477a7d1..d3ac34c 100644
--- a/config/routes.rb
+++ b/config/routes.rb
@@ -1,7 +1,6 @@
 # frozen_string_literal: true
 
 Rails.application.routes.draw do
-  devise_for :users
   get 'welcome/index'
 
   root 'welcome#index'