rail_xy_motor_segment_parts.scad

include <config.scad>
use <GDMUtils.scad>
use <sliders.scad>
use <joiners.scad>
use <NEMA.scad>


// connectby valid options: "", "fwd", "back"
module rail_xy_motor_segment(explode=0, connectby="")
{
	joiner_length = 8;
	side_joiner_len = 2;
	motor_width = nema_motor_width(17);

	up(
		(connectby=="fwd")? -rail_height/2 :
		(connectby=="back")? -rail_height/2 :
		0
	) back(
		(connectby=="back")? -motor_rail_length/2 :
		(connectby=="fwd")? motor_rail_length/2 :
		0
	) {
		color("SpringGreen")
		prerender(convexity=20)
		union() {
			difference() {
				union() {
					// Bottom.
					up(rail_thick/2) {
						difference() {
							union() {
								yrot(90)
									sparse_strut(h=rail_width, l=motor_rail_length, thick=rail_thick, maxang=75, strut=10, max_bridge=500);
								up((motor_top_z-motor_length+6-rail_thick)/2) {
									cube(size=[motor_mount_spacing+joiner_width, 30+20, motor_top_z-motor_length+6], center=true);
								}
							}
							cube(size=[motor_mount_spacing-joiner_width, 20, motor_length], center=true);

							// Clearance for NEMA17 stepper motor
							up(motor_top_z-rail_thick/2) {
								down(motor_length/2) {
									cube(size=[motor_width, motor_width, motor_length], center=true);
									cube(size=[20, motor_rail_length/2+10, motor_length], center=true);
								}
							}
						}
					}

					// Walls.
					zring(r=0,n=2) {
						up(rail_height/2) {
							right((rail_spacing+joiner_width)/2) {
								if (wall_style == "crossbeams")
									sparse_strut(h=rail_height, l=motor_rail_length-10, thick=joiner_width, strut=5);
								if (wall_style == "thinwall")
									thinning_wall(h=rail_height, l=motor_rail_length-10, thick=joiner_width, strut=5, bracing=false);
								if (wall_style == "corrugated")
									corrugated_wall(h=rail_height, l=motor_rail_length-10, thick=joiner_width, strut=5);
							}
						}
					}

					// Rails.
					xspread(rail_spacing+joiner_width) {
						up(rail_height+groove_height/2-0.05) {
							rail(l=motor_rail_length, w=joiner_width, h=groove_height);
						}
					}

					// Side Supports
					up(rail_height/4) {
						yspread(motor_rail_length-20) {
							cube(size=[rail_width, 5, rail_height/2], center=true);
						}
					}

					// Motor mount joiners.
					up(motor_top_z-motor_length/2) {
						xrot(90) joiner_pair(spacing=motor_mount_spacing, h=rail_height, w=joiner_width, l=motor_top_z-motor_length/2, a=joiner_angle);
					}

					// Side wiring access hole frame
					if (wall_style == "corrugated") {
						up(10/2+rail_thick) {
							xspread(rail_width-joiner_width) {
								yspread(motor_rail_length-2*28) {
									cube(size=[joiner_width, 16+4, 10+4], center=true);
								}
							}
						}
					}
				}

				// Wiring access holes.
				up(rail_height/4) {
					xspread(rail_width/3, n=3) {
						yspread(motor_rail_length-20) {
							cube(size=[16, 11, 11], center=true);
						}
					}
				}

				// Access for stepper wires.
				up(15/2) {
					cube(size=[motor_mount_spacing+joiner_width+1, 20, 15+0.05], center=true);
				}

				// Clear space for joiners.
				up(rail_height/2) {
					joiner_quad_clear(xspacing=rail_spacing+joiner_width, yspacing=motor_rail_length-0.05, h=rail_height, w=joiner_width, clearance=5, a=joiner_angle);
				}

				// Side wiring access hole
				if (wall_style != "crossbeams") {
					up(10/2+rail_thick) {
						xspread(rail_width-joiner_width) {
							yspread(motor_rail_length-2*28) {
								cube(size=[joiner_width+1, 16, 10], center=true);
							}
						}
					}
				}

				// Clear space for Side half joiners
				up(rail_height/2/2) {
					yspread(side_mount_spacing) {
						zring(r=rail_spacing/2+joiner_width+side_joiner_len-0.05, n=2) {
							zrot(-90) {
								chamfer(chamfer=3, size=[joiner_width, 2*(side_joiner_len+joiner_width/2), rail_height/2], edges=[[0,0,0,0], [1,1,0,0], [0,0,0,0]]) {
									half_joiner_clear(h=rail_height/2, w=joiner_width, a=joiner_angle);
								}
							}
						}
					}
				}
			}

			// Snap-tab joiners.
			up(rail_height/2) {
				joiner_quad(xspacing=rail_spacing+joiner_width, yspacing=motor_rail_length, h=rail_height, w=joiner_width, l=6, a=joiner_angle);
			}

			// Side half joiners
			up(rail_height/2/2) {
				yspread(side_mount_spacing) {
					zring(r=rail_spacing/2+joiner_width+side_joiner_len, n=2) {
						zrot(-90) {
							chamfer(chamfer=3, size=[joiner_width, 2*(side_joiner_len+joiner_width/2), rail_height/2], edges=[[0,0,0,0], [1,1,0,0], [0,0,0,0]]) {
								half_joiner2(h=rail_height/2, w=joiner_width, l=side_joiner_len+joiner_width/2, a=joiner_angle);
							}
						}
					}
				}
			}
		}
		up(motor_top_z-motor_length/2+explode) {
			if ($children > 0) children(0);
		}
		up(rail_height/2) {
			fwd(motor_rail_length/2+explode) {
				if ($children > 1) children(1);
			}
			back(motor_rail_length/2+explode) {
				if ($children > 2) children(2);
			}
		}
	}
}
//!rail_xy_motor_segment();



module rail_xy_motor_segment_parts() { // make me
	zrot(90) rail_xy_motor_segment();
}


rail_xy_motor_segment_parts();



// vim: noexpandtab tabstop=4 shiftwidth=4 softtabstop=4 nowrap